{"title":"Hide A Hose","description":null,"products":[{"product_id":"battery-charger-with-cable-hide-a-hose-batterycx1000","title":"Battery Charger with Cable - Hide A Hose","description":"\u003cp\u003eThis replacement \u003cstrong\u003ebattery charger\u003c\/strong\u003e with cable supplies the charging power for the Hide-A-Hose central vacuum system battery. It plugs in to keep the battery topped up so the system operates wirelessly when you need it.\u003c\/p\u003e\u003cp\u003eA charger that has failed, or a cable with a break in it, leaves the battery unable to hold its charge, and the system loses its cordless function. Chargers and their cables wear at the plug and strain points over time. A correct replacement restores steady, safe charging.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide-A-Hose central vacuum battery system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Recharges the system battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e Restores reliable wireless operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Inspect the cable for damage before each use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAlways use the correct charger to avoid damaging the battery. Replace the unit if the battery no longer charges or the cable shows visible wear.\u003c\/p\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457123987706,"sku":"BATTERYCX1000","price":113.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/BATTERYCX1000.jpg?v=1785151995"},{"product_id":"end-cap-hide-a-hose-central-systems-hs202132","title":"Hide A Hose End Cap - Black, Older Style Hoses","description":"\u003cp\u003eBlack end cap HS202132 pushes into the open end of a Hide A Hose retractable hose, where it holds the hose sock in place and keeps the hose end round so it feeds cleanly back through the wall tubing. The cap is molded PVC and measures 1-3\/8 inches across.\u003c\/p\u003e\u003cp\u003eColor is not cosmetic on this part. Hide A Hose builds the black cap for its older style hoses and a white cap, part HS202203, for the Rapid Flex hose, and the two are not interchangeable even though they share a diameter. Order by the hose you actually own rather than by what matches your valve trim.\u003c\/p\u003e\u003cp\u003eA cap that has cracked, gone missing, or worked loose lets the hose end flatten. The sock can then creep back from the end, and the flattened rim starts catching at the valve opening instead of sliding through, which is what a homeowner usually notices well before any change in suction shows up at the tool.\u003c\/p\u003e\u003cp\u003eFitting a new one takes seconds. Seat it fully into the hose end with the sock tucked under it so nothing stands proud of the hose wall, then run one full retraction to confirm the hose travels without hesitation before putting it back into regular use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS202132\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e black, for Hide A Hose older style hoses only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-3\/8 inch diameter, PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e holds the hose sock and keeps the hose end round for retraction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for:\u003c\/strong\u003e the Rapid Flex hose, which takes the white HS202203 cap\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457180053754,"sku":"HS202132","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS202132_5e0a4767-f9cf-44c3-91cc-7dc4c36763af.jpg?v=1785150619"},{"product_id":"elbow-90-degree-sweep-long-hide-a-hose-hs202140","title":"Hide A Hose 90 Degree Long Sweep Elbow, 2 In Pipe","description":"\u003cp\u003eA retractable Hide-A-Hose system draws the whole hose back through its pipe run every time it retracts, so every fitting along that path has to let a hose travel through it, not merely let air pass. This long-sweep 90 degree elbow, part HS202140, is built to that standard and is sized to 2 inch central vacuum pipe.\u003c\/p\u003e\u003cp\u003eThe long sweep is the whole design idea. A short, abrupt 90 degree fitting snags a hose on the way back in and restricts airflow at the same time, whereas a gradual curve of this pattern lets both hose and air pass through the turn with far less argument. The same advantage carries over to a standard central vacuum system with no retractable hose, where a sharp elbow would otherwise sit in the line as a permanent airflow penalty.\u003c\/p\u003e\u003cp\u003eWhen cementing it in place, apply adhesive to the pipe exterior rather than inside the fitting socket. Excess cement forced into that joint leaves a raised ridge on the interior, and that ridge becomes the exact spot where a hose catches or a clog starts to form. Support both sides of the joint while the cement sets rather than letting the fitting hang under its own weight, since a sweep this shape can droop out of true before the bond fully cures. Allow for its footprint when laying out the run as well, because a long sweep needs considerably more room than a standard elbow.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS202140\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 90 degrees, long sweep pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide-A-Hose systems and any central vacuum installation using 2 inch pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall note:\u003c\/strong\u003e apply cement to the pipe exterior, never inside the fitting socket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457180119290,"sku":"HS202140","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS202140.jpg?v=1785154561"},{"product_id":"elbow-45-degree-long-hide-a-hose-hs202141","title":"Hide A Hose 45 Degree Long Sweep Elbow, 2 In Pipe","description":"\u003cp\u003ePart HS202141 is a wide-radius 45 degree sweep fitting sized to 2 inch central vacuum pipe. Installed in a Hide-A-Hose system, this elbow gives a retractable hose a gentler path through a direction change than a sharp corner would allow, so nothing snags partway through the wall run.\u003c\/p\u003e\u003cp\u003eAirflow drops off at any bend, and it drops sharply at a tight one. That is why installers reach for the long sweep pattern wherever the framing leaves room for it, and why a pair of 45s often stands in for a single abrupt right-angle turn: each fitting asks less of the air stream, and less of the hose travelling through it. Since the socket matches standard pipe dimensions, this elbow also drops into any central vacuum job running 2 inch line, well beyond Hide-A-Hose installations alone.\u003c\/p\u003e\u003cp\u003eApply cement to the pipe's outer surface only. Any adhesive that squeezes up into the fitting's interior sets into a raised lip, and that lip is exactly where a hose snags on the way back in and where debris builds up on every pass after that. Dry-fit the elbow against its pipe run first, since fixing a misaligned joint after the cement cures is far harder than getting it square from the start. Marking the alignment on both pieces while they are still dry lets the fitting go home in one motion once cement is on.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS202141\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 45 degrees, long sweep pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide-A-Hose systems and any central vacuum installation using 2 inch pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall note:\u003c\/strong\u003e apply cement to the pipe exterior, never inside the fitting socket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457180184826,"sku":"HS202141","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS202141_bbdab776-3c24-4241-9cb8-2ccafa668882.jpg?v=1785155554"},{"product_id":"elbow-225-degree-long-hide-a-hose-hs202142","title":"Hide A Hose 22.5 Degree Long Elbow","description":"\u003cp\u003eHS202142 is the long sweep 22.5 degree elbow for Hide-A-Hose pipe runs, in two inch. A gentle angle like this one nudges a run slightly off straight without putting in the sort of turn that would choke airflow.\u003c\/p\u003e\u003cp\u003eRadius matters more on a Hide-A-Hose system than on a conventional central vacuum, because the hose itself travels through the tubing rather than only the air. Hide-A-Hose specifies larger diameter pipe and larger radius fittings for exactly that reason. A short radius turn that a conventional system would tolerate can catch a hose partway through a retraction and leave it stranded inside the wall.\u003c\/p\u003e\u003cp\u003eThis elbow comes with adapters that let two inch Schedule 40 plumbing PVC join to two inch Schedule 20 vacuum PVC, which is the connection that trips up installers working around pipe already in the building. Work out which schedule sits on each side before anything is cut.\u003c\/p\u003e\u003cp\u003eDry-fit the elbow against the cut pipe ends before cement is applied. A fitting that is slightly off will look close enough to work right up until the cement is curing around a loose joint, and a leaking joint inside a wall is far harder to reach than one on the bench.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS202142\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e long radius 22.5 degree elbow, two inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e adapters for two inch Schedule 40 plumbing PVC to two inch Schedule 20 vacuum PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhy long radius:\u003c\/strong\u003e the retractable hose travels through the pipe, not just the air\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457180283130,"sku":"HS202142","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS202142_db9d3ffc-786b-4ccf-9f57-5bc7dca30b38.jpg?v=1785154183"},{"product_id":"end-cap-white-hide-a-hose-rapid-flex-hose-hs202203","title":"Hide A Hose End Cap White - Hide-A-Hose Rapid Flex Hose","description":"\u003cp\u003eThe white cap in this listing, part HS202203, seats into the open end of a Rapid Flex hose from Hide A Hose and holds that end round, which is what lets the hose slide back through the valve rather than pinching flat against the opening. It measures 1-3\/8 inches in diameter.\u003c\/p\u003e\u003cp\u003eWhite is what marks it as the Rapid Flex version. Hide A Hose uses a black cap, part HS202132, on its older style hoses, and the two caps are not interchangeable despite sharing a diameter, so match the color already on your hose rather than guessing from the picture.\u003c\/p\u003e\u003cp\u003eA split or missing cap announces itself during retraction long before anything else. The bare hose rim catches at the valve mouth, the hose wants a push to seat fully, and months of that repeated catching wear the hose end itself, turning an inexpensive cap into a hose replacement.\u003c\/p\u003e\u003cp\u003ePush the replacement in until it sits flush with the hose wall, with no lip standing above it, then cycle the hose in and out once to confirm it travels smoothly through the valve. Check the fit by hand as well, since a cap that can be rocked in the hose end has not gone in far enough, and one that will not seat at all is usually the wrong color variant for the hose you own.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS202203\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e white, the Rapid Flex version\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-3\/8 inch diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e keeps the hose end round so it retracts without pinching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for:\u003c\/strong\u003e older style hoses, which take the black HS202132 cap\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457180348666,"sku":"HS202203","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS202203_bc7f5c93-c88d-4c10-bc39-d5c412acff52.jpg?v=1785138990"},{"product_id":"mount-kit-stand-alone-hide-a-hose-hs3000hs4000-hs300053","title":"Hide A Hose Stand-Alone Mount Kit - HS3000\/HS4000","description":"\u003cp\u003eThis stand-alone mounting kit, part HS300053, is a two piece rough-in box that lets a Hide A Hose HS3000 or HS4000 trim kit go in where there is no wall cavity to put it in. Cabinets, closets and exterior walls are the usual places it ends up.