{"title":"Fuller Brush Parts","description":null,"products":[{"product_id":"brush-roll-brush-inserts-fuller-brush-fb-hd2t-10116","title":"Brush Roll Brush Inserts - Fuller Brush FB-HD2T","description":"\u003cp\u003eThese compatible replacement \u003cstrong\u003ebrush inserts\u003c\/strong\u003e (part #10116) are the bristle strips for the Fuller Brush FB-HD2T brush roll and related models. The inserts snap into the existing roller to renew its bristle rows.\u003c\/p\u003e\u003cp\u003eAs the bristle strips wear down, they lose the height and stiffness needed to dig into carpet, so the brush skims the surface. Replacing just the inserts is more economical than buying a whole brush roll and brings back full agitation. New strips restore proper bristle height and deep-cleaning bite.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush FBHD1, FBHD1T, FBPHD2, FBPHD2T.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e snap-in brush inserts, #10116.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e renewed bristle height at lower cost than a full roll.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e seat each strip fully so it locks flush in the roller channel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSnap in as direct-fit replacements for the worn strips. Verify your model before ordering.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48456290500858,"sku":"10.116","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/10_116.jpg?v=1785006701"},{"product_id":"fuller-brush-flat-belt-titan-t3000-upright-2-pack-17-3120-00","title":"Fuller Brush Flat Belt - Titan T3000 Upright - 2 Pack","description":"\u003cp\u003eThis OEM \u003cstrong\u003eflat belt\u003c\/strong\u003e (Part #17-3120-00, FB90) fits the Fuller Brush T3000 upright and comes in a 2-pack. The belt runs from the motor pulley to the brush roll, transferring the power that spins the brush and drives carpet agitation.\u003c\/p\u003e\u003cp\u003eFlat drive belts stretch, glaze, and crack with heat and use. A worn belt slips or breaks, so the brush roll slows or stops turning and cleaning power falls off. Replacing the belt at the first sign of stretching or cracking keeps agitation strong, and the second belt gives you a spare on hand.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush T3000 and similar models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e flat drive belt linking motor to brush roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e restored brush rotation and cleaning power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 belts per pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLoop the belt over the motor pulley and brush roll so it seats straight, and keep the second as a spare. Confirm the T3000 model before ordering, and the fresh belt returns firm drive to the brush.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48456454144250,"sku":"17-3120-00","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/17-3120-00.jpg?v=1785146972"},{"product_id":"fuller-brush-concept-elite-wtunnel-kgen-oreck-light-bulb-hoover-32-7624-2","title":"Fuller Brush Light Bulb - Fits Hoover, Oreck, Royal, Titan","description":"\u003cp\u003eThis is a replacement headlight bulb, part 32-7624-02, for the nozzle light on Fuller Brush uprights and a wide range of machines that use the same bulb and socket. It is listed for the Fuller Brush FBMMPWCF4 and FBPHD2T, for Hoover's Concept, Elite and WindTunnel lines, for Oreck uprights, and for Royal and Titan machines built on the same headlight fitting, including the Royal CR50005 and Titan T4000.\u003c\/p\u003e\u003cp\u003eA dark headlight on a running machine almost always means the bulb, not the switch or the wiring behind it. It is the simplest and cheapest thing to check first: the vacuum still cleans normally, but the beam that shows dirt and debris ahead of the nozzle goes out.\u003c\/p\u003e\u003cp\u003eSince this bulb is shared across so many brands and generations of the same nozzle design, the safest way to confirm it before ordering is to pull the existing bulb and match the base and glass shape directly, rather than relying on the model name alone across such a broad range of machines. Handle the new bulb by its base rather than the glass when installing it, and make sure the nozzle housing is unplugged first.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 32-7624-02, headlight bulb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush FBMMPWCF4, FBPHD2T; Hoover Concept, Elite, WindTunnel lines; Oreck; Royal CR50005; Titan T4000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e headlight dark while the machine still runs and cleans normally\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e match the old bulb's base and glass shape if your exact model is not listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"part-xref\"\u003eCross-reference: part number 32-7620-03\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48456550121722,"sku":"32-7624-02","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/32-7624-02.jpg?v=1785139272"},{"product_id":"spring-fuller-brush-fbp-14pw-titan-tc6000-53088b","title":"Spring - Fuller Brush FBP-14PW \/ Titan TC6000","description":"\u003cp\u003eReplacement spring, part 53.088B, for the Fuller Brush FBP-14PW and the Titan TC6000 and TC6000.2. It is the tension spring that returns its mechanism to rest after each use, and it is a small part that takes a great many cycles.\u003c\/p\u003e\u003cp\u003eSprings fail by stretching before they break. The symptom is a part that no longer snaps back — a pedal, latch or cover that feels slack, sits half-engaged, or has to be nudged into place by hand. Left alone, the loose part wears against whatever it rests on.\u003c\/p\u003e\u003cp\u003eNote how the old spring is hooked before taking it off; the new one seats the same way. Fitment covers the Fuller Brush FBP-14PWBP and the Titan TC6000 and TC6000.2.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48456810692858,"sku":"53.088B","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/53_088B.jpg?v=1785007922"},{"product_id":"upright-cord-hook-fuller-brush-fbmm-pw-53178","title":"Fuller Brush Upper Cord Hook - FBMM-PW Upright","description":"\u003cp\u003ePart 53.178 is the upper cord hook on a Fuller Brush FBMM-PW upright, the anchor point that the power cord wraps around at the top of the handle between uses.\u003c\/p\u003e\u003cp\u003eThis same hook is also cataloged for a few close relatives of the FBMM-PW: the Fuller Brush FBMMPWCF4 variant, the Titan T4000, and the Carpet Pro CPU1QD.\u003c\/p\u003e\u003cp\u003eA broken or missing hook lets the cord hang loose instead of wrapping cleanly, which turns into a tripping hazard around the storage closet and lets the cable tangle or snag the next time the machine comes out. It is a small part, but it is also one of the first things to snap off if a machine gets dragged by the cord instead of carried by the handle. The hook itself takes very little load in normal use, so a break almost always traces back to the cord being yanked rather than unwound, or to the machine being lifted or dragged by the cord itself. Training anyone who uses the machine to unwrap the cord fully before pulling it taut is the cheapest way to make a replacement hook last. A hook that has developed a hairline crack near its base but has not fully snapped is worth swapping proactively, since a plastic hook already under that kind of stress tends to fail within weeks of the first crack, not months.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e upper cord hook, part 53.178\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush FBMM-PW, FBMMPWCF4; Titan T4000; Carpet Pro CPU1QD uprights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e secures the cord's upper wrap point on the handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom if broken:\u003c\/strong\u003e cord will not stay coiled and hangs loose from the handle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitting the replacement mirrors removing the original: note how the old hook is secured to the handle, free it, and fasten the new one the same way. Confirm your model number against the list above before ordering.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48456811020538,"sku":"53.178","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/53_178.jpg?v=1785007927"},{"product_id":"upright-lense-fuller-brush-fbmmpw-54051","title":"Yellow Plastic Lens Cover - Fuller Brush FBMMPW \u0026 Carpet Pro","description":"\u003cp\u003eYellow plastic headlight lens, part 54.051, for the Fuller Brush FBMMPW and the Carpet Pro CPU1T and CPU2T. The lens covers the headlight bulb, letting light through onto the floor ahead of the nozzle while keeping dust and knocks away from the bulb itself.\u003c\/p\u003e\u003cp\u003eLenses craze, cloud and crack — they sit at the front of the machine and meet every skirting board and chair leg. A broken lens leaves the bulb exposed, and a clouded one throws so little light that the headlight stops being useful for spotting crumbs and thread under furniture.\u003c\/p\u003e\u003cp\u003eIt snaps in place of the original. Wipe the inside of the new lens before fitting it, since a fingerprint on the inner face will show up in the beam.