{"title":"Oreck","description":"\u003cp\u003e\u003cstrong\u003eOreck - The Original Lightweight Upright\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOreck revolutionized home cleaning with vacuums that weigh as little as 8 pounds yet deliver commercial-grade suction. Since 1963, Oreck has focused on making vacuums that are easy to use without sacrificing power.\u003c\/p\u003e\u003cp\u003eAs an authorized Oreck dealer, we carry the full lineup of Oreck vacuums, bags, filters, and genuine replacement parts. Every Oreck we sell comes with expert setup, service center backing, and free shipping on orders $100+.\u003c\/p\u003e","products":[{"product_id":"oreck-hepa-bagged-upright-cordless-electric-vacuum-cleaner","title":"Oreck Elevate Cordless Electric Vacuum Cleaner","description":"\u003cp\u003eThe \u003cstrong\u003eOreck Elevate Cordless\u003c\/strong\u003e is a bagged upright electric vacuum built for quick, everyday floor care. It runs on a rechargeable battery, so you can move room to room without hunting for an outlet or dragging a cord behind you.\u003c\/p\u003e\n\u003c!-- bundle:free-bags --\u003e\n\u003cp\u003eWe send two free packages of bags along with the Elevate Cordless — the disposables this model is built around, matched to the machine rather than guessed at. A cordless upright gets picked up for small messes far more often than a corded one, which is precisely why spares matter here.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eIncluded free:\u003c\/strong\u003e two packages of the sealed HEPA disposable bags this model uses\u003c\/li\u003e\u003c\/ul\u003e\n\u003c!-- \/bundle:free-bags --\u003e\n\u003cp\u003eA cordless upright earns its place when daily pickups need to happen fast and without setup. The Elevate keeps that routine simple with a lightweight body that steers easily around furniture, while its sealed HEPA bag system captures fine dust as you clean rather than recirculating it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Cordless bagged upright vacuum, Oreck Elevate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Battery-powered daily cleaning across carpet and bare floors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e Lightweight, cord-free maneuverability for busy households\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e Sealed HEPA bagged system for cleaner dust containment\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCharge the battery, fit a fresh bag, and it is ready for daily use. As a factory-authorized Oreck dealer, we back every Elevate with the full manufacturer warranty.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":45179874607354,"sku":"BK95520PC","price":499.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/BatteryUpright-2815025418.jpg?v=1739089721"},{"product_id":"oreck-compact-handheld-vacuum-bb1200","title":"Oreck Compact Handheld Vacuum, BB1200","description":"\u003cp\u003eThe Oreck BB1200 is a compact canister vacuum light enough to carry in one hand, built around a bag rather than a bagless bin. That single choice changes how it behaves at the moment that matters most: when you finish a job and go to empty it. A bagless compact vacuum dumps loose dust back into the air right as you tip it into the trash, while the BB1200 seals what it picked up inside a liner you pull out and toss without a cloud following it.\u003c\/p\u003e\u003cp\u003eIts size is the other half of the appeal. A vacuum this light stays within reach on a shelf or in a closet instead of getting buried behind a full-size vacuum, which is usually the difference between a tool that gets used for quick pickups and one that sits untouched until the next scheduled cleaning day. Upholstery, stairs, car interiors, and the crumbs a stick vacuum cannot quite reach under a table are its natural jobs.\u003c\/p\u003e\u003cp\u003eHouseholds that keep a compact vacuum like this near the kitchen or by the back door tend to use it far more often than the ones that store it in a hall closet, simply because reaching for it takes no extra effort. That habit is what actually keeps small messes from turning into a bigger cleaning job later.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Oreck BB1200 compact canister, small enough to use like a handheld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollection:\u003c\/strong\u003e bagged, not bagless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e upholstery, stairs, vehicle interiors, and quick spot pickups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling:\u003c\/strong\u003e light enough to keep on a shelf for grab-and-go pickups\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eVacuums and More sells the BB1200 as an authorized Oreck dealer, backed by decades of hands-on Oreck experience.