\u003c\/p\u003e\u003cp\u003eIt mounts vertically or horizontally, so the box follows whatever the space allows rather than dictating the layout. The arrangement it was built for is exposed piping, the kind of install found in a garage, a workshop or a commercial space, where the retractable hose assembly sits on the wall surface instead of hiding inside it.\u003c\/p\u003e\u003cp\u003eThe trim kit is a separate purchase. This kit supplies the box and its mounting, not the finished valve face, so plan both parts of the order together when starting an installation from nothing. The box comes in two parts so it can be set into a cabinet wall or fastened to a finished surface without cutting a stud bay open.\u003c\/p\u003e\u003cp\u003eCheck depth and clearance in the cabinet or closet before ordering. The hose needs somewhere to travel behind the box, and the piping run has to reach the position you have chosen for it. Hose length matters here as well, since a longer hose needs more room behind the box.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS300053\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide A Hose HS3000 and HS4000 trim kits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e two piece stand-alone rough-in box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e vertical or horizontal, in a cabinet, closet or exterior wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e trim kit purchased separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457180414202,"sku":"HS300053","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS300053_d31db783-3696-4282-abf5-3eac0eafece5.jpg?v=1785150108"},{"product_id":"valve-rough-in-kit-hide-a-hose-fits-hs3000hs4000-valves-hs3000r","title":"Hide A Hose Valve Rough-In Kit - HS3000 and HS4000","description":"\u003cp\u003ePart HS3000R sets the framing and pipe connection for a Hide-A-Hose retractable valve before drywall goes up, and it serves both the HS3000 and HS4000 valve lines. It screws to the framing and holds the pipe and the eventual valve in position while the wall is closed in around it.\u003c\/p\u003e\u003cp\u003eBecause it goes in before the wall is finished, this stage is where mistakes get expensive. Pipe run, mounting depth, and stud spacing all need to match your installation plan now, since correcting a rough-in later means reopening a wall that was already closed up and painted.\u003c\/p\u003e\u003cp\u003eTake the extra few minutes to dry-fit the piping and confirm the frame sits square and level before fastening anything permanently. A rough-in that is even slightly out of alignment can leave the eventual trim sitting crooked once the wall is finished, which is a much harder thing to correct after the fact.\u003c\/p\u003e\u003cp\u003eConfirm you are installing an HS3000 or HS4000 valve before ordering. Hide-A-Hose sells separate rough-in kits for its HS5000 and 6000 PRO lines, and those are not interchangeable with this one. If you are unsure which valve you are planning around, check your project plans before setting the frame in place.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS3000R rough-in kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide-A-Hose HS3000 and HS4000 valves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e rough-in frame, rough-in pipe fitting, reducer, mud cover, retainer band, four mud cover screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage:\u003c\/strong\u003e installed pre-drywall, ahead of the finished trim\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457180479738,"sku":"HS3000R","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS3000R_a777fa8b-ab71-42d5-9748-ba07af2d4451.jpg?v=1785146250"},{"product_id":"ready-grip-new-style-no-rf-hide-a-hose-hs302190","title":"Hide A Hose Ready Grip Handle, Direct Connect, No RF","description":"\u003cp\u003eThe Ready Grip handle in this listing, part HS302190, is the Direct Connect version built without RF, meaning there is no wireless switch in the grip. On these installs the system is turned on and off by the hard wired low voltage switch in the wall inlet, and that switch has to be present and working for the handle to be usable.\u003c\/p\u003e\u003cp\u003eDirect Connect is what saves time day to day. The hose twists straight into the handle with no coupler in between, which works with the new style hoses that carry a male cuff. An older Hide A Hose hose may need a mini cuff fitted first before it will make that connection.\u003c\/p\u003e\u003cp\u003eThe grip has an ergonomic shape and a soft touch finish, and a quick connect button lock that makes a firm connection to the Comfort Seal ratchet wand.\u003c\/p\u003e\u003cp\u003eReplace a handle when the housing has cracked at the seam, when the wand no longer locks in securely, or when the grip has gone loose on the hose. Look at how your current handle joins the hose before ordering rather than judging fit from a photograph. The hose end is the detail that matters, since that is what has to twist into the new handle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS302190\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Ready Grip Direct Connect, no RF switch in the grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequires:\u003c\/strong\u003e the low voltage on\/off switch at the wall inlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnects:\u003c\/strong\u003e to new style hoses with a male cuff, one twist, no coupler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWand:\u003c\/strong\u003e quick connect button lock for the Comfort Seal ratchet wand\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457180512506,"sku":"HS302190","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS302190_43fb5561-5873-4c72-b4fc-a56a86e5de83.jpg?v=1785158121"},{"product_id":"ready-grip-new-style-rf-series-hide-a-hose-hs302191","title":"Hide A Hose Ready Grip RF Handle Kit, New Style","description":"\u003cp\u003eTurning the vacuum on from the handle instead of walking to the wall is what the RF version buys, and part HS302191 is the full kit that makes it possible. It ships with the RF Ready Grip handle carrying an F915 transmitter, plus the matching F915 receiver, a power adapter and two wires for connecting that receiver to the power unit.\u003c\/p\u003e\u003cp\u003eOne receiver serves the whole house. Up to ten handles can be programmed to a single receiver, so a second or third grip added later is a handle purchase rather than another complete kit. Adding a grip later means programming it to the receiver already in place rather than replacing any part of the existing setup.\u003c\/p\u003e\u003cp\u003eThe handle matches the rest of the Ready Grip line: an ergonomic shape, a soft touch finish, and a quick connect button lock that seats the Comfort Seal ratchet wand firmly.\u003c\/p\u003e\u003cp\u003eBecause the receiver is in the box, this is the part to order when RF control is being added to a system for the first time. Where a receiver is already installed and only the handle has failed, the sender only version is the cheaper order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS302191\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit contents:\u003c\/strong\u003e RF Ready Grip handle, F915 transmitter and receiver, a power adapter, two connection wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e up to ten handles per receiver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e wireless on and off control of the power unit from the grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWand:\u003c\/strong\u003e quick connect button lock for the Comfort Seal ratchet wand\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457180578042,"sku":"HS302191","price":208.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS302191.jpg?v=1785156919"},{"product_id":"ready-grip-new-style-sender-only-hide-a-hose-hs302192","title":"Hide A Hose Ready Grip RF Handle, Sender Only","description":"\u003cp\u003eA sender handle without a receiver is what part HS302192 provides, the RF Ready Grip Direct Connect version. It transmits the on and off signal but carries no receiver of its own, so it works only where one is already installed at the power unit, normally the receiver that came with the HS302191 kit.\u003c\/p\u003e\u003cp\u003eThat makes it the right order in two situations: a failed RF handle on a system whose receiver is still good, or a second grip added to a house that already has RF control. Up to ten senders can be programmed to one receiver, and the sender frequency has to match what that receiver is listening for.\u003c\/p\u003e\u003cp\u003eThe hose twists directly into the handle with no coupler. On older Hide A Hose hoses a mini cuff, part HS5000H4, has to be fitted to each hose first before the direct connection will work.\u003c\/p\u003e\u003cp\u003eIf the system has stopped responding to every handle rather than only this one, check the receiver and its power connection before ordering a replacement sender. It is also worth confirming which kit the receiver came from, since the sender has to be on the same frequency before it can be programmed to it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS302192\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e RF sender handle only, no receiver in the box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequires:\u003c\/strong\u003e an installed receiver, such as the one supplied in kit HS302191\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e up to ten senders programmed to one receiver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOlder hoses:\u003c\/strong\u003e need mini cuff HS5000H4 fitted for direct connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457180676346,"sku":"HS302192","price":131.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS302192_2945a755-4f52-4ed5-ad6b-210c79767c08.jpg?v=1785156106"},{"product_id":"air-regulator-ready-grip-no-rf-hide-a-hose-hs302193","title":"Hide A Hose Ready Grip Air Regulator, No RF","description":"\u003cp\u003eHide-A-Hose builds its Ready Grip handle in more than one configuration, and part HS302193 is the plain one: direct connect to the hose, a bleeder valve for suction control, and no RF electronics. The RF versions carry their own numbers, HS302194 and HS302195, so if your system uses a wireless on and off at the handle, this is not the piece you want.\u003c\/p\u003e\u003cp\u003eA bleeder valve controls suction by letting a measured amount of outside air into the airstream rather than by throttling the motor, so the power unit keeps running at full speed while the pull at the nozzle drops. That is what you open when a rug corner or a curtain hem starts climbing the tool. The valve is also the one moving part in the handle most likely to wear: a regulator stuck open leaves weak pickup that will not respond to the control, and one stuck closed gives full suction whatever you do with it.\u003c\/p\u003e\u003cp\u003eThis listing does not include a coupler. If your hose uses the newer mini cuff and your handle is an older style, the adapter between them is a separate part, HS502190, so check which cuff your hose carries before ordering either piece.\u003c\/p\u003e\u003cp\u003eCompare the connection at the hose end against your current handle before you buy. A handle that looks similar but seats differently will not join securely, and forcing a mismatched fit tends to crack a housing rather than solve anything.