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48456821276922,"sku":"54.051","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/54_051.jpg?v=1785007945"},{"product_id":"suction-inlet-new-style-fuller-brush-upright-54076","title":"Suction Inlet - New Style, Fuller Brush Upright","description":"\u003cp\u003eSuction inlet, new-style, for Fuller Brush uprights, part 54.076. This is the moulded port that forms part of the sealed airflow path where the hose meets the body of the machine.\u003c\/p\u003e\u003cp\u003eTwo things go wrong with it. The plastic cracks around the mounting points, which opens a leak right at the top of the airflow path, and the sealing face wears so the connection no longer sits tight. Either one bleeds off suction before it reaches the nozzle, and a loose inlet will rattle audibly while the machine runs.\u003c\/p\u003e\u003cp\u003eThe new-style inlet differs from the earlier version, so compare the shape and mounting points against the part on your machine before ordering. Check the housing's sealing face for wear at the same time — a new inlet against a worn face will still leak.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48456821407994,"sku":"54.076","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/54_076.jpg?v=1785007935"},{"product_id":"comm-seal-dust-compartment-fuller-brush-fb-phd2t-54134","title":"Fuller Brush Dust Compartment Seal - FB-PHD2T Commercial","description":"\u003cp\u003eThis gasket, part 54.134, seals the dust compartment on the Fuller Brush FB-PHD2T commercial upright, sitting where the cover presses closed against the compartment opening.\u003c\/p\u003e\u003cp\u003eCompartment seals lose their spring over time. Heat and years of latching compress the material until it holds a flat set, and at that point the cover can close and latch normally while still leaving a gap around the edge. Air takes that gap instead of the intended path, so the floor loses suction and fine dust slips past a cover that still looks fully closed. Because nothing appears wrong from the outside, this wear often gets missed until the machine is well past its best performance.\u003c\/p\u003e\u003cp\u003eBeyond the FB-PHD2T, this seal is also listed for the Fuller Brush FBHD1T, FBMMPWCF4 and FBP_14PWBP. Carpet Pro CMP3N, CMP3QD, CMP3T, CPU1QD, CPU3N, CPU3QD, CPU4N and CPU4T. Clean Max CMPSQD. Titan T4000, T4000.2, TC6000 and TC6000.2.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 54.134, dust compartment seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush FB-PHD2T, FBHD1T, FBMMPWCF4, FBP_14PWBP; Carpet Pro CMP3N, CMP3QD, CMP3T, CPU1QD, CPU3N, CPU3QD, CPU4N, CPU4T; Clean Max CMPSQD; Titan T4000, T4000.2, TC6000, TC6000.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom of a worn seal:\u003c\/strong\u003e weak floor suction with a normal-sounding motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso check:\u003c\/strong\u003e the bag or dust cup fill level, since a full compartment produces the same symptom\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48456821899514,"sku":"54.134","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/54_134.jpg?v=1785007941"},{"product_id":"tool-holder-fuller-brush-fb-hd1t-upright-54139","title":"Tool Holder - Fuller Brush FB-HD1T Upright","description":"\u003cp\u003eTool holder for the Fuller Brush FB-HD1T upright, part 54.139. It clips to the machine and docks an onboard attachment, so you can go from floor work to a crevice or dusting tool without putting the vacuum down or hunting through a cupboard.\u003c\/p\u003e\u003cp\u003eThe mounting tabs are what break. Once they go the holder rattles, then drops the tool during use — and a tool that falls off in a corridor is a tool that gets lost. On a commercial machine the attachments cost far more than the clip meant to hold them.\u003c\/p\u003e\u003cp\u003eIt presses onto the original mounting point until the tabs click home, with no tools or fasteners needed. Check that the attachment still seats snugly in the new holder before relying on it.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48456823046394,"sku":"54.139","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/54.139.jpg?v=1785007951"},{"product_id":"fuller-brush-circuit-breaker-riccar-r10e-a028-0114b","title":"Carpet Pro Circuit Breaker - Riccar R10E","description":"\u003cp\u003ePart A028-0114B is the 5 amp resettable circuit breaker used across these uprights — the Carpet Pro CP-ULW and ZM-400, the Riccar R10E, the Simplicity R10E, the Maytag M500 and the Fuller Brush FB-SM. It sits between the cord and the motor and trips when current climbs past its rating.\u003c\/p\u003e\u003cp\u003eThe pattern that points here is a machine that runs, shuts itself off part way through a room, then works again once it has sat for twenty minutes or so. A breaker that has weakened trips earlier each time until it will barely finish a rug.\u003c\/p\u003e\u003cp\u003eBefore fitting a new one, rule out what a healthy breaker is protecting you from. A jammed brush roll, a blocked airway or a failing motor will trip a good breaker too, and swapping the part without finding the cause only removes the warning.\u003c\/p\u003e\n\u003cp class=\"part-xref\"\u003eCross-reference: part number A028-0114\u003c\/p\u003e","brand":"Carpet Pro","offers":[{"title":"Default Title","offer_id":48457077522682,"sku":"A028-0114B","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/A028-0114B_e7852150-0c0c-4fa1-8027-5c5abdcfd3a8.jpg?v=1785153653"},{"product_id":"carpet-pro-fb-series-upright-light-bulb-fuller-brush-t3200-a350-0000","title":"Carpet Pro Series Upright Light Bulb Fuller Brush - T3200","description":"\u003cp\u003eThis OEM \u003cstrong\u003eheadlight bulb\u003c\/strong\u003e (Part #A350-0000) fits Carpet Pro, Fuller Brush, and several compatible uprights, lighting your cleaning path under furniture and in dim rooms. The bulb seats in the nozzle housing and runs off the machine's low-voltage circuit.\u003c\/p\u003e\u003cp\u003eBulbs burn out or dim with age, and a dark headlight makes it easy to miss dirt in shadowed areas. Replacing a spent bulb with the correct factory-spec unit restores clear, safe illumination at the right wattage for the machine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Carpet Pro CPU75, CPU75T, CPU85T; Fuller Brush FB-SM; Maytag M500, M700; Simplicity R10P, R10S, S20EZM; Riccar R10P, R10S, S20EZM; Titan T3000, T3200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e OEM upright headlight bulb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e restores a bright, even cleaning-path light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e let a burned-out bulb cool before removing it\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe bulb installs into its socket with no tools for most models. Verify your model against the list above before ordering.\u003c\/p\u003e\n\u003cp class=\"part-xref\"\u003eCross-reference: part number 09-7600-08\u003c\/p\u003e","brand":"Carpet Pro","offers":[{"title":"Default Title","offer_id":48457082175738,"sku":"A350-0000","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/A350-0000_c2cf5f22-3e11-4897-92e4-f39d6bb9b8c0.jpg?v=1785143679"},{"product_id":"fuller-brush-fb-spdm-switch-a428-2014","title":"Fuller Brush Power Switch - FB-SPDM","description":"\u003cp\u003eThis OEM \u003cstrong\u003epower switch\u003c\/strong\u003e (Part #A428-2014) fits Fuller Brush FBSPDM vacuums and compatible models, restoring reliable on\/off control at the handle. The switch carries motor power and takes a press every time the machine is used.\u003c\/p\u003e\u003cp\u003eA worn switch can keep the vacuum from starting, cause it to cut out mid-clean, or leave it running when toggled off. These are the usual signs of a switch that has reached the end of its service life. Fitting the correct replacement returns steady, positive power control.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush FBSPDM and compatible models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e OEM on\/off power switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e restores dependable starts and shutoffs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e unplug the vacuum before opening the switch housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe switch wires in as a direct replacement to factory specification. Verify your model before ordering to confirm the correct fit.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457082536186,"sku":"A428-2014","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/A428-2014_e521c80c-bdcb-42d4-bab9-ffc437ace497.jpg?v=1785154548"},{"product_id":"fuller-brush-switch-knob-position-ball-titan-t40002-a719-0000","title":"Fuller Brush Switch Knob Position Ball - Titan T4000","description":"\u003cp\u003eThis OEM \u003cstrong\u003eswitch knob position ball\u003c\/strong\u003e (Part #A719-0000) fits Fuller Brush FBMMPWCF4 and Titan T4000.2 uprights. The small detent ball sits inside the switch knob mechanism, giving each setting a positive click and holding it in place.\u003c\/p\u003e\u003cp\u003eDetent balls and their springs wear or go missing, and without one the switch knob feels loose, drifts between settings, or fails to hold a position. A vague, wandering switch makes the machine harder to control. Fitting the correct position ball restores a crisp, secure detent.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush FBMMPWCF4; Titan T4000.