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":46246675906810,"sku":"","price":219.99,"currency_code":"USD","in_stock":false}]},{"product_id":"oreck-commercial-leed-compliant-upright","title":"Oreck Commercial LEED-Compliant Upright","description":"\u003cp\u003eBuilt to meet LEED criteria, the Oreck Commercial upright is a bagged machine for facilities that clean to the green building standard a growing number of property managers and cleaning contractors now work under once a building is certified or pursuing certification.\u003c\/p\u003e\u003cp\u003eBagged design is part of what makes a commercial upright suitable for LEED work in the first place. Sealing dust inside a disposable bag rather than a reusable bin keeps it from re-entering the air during emptying, which matters directly to the indoor air quality criteria that LEED tracking looks at. For a crew vacuuming the same building night after night, that also means less dust handling and fewer interruptions during a shift.\u003c\/p\u003e\u003cp\u003eWe do not currently have a manufacturer spec sheet loaded for this specific SKU, so exact motor, filtration and capacity figures are not listed here. If those numbers matter to a certification submission or a bid, our team can pull the current Oreck documentation before you order. Facility teams working toward or maintaining LEED certification typically need documented equipment specifications on file, not just a working machine, so keep the paperwork we send alongside this order with the rest of your building's cleaning equipment records.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e bagged commercial-duty upright vacuum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification fit:\u003c\/strong\u003e facilities pursuing or holding LEED status\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits into:\u003c\/strong\u003e commercial cleaning programs, contract crews, property management fleets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold by:\u003c\/strong\u003e Vacuums and More, an authorized Oreck dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eReach out before ordering if you need the full spec sheet or LEED documentation for a certification file, and we can get it to you directly.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":46246715916538,"sku":"","price":362.98,"currency_code":"USD","in_stock":false}]},{"product_id":"oreck-elevate-conquer","title":"Oreck Elevate Conquer","description":"\u003cp\u003eThe Oreck Conquer, model UK30300PC, sits at the top of Oreck's current bagged upright family, keeping the light, easy-push feel the brand is known for while carrying the most complete feature set in the line.\u003c\/p\u003e\u003cp\u003eThe published specifications are worth spelling out. A 2-speed brush roll lets the machine ease off for rugs and hard surfaces and dig in on carpet. SlimSwivel steering turns the low-profile head around furniture legs without wrestling, and five LED headlights pick out dust and debris hiding under beds and along baseboards. The 35-foot cord covers most of a floor from a single outlet, and the filtration system captures at least 99.97 percent of fine particles per Oreck's published figure, keeping what the bag collects sealed away from room air until the bag is changed.\u003c\/p\u003e\u003cp\u003eThat combination points the Conquer at larger homes, households with pets or allergies, and anyone who wants one upright to handle carpet, hardwood and tile without swapping machines. As an authorized Oreck dealer, our team can confirm current bag capacity and warranty terms before you buy, since those details shift between production runs, and we would rather quote current numbers than a stale spec sheet.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e UK30300PC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e bagged upright vacuum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrush roll:\u003c\/strong\u003e 2-speed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering:\u003c\/strong\u003e SlimSwivel with low-profile head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCord:\u003c\/strong\u003e 35 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLights:\u003c\/strong\u003e 5 LED headlights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e captures at least 99.97 percent of fine particles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold by:\u003c\/strong\u003e Vacuums and More, an authorized Oreck dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCall or message us before ordering if you want the full current data sheet, and we will pull it directly from Oreck rather than guessing.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":46246753468666,"sku":"","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/elevate-conquer-uk30300pc-1_1200x1200-2634850200.jpg?v=1739088755"},{"product_id":"back-motor-mount-oreck-buster-b-010-7455","title":"Back Motor Mount - Oreck Buster B","description":"\u003cp\u003eThe back motor mount from the Oreck Buster B, part 010-7455. It cradles the rear of the motor inside the housing and holds it seated and aligned.