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS302193\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Ready Grip handle, direct connect, bleeder valve, no RF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included:\u003c\/strong\u003e coupler, sold separately as HS502190\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF alternatives:\u003c\/strong\u003e HS302194 and HS302195\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457180709114,"sku":"HS302193","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS302193_17536a4c-e82d-40d5-a992-865d3a3b8b70.jpg?v=1785156924"},{"product_id":"ready-grip-rf-direct-connect-air-regulator-hide-a-hose-hs302194","title":"Hide A Hose Ready Grip RF Handle Kit, Air Regulator","description":"\u003cp\u003eWireless control and a suction regulator in one grip describe part HS302194, a Direct Connect Ready Grip handle kit for Hide A Hose systems. It is sold as a kit that includes the hardware needed to get the RF remote control activated, so the handle arrives ready to commission rather than needing a receiver sourced separately.\u003c\/p\u003e\u003cp\u003eWith the receiver in place, the handle can be carried from one inlet to the next and switch the system on and off from its built in switch wherever it is plugged in. A single receiver supports up to ten handles, so additional grips can follow later without a second receiver.\u003c\/p\u003e\u003cp\u003eThe regulator on the grip is a vent that opens to take the edge off suction for a curtain, a lampshade or a loose rug, and closes again for carpet. Being a moving part, it can stick or stop closing fully with age, which reads as suction that never quite reaches full strength.\u003c\/p\u003e\u003cp\u003eUse with older hoses may call for an adapter, and the mini cuff is the usual part for that, so check the end of your hose before ordering. The mini cuff comes in two versions, so match it to whether your hose carries a sock.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS302194\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e RF Direct Connect Ready Grip kit with air regulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e the hardware needed to activate the RF remote control handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e a single receiver supports up to ten handles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOlder hoses:\u003c\/strong\u003e may need a mini cuff adapter for direct connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457180774650,"sku":"HS302194","price":214.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS302194_c8829d3c-ff9b-4c16-8e2a-e8b5136c5fd6.jpg?v=1785153425"},{"product_id":"ready-grip-rf-direct-connect-sender-air-regulator-hide-a-hose-hs302195","title":"Hide A Hose Ready Grip RF Sender, Air Regulator","description":"\u003cp\u003eWhere a receiver is already installed, part HS302195 is the handle on its own: a Direct Connect Ready Grip with RF and a built in air regulator, sold as the sender half with no receiver in the box. It assumes the receiving end of the system is in place and working.\u003c\/p\u003e\u003cp\u003eUp to ten handles can run from one receiver, so this is also the part to order when adding a second or third grip to a house rather than replacing one that has failed.\u003c\/p\u003e\u003cp\u003eThe air regulator is a vent on the grip, opened to ease suction on light fabric and closed for full pull on carpet. As a moving part it can stick or stop closing fully with age, which shows up as suction that never reaches full strength even with the vent shut. Closing it fully is worth doing before anything else when suction seems down, since a regulator left slightly open accounts for more weak-suction complaints than any failed part.\u003c\/p\u003e\u003cp\u003eOlder Hide A Hose hoses may need an adapter for the direct connection, with the mini cuff being the usual part. Test a new sender close to the receiver first, since a weak signal at distance looks the same as a failed handle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS302195\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e RF Direct Connect Ready Grip sender with air regulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequires:\u003c\/strong\u003e a receiver already installed at the power unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e a single receiver supports up to ten handles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOlder hoses:\u003c\/strong\u003e may need an adapter such as the mini cuff\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457180840186,"sku":"HS302195","price":135.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS302195_650ae294-cfa0-4e84-bb88-1f76775fdda4.jpg?v=1785154111"},{"product_id":"valve-rough-in-conversion-kit-white-hide-a-hose-hs4000-to-hs5000-hs400055","title":"Valve Rough-In Conversion Kit White - Hide A Hose HS4000 to HS5000","description":"\u003cp\u003eThis \u003cstrong\u003erough-in valve conversion kit\u003c\/strong\u003e in white contains the parts to convert a Hide A Hose HS4000-series rough-in to the newer HS5000 style. It lets you upgrade an existing in-wall valve to the current series without opening the wall and replacing the whole installation.\u003c\/p\u003e\u003cp\u003eOlder-series valves limit you to the features of that generation, and a full in-wall replacement is invasive and costly. This kit adapts the existing rough-in to accept the HS5000 valve, so you gain the newer valve's improvements with a straightforward swap.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide A Hose HS4000 rough-in, converting to HS5000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e conversion kit #HS400055, white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e adapts an HS4000 rough-in to the HS5000 valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e confirm your existing valve series before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe kit installs at the existing rough-in without a full in-wall rebuild. Verify that your current valve is the HS4000 series so the conversion parts match, then fit the HS5000 valve once the rough-in is adapted.\u003c\/p\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457180872954,"sku":"HS400055","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS400055_11de7122-77e0-4ea7-9f38-7797322a4a02.jpg?v=1785155688"},{"product_id":"valve-trim-kit-almond-hide-a-hose-hs4000-hs4000a","title":"Hide A Hose Valve Trim Kit - HS4000, Almond","description":"\u003cp\u003ePart HS4000A is the almond valve trim kit for a Hide-A-Hose HS4000 retractable inlet. Despite the name, this is not a bare cover plate: the kit supplies the inlet valve itself along with the finish door, a low voltage switch, four screws, two wire nuts, and a silicone pack, so it is what you order to put a complete working inlet on a wall.\u003c\/p\u003e\u003cp\u003eThe valve is where the retractable hose lives between uses. Pulling the hose out and fitting a handle lets you clean the room, and the central vacuum's own suction draws it back inside the wall when you are done, so the door and its seal are working parts rather than decoration.\u003c\/p\u003e\u003cp\u003eHide-A-Hose built the HS4000 series to take over from the discontinued HS3000 without changes to the existing piping or the drywall cutout, which makes it the usual replacement path for an older system with a failed inlet. It is sized for standard two-by-four wall framing.\u003c\/p\u003e\u003cp\u003eAlmond is one of several finishes offered on this line, so hold it against the wall plates and switch covers already in the room before ordering, since a warm neutral shifts noticeably between a screen and a wall. Confirm the HS4000 line as well, since the newer HS5000 and 6000 PRO valves take their own trim.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS4000A valve trim kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide-A-Hose HS4000 series, and replaces the discontinued HS3000 without piping changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e inlet valve, finish door, low voltage switch, four screws, two wire nuts, silicone pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e almond\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457180938490,"sku":"HS4000A","price":164.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS4000A.jpg?v=1785154579"},{"product_id":"valve-repair-kit-hide-a-hose-hs4000-hs4000v-skit","title":"Hide A Hose Valve Repair Kit - HS4000","description":"\u003cp\u003ePart HS4000V-SKIT restores the internal sealing sleeve of a Hide-A-Hose retractable inlet valve. It is the surface the hose end rides against every time it locks in or releases, and it is the wear point that ends most of these valves rather than anything mechanical failing.\u003c\/p\u003e\u003cp\u003eOnce that sleeve hardens or splits, the valve loses its airtight seal at the inlet even though the hose and power unit are otherwise fine. The hose will seat but feel loose doing it, and suction measured at that one inlet drops compared with others on the same system.\u003c\/p\u003e\u003cp\u003eTesting another inlet before ordering is worth the two minutes, since a suction problem that appears only at this one location, rather than everywhere, is the clearest sign the fault is the valve sleeve and not the power unit or piping. A drop at every inlet points elsewhere and is not something this kit will fix.\u003c\/p\u003e\u003cp\u003eHide-A-Hose lists this kit for both the HS4000 valve and the earlier HS3000 it replaced, and the box holds a top cap, a rubber sealing sleeve, six mounting screws, and a printed instruction sheet. Before starting, the hose has to come off the valve completely, and the valve body typically has to come out of the wall to reach the sleeve.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS4000V-SKIT valve repair kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide-A-Hose HS4000 and the earlier HS3000 valves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e a cap, sealing sleeve, mounting screws, printed instructions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore you start:\u003c\/strong\u003e remove the hose fully, then remove the valve from the wall\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457181004026,"sku":"HS4000V-SKIT","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS4000V-SKIT_55053d65-2b54-4e74-8bc5-998c1e699f42.jpg?v=1785143746"},{"product_id":"valve-trim-kit-white-hide-a-hose-hs4000-hs4000w","title":"Hide A Hose Valve Trim Kit - HS4000, White","description":"\u003cp\u003eThe HS4000W kit puts a complete white Hide-A-Hose inlet on the wall rather than just a cover for one. Packaged under this single part number are the inlet valve, the finish door, a low voltage switch, four screws, two wire nuts, and a silicone pack.\u003c\/p\u003e\u003cp\u003eWhite is the finish that disappears against standard wall plates in most homes, which is why it is the common choice on this line. It is also the finish that shows its age first, since plastic near a sunny window or a heat source can pick up a faint yellow cast years before anything on the valve stops working.\u003c\/p\u003e\u003cp\u003eBecause the retractable hose is stored inside the wall behind this inlet, the door and its seal see use every time the hose comes out and every time suction pulls it back in. A door that no longer closes tight is a working fault rather than a cosmetic one, and worth checking before assuming a suction complaint starts at the power unit.\u003c\/p\u003e\u003cp\u003eThis is the HS4000 series, which Hide-A-Hose designed to drop into a home already piped for the discontinued HS3000 without altering the piping or enlarging the drywall cutout, and it fits standard two-by-four framing. Confirm your system is not the newer HS5000 or 6000 PRO, since those lines carry their own trim.