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e OEM switch knob detent position ball\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e restores a positive click and firm setting hold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e work over a tray so the small ball is not lost during service\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe ball seats into its detent pocket during a switch service. Verify your model before ordering to confirm the correct fit.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457082962170,"sku":"A719-0000","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/A719-0000_71f2978f-0806-458d-ae2a-0fe1a3481b1e.jpg?v=1785153629"},{"product_id":"switch-activator-spring-fuller-brush-fbhd1-commercial-a719-0100","title":"Fuller Brush Switch Activator Spring FBHD1 Commercial","description":"\u003cp\u003eThis replacement \u003cstrong\u003eswitch activator spring\u003c\/strong\u003e (Part #A719-0100) serves Fuller Brush commercial uprights including the FBHD1. The spring returns the switch actuator to position after each press, giving the on\/off control its snap and reset.\u003c\/p\u003e\u003cp\u003eSprings fatigue and eventually break, and a failed activator spring leaves the switch feeling mushy, sticking down, or failing to reset between presses. That makes reliable on\/off control difficult. Installing the correct spring restores a firm, responsive switch action.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush FBHD1, FBHD1T, FBMMPWCF4, FBPHD2, FBPHD2T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e replacement switch actuator return spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e restores crisp switch snap and reliable reset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e unplug the vacuum before opening the switch area\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe spring installs within the switch assembly during service. Confirm your model against the list above before ordering.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457083060474,"sku":"A719-0100","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/A719-0100_f5c61288-ee65-4571-96f7-ff288ca45ee3.jpg?v=1785148966"},{"product_id":"fuller-brush-e-clip-rug-floor-selector-titan-t40002-a732-2900","title":"Fuller Brush E-Clip Rug Floor Selector - Titan T4000","description":"\u003cp\u003eThis replacement \u003cstrong\u003eE-clip\u003c\/strong\u003e (Part #A732-2900) works in the rug and floor height-selector mechanism on Titan and Riccar uprights. The small clip retains a shaft or pin so the height selector stays engaged and adjusts cleanly between carpet and bare-floor settings.\u003c\/p\u003e\u003cp\u003eE-clips can pop off or corrode, and a missing one lets the selector shaft drift so the height adjustment slips or stops working. Without it the machine may sit at the wrong height for the surface. Fitting the correct E-clip restores secure, dependable height selection.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Titan T4000.2; Riccar 7300, 7350, 7850, 8900, 8925, 8955\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e replacement retaining E-clip for the height selector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e keeps the floor selector engaged and adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e use pliers and work over a tray so the clip is not lost\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe clip snaps into its groove during a selector service. Confirm your model against the list above before ordering.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457083453690,"sku":"A732-2900","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/A732-2900_87a2f77d-6257-4481-bc71-28f7c2525f37.jpg?v=1785158243"},{"product_id":"fuller-brush-lock-washer-fb-phd2t-commercial-a732-3900","title":"Fuller Brush Lock Washer - FB-PHD2T Commercial","description":"\u003cp\u003eThis OEM \u003cstrong\u003elock washer\u003c\/strong\u003e (Part #A732-3900) fits Carpet Pro and Fuller Brush commercial uprights including the FB-PHD2T. The washer sits under a fastener to keep it from backing off under the vibration of a running machine.\u003c\/p\u003e\u003cp\u003eLock washers lose their bite once flattened or corroded, and a spent one lets the bolt or nut it secures work loose over time. A loosening fastener can free a wheel, plate, or bracket and lead to bigger damage. Fitting a fresh lock washer keeps the joint tight and secure.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Carpet Pro CPU1, CPU1T; Fuller Brush FBHD1, FBHD1T, FBPHD2T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e OEM fastener lock washer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e keeps the secured joint from vibrating loose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e replace the washer whenever you remove the fastener it backs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe washer installs under its fastener during reassembly. Verify your model against the list above before ordering.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457083486458,"sku":"A732-3900","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/A732-3900.jpg?v=1785145091"},{"product_id":"carpet-pro-screw-upper-cord-hook-fuller-brush-fbhd1t-a732-8314","title":"Carpet Pro Screw - Upper Cord Hook Fuller Brush FBHD1T","description":"\u003cp\u003ePart A732-8314 is the screw that secures the upper cord hook on the Fuller Brush FBHD1T and the Carpet Pro, Riccar, Simplicity and Maytag uprights built alongside it. It is sized and threaded for that specific boss, which is why a hardware-store substitute tends to strip the plastic rather than hold in it.\u003c\/p\u003e\u003cp\u003eCord hooks get pulled on hundreds of times a week in commercial use. The screw backs out gradually, the hook begins to swing, and once it is loose the hook levers against its mount until the plastic cracks. A screw that will not stay tight has usually lost its thread and needs replacing, not another turn.\u003c\/p\u003e\u003cp\u003eIt fits the Carpet Pro CP-ULW, CPU1QD, CPU1T, CPU2T, CPU3N, CPU3QD, SCBP1.2 and ZM-400, the Fuller Brush FBPHD2 and FBPHD2T, the Maytag M1200, M500 and M700, the Riccar and Simplicity R10P and R10S, and the Titan T500 and TC6000.2.\u003c\/p\u003e\n\u003cp class=\"part-xref\"\u003eCross-reference: part number 09-6432-06, A7328314\u003c\/p\u003e","brand":"Carpet Pro","offers":[{"title":"Default Title","offer_id":48457083945210,"sku":"A732-8314","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/A732-8314_978ae2d3-84ba-443c-b263-873ca35de298.jpg?v=1785146839"},{"product_id":"fuller-brush-riccar-f-series-allergen-paper-bags-supralight-freedom-6-pack-a812","title":"EnviroCare A812 Type F HEPA Bags, 6 Pack","description":"\u003cp\u003eReplace the collection bag with EnviroCare A812 Type F HEPA Bags, 6 Pack. This is an aftermarket EnviroCare replacement. \u003c\/p\u003e\u003ch2\u003eCompatibility and fit\u003c\/h2\u003e\u003cp\u003eRiccar SupraLite and Simplicity Freedom uprights that specify Type F bags. Confirm the bag style and collar on the particular machine.\u003c\/p\u003e\u003ch2\u003ePart numbers and specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEnviroCare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart reference\u003c\/th\u003e\n\u003ctd\u003eA812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003e6 synthetic HEPA-media bags\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eBefore you order\u003c\/h2\u003e\u003cp\u003eA812 is made by EnviroCare for Type F applications. It is not an OEM Riccar or Simplicity pack, and Type F should not be confused with the newer R10\/S10 bag styles.\u003c\/p\u003e\u003cp\u003eFor help matching the part, send the machine model and filter or bag reference through \u003ca href=\"\/pages\/contact\"\u003eour contact page\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat is included with A812?\u003c\/h3\u003e\u003cp\u003e6 synthetic HEPA-media bags.\u003c\/p\u003e\u003ch3\u003eWhich application is A812 for?\u003c\/h3\u003e\u003cp\u003eRiccar SupraLite and Simplicity Freedom uprights that specify Type F bags. Confirm the bag style and collar on the particular machine.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457084010746,"sku":"A812","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0ff8b3b818025c60c9eb3b7b60b43398.png?v=1792863895"},{"product_id":"brush-insert-fuller-brush-fbp-14wbp-upright-b012-0900b","title":"9mm Brush Strip - Riccar Vibrance\/Symmetry, Carpet Pro CPU1\/CPU2 (Black \u0026 Gold)","description":"\u003cp\u003eThis 9mm black and gold brush \u003cstrong\u003estrip\u003c\/strong\u003e fits the brush rolls on Riccar Vibrance and Symmetry uprights, along with Carpet Pro CPU1 and CPU2 and the Fuller Brush FBP-14WBP. Sold individually, each strip slides into one channel of the roller. A complete roller uses four strips, so plan for a set when restoring a full brush roll.\u003c\/p\u003e\u003cp\u003eBrush strip bristles wear down, flatten, and splay with use, and once they no longer reach into the carpet the roller stops agitating dirt loose. Worn strips leave visible debris and pet hair behind even with good suction. Fresh strips restore firm bristle contact and effective carpet grooming.