\u003c\/p\u003e\u003cp\u003eMounts fail with heat and age rather than wearing out mechanically. As the old one hardens and splits, the motor is free to move a little in its seat, and you hear it: a machine that has turned noisy and buzzy for no visible reason, with vibration you can feel through the body. Run like that, the motor works against its own wiring and against the mount at the other end.\u003c\/p\u003e\u003cp\u003eA fresh mount holds the motor still again and takes a surprising amount of noise out of the machine. Check the front mount while you are inside, since the two are the same age. Confirm the part against your Buster B before installing.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456267792634,"sku":"010-7455","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/010-7455_411199af-2e6a-438b-9f63-8121e000e2dc.jpg?v=1785141635"},{"product_id":"brush-roll-seal-and-eyelet-assembly-oreck-xl8300100c-015-7728","title":"Brush Roll Seal and Eyelet Assembly - Oreck XL8300\/100C","description":"\u003cp\u003eOreck's brush roll rides on a seal and eyelet at each end of the roller, and that pairing does two jobs at once: it keeps the roller sitting true in the nozzle, and it keeps hair and grit out of the bearing behind it. Part 015-7728 is the genuine Oreck seal and eyelet assembly for the XL8300 and 100C uprights, and it is also listed for the Oreck 3640.\u003c\/p\u003e\u003cp\u003eHardened, flattened seals are easy to spot once the end cap is off. The brush roll shifts sideways, hair winds itself onto the exposed shaft, the belt starts running off-center, and the machine gets louder while grooming the carpet unevenly.\u003c\/p\u003e\u003cp\u003eFitting a fresh seal and eyelet puts the roller back on its intended axis, which quiets the nozzle and returns even agitation across the full brush width. Clear any wrapped hair from the shaft and look at the belt while you are in there.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456269299962,"sku":"015-7728","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/015-7728_95470266-9645-41e8-8081-62fec71113db.jpg?v=1785142229"},{"product_id":"oreck-fan-upright-nut-03-00448-01","title":"Oreck Fan Nut - 1\/4 x 32, Yellow Chrome, Left-Hand Thread","description":"\u003cp\u003eThe fan on an Oreck upright is held to the motor shaft by a single nut, and because the shaft turns one way, the nut is threaded the other. Left-hand thread, 1\/4 x 32, yellow chrome finish. Part 03-00448-01 is that nut, also catalogued as 880-5037.\u003c\/p\u003e\u003cp\u003eIt matters more than its size suggests. A nut that has been rounded off, stripped or corroded will not clamp the fan properly, and a fan even slightly loose on the shaft wobbles, rattles, chews at the hub and bleeds suction. It is also the part most often destroyed by someone turning it the wrong way during a fan swap.\u003c\/p\u003e\u003cp\u003eIt fits the many Oreck uprights that take type CC bags, including the 100C, 9100C, 9200, 9300, 9400, the U2000EB and U2000RB-1, the 4070H2L through 4120H2R range, the 4490HH and the UK30270.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456276443386,"sku":"03-00448-01","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/03-00448-01.jpg?v=1785150270"},{"product_id":"cord-clip-oreck-xl-888100c8300-03-00449-01m","title":"Oreck Cord Clip - XL 888, 100C, 8300","description":"\u003cp\u003eA cord clip for the Oreck XL 888, 100C and 8300, part 03-00449-01M. It is the small plastic fitting on the machine body that holds the power cord in a wrap when the vacuum is not in use, not the cord itself.\u003c\/p\u003e\u003cp\u003ePlastic clips like this one crack or snap off with age and repeated use, usually right at the point where the cord is pulled tight against it during wrapping. Once it breaks, the cord no longer has anywhere to catch, so it unravels and trails on the floor as you move the machine around, which is both a tripping hazard and a good way to put extra strain on the cord itself where it enters the housing. A clip that is only cracked but not fully broken off is worth replacing before it fails completely, since the cord tugging against a weak spot repeatedly is what finishes the job.\u003c\/p\u003e\u003cp\u003eIt is a simple snap-in replacement rather than anything requiring tools, and matching it to your specific Oreck XL model matters, since Oreck used a few different clip shapes across its XL line over the years. Wrap the cord the same way each time once the new clip is installed, since an inconsistent wrap puts uneven strain on the clip and shortens its life, and avoid wrapping the cord so tightly that it kinks at the point where it meets the clip.