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS4000W valve trim kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide-A-Hose HS4000 series, and replaces the discontinued HS3000 without piping changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e inlet valve, finish door, low voltage switch, four screws, two wire nuts, silicone pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e white\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457181036794,"sku":"HS4000W","price":206.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS4000W_8de66c0a-d30e-4686-81ab-e29ff286a3ea.jpg?v=1785155511"},{"product_id":"hide-a-hose-white-valve-door-hs4000w-d","title":"Hide A Hose White Valve Door","description":"\u003cp\u003eThis is the white valve door, part HS4000W-D, the hinged cover on the wall inlet of a Hide-A-Hose system. It is the only part of the whole installation anyone actually sees, and the part that gets caught by vacuum handles, furniture and children.\u003c\/p\u003e\u003cp\u003eDoors break at the hinge or at the catch. A door that no longer closes leaves the inlet open to room air, and an open inlet anywhere in the system bleeds off suction everywhere else in the house, so the fault usually turns up at a completely different inlet from the broken one. A cracked door also stops sitting flush, and it shows.\u003c\/p\u003e\u003cp\u003eMatch the door to the valve rather than to the power unit — doors are specific to the valve they belong to, so check the number on your existing door or valve trim before ordering. Fitting one is a few minutes' work at the wall plate.\u003c\/p\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457181102330,"sku":"HS4000W-D","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS4000W-D.jpg?v=1785158152"},{"product_id":"rapid-flex-hose-30-ft-hide-a-hose-hs402153p","title":"Hide A Hose Rapid Flex Hose, 30 ft","description":"\u003cp\u003eThirty feet is the shortest Rapid Flex length Hide A Hose offers, and part HS402153P is that hose. Like the rest of the line it is made from a soft flexible nylon that resists scratching and needs no hose sock over it, so nothing is fitted around this hose before it goes into the wall.\u003c\/p\u003e\u003cp\u003eTwo things separate Rapid Flex from the older sock hoses. The tubing runs a larger diameter, which raises airflow by 20 to 30 percent, and the softer material pulls out and retracts with noticeably less effort. A mini cuff on the end, the blue 1-3\/8 inch HS5000H5, lets tools connect straight to the hose.\u003c\/p\u003e\u003cp\u003eA 30 foot run suits an install with inlets placed close to the rooms they serve. Match the length to the hose already in the wall rather than to how far you wish it would reach, since the tubing run and the valve position were sized together at installation.\u003c\/p\u003e\u003cp\u003eWhen suction drops, lay the full length out straight and check it end to end. A hairline split can stay closed while the hose is coiled inside the tubing and open only once it is stretched to working length, which is exactly when the seal matters.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS402153P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 30 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e soft flexible nylon, scratch resistant, no hose sock needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e larger diameter than the sock hose, 20 to 30 percent more air\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuff:\u003c\/strong\u003e mini cuff fitted, tools connect directly\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457181167866,"sku":"HS402153P","price":104.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS402153P_aed53261-2dcf-46fe-ba14-ae82482fb28a.jpg?v=1785142491"},{"product_id":"rapid-flex-hose-40-ft-hide-a-hose-hs402154p","title":"Hide A Hose Rapid Flex Hose, 40 ft","description":"\u003cp\u003eThe 40 foot Rapid Flex hose, part HS402154P, is the mid length in the Hide A Hose retractable line. Its selling point is the tubing itself: a larger diameter than the older sock hose, which raises airflow through the hose by 20 to 30 percent at the same motor.\u003c\/p\u003e\u003cp\u003eSoft flexible nylon does the rest of the work. The material is scratch resistant and needs no hose sock over it, and it pulls out and retracts with less effort than the sock hoses it replaced, which is what most people notice first after a swap.\u003c\/p\u003e\u003cp\u003eA mini cuff comes fitted at the end, the blue 1-3\/8 inch HS5000H5, so attachments push straight on with no coupler between the hose and the tool. That counts for more on a longer hose, where a coupler at the tool end is one more joint able to leak air.\u003c\/p\u003e\u003cp\u003eConfirm 40 feet against the hose currently installed rather than estimating from how far it reaches now. A hose near the end of its life often sags or stretches slightly, and measuring by reach rather than by the marked length is how people end up with the wrong size. The length is normally marked on the hose near one of the cuffs, and the installation paperwork records it too.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS402154P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 40 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e soft flexible nylon, scratch resistant, no hose sock needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e larger diameter than the sock hose, 20 to 30 percent more air\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuff:\u003c\/strong\u003e mini cuff fitted, tools connect directly\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457181987066,"sku":"HS402154P","price":132.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS402154P_124664eb-b10f-4c7b-8a84-d9dd27be4d77.jpg?v=1785140835"},{"product_id":"rapid-flex-hose-50-ft-hide-a-hose-hs402155p","title":"Hide A Hose Rapid Flex Hose, 50 ft","description":"\u003cp\u003eHide A Hose cuts its Rapid Flex hose to 50 feet as part HS402155P, one of the longer options in the line and suited to a valve placed to cover more than one room. The hose runs bare inside the wall tubing, since the Rapid Flex nylon is scratch resistant and takes no hose sock.\u003c\/p\u003e\u003cp\u003eDropping the sock is not only a convenience. It leaves room for a larger tubing diameter, which is where the 20 to 30 percent airflow gain over the sock hoses comes from, and it removes the part that used to wear out first on a retractable hose.\u003c\/p\u003e\u003cp\u003eThe mini cuff at the end is the blue 1-3\/8 inch HS5000H5, which tools connect to directly and which also stops the hose at the right point as it draws back into the valve.\u003c\/p\u003e\u003cp\u003eOn a run this long, inspect the hose in sections rather than only at the ends. Run a hand along a few feet at a time in good light, feeling for a soft spot or a hairline split, since that is where a leak hides while both cuffs still look sound. Do the check with the hose fully out of the tubing, since a section still coiled in the wall hides exactly the kind of split you are hunting for, and do it somewhere well lit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS402155P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e soft flexible nylon, scratch resistant, no hose sock needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e larger diameter than the sock hose, 20 to 30 percent more air\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuff:\u003c\/strong\u003e mini cuff fitted, tools connect directly\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182052602,"sku":"HS402155P","price":158.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS402155P.jpg?v=1785138774"},{"product_id":"rapid-flex-hose-60-ft-hide-a-hose-hs402156p","title":"Hide A Hose Rapid Flex Hose, 60 ft","description":"\u003cp\u003eAt 60 feet, part HS402156P is the longest Rapid Flex hose Hide A Hose builds, meant for valve locations that have to reach the far end of a house or for installs with fewer inlets covering more floor each.\u003c\/p\u003e\u003cp\u003eLength is the one thing that works against a retractable hose, and Rapid Flex is where the design answers it. The soft flexible nylon pulls out and retracts more easily than the older sock hoses, needs no sock over it at all, and runs a larger diameter that lifts airflow by 20 to 30 percent, so the extra distance costs less suction than it once did.\u003c\/p\u003e\u003cp\u003eTools connect straight onto the mini cuff at the end, the blue 1-3\/8 inch HS5000H5, with no coupler in between.\u003c\/p\u003e\u003cp\u003eCheck a hose this long in daylight rather than in a dim utility room. Kinks that have set in over time, cracking at repeated bend points, and sections that feel softer than the rest are all easy to miss under poor light and obvious once the hose is stretched out somewhere bright. Pull the whole length out for that check rather than inspecting whatever happens to be exposed, since the section still sitting in the wall is the part doing most of the work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS402156P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 60 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e soft flexible nylon, scratch resistant, no hose sock needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e larger diameter than the sock hose, 20 to 30 percent more air\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuff:\u003c\/strong\u003e mini cuff fitted, tools connect directly\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182118138,"sku":"HS402156P","price":190.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS402156P_7738f352-43f4-4757-b55e-e9bfa526f222.jpg?v=1785156000"},{"product_id":"trim-cover-pre-plumb-hide-a-hose-hs500050","title":"Hide A Hose Pre-Plumb Trim Cover","description":"\u003cp\u003ePart HS500050 is Hide-A-Hose's pre-plumb trim cover, the plate that closes a roughed-in valve opening while a house is still being built. It is a construction-stage part rather than a finished fixture, and it stays on the wall only until the valve itself goes in.\u003c\/p\u003e\u003cp\u003eBuilders pre-plumb for a retractable hose system long before anyone moves in, which leaves an open pipe stub behind a hole in the framing through months of drywall dust, sawdust, and general site debris. This cover mounts to the rough-in frame and closes that opening so none of it ends up inside the piping.\u003c\/p\u003e\u003cp\u003eWhat falls into a central vacuum line during construction does not simply pass through once the system runs. Screws, drywall scrap, and offcuts settle at the first elbow and stay there, and clearing a blockage from a line already sealed inside a finished wall is far more work than covering the opening was.\u003c\/p\u003e\u003cp\u003eHide-A-Hose has used more than one rough-in frame across its valve lines, so check which frame your home was plumbed with before ordering rather than matching on appearance alone. If the system is already finished and you want the cover that stays on the wall permanently, that is a valve trim kit rather than this pre-plumb piece.