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Riccar Vibrance and Symmetry, Carpet Pro CPU1 and CPU2, Fuller Brush FBP-14WBP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e sold individually; four strips complete one brush roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces:\u003c\/strong\u003e B012-0900B, B0120900B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e replace all four strips at once for even agitation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEach strip presses into its channel on the roller. Confirm your model before ordering and order the count you need.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457114747130,"sku":"B012-0900B","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/B012-0900B_2b2c799b-702a-479a-8846-ef2121730b30.jpg?v=1785141867"},{"product_id":"fuller-brush-cam-inside-metal-titan-t4000-fbmm-pwcf4-b012-1414","title":"Fuller Brush Inside Metal Cam - Titan T4000","description":"\u003cp\u003eThe Fuller Brush inside metal \u003cstrong\u003ecam\u003c\/strong\u003e is an OEM replacement component for the Titan T4000 and T4000.2, the Fuller Brush FBMMPWCF4, and the Maytag M700. The cam is a shaped metal part that works inside the nozzle mechanism, and its profile guides the moving parts it contacts. Being metal, it stands up to repeated cycling better than plastic alternatives.\u003c\/p\u003e\u003cp\u003eAs a cam wears, its working edges round off or develop play, which can make the mechanism it drives feel loose, notchy, or unreliable. A worn or damaged cam is worth replacing before it affects the parts around it. A fresh cam restores precise, consistent movement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Titan T4000 and T4000.2, Fuller Brush FBMMPWCF4, Maytag M700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e inside metal cam, OEM replacement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e durable metal construction for long service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e inspect the matching outside cam while you have the housing open\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstall the cam in its original position during service. Verify your model number before ordering to confirm the correct cam.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457115304186,"sku":"B012-1414","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/B012-1414_7cfa26cd-8706-4698-ae9e-b0f65f53d66c.jpg?v=1785146316"},{"product_id":"fuller-brush-cam-outside-titan-t4000-fbmm-pwcf4-b012-1514","title":"Fuller Brush Outside Cam - Titan T4000","description":"\u003cp\u003eThis Fuller Brush outside \u003cstrong\u003ecam\u003c\/strong\u003e is an OEM replacement for the Titan T4000 and T4000.2, the Fuller Brush FBMMPWCF4, and the Maytag M700. Mounted on the outer side of the nozzle mechanism, the cam's shaped profile guides the moving components it rides against. It pairs with the inside cam to keep that mechanism working in sync.\u003c\/p\u003e\u003cp\u003eOver time a cam's contact surfaces wear, chip, or develop slack, and the mechanism it controls can start to feel loose or catch. Replacing a worn outside cam keeps the assembly moving smoothly and protects the mating parts from uneven load. A fresh cam brings back precise, repeatable action.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Titan T4000 and T4000.2, Fuller Brush FBMMPWCF4, Maytag M700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e outside cam, OEM replacement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e restores smooth, consistent mechanism movement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e replace both inside and outside cams together if both show wear\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe cam mounts in its original location during reassembly. Confirm your model number before ordering to be sure of the fit.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457115369722,"sku":"B012-1514","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/B012-1514_08edd1aa-56d0-4b49-ad0f-776931db1423.jpg?v=1785140450"},{"product_id":"clutch-pad-fuller-brush-fb-mmcf4-upright-b012-2514","title":"Clutch Pad - Fuller Brush FB-MMCF4 Upright","description":"\u003cp\u003ePart B012-2514 is the clutch pad for the Fuller Brush FB-MMCF4 upright. It is the friction surface in the clutch that couples the drive to the brush roll, and it wears a little every time the clutch takes up.\u003c\/p\u003e\u003cp\u003eA worn pad slips. What you see is a brush roll that spins freely with the nozzle in the air but slows or stops the moment you push it into carpet — the drive is there right up until it is asked to do work. Glazed pads behave the same way and sometimes add a faint burning smell after a few minutes of use.\u003c\/p\u003e\u003cp\u003eBecause the clutch has to come apart to reach the pad, it is worth inspecting the belt and the brush roll bearings in the same job. All three wear on the same clock, and none of them is worth a second teardown. Confirm your machine is the FB-MMCF4 before ordering.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457115468026,"sku":"B012-2514","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/B012-2514_fa03b06b-a0e1-4296-a8b9-882b24a0f901.jpg?v=1785148445"},{"product_id":"brush-roll-fuller-brush-fb-spdm-speedy-maid-135-inches-b012-3000","title":"Brush Roll - Fuller Brush FB-SPDM Speedy Maid - 13.5 Inches","description":"\u003cp\u003eThe Speedy Maid does its carpet work with a 13.5-inch brush roll turning under the nozzle, and this is the replacement roller for the Fuller Brush FB-SPDM, ordered as part B012-3000. It also fits the Fuller Brush 3414.\u003c\/p\u003e\u003cp\u003eBristles rarely fail all at once. They wear short, splay outward and pack solid with hair and carpet thread until the roller skates over the pile instead of digging into it. The motor still sounds strong, but a pass leaves lint and grit behind and the carpet stops looking groomed. A roller that rattles, drags at one end or squeals is telling you the same thing.\u003c\/p\u003e\u003cp\u003eA new brush roll puts firm bristle contact back on the carpet. Check the belt while the roller is out: a glazed or stretched belt will not drive even a fresh roller at full speed, and the two wear together.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457115533562,"sku":"B012-3000","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/B012-3000_e169e64d-fa30-40a7-9e16-0320f7e500ea.jpg?v=1785163545"},{"product_id":"fuller-brush-poly-v-belt-fbp-14wbp-upright-b014-1400","title":"Fuller Brush Poly V Belt - FBP-14WBP Upright","description":"\u003cp\u003eOn the Fuller Brush FBP-14WBP upright the brush roll is driven by a poly-V belt, part B014-1400. It runs flat, with lengthwise ribs that key into matching grooves on the motor pulley and the roller, so the drive is positive rather than a matter of friction alone.\u003c\/p\u003e\u003cp\u003eWhat you notice when it goes is agitation, not suction. The machine sounds normal, the hose still pulls, but carpet takes two or three passes and the roller can be stopped with light pressure from your foot. Heat and hours glaze the ribs, the belt stretches, and it begins slipping under load before it ever snaps. A burnt rubber smell after a long run is the same warning.\u003c\/p\u003e\u003cp\u003eFitting a fresh poly-V restores full brush roll speed. While the guard is off, clear the hair wrapped around the roller ends so the new belt is not fighting a bound roller.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457115959546,"sku":"B014-1400","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/B014-1400_c43b35ed-0057-4046-b8c5-0ca8c2cfab4e.jpg?v=1785138848"},{"product_id":"fuller-brush-upright-light-lens-fb-sm-lightweight-b018-0515","title":"Fuller Brush Headlight Lens - FB-SM Lightweight Upright","description":"\u003cp\u003eThe Fuller Brush FB-SM lightweight upright carries its headlight behind a clear lens at the front of the nozzle, and this is the replacement, part B018-0515. The same lens fits the Maytag M700.\u003c\/p\u003e\u003cp\u003eIt is a small part that does two jobs: it keeps dust and debris out of the bulb housing, and it directs the light down onto the floor a step ahead of you. Cracks come from the machine meeting furniture legs and door frames; the yellowing comes from the bulb itself over a few years. Either way the light goes soft and scattered, and the dark strip along the baseboards that the headlight is there to show you disappears.\u003c\/p\u003e\u003cp\u003eFit a clear lens and the beam sharpens up again. Wipe the inside face before it goes on, as a film of fine dust dims a new lens surprisingly quickly.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457116516602,"sku":"B018-0515","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/B018-0515_25a46162-f4d2-4b15-9c01-cfb3f2388bd7.jpg?v=1785150708"},{"product_id":"fuller-brush-handle-bolt-titan-t3200-simplicty-20ezm-b283-0100","title":"Fuller Brush Handle Bolt - Titan T3200 and Simplicity S20EZM","description":"\u003cp\u003ePart B283-0100 is the handle bolt used on the Titan T3200 and the Simplicity and Riccar S20EZM, and it fits the Fuller Brush FBEZM as well. It is the fastener that pulls the upper handle down into the body of the machine and holds it there.\u003c\/p\u003e\u003cp\u003eOne bolt does a lot of work. Undone or missing, the handle rocks in its socket, the machine wanders as you push it, and the plastic around the joint takes stress it was never meant to carry — which is how a loose bolt turns into a cracked housing. Owners often find the bolt lying in the bag compartment or on the floor long after the wobble started.