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 03-00449-01M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck XL 888, 100C, 8300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Holds the power cord in its wrap for storage\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456276541690,"sku":"03-00449-01M","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/03-00449-01M_873db895-cb6d-47fb-b6ad-6f728a9b88ec.jpg?v=1785152800"},{"product_id":"wheel-pin-oreck-xl-upright-03-00474-01","title":"Wheel Pin - Oreck XL Upright","description":"\u003cp\u003eThis replacement \u003cstrong\u003ewheel pin\u003c\/strong\u003e for the Oreck XL upright secures a wheel to its mount, fitting Oreck 00474 models. The pin acts as the axle the wheel turns on, holding it in position as the vacuum rolls.\u003c\/p\u003e\n\u003cp\u003eA worn or missing wheel pin lets the wheel wobble, bind, or fall away, which causes dragging, uneven rolling, and possible scuffing of the floor. Fitting a correct pin returns the wheel to a stable, smooth-rolling position so the machine glides easily over the surface.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck XL upright, model 00474\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e serves as the axle pin that retains the wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e restores smooth, stable rolling and protects floors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e inspect the wheel and mount for wear while the pin is out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe pin presses into place with basic tools for a direct fit. As an authorized Oreck dealer, we back this part with the full manufacturer warranty. Verify your model before ordering.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456276639994,"sku":"03-00474-01","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/03-00474-01.jpg?v=1785157385"},{"product_id":"oreck-front-wheel-axle-xl21-600-upright-03-00583-01","title":"Oreck Front Wheel Axle - XL21-600 Upright","description":"\u003cp\u003eThis genuine OEM Oreck \u003cstrong\u003efront wheel axle\u003c\/strong\u003e supports the front wheel on the XL21-600 and a wide range of Oreck uprights. The axle carries the wheel and lets it roll freely as you guide the vacuum across the floor.\u003c\/p\u003e\n\u003cp\u003eA bent or worn axle makes the front wheel drag, bind, or sit crooked, which strains steering and can mark flooring. A straight replacement axle restores easy, effortless movement and keeps the wheel tracking true.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck U7000ECB, U7000ECP, U7000ECR, U7005ECB, U7010ECS, U7020ECBS, U7030ECBS, U7050ECB, U7060ECS, U7070ECS, U7200ECB, U7210ECB, U7210ECR, U7211ECB, U7211ECG, U7211ECP, U7211ECR, U7212ECB, U7220ECS, U7230ECS, U7240ECS, U7241ECS, U7250ECS, U7300ECB, U7330ECBS, XL21600ECB, XL21600ECC, XL21700ECC, XL21700ECP, XL21700ECT, XL21750ECB, XL21750ECT, XL21780EYB, XL21780EYM, XL7605EYB, XL7705ECB, XL7705ECTPK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e axle that supports and turns the front wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e smooth, effortless maneuvering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe axle installs as a direct-fit replacement. As an authorized Oreck dealer, we back it with the full manufacturer warranty. Confirm your model before ordering.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456276803834,"sku":"03-00583-01","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/03-00583-01_79ef2339-dcb1-4a26-966f-106ce98eb9ed.jpg?v=1785148157"},{"product_id":"oreck-cord-protector-xl2320-upright-03-00600-01","title":"Oreck Cord Protector - XL \/ U Series Upright","description":"\u003cp\u003eThe power cord on an Oreck XL or U-series upright passes through a molded protector where it meets the machine, and that small piece is what keeps years of bending from ever reaching the wires inside the cord itself. Part 03-00600-01 replaces that fitting.\u003c\/p\u003e\n\u003cp\u003eReclining the machine to vacuum and standing it back upright flexes the cord at that point on every single pass. Enough cycles eventually split the fitting or knock it loose, and once that happens the cord itself absorbs the sharp bend directly. The earliest symptom tends to be power that comes and goes depending on how the cord happens to sit. Wait past that point and the last symptom is bare copper showing at the bend, which is not something to keep running.\u003c\/p\u003e\n\u003cp\u003eInstalling the replacement is basic hand-tool work: free the old fitting, seat the new one in its place, and reassemble, following your model's parts diagram for the exact teardown. While things are apart, check the cord itself for nicks near the old fitting, since a damaged protector often means the cord underneath took some of that bending too.