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS500050 pre-plumb trim cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage:\u003c\/strong\u003e installed during construction, before the valve goes in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e keeps construction debris out of the roughed-in piping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck before ordering:\u003c\/strong\u003e confirm which Hide-A-Hose rough-in frame the home was plumbed with\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182183674,"sku":"HS500050","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS500050_aeec017d-7316-4cc7-8f94-2ec3e859203d.jpg?v=1785157181"},{"product_id":"valve-trim-kit-almond-new-style-hide-a-hose-hs5000-hs5000a","title":"Hide A Hose Trim Kit - HS5000 New Style, Almond","description":"\u003cp\u003eHide-A-Hose ships the HS5000A as a complete almond inlet rather than a cover alone. The kit carries the inlet valve, the full finish inlet door, a low voltage switch, four screws, and two wire nuts. The 5000 is the newer generation valve, which is where the new style label on this part comes from.\u003c\/p\u003e\u003cp\u003eWhat changed in that generation is mostly size and sealing. The 5000 body is about 38 percent smaller than the earlier Hide-A-Hose valves, the rubber door seal was improved, and the hose locking system was reworked around a simple on and off switch. It adjusts to wall thicknesses up to one and a half inches.\u003c\/p\u003e\u003cp\u003eThat smaller body matters most where the framing is tight or a cabinet run limits how much depth is available behind the wall. Somewhere an older valve would not fit, the 5000 often will, which is part of why it turns up in remodels rather than only in new construction.\u003c\/p\u003e\u003cp\u003eAlmond is one of three finishes offered here alongside white and black. Confirm you are ordering for the 5000 series before choosing a color, since the earlier HS4000 valve and the 6000 PRO both take their own trim and are not interchangeable with this one.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS5000A valve trim kit, new style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide-A-Hose HS5000 series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e inlet valve, full finish inlet door, low voltage switch, four screws, two wire nuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e almond\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182216442,"sku":"HS5000A","price":187.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS5000A_fe48775d-dff6-4492-bbba-4396ddc60148.jpg?v=1785155847"},{"product_id":"valve-door-almond-hide-a-hose-hs5000a-d","title":"Hide A Hose Valve Door - Almond-hide a Hose","description":"\u003cp\u003eAlmond replacement door for Hide-A-Hose HS5000 series inlet valves, part HS5000A-D. Order this one when the inlets in your house are almond rather than white or black; the door is the visible face of the valve, and a mismatched color shows from across the room.\u003c\/p\u003e\u003cp\u003eIt earns its keep mechanically as well. The door seals the inlet when nothing is plugged into it, and a central vacuum only pulls properly when every unused inlet in the house is shut. A broken hinge or a catch that no longer holds is an air leak that quietly weakens suction at every other point on the system, which makes it a surprisingly hard fault to trace back to its source.\u003c\/p\u003e\u003cp\u003eCheck the number on your door or valve trim before ordering, since doors are matched to a valve series rather than to the power unit. Replacing one is a quick job at the wall plate.\u003c\/p\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182281978,"sku":"HS5000A-D","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS5000A-D_391948a2-3ef3-4f0a-84bf-38d390e91135.jpg?v=1785138614"},{"product_id":"valve-trim-kit-black-new-style-hide-a-hose-hs5000-hs5000b","title":"Hide A Hose Trim Kit - HS5000 New Style, Black","description":"\u003cp\u003eBlack is the outlier among the three finishes Hide-A-Hose offers on its 5000 series inlet, and HS5000B is that version. Like the almond and white kits, it supplies a working inlet rather than a finish plate: the inlet valve, the full finish inlet door, a low voltage switch, four screws, and two wire nuts.\u003c\/p\u003e\u003cp\u003eAlmond and white were chosen to disappear into decades of standard wall plates. Black reads as deliberate instead, and suits a room already built around dark hardware and fixtures. Since an inlet sits low on a wall and stays there for the life of the house, that is worth weighing against the rest of the room rather than in isolation.\u003c\/p\u003e\u003cp\u003eUnderneath the finish this is the current 5000 series valve: roughly 38 percent smaller than the earlier Hide-A-Hose valves, with an improved rubber door seal, a reworked hose locking system, and a simple on and off switch. It adjusts to wall thicknesses up to one and a half inches.\u003c\/p\u003e\u003cp\u003eConfirm your system is on the 5000 series before ordering. The older HS4000 valve and the 6000 PRO each take their own trim, and none of the three lines are interchangeable with one another. If the rough-in label behind the wall is still legible, that settles the question faster than judging from the shape of the door you are replacing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS5000B valve trim kit, new style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide-A-Hose HS5000 series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e inlet valve, full finish inlet door, low voltage switch, four screws, two wire nuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182347514,"sku":"HS5000B","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS5000B_de38e928-943e-4c41-9423-5a6b85ca0ea2.jpg?v=1785157313"},{"product_id":"valve-door-black-hide-a-hose-hs5000b-d","title":"Hide A Hose Valve Door - Black-hide a Hose","description":"\u003cp\u003ePart HS5000B-D is the black door for Hide-A-Hose HS5000 series inlet valves. Black is the one people choose for garages, shops and basement walls, where an inlet sits somewhere it is going to be knocked rather than admired.\u003c\/p\u003e\u003cp\u003eDoors are the failure point of any inlet. The hinge snaps, the catch wears until the door swings loose, or the face cracks when something heavy goes past it. However it breaks, the result is the same: the inlet stops sealing, and an inlet that does not seal leaks air the whole system pays for. If suction has faded across the house and there is no blockage to find, walking around and pushing every door shut is a five minute test worth doing first.\u003c\/p\u003e\u003cp\u003eOrder by the number on the door or valve trim rather than by the machine, and check the color before you commit — these come in white, almond and black.\u003c\/p\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182380282,"sku":"HS5000B-D","price":18.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS5000B-D_06607ff9-67ad-4d8f-84de-772858ca7e2a.jpg?v=1785144418"},{"product_id":"mini-cuff-new-style-hide-a-hose-for-sock-hoses-hs5000h4","title":"Hide A Hose Mini Cuff - Black 1-1\/4 inch, SmartSoc","description":"\u003cp\u003eHide A Hose fits its SmartSoc hoses with a black mini cuff, and part HS5000H4 is the new style version of it, 1-1\/4 inches across. The Rapid Flex hose takes a different cuff, the blue 1-3\/8 inch HS5000H5, and the two are not interchangeable.\u003c\/p\u003e\u003cp\u003eThe cuff connects the hose to a Ready Grip Direct Connect handle and lets tool kit accessories push straight onto the hose end without a coupler. It also serves as the stop that catches the hose as it retracts into the valve, which is why a sock hose should not be sent back into the wall with the cuff missing.\u003c\/p\u003e\u003cp\u003eTo fit one, tuck a quarter to a half inch of the sock into the hose end, then screw the cuff into the hose counterclockwise until it seats firmly against the end. The cuff will take one or two o-rings as well, part HS500122, which add friction where the valve door closes against it.\u003c\/p\u003e\u003cp\u003eReplace a cuff when the collar has cracked, when a tool no longer locks on securely, or when the hose stops halting where it should on retraction. Check that the new cuff seats to the same depth as the old one before sending the hose back into the wall.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS5000H4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor and size:\u003c\/strong\u003e black, 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide A Hose SmartSoc sock hoses, not Rapid Flex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e direct tool and handle connection, plus retraction stop at the valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e tuck the sock in, screw counterclockwise until seated\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182445818,"sku":"HS5000H4","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS5000H4_b17cc820-27c4-493c-aef6-9d645722697a.jpg?v=1785147690"},{"product_id":"hose-cuff-blue-1-38-hide-a-hose-rapid-flex-no-sock-hoses-hs5000h5","title":"Hide A Hose Cuff - Blue 1-3\/8 inch, Rapid Flex","description":"\u003cp\u003eBlue marks the Rapid Flex cuff in the Hide A Hose lineup. Part HS5000H5 measures 1-3\/8 inches and fits the Rapid Flex hose only, the version that runs without a hose sock, while the SmartSoc hose takes the black 1-1\/4 inch cuff instead. The two do not swap.\u003c\/p\u003e\u003cp\u003eThis cuff does two jobs at once. It connects the hose to a Ready Grip Direct Connect handle and lets tool kit accessories push straight on without a coupler in between, and it acts as the stop that catches the hose at the right point as it retracts into the valve. A hose should never be retracted with the cuff missing for that second reason alone.\u003c\/p\u003e\u003cp\u003eIf a cuff has backed off the hose rather than cracked, screw it back in counterclockwise until it seats firmly against the hose end. Where the hose end itself has been chewed up, trim two to three inches off with scissors and fit the cuff onto fresh material.\u003c\/p\u003e\u003cp\u003eThe cuff also accepts one or two o-rings, sold as the HS500122 ten pack, which add friction where the valve door closes onto it. Fit no more than two, since additional rings change how the door meets the hose end, and add them only when the door has started closing loosely rather than as a matter of course.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS5000H5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor and size:\u003c\/strong\u003e blue, 1-3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide A Hose Rapid Flex hose only, not SmartSoc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e direct tool connection and retraction stop at the valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e screw in counterclockwise until firmly seated against the hose end\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182544122,"sku":"HS5000H5","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS5000H5_7f6b230a-bf29-4562-b919-9a978006c361.jpg?v=1785148808"},{"product_id":"valve-rough-in-kit-hide-a-hose-hs5000-hs5000r","title":"Hide A Hose Valve Rough-In Kit - HS5000","description":"\u003cp\u003ePart HS5000R is the rough-in kit for the HS5000 line of Hide-A-Hose retractable valve, installed in the wall cavity before drywall closes it in. It sets the pipe connection and the mounting position the finished HS5000 inlet will attach to once the room is done.\u003c\/p\u003e\u003cp\u003eThe kit covers that whole stage: a rough-in frame, the rough-in pipe fitting, a reducer, a mud cover to keep the opening protected while the wall is finished, and four screws for that cover. Note that it does not include a retainer band, which the older HS3000 and HS4000 rough-in kit does carry.\u003c\/p\u003e\u003cp\u003eSince correcting a rough-in after the wall is finished means reopening it, confirm pipe run, mounting depth, and stud spacing against your installation plan while the frame is still accessible. Check that the frame sits square in the opening too, since a crooked rough-in shows up later as trim that never quite sits flush.