\u003c\/p\u003e\u003cp\u003eFitting the correct bolt makes the handle solid again. Check it is seated and snug rather than forced; overtightening into plastic is the other way this joint fails.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457119826170,"sku":"B283-0100","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/B283-0100_3444fafc-3ff0-4ad8-b8b0-74c93d95d77d.jpg?v=1785147268"},{"product_id":"fuller-brush-switch-mainfuller-mighty-maid-upright-vacuum-b328-0400","title":"Fuller Brush Main Power Switch - Mighty Maid Upright","description":"\u003cp\u003eA main power switch is what closes the circuit every time you press it, running current from the wall cord through to the motor on the Fuller Brush Mighty Maid upright, model FBMM1T. B328-0400 replaces the original unit.\u003c\/p\u003e\u003cp\u003eRepeated pressing arcs the internal contacts a little each time, and over months of use that arcing pits the metal until it stops making clean contact. What shows up first is a vacuum that needs to be held or jiggled at the switch to start, one that starts only sometimes, or one that quits the instant the cord gets tugged. Owners often blame the motor or the cord first, since a machine that will not start could be either. Before assuming the worst, wiggle the switch housing itself while the unit is plugged in and watch whether the motor cuts in and out along with it. If it does, the switch itself is the likely fault, not anything further down the line.\u003c\/p\u003e\u003cp\u003eA fresh switch brings back a single, reliable press to start. Unplug the machine before opening the housing, and mark which lead lands on which terminal beforehand, since the two are not always interchangeable.\u003c\/p\u003e\u003cp\u003eIf you have a multimeter on hand, testing the old switch for continuity across its terminals while toggling it confirms the diagnosis before you spend time on the swap. An open circuit in the on position, or one that flickers as you wiggle the housing, points squarely at the switch rather than the motor or cord. The new switch seats in the original cutout without any trimming or reshaping needed, so this stays a wiring job rather than a fitting one. Once it is connected, cycle the machine a handful of times before closing the housing fully, in case a spade terminal needs reseating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e B328-0400 main power switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e FBMM1T Mighty Maid, Fuller Brush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e needs jiggling to start, starts intermittently\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore you start:\u003c\/strong\u003e unplug the machine, mark wire positions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457120874746,"sku":"B328-0400","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/B328-0400.jpg?v=1785155466"},{"product_id":"switch-activator-fuller-brush-fbhd1-commercial-b328-0530","title":"Switch Activator - Fuller Brush FBHD1 Commercial","description":"\u003cp\u003eThis compatible replacement \u003cstrong\u003eswitch activator\u003c\/strong\u003e restores on-off control to the Fuller Brush FBHD1, FBHD1T, FBMMPWCF4, FBPHD2, and FBPHD2T commercial uprights and the Titan T4000. The activator is the mechanical link that trips the power switch when you press the control.\u003c\/p\u003e\u003cp\u003eYears of repeated pressing wear the activator until the switch no longer clicks cleanly or holds its position. That shows up as a vacuum that is hard to start or shuts off unexpectedly. A new activator returns crisp, dependable switching.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush FBHD1, FBHD1T, FBMMPWCF4, FBPHD2, FBPHD2T; Titan T4000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Actuates the main power switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e Consistent, reliable on-off operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Unplug the vacuum before servicing the switch area\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eReplacing this small part is a straightforward repair that restores dependable control. Check your model number against the list above before ordering.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457120907514,"sku":"B328-0530","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/B328-0530_a43e56d3-df75-4fa2-b93a-86df9da63f25.jpg?v=1785146992"},{"product_id":"carpet-pro-spring-upper-cord-hook-fuller-brush-fb-hd-series-b430-0200","title":"Carpet Pro Spring - Upper Cord Hook, Fuller Brush Hd Series","description":"\u003cp\u003eThe upper cord hook on a Fuller Brush HD series upright swings to release the cord, and a spring is what returns it and holds it closed. Part B430-0200 is that spring. Besides the FBHD1, FBHD1T, FBPHD2 and FBPHD2T, it is listed for the Fuller Brush FB-SM, the Carpet Pro CP-ULW and ZM-400, the Maytag M500, M700 and M1200, and the Riccar and Simplicity R10P and R10S.\u003c\/p\u003e\u003cp\u003eWhen the spring tires or snaps, the hook flops loose. The cord will not stay wrapped, it unwinds itself in the closet and pays out under the wheels while you work, which is how cords get run over and jackets get split.\u003c\/p\u003e\u003cp\u003eIt is a few cents of steel doing a real job, and a new one restores the positive snap the hook had when the machine was new.\u003c\/p\u003e\n\u003cp class=\"part-xref\"\u003eCross-reference: part number 09-6413-09\u003c\/p\u003e","brand":"Carpet Pro","offers":[{"title":"Default Title","offer_id":48457122676986,"sku":"B430-0200","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/B430-0200_426ae5a1-5743-476b-ab22-82a92d16c5cb.jpg?v=1785145304"},{"product_id":"fuller-brush-upper-cord-hook-fb-phd2t-commercial-b430-0314","title":"Fuller Brush Upper Cord Hook - FB-PHD2T Commercial","description":"\u003cp\u003eMounted high on the handle, the upper cord hook holds the top wrap of the power cord. This is the replacement hook for the Fuller Brush commercial uprights, part B430-0314, fitting the FBHD1, FBHD1T and FBPHD2T.\u003c\/p\u003e\u003cp\u003eHooks break at the root, usually when someone pulls the cord off sideways instead of unwinding it. Once the upper hook is gone there is nothing to wrap against, so the cord slides off the lower hook as well and ends up trailing on the floor, which is a nuisance in a closet and a trip hazard in a corridor.\u003c\/p\u003e\u003cp\u003eThe hook mounts to the handle in place of the old one. If the lower hook on the same machine has been taking the extra strain, it is worth checking that while you have the machine in front of you.\u003c\/p\u003e\n\u003cp class=\"part-xref\"\u003eCross-reference: part number 09-6419-03\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457122709754,"sku":"B430-0314","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/B430-0314.jpg?v=1785141339"},{"product_id":"fuller-brush-upper-metal-handle-cord-hook-carpet-pro-cpu-series-b430-0331","title":"Fuller Brush Upper Cord Hook - Carpet Pro CPU Series","description":"\u003cp\u003ePart B430-0331 is the upper cord hook for the metal-handle Carpet Pro CPU-series uprights, confirmed for the Fuller Brush FBPHD2. The wrapped power cord catches over this hook near the top of the handle, which is what keeps the lead off the floor between jobs instead of trailing loose behind the machine.\u003c\/p\u003e\u003cp\u003eOnce the hook breaks off, the coiled cord slips free by itself and ends up tangled in storage or lying underfoot where someone can trip on it. Swapping this one small part puts the cord wrap back the way it should be without touching anything else on the handle.\u003c\/p\u003e\u003cp\u003eTake a photo of the old hook in place before it comes off, and keep whatever hardware comes away with it. A cord hook lives in a spot that takes a hard yank every time somebody pulls the lead free in a hurry, so it is worth looking over the mounting point for cracks at the same time rather than fitting a new hook onto a damaged one.\u003c\/p\u003e\u003cp\u003eThis is the hook for the metal-handle CPU-series machines, and the FBPHD2 is the model it is confirmed against. Compare your own handle with that before you order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e B430-0331, upper cord hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirmed fit:\u003c\/strong\u003e Fuller Brush FBPHD2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e holds the upper loop of the power cord\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e keep the original mounting hardware when the old hook comes off\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457122775290,"sku":"B430-0331","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/B430-0331_fc7619f8-a4c4-433e-960e-f49a7a62b4d3.jpg?v=1785154118"},{"product_id":"fuller-brush-clutch-rod-titan-t4000-upright-b719-0400","title":"Fuller Brush Clutch Rod - Titan T4000 Upright","description":"\u003cp\u003eThis OEM \u003cstrong\u003eclutch rod\u003c\/strong\u003e links the handle-release action to the brush-roll clutch on the Fuller Brush FBMMPWCF4 and the Titan T4000 and T4000.2 uprights. The rod transfers your input to engage or disengage the drive that spins the brush roll.