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 03-00600-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck U2000E, U2000E2, U2000EB, U2000H, U2000HH, U2160HH, U2250RS, U2510RH, U2640RH, U3120HH, U3620HH, U3700HH, U3720HG, U3760HH, U3770HH, U3772HHB, U3772HHG, U3772HHT, U3773FL, U3773GA, U3773LSU, U3773OSU, U3773TN, U3773TX, U3773TXAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e cord strain relief fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e intermittent power when the cord is flexed, or visible wear at the bend\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis protector spans a wide range of Oreck U-series machines built over several years, so check your model number before ordering to confirm the mounting matches your machine.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456276902138,"sku":"03-00600-01","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/03-00600-01.jpg?v=1785151763"},{"product_id":"nut-oreck-new-style-upright-bag-holder-03-00606-01","title":"Nut - Oreck New Style Upright Bag Holder","description":"\u003cp\u003eThis replacement \u003cstrong\u003enut\u003c\/strong\u003e secures the bag holder on Oreck new-style upright vacuums. It threads onto the bag holder mount and keeps the outer bag assembly clamped firmly in place.\u003c\/p\u003e\n\u003cp\u003eWhen this nut goes missing or its threads wear, the outer bag holder can loosen, letting the bag hang crooked or work free during use. Fitting a fresh nut draws the holder tight again so the bag sits secure and properly supported.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck new-style upright bag holders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e threaded nut that clamps the bag holder in place\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e keeps the outer bag secure and correctly positioned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e match the part number to your model before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe nut threads on by hand or with a light tool for a direct fit. As an authorized Oreck dealer, we supply this part with the full manufacturer warranty behind it. Confirm your model first.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456277623034,"sku":"03-00606-01","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/03-00606-01_afca0415-9932-424c-bbf5-8b3aebc8bdd0.jpg?v=1785156699"},{"product_id":"oreck-upright-all-models-belt-3-pack-030-0604","title":"Oreck Upright Flat Belt - All Models, 3 Pack","description":"\u003cp\u003eThis three-pack of flat belts, part 030-0604, covers Oreck XL upright vacuums. A drive belt is a wear item on any upright in regular use, and on a machine that runs daily it will come round again, which is the whole argument for buying three at once. Fit one today and the other two sit ready for the next two changes.\u003c\/p\u003e\u003cp\u003eOreck's XL uprights drive the brush roll straight off the motor pulley through a single flat belt, with no gearbox to absorb slack, so a stretched belt shows itself quickly. The roller loses speed as soon as it meets resistance instead of holding a constant pace, grooming turns uneven across a single pass, and a belt slipping hard puts off the burnt-rubber smell most vacuum owners already know on sight. Cracking on the inner face, the surface that rides the pulley, means the belt is close to failing even before it starts to slip.\u003c\/p\u003e\u003cp\u003eCoverage runs across the Oreck XL upright line, including the U2740RD and the U3620HH, U3700HH and U3770HH. Swapping one takes only a few minutes with the base plate removed, which is the entire reason to hold two spares rather than order belts one at a time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 030-0604, flat belt, 3 per pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck XL upright models, including U2740RD, U3620HH, U3700HH, U3770HH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e roller losing pace under load, uneven grooming, burnt-rubber smell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChange alongside:\u003c\/strong\u003e check both roller ends for wound hair while the plate is off\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456277917946,"sku":"030-0604","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/030-0604_607700fc-fcd7-4ec3-a72e-24a51a75b27b.jpg?v=1785154128"},{"product_id":"oreck-nipple-quick-connect-regina-800900-steamer-09-53058-01","title":"Oreck Regina Quick Connect Nipple - 800\/900 Steamer","description":"\u003cp\u003eThis is the quick connect nipple for the Regina 800 and 900 steamers, sold here as part 09-53058-01. The name describes the job it does: it is the fitting half of a coupling that goes together and comes apart by hand, with no wrench and no tools involved.