\u003c\/p\u003e\u003cp\u003eThis kit is specific to the HS5000 line and is not the same as the HS3000 and HS4000 rough-in or the 6000 PRO version. Confirm which valve you are installing before ordering, since this stage is far easier to get right the first time than to correct once the room is closed up.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS5000R rough-in kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide-A-Hose HS5000 valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e rough-in frame, rough-in pipe fitting, reducer, mud cover, four mud cover screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage:\u003c\/strong\u003e installed pre-drywall, ahead of the finished inlet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182576890,"sku":"HS5000R","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS5000R.jpg?v=1785155159"},{"product_id":"rough-in-hose-stop-reducer-hide-a-hose-hs5000r-r","title":"Rough-In Hose Stop Reducer - Hide A Hose","description":"\u003cp\u003eThis \u003cstrong\u003erough-in hose stop reducer\u003c\/strong\u003e (part #HS5000R) is an in-wall component for Hide A Hose retractable central vacuum systems. It works at the rough-in to stop the hose at the correct point and reduce the fitting to the proper size for the run.\u003c\/p\u003e\u003cp\u003eAn in-wall system depends on each rough-in part being correct, since a worn or wrong-sized stop can let the hose overshoot or seat poorly. The matched reducer keeps the retractable hose stopping and seating where it should for reliable operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide A Hose retractable central vacuum systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e rough-in hose stop reducer #HS5000R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e stops the hose and reduces the fitting at the rough-in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e plan this as part of the in-wall assembly, not a surface swap\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBecause it installs in the wall, professional installation is recommended. Confirm your Hide A Hose configuration before ordering so the reducer matches your rough-in and the hose seats correctly.\u003c\/p\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182642426,"sku":"HS5000R-R","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS5000R-R_337ba9bf-8110-4534-8ad6-9cd504c7dfd2.jpg?v=1785155375"},{"product_id":"valve-rough-in-kit-concrete-hide-a-hose-hs5000-hs5000rcw","title":"Valve Rough-In Kit Concrete - Hide A Hose HS5000","description":"\u003cp\u003eBuilt for concrete installations, this \u003cstrong\u003erough-in valve kit\u003c\/strong\u003e (part #HS5000RCW) serves the Hide A Hose HS5000 central vacuum valve. It provides the structural mounting point set into the wall during construction, before drywall or finish goes on.\u003c\/p\u003e\u003cp\u003eThe rough-in is the foundation the finished valve trim mounts to later, so it has to be correct and solidly placed at the framing stage. This concrete kit gives the HS5000 valve a proper anchor in a masonry wall so the finished inlet seats flush and secure.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide A Hose HS5000 valve, concrete installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e rough-in kit #HS5000RCW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e structural in-wall mounting point for the valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e set it during construction before the wall is closed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstall the rough-in at the framing or pour stage, then add the finished valve trim once the wall is complete. Professional installation is recommended for in-wall central vacuum components.\u003c\/p\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182707962,"sku":"HS5000RCW","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS5000RCW_6202094b-4a9d-4087-8f71-184dff2e3c65.jpg?v=1785156312"},{"product_id":"valve-locking-sleeve-kit-hide-a-hose-hs5000-hs5000v-lskit","title":"Hide A Hose Valve Locking Sleeve Kit - HS5000","description":"\u003cp\u003ePart HS5000V-LSKIT replaces the locking sleeve that seals a Hide-A-Hose HS5000 series valve at the point where the hose end locks in and pulls back out. Keeping that connection airtight is the sleeve's only job, and it does it thousands of times over the life of a system.\u003c\/p\u003e\u003cp\u003eWear shows up right where the hose end rubs against the sleeve on every insertion, and once the rubber hardens or splits, the seal at the inlet stops holding even though nothing else on the system has changed. A hose that feels loose the moment it seats, paired with a drop in suction that only shows up at that one inlet, points straight back to this part.\u003c\/p\u003e\u003cp\u003eSince the sleeve sits inside the valve body rather than on the visible trim, confirming the fault is here usually means testing suction at that inlet against a known-good inlet on the same system before ordering. If every inlet shows the same weak pull, the cause is more likely upstream in the piping or at the power unit rather than this one sleeve.\u003c\/p\u003e\u003cp\u003eThe kit arrives with the rubber sleeve, four screws and nuts, eight nylon washers, and an instruction sheet, and it is matched to the HS5000 series valve. Confirm your valve line before ordering, since the sleeve is not shared with the earlier Hide-A-Hose valve generations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS5000V-LSKIT valve locking sleeve kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide-A-Hose HS5000 series valves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e rubber sleeve, four screws and nuts, eight nylon washers, instruction sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom it fixes:\u003c\/strong\u003e a loose hose seat and suction loss at one inlet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182740730,"sku":"HS5000V-LSKIT","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS5000V-LSKIT.jpg?v=1785141465"},{"product_id":"switch-kit-valve-trim-hide-a-hose-hs5000v-s","title":"Hide A Hose Valve Trim Switch Kit - HS5000 Series","description":"\u003cp\u003ePart HS5000V-S is the small switch assembly built into the valve trim of a Hide-A-Hose HS5000 series inlet. Sliding a hose into the inlet closes this switch, and that closed circuit is what tells the power unit in the utility room or garage to spin up.\u003c\/p\u003e\u003cp\u003eA failing switch produces a confusing complaint. Everything looks normal at the wall, the hose seats, yet the machine never starts, and the power unit gets blamed for a problem that is actually happening at the inlet. A useful test is trying a different inlet on the same system: if the unit starts fine from another valve but not this one, the fault sits at this switch rather than in the motor or wiring back to the unit.\u003c\/p\u003e\u003cp\u003eCorrosion on the contacts, a contact bent by a hose end pushed in crooked, or plain wear after thousands of insertions over the years are the usual causes. None of it involves line voltage, since this circuit runs on low-voltage current between the inlet and the power unit rather than household wiring.\u003c\/p\u003e\u003cp\u003eBefore ordering, make sure your inlets belong to the HS5000 series. The trim hardware, including this switch, is matched to that valve line, so check the valve body or the paperwork from the install if you are unsure which series is in your walls.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS5000V-S switch kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide-A-Hose HS5000 series valves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e closes the low-voltage circuit that starts the power unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom it fixes:\u003c\/strong\u003e one inlet stays silent while others on the same system start normally\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182806266,"sku":"HS5000V-S","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS5000V-S.jpg?v=1785157162"},{"product_id":"valve-trim-kit-white-new-style-hide-a-hose-hs5000-hs5000w","title":"Hide A Hose Trim Kit - HS5000 New Style, White","description":"\u003cp\u003eWhite is the finish most 5000 series inlets go in with, and HS5000W is that kit: the inlet valve, the full finish inlet door, a low voltage switch, four screws, and two wire nuts, packaged together as a complete wall inlet.\u003c\/p\u003e\u003cp\u003eCalling it a trim kit undersells what is in the box. The valve is the part that holds the retractable hose inside the wall, releases it when you pull, and takes it back once the central vacuum's suction does the retracting, so the door seal and the locking mechanism are working components that wear.\u003c\/p\u003e\u003cp\u003eThe 5000 generation reworked exactly those points. The body came down roughly 38 percent in size against the earlier valves, the rubber door seal was improved, and the hose locking system now uses a simple on and off switch. It adjusts to wall thicknesses up to one and a half inches.\u003c\/p\u003e\u003cp\u003eCheck which series your home actually has before ordering. An HS4000 inlet and a 6000 PRO inlet each take their own trim, and a kit bought for the wrong series will not go in without also changing what sits behind the wall. A mismatch shows itself immediately during installation, as mounting points that do not line up, so hold the new inlet to the opening before the old one comes off entirely and you are left with a hole in the wall and nothing to close it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS5000W valve trim kit, new style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide-A-Hose HS5000 series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e inlet valve, full finish inlet door, low voltage switch, four screws, two wire nuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e white\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182937338,"sku":"HS5000W","price":187.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS5000W_48a180bc-42b6-4b7b-810c-c14acb91a7a7.jpg?v=1785157214"},{"product_id":"valve-door-white-hide-a-hose-hs5000w-d","title":"Hide A Hose Valve Door - White-hide a Hose","description":"\u003cp\u003eWhite door for Hide-A-Hose HS5000 series inlet valves, ordered as HS5000W-D. White is the common trim color, which also makes it the one most often replaced: a chipped or yellowed door stands out against a painted wall in a way an almond or black one never does.\u003c\/p\u003e\u003cp\u003eThe door does a job as well as sitting there looking tidy. It closes the inlet when the hose is out, and every unused inlet in a central vacuum has to be shut for the system to develop full suction. A snapped hinge or a catch that no longer holds turns that inlet into an air leak, and the loss shows up as weak pull at whichever inlet you happen to be working from.\u003c\/p\u003e\u003cp\u003eTake the number off your existing door or valve trim before ordering. The HS5000 door is not the same as the HS4000 door, and the two are easy to confuse at a glance.\u003c\/p\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457182970106,"sku":"HS5000W-D","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS5000W-D.jpg?v=1785152111"},{"product_id":"hose-30-ft-with-smartsoc-hide-a-hose-hs500103p","title":"Hide A Hose 30 ft Hose with SmartSoc","description":"\u003cp\u003ePart HS500103P pairs a 30 foot Hide-A-Hose retractable hose with a SmartSoc sleeve already fitted, the fabric layer that keeps the corrugated hose from scraping the wall pipework as it travels in and out.