\u003c\/p\u003e\u003cp\u003eWhen the clutch rod bends, wears at its ends, or disconnects, the brush roll may fail to engage or the clutch slips, and carpet pickup suffers. The rod is central to the drive linkage. A sound rod restores crisp, reliable brush-roll engagement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush FBMMPWCF4; Titan T4000, T4000.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Actuates the brush-roll clutch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e Reliable brush engagement on carpet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Inspect the belt and clutch pad while the base is open\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe rod installs into the clutch linkage as a direct replacement with no special tools required. Confirm your model number before ordering so the linkage matches.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457123823866,"sku":"B719-0400","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/B719-0400_d5d53101-31de-46c3-bc83-a60227b24b12.jpg?v=1785147652"},{"product_id":"fuller-brush-rubber-pad-clutch-titan-t4000-fbmm-pwcf4-c012-0400","title":"Fuller Brush Clutch Rubber Pad - Titan T4000","description":"\u003cp\u003eThis genuine \u003cstrong\u003eclutch rubber pad\u003c\/strong\u003e provides the friction surface for the brush-roll clutch on the Fuller Brush FBMM-PWCF4, Titan T4000 and T4000.2, Simplicity 7300, 7350, and 7850, and Riccar 8750, 8925, and 8955 uprights. The pad grips within the clutch to transfer drive to the brush roll.\u003c\/p\u003e\u003cp\u003eAs the rubber pad wears smooth or hardens, the clutch begins to slip, so the brush roll turns weakly or inconsistently and carpet pickup drops. The pad is a wear item at the heart of the drive. A fresh pad restores firm, positive clutch engagement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush FBMM-PWCF4; Titan T4000, T4000.2; Simplicity 7300, 7350, 7850; Riccar 8750, 8925, 8955\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Friction pad for the brush-roll clutch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e Stops clutch slip for full brush drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Inspect the belt and pulley while the clutch is apart\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFit the pad to original specification so the clutch grips correctly. Verify your model number before ordering to confirm the fit.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457126052090,"sku":"C012-0400","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/C012-0400.jpg?v=1785143265"},{"product_id":"fuller-brush-clutch-pulley-titan-t4000-t40002-upright-c012-0700","title":"Fuller Brush Clutch Pulley - Titan T4000 Upright","description":"\u003cp\u003eThis genuine \u003cstrong\u003eclutch pulley\u003c\/strong\u003e is part of the brush-roll drive on the Titan T4000 and T4000.2, Simplicity 7300, 7350, 7850 and Symmetry Series, and Riccar 8900, 8925, 8955, 8000 Series, and Vibrance Series uprights, plus the Fuller Brush FBMMPWCF4. The pulley transfers belt drive into the clutch that spins the brush roll.\u003c\/p\u003e\u003cp\u003eA worn clutch pulley causes inconsistent brush-roll engagement, so agitation comes and goes and carpet cleaning suffers. Groove wear and play at the bearing surface are the usual culprits. A fresh pulley restores steady, reliable drive to the brush roll.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Titan T4000, T4000.2; Simplicity 7300, 7350, 7850, Symmetry Series; Riccar 8900, 8925, 8955, 8000 Series, Vibrance Series; Fuller Brush FBMMPWCF4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Transfers belt drive to the clutch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e Consistent brush-roll engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Replace the belt at the same time for best results\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe pulley installs to original specification across these models. Confirm your model number before ordering so the fit is correct.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457126117626,"sku":"C012-0700","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/C012-0700_e96b25eb-852d-40c2-b674-64ae7f555e27.jpg?v=1785139420"},{"product_id":"carpet-pro-fan-seal-fuller-brush-fb-sm-upright-c121-0000","title":"Carpet Pro Fan Seal - Fuller Brush Spiffy Maid Upright","description":"\u003cp\u003eThis OEM \u003cstrong\u003efan seal\u003c\/strong\u003e seals the fan chamber on the Carpet Pro CP-ULW and ZM-400 and the Fuller Brush FB-SM lightweight uprights. The seal sits between the fan housing and the motor path to keep the suction airflow contained and directed.\u003c\/p\u003e\u003cp\u003eA hardened, torn, or missing fan seal lets air leak around the fan chamber, and that leak drops suction at the cleaning head. Heat and age gradually degrade the seal material. A fresh seal restores the airtight path the fan needs to move air efficiently.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Carpet Pro CP-ULW, ZM-400; Fuller Brush FB-SM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Seals the fan chamber against air leaks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e Restores full suction at the head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Inspect the fan for chips while the chamber is open\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSeat the seal cleanly so the fan housing closes airtight. Confirm your model number before ordering so the seal matches your machine.\u003c\/p\u003e\n\u003cp class=\"part-xref\"\u003eCross-reference: part number A121-0100E\u003c\/p\u003e","brand":"Carpet Pro","offers":[{"title":"Default Title","offer_id":48457126543610,"sku":"C121-0000","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/C121-0000_3baf1d5e-590c-48fe-94e2-c54b1a6d3fe9.jpg?v=1785151936"},{"product_id":"fuller-brush-jiffy-maid-dirt-cup-cover-latch-with-spring-c283-0003","title":"Fuller Brush Jiffy Maid Dirt Cup Cover Latch with Spring","description":"\u003cp\u003eThis OEM dirt cup cover \u003cstrong\u003elatch\u003c\/strong\u003e with spring secures the dust cup cover on the Fuller Brush FB-JFM Jiffy Maid and matching Simplicity and Riccar S20PET bagless uprights. The latch holds the cover closed so the dust cup stays sealed during operation.\u003c\/p\u003e\u003cp\u003eA broken latch or weak spring lets the cover open or sit loose, breaking the seal that keeps dust contained and airflow correct. Debris can then escape and suction drops. A fresh latch and spring restore a secure, sealed closure on the dust cup.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush FB-JFM; Simplicity S20PET; Riccar S20PET\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Latches and seals the dirt cup cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e Keeps dust contained and suction strong\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Check the cover seal while the latch is off\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe latch installs with its spring as a direct-fit replacement. Confirm your model number before ordering so the latch matches your machine.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457126838522,"sku":"C283-0003","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/C283-0003_bfe6a323-f56d-4f99-8120-236d4876faf5.jpg?v=1785147600"},{"product_id":"fuller-brush-brush-roll-clean-max-nitro-commercial-fits-fb-ezm-c283-3100","title":"Fuller Brush Brush Roll - Clean Max Nitro Commercial","description":"\u003cp\u003ePart C283-3100 is the brush roll for the Clean Max Nitro commercial upright and the Fuller Brush FBEZM, and it also fits the Riccar and Simplicity S20EZM.\u003c\/p\u003e\u003cp\u003eWorn agitation is the most common reason an upright stops cleaning carpet properly. The bristles are what rake the pile open so airflow can lift what is trapped at the base of the fibers, and once they have worn short the machine skates over grit instead of loosening it. Carpets start looking dull and flattened even straight after vacuuming. Bearings are the other failure, and a roller that has begun to bind will throw belts and scorch them.\u003c\/p\u003e\u003cp\u003eA fresh brush roll is the single change that makes the most visible difference to pickup on high-traffic carpet. Check the belt at the same time, since a tired belt on a new roller will not hold speed for long.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457127854330,"sku":"C283-3100","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/C283-3100_53b1ebbc-a6bc-4997-b83f-fb438cb8a8fd.jpg?v=1785145682"},{"product_id":"fuller-brush-rear-wheel-home-maid-canister-c288-0008","title":"Fuller Brush Rear Wheel - Home Maid Canister","description":"\u003cp\u003ePart C288-0008 is the rear wheel for the Fuller Brush Home Maid canister, fitting the FB-HMP and FBHM. It is one of the wheels at the back of the body that carry the machine's weight as you tow it behind you.\u003c\/p\u003e\u003cp\u003eA canister wheel that has worn flat or seized on its axle changes how the whole machine behaves. It drags at one corner, tips when the hose is pulled at an angle, and judders across hard floors. A wheel that has stopped turning altogether will start marking tile and wood.\u003c\/p\u003e\u003cp\u003eHair and thread wound around the axle is what usually kills them, so clear the axle when you fit the new wheel and look at the other side while you are down there. The replacement goes straight on in place of the original.