\u003c\/p\u003e\u003cp\u003eA coupling like this one is a wear item for a simple reason. It is the single connection on the machine that gets made and broken over and over, while everything else stays put, so it absorbs handling that no other fitting sees. Wear announces itself at the joint rather than anywhere else: the connection will not stay together under load, moisture or hissing appears where the two halves meet, or the fitting has to be held or twisted a certain way to keep working. Once a coupling reaches that stage there is nothing to tighten or adjust back into place, and fitting a new one is the fix.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 09-53058-01, quick connect nipple\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck Regina 800 and 900 steamers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSign of wear:\u003c\/strong\u003e a joint that will not stay connected, leaks at the seam, or has to be held in position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore you order:\u003c\/strong\u003e compare the replacement against the fitting you are removing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm your machine is a Regina 800 or 900 steamer before ordering, and hold the old fitting next to the new one when it arrives, because couplings that look alike at arm's length can differ where it counts. Let the steamer cool completely and take it off power before you touch any fitting on it, then seat the replacement fully rather than stopping at the point where it first feels snug.\u003c\/p\u003e\u003cp\u003eVacuums and More is an authorized Oreck dealer with 35 years behind the counter, and we are glad to check this fitting against your machine before you order rather than after.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456284963066,"sku":"09-53058-01","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-53058-01.jpg?v=1785153310"},{"product_id":"oreck-motor-assembly-buster-b-old-style-kit-09-72158-01","title":"Oreck Motor Assembly Kit - Buster B Compact Canister","description":"\u003cp\u003eThis genuine Oreck motor assembly comes complete with adapter and leads for a ready-to-install solution. If your Buster B canister vacuum has lost suction, makes unusual noises, or will not run at all, the motor assembly is likely the cause.\u003c\/p\u003e\u003cp\u003eReplaces part #09-72158-01, 097215801, O-721-0802.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e Oreck: BB-870-AW (Type 1 \u0026amp; 2) Compact Canister\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456284995834,"sku":"09-72158-01","price":81.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-72158-01.jpg?v=1785154237"},{"product_id":"oreck-plastic-fan-uprights-530088883001009100-09-75300-01","title":"Oreck Brush Roll Fan - XL \/ U Series Upright","description":"\u003cp\u003ePart 09-75300-01+ is the plastic fan for Oreck XL and U series uprights, the component the motor turns to generate the machine's airflow. This is the fan itself and not a brush roll part, so it is what to order when suction has gone and the nozzle, bag and hose are all clear.\u003c\/p\u003e\u003cp\u003eThese fans fail from impact rather than gradual wear. A hard object travels through the nozzle opening, a blade chips on impact, and the wheel is left running out of balance on every turn it makes after that. The result is a fresh rattle, a noticeable shift in pitch coming from the motor housing, and vibration you can feel through the handle itself, with suction fading regardless of whether anything is actually blocking the airway.\u003c\/p\u003e\u003cp\u003eAn out-of-balance fan also puts uneven load on the motor turning it, so catching the problem at the first new rattle spares the motor from that wear on top of the suction already lost. A chipped blade does not repair itself and the imbalance only gets worse with hours run.\u003c\/p\u003e\u003cp\u003eDisconnect power at the outlet before opening the housing, and once the new fan is fitted, spin it by hand to confirm it turns smoothly and clears the surrounding housing on every side.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 09-75300-01+, plastic fan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck RU2240HHS, U2000E, U2000EB, U2000HH, U2160HH, U2250RS, U2510RH, U2640RH, U2650HHB, U2740RD, U3120HH, U3620HH, U3700HH, U3720HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e new rattle, vibration through the handle, suction loss with no blockage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e disconnect power at the outlet before opening the fan housing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456285094138,"sku":"09-75300-01+","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-75300-01_a7ca4184-1ad3-4d70-b59e-64700f552ea8.jpg?v=1785032374"},{"product_id":"oreck-nozzle-housing-9300-red-switch-no-headlight-09-75430-03","title":"Oreck Nozzle Housing - 9300 Series, Red Switch","description":"\u003cp\u003eThis genuine OEM Oreck \u003cstrong\u003enozzle housing\u003c\/strong\u003e (part #09-75430-03) is the 9300 Series version with the red switch and no headlight, built for the Oreck U2000E, U2000H, and U2000HH uprights. The housing forms the front cleaning head that carries the brush roll and directs airflow into the machine.