\u003c\/p\u003e\u003cp\u003eA 30 foot run typically covers a single-story home, an apartment, or a small addition where anything longer would just be dead weight to haul from room to room. Eventually every hose in this system reaches a point of failure, whether that is a cuff cracking, a rib splitting open, or the sock wearing through until the assembly starts catching on its way back into the wall; whichever shows up first, expect noticeably weaker pickup and more resistance sliding the hose. Catching either symptom while it is still mild, rather than after the hose stops retracting altogether, keeps the fix to a straightforward swap rather than an emergency one.\u003c\/p\u003e\u003cp\u003eBuying hose and sock together avoids one common mismatch: fitting a new hose inside a sleeve that is already partway through its own service life, which would leave you troubleshooting a fresh problem within a year or two of an otherwise good repair.\u003c\/p\u003e\u003cp\u003eChoose this length to match what your installer originally piped behind the wall, since a mismatched length simply will not seat or draw back in properly no matter how new it is.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS500103P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 30 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature:\u003c\/strong\u003e SmartSoc sleeve fitted for smooth retraction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e reduced suction or a hose that resists sliding in or out\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457183035642,"sku":"HS500103P","price":122.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS500103P_07062785-d950-4b47-8bcd-5101a8be3028.jpg?v=1785138455"},{"product_id":"hose-40-ft-with-smartsoc-hide-a-hose-hs500104p","title":"Hide A Hose 40 ft Hose with SmartSoc","description":"\u003cp\u003eForty feet of Hide A Hose retractable hose ships here as part HS500104P with the SmartSoc sock already on it and a mini cuff fitted at the tool end. The sock rides between the hose and everything it touches, protecting millwork and furniture on the way out and the wall tubing on the way back in.\u003c\/p\u003e\u003cp\u003eThe mini cuff is the half of the specification that matters most day to day. Attachments from the Hide A Hose tool kits push straight onto the cuff, with no coupler to hunt down and no adapter step between the hose and the tool. On a SmartSoc hose that cuff is the black 1-1\/4 inch HS5000H4.\u003c\/p\u003e\u003cp\u003eBecause the sock is pre-installed rather than added later, the hose can be washed with the sock left on. That is the practical difference between this and buying a bare hose and a sock kit and marrying the two yourself.\u003c\/p\u003e\u003cp\u003eMatch the length to the hose your system was installed with rather than to the size of the room it serves, since the tubing run and the valve position were sized together when the system went in. Where the length marking on the hose is no longer readable, the original installation paperwork usually records it, and that is a safer source than measuring a hose that has stretched with age.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS500104P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 40 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSock:\u003c\/strong\u003e SmartSoc, pre-installed, washable in place\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuff:\u003c\/strong\u003e mini cuff, black 1-1\/4 inch, tools connect directly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide A Hose retractable central vacuum systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457183101178,"sku":"HS500104P","price":147.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS500104P_cf000f33-2c48-4e6e-9404-160108d6b137.jpg?v=1785144918"},{"product_id":"hose-50-ft-with-smartsoc-hide-a-hose-hs500105p","title":"Hide A Hose 50 ft Hose with SmartSoc","description":"\u003cp\u003ePart HS500105P covers the 50 foot length in the SmartSoc line, a Hide A Hose retractable hose supplied with its sock already fitted and a mini cuff on the end. Fifty feet reaches further from one inlet than the shorter options, which matters in homes with fewer valve locations covering more floor each.\u003c\/p\u003e\u003cp\u003eThe sock is the reason these hoses survive being pulled through wall tubing thousands of times. It sits between the hose and the pipe, and between the hose and whatever furniture or trim it passes on the way to the room, so neither takes the abrasion directly. Socks wear fastest where they flex most, so look for thinning or fraying at those points rather than along the straight sections.\u003c\/p\u003e\u003cp\u003eTools connect straight onto the mini cuff at the end, without a coupler in between, and the whole hose can go in the wash with the sock still on it rather than being stripped down first.\u003c\/p\u003e\u003cp\u003eOrder by the length already installed. Systems are laid out with the tubing run and the valve position sized to a specific hose, so a length chosen by room size instead will not seat and retract the way the install intended. A hose that has started resisting on the way back in is usually reporting a worn sock rather than a worn hose.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS500105P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSock:\u003c\/strong\u003e SmartSoc, pre-installed, washable with the hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuff:\u003c\/strong\u003e mini cuff, tools push on directly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide A Hose retractable central vacuum systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457183199482,"sku":"HS500105P","price":186.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS500105P.jpg?v=1785144676"},{"product_id":"hose-60-ft-with-smartsoc-hide-a-hose-hs500106p","title":"Hide A Hose 60 ft Hose with SmartSoc","description":"\u003cp\u003eSixty feet is the longest of the common Hide-A-Hose lengths, and part HS500106P supplies it with a SmartSoc sleeve fitted in advance, so the hose arrives ready to feed into the pipe rather than waiting on a sock to be pulled over it first.\u003c\/p\u003e\u003cp\u003eRuns this long exist because the system was planned around fewer openings: one valve reaching an entire floor, or a house deliberately piped with a handful of drops instead of one in every room. The trade is that more of the hose lives inside the wall, where wear stays invisible until performance falls off. A pinhole in the hose or a thin patch in the sleeve reads the same way at the handle no matter where along the sixty feet it sits, as suction that has quietly weakened with nothing visible to point at.\u003c\/p\u003e\u003cp\u003eMatch the replacement to the length your installer piped rather than to the floor area you want to reach, because a hose that is wrong for the run will not draw back in correctly however well the rest of the system was built. Fitting hose and sleeve together also keeps the two wearing at the same rate, instead of putting a new hose inside a sock that has already made years of trips through the pipe.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS500106P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 60 ft, the longest standard run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied with:\u003c\/strong\u003e SmartSoc sleeve already fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e handle suction has fallen off or the hose drags on its way back into the wall\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457183232250,"sku":"HS500106P","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS500106P_14a30eb2-9e09-43e7-8ccc-622792f7ce9d.jpg?v=1785151522"},{"product_id":"o-ring-10-pack-hide-a-hose-new-style-hose-cuff-hs500122","title":"Hide A Hose O-Ring 10-Pack - New Style Hose Cuff","description":"\u003cp\u003eTen o-rings ship as part HS500122, cut from 218 duro 70 Buna-N nitrile and sized for the Hide A Hose mini cuff. They fit either cuff in the current lineup, the black 1-1\/4 inch HS5000H4 used on SmartSoc hoses or the blue 1-3\/8 inch HS5000H5 used on Rapid Flex.\u003c\/p\u003e\u003cp\u003eTheir job is friction rather than sealing. One or two rings sit on the cuff and give the valve door something to grip as it closes against the hose end, so the hose holds where it was left instead of creeping. Hide A Hose treats them as optional, added when a door closes loosely on a cuff.\u003c\/p\u003e\u003cp\u003eRubber hardens and flattens with age, and a ring that has gone stiff stops doing that job while still looking intact from the outside. A hose that slips at the valve, or a door that closes with noticeably less resistance than it used to, is the usual sign that the rings have had their day.\u003c\/p\u003e\u003cp\u003eTen in a pack covers every cuff in a house with spares left over. Fit them one at a time and stop at two per cuff, since more than that changes how the door meets the hose end. Have the cuff off the hose when you fit them, because rolling a ring onto a cuff that is still screwed into the hose tends to twist it out of shape.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS500122, ten o-rings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 218 duro 70 Buna-N nitrile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide A Hose mini cuffs HS5000H4 and HS5000H5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e adds friction where the valve door closes on the cuff\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e one or two rings per cuff\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457183297786,"sku":"HS500122","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS500122_29754056-d65d-4527-9e0a-03ae5eab54a0.jpg?v=1785153890"},{"product_id":"mini-cuff-with-o-ring-kit-blue-1-38-hide-a-hose-no-sock-hoses-hs500123","title":"Mini Cuff with O-Ring Kit Blue 1-3\/8 - Hide A Hose (No Sock Hoses)","description":"\u003cp\u003eThis \u003cstrong\u003emini cuff with O-ring kit\u003c\/strong\u003e in blue fits Hide A Hose 1-3\/8 inch no-sock hoses. The cuff finishes the hose end and, with its O-ring, forms the sealed, secure connection the hose makes to the valve or wand.\u003c\/p\u003e\u003cp\u003eA cracked cuff or a worn O-ring lets the connection leak air or work loose, which costs suction and makes the hose awkward to seat. Fitting a fresh cuff and O-ring restores a tight, dependable coupling at the hose end.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide A Hose 1-3\/8 inch no-sock hoses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e mini cuff with O-ring kit #HS500123, blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e seals and secures the hose-end connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e seat the O-ring cleanly so the joint holds full suction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe cuff assembles onto the hose end with basic hand tools. Confirm your hose is the 1-3\/8 inch no-sock style before ordering so the cuff and O-ring fit and seal correctly.\u003c\/p\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457183330554,"sku":"HS500123","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS500123_fee3e81b-a52c-4d19-8651-7092cc1ae53b.jpg?v=1785153686"},{"product_id":"hose-sock-50-ft-hide-a-hose-hs502105","title":"Hide A Hose Sock - 50 ft Replacement Sleeve","description":"\u003cp\u003eFifty feet of replacement sock, part HS502105, sold on its own for the hose in a Hide-A-Hose system. It is the fabric layer riding on the outside of that hose, letting it travel in and out of the wall pipework instead of scraping directly against the tube walls.\u003c\/p\u003e\u003cp\u003eA sock takes the abuse the hose itself is spared from, and it shows wear well before the hose underneath does. Look for thin patches, a frayed edge, or fabric bunching up somewhere along its length, since any of those can snag inside the pipe and stop a retraction partway, leaving a stretch of hose hanging out at the valve where it should have disappeared into the wall. A pull that suddenly needs more force than usual, in either direction, is often the sock catching rather than the hose itself resisting.