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457128280314,"sku":"C288-0008","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/C288-0008_62dd782e-f8dc-4744-99b6-e80b7221a246.jpg?v=1785142918"},{"product_id":"fuller-brush-canister-secondary-hepa-filter-fits-fb-gim-fbp-pcv-c345-5000","title":"Fuller Brush C345-5000 Secondary Filter","description":"\u003cp\u003eC345-5000 is a replacement secondary filter for select Fuller Brush canister vacuums. One secondary filter supplied.\u003c\/p\u003e\u003ch2\u003eCompatibility and fit\u003c\/h2\u003e\u003cp\u003eFor Fuller Brush FB-GIM and FBP-PCV canister vacuums.\u003c\/p\u003e\u003ch2\u003ePart numbers and specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand \/ supply\u003c\/th\u003e\n\u003ctd\u003eFuller Brush compatible replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart reference\u003c\/th\u003e\n\u003ctd\u003eC345-5000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003eOne secondary filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eBefore you order\u003c\/h2\u003e\u003cp\u003eMatch C345-5000 and the full FB-GIM or FBP-PCV model; compare the filter housing before ordering.\u003c\/p\u003e\u003cp\u003eFor help matching the item, send the model and part reference through \u003ca href=\"\/pages\/contact\"\u003eour contact page\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat is included with C345-5000?\u003c\/h3\u003e\u003cp\u003eOne secondary filter.\u003c\/p\u003e\u003ch3\u003eWhat application is C345-5000 intended for?\u003c\/h3\u003e\u003cp\u003eFor Fuller Brush FB-GIM and FBP-PCV canister vacuums.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457128640762,"sku":"C345-5000","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-2334-04.png?v=1792882573"},{"product_id":"fuller-brush-rear-fb-sm-wheel-axle-d010-2631","title":"Fuller Brush Rear Wheel and Axle - FB-SM Upright","description":"\u003cp\u003eThe \u003cstrong\u003eFuller Brush Rear Wheel and Axle\u003c\/strong\u003e is an OEM part for the FB-SM upright that also fits Simplicity R10P and R10S and Riccar R10P and R10S. The wheel and its axle carry the back of the machine and let it roll smoothly across carpet, tile, and hardwood.\u003c\/p\u003e\u003cp\u003eRear wheels take constant abuse over floor transitions and cords, and a worn or broken wheel makes the vacuum drag, feel noisy, and even scratch hard floors. Replacing the wheel and axle restores effortless movement and protects your flooring from damage caused by a failed wheel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush FB-SM; Simplicity R10P, R10S; Riccar R10P, R10S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e OEM rear wheel and axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e smooth, quiet rolling that protects floors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e replace worn wheels in pairs for even tracking\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFit the axle into the chassis and confirm the wheel spins freely before setting the machine down. Verify your model number on the data plate before ordering so the wheel matches your upright.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457149120762,"sku":"D010-2631","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/D010-2631_fb5dd916-983c-4d6f-ab48-c2b0b99baa91.jpg?v=1785153533"},{"product_id":"brush-roll-fuller-brush-with-poly-v-pulley-cmps-qdz2-14-inches-d012-1700","title":"Fuller Brush Brush Roll-fuller Brush with Poly V Pulley - CMPS-QDZ2 - 14 Inches","description":"\u003cp\u003eThis 14-inch replacement \u003cstrong\u003eBrush Roll\u003c\/strong\u003e with a poly-V pulley (CMPS-QDZ2) restores aggressive carpet agitation across a broad range of machines. It fits Fuller Brush FBP-14PWBP, Carpet Pro CPU85, CPU85T, CPU75, and CPU75T, Riccar VIBCBP.1, Simplicity SYMCBP.1, and CleanMax CMPS-QDZ.\u003c\/p\u003e\u003cp\u003eWhen bristles flatten, wear, or wrap with hair and thread, the roller stops making firm contact with carpet and pickup drops. A worn brush leaves fibers matted after a pass. The poly-V pulley keeps brush speed consistent under belt drive, so a fresh roll returns steady, reliable carpet cleaning. The belt is not included.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush FBP-14PWBP; Carpet Pro CPU85, CPU85T, CPU75, CPU75T; Riccar VIBCBP.1; Simplicity SYMCBP.1; CleanMax CMPS-QDZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 14-inch brush roll, poly-V pulley (belt not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e consistent brush speed and firm carpet agitation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e reuse or replace the drive belt as needed during install\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFit the roller into the cleaning head, route the belt onto the pulley, and confirm free rotation before use.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457149415674,"sku":"D012-1700","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/D012-1700_5fe10fb2-c467-49b7-80ac-1ddfa7788402.jpg?v=1785146216"},{"product_id":"fuller-brush-motor-assembly-fbp-14pwbp-upright-d123-5200","title":"Fuller Brush Motor Assembly - FBP-14PWBP Upright","description":"\u003cp\u003eReturn full power to the machine with this OEM \u003cstrong\u003eMotor Assembly\u003c\/strong\u003e for the Fuller Brush FBP-14PWBP upright. Built to match factory power and airflow specifications, it drops in as the complete drive behind the vacuum's suction.\u003c\/p\u003e\u003cp\u003eA motor that smells hot, grinds, whines, or cuts out under load is usually past saving, and no filter or belt change will bring the suction back. Worn bearings and brushes are the common culprits. A factory-specification replacement motor restores the airflow and pickup the vacuum had when new.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush FBP-14PWBP upright\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e OEM replacement motor assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e restores factory power and airflow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e professional installation is recommended given the electrical connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBecause the swap involves wiring, match the original connections carefully or have a technician handle it. Confirm your model before ordering so the motor fits your upright.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457150169338,"sku":"D123-5200","price":120.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/D123-5200_54daf5b4-996f-407a-9899-16a45804824b.jpg?v=1785139266"},{"product_id":"fuller-brush-hall-sensor-idler-assembly-fbp-14pwbp-d375-1400","title":"Fuller Brush Hall Sensor Idler Assembly - FBP-14PWBP","description":"\u003cp\u003eThis is the Hall sensor idler assembly, part D375-1400, from the Fuller Brush FBP-14PWBP. It also fits the Maytag M700 and the Riccar and Simplicity R10P and R10S. The unit carries the belt idler and the Hall-effect sensor together, so the part that tensions the belt is also the part that reports whether the brush roll is turning.\u003c\/p\u003e\u003cp\u003eThat pairing is why one failure looks like two. A worn idler lets the belt slip and the brush roll slow down, the sensor reports what it sees, and the machine flags a brush roll fault or shuts the drive down, so the warning light and the loss of agitation arrive at the same moment.\u003c\/p\u003e\u003cp\u003eNote how the sensor lead is routed before taking the old unit out, and reconnect it exactly the same way.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457152135418,"sku":"D375-1400","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/D375-1400_56deca2d-d673-4e84-b324-4c94d4e9265f.jpg?v=1785150217"},{"product_id":"carpet-pro-handle-lower-with-upper-fan-hsy-fuller-brush-fb-sm-d431-3014","title":"Carpet Pro Handle - Lower with Upper Fan Housing Fuller Brush Spiffy Maid","description":"\u003cp\u003ePart D431-3014 is the lower handle for the Fuller Brush Spiffy Maid FB-SM, moulded together with the upper fan housing, so the structural piece you push against and part of the airway arrive as one component. It also fits the Carpet Pro CP-ULW and ZM-400 and the Riccar and Simplicity R10E.\u003c\/p\u003e\u003cp\u003eThat combination is why a crack here costs you twice. Structurally the handle goes loose and the machine wanders instead of tracking where you push it. On the air side, a split in the housing lets air leak in behind the nozzle, and suction at the carpet drops off even though the motor sounds exactly as it always has.\u003c\/p\u003e\u003cp\u003eReplacing the piece puts both right at once. Transfer the cord routing and any switch hardware from the old handle as you go.\u003c\/p\u003e\n\u003cp class=\"part-xref\"\u003eCross-reference: part number D431-0200\u003c\/p\u003e","brand":"Carpet Pro","offers":[{"title":"Default Title","offer_id":48457152233722,"sku":"D431-3014","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/D431-3014_50d5a5b7-edc0-4e39-9f4e-ab32e4f8d944.jpg?v=1785150229"},{"product_id":"fuller-brush-cord-fb-sm-speedy-maid-d434-3143","title":"Fuller Brush Power Cord - FB-SM Speedy Maid Upright","description":"\u003cp\u003eThis is the replacement power cord for Fuller Brush's Speedy Maid upright, model FB-SM, part D434-3143, listed specifically for this machine.