\u003c\/p\u003e\u003cp\u003eBefore ordering, pull the worn sock free and run your fingers over the bare hose underneath. A hose that still bends smoothly and shows no splits or soft spots along its length is one you can keep using once it gets a new cover, a cheaper repair than swapping the entire hose assembly.\u003c\/p\u003e\u003cp\u003eOrder this sock sized to the hose it will cover, not to the length of pipe behind the wall, and take a tape measure to your old cover first if its length is not marked anywhere.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS502105\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide-A-Hose retractable hose (matching length)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e hose that resists sliding in or stalls partway through retraction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457183396090,"sku":"HS502105","price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS502105.jpg?v=1785139687"},{"product_id":"hose-sock-kit-hide-a-hose-60-ft-hs502106","title":"Hide A Hose Hose Sock Kit, 60 ft","description":"\u003cp\u003eHide A Hose sells the sock on its own, and part HS502106 is the 60 foot replacement. The kit arrives as three pieces: the sock itself, a cardboard tube, and a sock installation guide ring. The sock is not pre-fitted to the tube, so the kit is assembled at install time.\u003c\/p\u003e\u003cp\u003eThe sock is a soft durable fabric sleeve that sits snug on the hose. It reduces recoiling and kinking, shields the hose from the tubing it retracts through, and keeps furniture and millwork clear of bare hose on the way past. It is removable and machine washable, which is the whole reason for replacing a sock rather than a hose.\u003c\/p\u003e\u003cp\u003eOrder by the length of the hose you own. A 60 foot sock on a shorter hose bunches and binds at the valve, and Hide A Hose lists separate part numbers for the 30, 40 and 50 foot hoses precisely so the sock matches the run.\u003c\/p\u003e\u003cp\u003eReplace a sock when it has frayed through, thinned at the points where it flexes most, or when retraction has grown uneven and the hose no longer travels smoothly for its full length. Fitting a fresh sock is also the moment to look over the hose underneath it for splits, since it will not be this accessible again for years.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS502106\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e sized for a 60 ft Hide A Hose hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit contents:\u003c\/strong\u003e hose sock, cardboard tube, sock installation guide ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e soft durable fabric, removable and machine washable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e reduces recoiling and kinking, protects hose, furniture and home\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457183494394,"sku":"HS502106","price":113.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS502106_987e31af-f098-4fec-9389-f539d57c1e0f.jpg?v=1785138483"},{"product_id":"adapter-threaded-1-14-hide-a-hose-hs502117","title":"Adapter - Threaded 1-1\/4 - Hide A Hose","description":"\u003cp\u003eThis \u003cstrong\u003ethreaded adapter\u003c\/strong\u003e in the 1-1\/4 inch size connects Hide A Hose central vacuum components with a secure, airtight fit. It bridges a threaded fitting to the mating part so suction passes through the joint without leaking.\u003c\/p\u003e\u003cp\u003eThe wrong or worn adapter leaves a gap that bleeds off air, and lost suction at a connection shows up as weaker pickup at the tool. The correct 1-1\/4 inch adapter seals the joint so the system holds its airflow.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide A Hose central vacuum systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e threaded adapter #HS502117, 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e airtight threaded connection between components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e hand-start the threads to avoid cross-threading the fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe adapter threads on without special tools. Confirm the 1-1\/4 inch size and your Hide A Hose configuration before ordering so the connection seats tight and leak-free.\u003c\/p\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457183527162,"sku":"HS502117","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS502117.jpg?v=1785141955"},{"product_id":"adapter-1-14-hose-to-tool-hide-a-hose-hs502118","title":"Hide A Hose 1-1\/4 Inch Hose to Tool Adapter","description":"\u003cp\u003ePart HS502118 joins a 1 1\/4 inch Hide-A-Hose hose end to a standard tool fitting, so ordinary vacuum attachments can be used on a hose that would otherwise only take the manufacturer's own tools. It fits Hide-A-Hose central vacuum hoses that terminate in a 1 1\/4 inch cuff, and it is molded to that one diameter rather than sized to fit several.\u003c\/p\u003e\u003cp\u003eThese adapters go missing more often than they wear out. Left attached to whatever tool was put down last, one can vanish into a closet or a garage shelf long before the plastic itself gives out. When damage does happen, it is almost always a split along the sleeve, the result of a tool being twisted off at an angle instead of pulled straight. A split sleeve draws in air at the joint instead of at the nozzle, so a dusting brush loses its pull and a crevice tool barely grabs anything even while the power unit still sounds like it is working hard.\u003c\/p\u003e\u003cp\u003eMeasure the hose end before ordering. Central vacuum systems run more than one hose diameter, and an adapter sized for the wrong one will not seat properly, so confirm 1 1\/4 inch against your own hose before checkout.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS502118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide-A-Hose central vacuum hoses with a 1 1\/4 inch end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e lets standard vacuum tools attach to a 1 1\/4 inch Hide-A-Hose cuff\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the sleeve is split or the original adapter has gone missing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457183592698,"sku":"HS502118","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS502118_37bb7427-a91d-4030-b114-e098593bee7f.jpg?v=1785155744"},{"product_id":"metal-telescopic-wand-with-comfort-seal-hide-a-hose-hs502130","title":"Metal Telescopic Wand with Comfort Seal - Hide A Hose","description":"\u003cp\u003eThis \u003cstrong\u003emetal telescopic wand\u003c\/strong\u003e for Hide A Hose is a stainless steel wand with a button lock and a Comfort Seal connection for simple, secure attachment to any Hide A Hose handle. It extends from about 25 inches to 38 inches in one-inch steps to suit different users and tasks.\u003c\/p\u003e\u003cp\u003eA wand that will not hold its length or connects loosely makes floor and above-floor cleaning awkward and can drop the tool mid-job. This telescoping wand locks at each setting and seals firmly at the handle for steady, comfortable reach.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e any Hide A Hose handle via the Comfort Seal connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e stainless steel telescopic wand #HS502130\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e adjustable extension between handle and floor tools\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e extends 25 to 38 inches at one-inch intervals\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe wand attaches with the button lock and Comfort Seal, no tools required. Adjust the length to a comfortable height, and confirm the Comfort Seal fitment with your handle before ordering.\u003c\/p\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457183658234,"sku":"HS502130","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS502130.jpg?v=1785155146"},{"product_id":"coupler-ready-grip-hide-a-hose-hs502190","title":"Hide A Hose Ready Grip Coupler","description":"\u003cp\u003eHS502190 is the coupler that joins a Hide-A-Hose mini cuff hose to a Ready Grip handle. Its usual job is bridging generations: if you have replaced a hose with the newer mini cuff style but kept an older handle, this is the adapter that lets the two work together instead of buying a whole new handle.\u003c\/p\u003e\u003cp\u003eIt is a glued fitting rather than a mechanical catch. Depending on how your parts sit, it cements onto the handle or onto the mini cuff, so decide which side it belongs on and dry-fit the whole assembly before any cement comes out of the tube. A coupler glued to the wrong piece is not a decision you get to revisit.\u003c\/p\u003e\u003cp\u003eThe joint where a flexible hose meets a rigid handle takes constant twisting, since every pull and turn of the hose puts torque through that one point. Over time the plastic can craze or crack at the mating face, and a cracked coupler admits air right at the handle. That reads as suction falling away at the grip while the rest of the hose still pulls normally.\u003c\/p\u003e\u003cp\u003eBefore ordering, look at the cuff on your hose and the fitting on your handle and note which style each one is. That pairing, rather than the model of your system, is what decides whether this coupler is the piece you need.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HS502190\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e connects a Hide-A-Hose mini cuff hose to a Ready Grip handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical use:\u003c\/strong\u003e joining a newer mini cuff hose to an older style handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e glued to either the handle or the cuff, so dry-fit first\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457183822074,"sku":"HS502190","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS502190_f382a855-3161-4851-9ad2-faaa5e180f79.jpg?v=1785150181"},{"product_id":"stand-alone-mounting-box-6000-pro-hide-a-hose-carbon-hs600050c","title":"Hide-A-Hose 6000 Pro Stand-Alone Mounting Box - Carbon","description":"\u003cp\u003eFinished in carbon, this \u003cstrong\u003estand-alone mounting box\u003c\/strong\u003e lets the Hide A Hose 6000 PRO valve mount directly to a wall surface rather than inside the wall cavity. It suits garages, workshops, and commercial spaces where standard in-wall installation is not practical.\u003c\/p\u003e\u003cp\u003eSome locations have no open wall to rough into, which leaves the valve without a mounting point. This box provides that surface-mount anchor for the 6000 PRO valve, so you can add a Hide A Hose inlet where in-wall work is impossible.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hide A Hose 6000 PRO valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e stand-alone mounting box #HS600050C, carbon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e surface-mount housing for the valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e not required for standard within-wall installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFasten the box to the wall surface and mount the 6000 PRO valve inside it. Confirm you have the 6000 PRO valve before ordering, since this box is matched to that valve for versatile surface-mount setups.\u003c\/p\u003e","brand":"Hide A Hose","offers":[{"title":"Default Title","offer_id":48457183887610,"sku":"HS600050C","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HS600050C_1f0fa8b0-e43d-478b-844c-a770e86050a7.jpg?v=1785158013"}],"url":"https:\/\/evacuumsandmore.com\/collections\/hide-a-hose.oembed?page=6","provider":"Vacuums and More","version":"1.0","type":"link"}