\u003c\/p\u003e\u003cp\u003eA vacuum cord takes abuse in the same few places on nearly every model: where the plug gets pulled from the wall by yanking the cord instead of the plug itself, and where the cord enters the machine body and flexes each time it gets wrapped for storage. Nicked insulation, a flattened section, or a machine that loses power when the cord is jostled all point to the cord itself rather than something deeper inside the machine. A cord in that condition is a safety concern as much as a performance one, since compromised wiring should never stay in service.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e D434-3143 power cord\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush Speedy Maid, model FB-SM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Supplies power from the wall outlet to the machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTell:\u003c\/strong\u003e Nicked insulation, a flattened section, or power that cuts out when the cord is moved\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDisconnect the machine fully before starting the swap, and route the new cord through the same strain relief point the original used, leaving a little slack at the machine end so day-to-day flexing happens along the cord's length rather than right at the entry. Check the model tag first if you are not certain your unit is the FB-SM.\u003c\/p\u003e\u003cp\u003eParts availability for Fuller Brush can run more limited than for higher-volume brands, so confirming the model tag matches FB-SM exactly before ordering is worth the extra minute, and it beats waiting out a return shipment when a close-but-wrong cord arrives and will not fit.\u003c\/p\u003e\n\u003cp class=\"part-xref\"\u003eCross-reference: part number 09-5825-03\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457152332026,"sku":"D434-3143","price":77.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/D434-3143_f156212f-41df-4dff-a397-ff03fd3c0ed1.jpg?v=1785163549"},{"product_id":"fuller-brush-fb-sm-cord-2-speed-models-d434-3643","title":"Fuller Brush Power Cord - FB-SM Speedy Maid 2-Speed","description":"\u003cp\u003eThe FB-SM Speedy Maid two-speed upright and the Riccar RSL4 Supralite were built on shared tooling, down to the power cord wired into each one. D434-3643 is the cord for both machines, terminating at the same internal connections regardless of which nameplate is on the housing.\u003c\/p\u003e\u003cp\u003eCords fail at the two points that see constant flexing: right where they exit the machine base, and anywhere they get pinched under a wheel or wrapped tight around a cord hook. A cut cord that still runs is not safe to keep using, and a machine that cuts out only when the cord is bent near the housing is telling you the conductors are close to separating inside the jacket.\u003c\/p\u003e\u003cp\u003eInspect the full length before you condemn the cord, not just the section near the plug. Cracked outer jacket anywhere along the run, a warm spot when the machine has been running, or a section that feels stiffer than the rest are all signs the insulation has already broken down internally even if nothing is visibly exposed yet.\u003c\/p\u003e\u003cp\u003eFitting the new cord means opening the housing to disconnect the old leads and land the new ones on the same terminals, so this is not a job to start without a screwdriver and a little patience, or without unplugging the machine first. Note which lead lands on which terminal before you disconnect the old cord, since the two are not always symmetrical. Once the new cord is in and the housing is closed back up, run the machine through both speed settings before putting it back into service, since a two-speed switch that was disturbed during the repair is worth confirming works correctly on both settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e D434-3643 power cord\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Fuller Brush FB-SM Speedy Maid (2-Speed), Riccar RSL4 Supralite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e cutting out when flexed, split or exposed jacket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e terminal-level job, unplug before opening the housing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457152463098,"sku":"D434-3643","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/D434-3643_97899d24-fbcf-4beb-a135-def525c7797b.jpg?v=1785156225"},{"product_id":"fuller-brush-geared-belt-fb-hmp-canister-2-pack-fbhmp-b2","title":"Fuller Brush Geared Belt - Home Maid Canister - 2 Pack","description":"\u003cp\u003eTwo geared belts for the Fuller Brush Home Maid canister's power nozzle, part FBHMP-B2, for the FB-HMP.\u003c\/p\u003e\u003cp\u003eA geared belt is not a stretchy rubber loop. Its teeth mesh with the drive gear, so the brush roll turns at the speed the nozzle was designed around instead of slipping under load, and that is why the right belt matters here. When the teeth strip or the belt cracks, the brush roll slows or stops while the nozzle motor keeps running, and you get a vacuum that sounds completely normal and leaves the carpet looking untouched.\u003c\/p\u003e\u003cp\u003eWith the belt off, spin the brush roll by hand and listen to the bearings, since a belt that has been shredding is often a symptom of something binding. Two belts in the pack means the next change is already in the drawer.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457170026746,"sku":"FBHMP-B2","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/FBHMP-B2_796849a2-e006-41df-b094-f78bd771606f.jpg?v=1785150579"},{"product_id":"fuller-brush-lense-carpet-pro-cpu-1t-commercial-t4000-n19-cl","title":"Carpet Pro Headlight Lens - CPU-1T, CPU-2T Commercial Upright","description":"\u003cp\u003eN19-CL is the headlight lens fitted to Carpet Pro's CPU-1T and CPU-2T commercial uprights, the clear cover that sits in front of the headlight bulb and focuses its beam down where the nozzle is about to pass. On a commercial route that means dirt tracked under furniture, grit embedded in dim stairwells, and the edges of a room that overhead lighting rarely reaches well.\u003c\/p\u003e\u003cp\u003eThe lens takes the impacts the rest of the machine absorbs when it is pushed into a wall base or a table leg, and over years of service it also yellows from heat and UV exposure even without a direct hit. A cracked lens lets dust reach the bulb housing and shortens bulb life, and a yellowed one scatters the beam instead of focusing it, so the headlight is on but not doing its job.\u003c\/p\u003e\u003cp\u003eThe lens snaps into the housing without tools, and swapping it takes only a couple of minutes with the headlight assembly already accessible on these machines. It is also listed for the Carpet Pro CPU1QD, CPU3N and CPU3QD, the Fuller Brush FBMMPWCF4 and FBPHD2T, and the Titan T4000 and T4000.2, though that CPU1QD\/CPU3N family is a related but separate line from the CPU-1T\/CPU-2T named on this listing, so confirm the lens shape against your headlight housing before ordering if your machine is one of those cross-listed models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e N19-CL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Carpet Pro CPU-1T, CPU-2T (also listed for CPU1QD, CPU3N, CPU3QD); Fuller Brush FBMMPWCF4, FBPHD2T; Titan T4000, T4000.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e headlight lens\/cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e cracked, yellowed, or scattering the beam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"part-xref\"\u003eCross-reference: part number 09-7709-00\u003c\/p\u003e","brand":"Carpet Pro","offers":[{"title":"Default Title","offer_id":48457216917754,"sku":"N19-CL","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/N19-CL_9cbad937-1f07-46b7-926d-17d96ed0c031.jpg?v=1785143384"},{"product_id":"fuller-brush-hepa-filter-titan-t3000-upright-t3-hepa","title":"Titan T3-HEPA Filter for T3000 Upright","description":"\u003cp\u003eReplace the filter with Titan T3-HEPA Filter for T3000 Upright. \u003c\/p\u003e\u003ch2\u003eCompatibility and fit\u003c\/h2\u003e\u003cp\u003eTitan T3000 upright.\u003c\/p\u003e\u003ch2\u003ePart numbers and specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTitan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart reference\u003c\/th\u003e\n\u003ctd\u003eT3-HEPA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003eT3-HEPA filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eBefore you order\u003c\/h2\u003e\u003cp\u003eT3-HEPA and T4-HEPA are different references. Use the T3000 label and the existing cartridge shape to select this filter.\u003c\/p\u003e\u003cp\u003eFor help matching the part, send the machine model and filter or bag reference through \u003ca href=\"\/pages\/contact\"\u003eour contact page\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat is included with T3-HEPA?\u003c\/h3\u003e\u003cp\u003eT3-HEPA filter.\u003c\/p\u003e\u003ch3\u003eWhich application is T3-HEPA for?\u003c\/h3\u003e\u003cp\u003eTitan T3000 upright.\u003c\/p\u003e","brand":"Fuller Brush","offers":[{"title":"Default Title","offer_id":48457255747834,"sku":"T3-HEPA","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/17-2324-06.png?v=1792863870"}],"url":"https:\/\/evacuumsandmore.com\/collections\/fuller-brush-parts.oembed?page=3","provider":"Vacuums and More","version":"1.0","type":"link"}