\u003c\/p\u003e\u003cp\u003eA cracked or broken nozzle housing lets air leak past the brush chamber, which drops suction and can expose moving parts. Chips around the switch opening or mounting points make the head flex during use. Installing the correct housing restores a sealed, rigid cleaning head and dependable pickup.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck U2000E, U2000H, U2000HH, U2000R, XL2000HH, XL2000RH, XL9300G.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e nozzle housing, 9300 Series, red switch, no headlight, #09-75430-03.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e sealed airflow and a solid brush chamber.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eVerify your model and switch color before ordering. As an authorized Oreck dealer, we supply this as a genuine part covered by Oreck's manufacturer warranty.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456285225210,"sku":"09-75430-03","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-75430-03_08ea76f1-5306-4a6c-8e80-440b03e5998c.jpg?v=1785151094"},{"product_id":"oreck-blue-housing-with-reflector-xl2100rh-upright-09-75430-05","title":"Oreck Blue Nozzle Housing with Reflector - XL2100RH \/ XL2000 Upright","description":"\u003cp\u003eThe blue nozzle housing is the front cleaning head on Oreck's XL Commercial and XL Classic Commercial uprights, and it carries the headlight reflector as part of the molding. Part 09-75430-05 replaces both together.\u003c\/p\u003e\u003cp\u003eA housing cracked at the corners or gone brittle stops holding the brush roll in true alignment, and once alignment goes the machine grooms unevenly and leaks air where the head should be sealed against the floor. Broken mounting tabs add a rattle. A clouded or damaged reflector is the other reason to replace it, since the headlight is genuinely useful under furniture and a dull reflector wastes it.\u003c\/p\u003e\u003cp\u003eIt fits the XL2100RH and XL2000-series machines it is catalogued under, along with the U2000RBBW, XL2100HH and XL2100RHS.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456285290746,"sku":"09-75430-05","price":31.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-75430-05_77221483-a9d5-4fa8-840a-c0b0a0b4cae1.jpg?v=1785148010"},{"product_id":"nozzle-green-oreck-xl2090rhm-upright-09-75430-17","title":"Nozzle - Green, Oreck XL2090RHM Upright","description":"\u003cp\u003eThis is the green nozzle housing for the Oreck XL2090RHM upright, part 09-75430-17, also listed for the Oreck 7807. The nozzle is the front cleaning head: it houses the brush roll chamber, sets the height at which the machine meets the floor, and takes every impact with a baseboard or a chair leg.\u003c\/p\u003e\u003cp\u003eCracked or warped, it stops holding the brush roll square. The result is uneven grooming, one end of the strip cleaner than the other, and air bleeding in where the head should be sealed. Snapped mounting tabs are the other common failure and announce themselves as a rattle at the front of the machine.\u003c\/p\u003e\u003cp\u003eA sound housing puts the brush back in line and restores consistent contact across the full width. Worth inspecting the brush roll and belt while the nozzle is off, since a damaged housing usually means something was hit hard.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456285356282,"sku":"09-75430-17+","price":36.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-75430-17_4b0bcb00-cc3c-49ed-ba81-7ad81abf0f02.jpg?v=1785032377"},{"product_id":"oreck-upright-motor-u2000rb-u2000rb-1-grooved-shaft-09-75505-02","title":"Oreck Motor Assembly - U2000RB Upright, Grooved Shaft","description":"\u003cp\u003eThis genuine OEM Oreck \u003cstrong\u003emotor assembly\u003c\/strong\u003e (part #09-75505-02) is the grooved-shaft version built for the Oreck U2000RB and U2000EB uprights. The motor drives the suction fan and, through its grooved shaft, turns the belt that spins the brush roll.\u003c\/p\u003e\u003cp\u003eLoss of suction, a burning electrical smell, or unusually loud operation usually means the motor bearings or windings are failing. A motor at this stage leaves carpet ungroomed and can eventually stop entirely. Fitting the correct grooved-shaft motor restores full airflow and brush drive.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck U2000EB, U2000RB-1, U2000RBBW.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e motor assembly, grooved shaft, genuine OEM #09-75505-02.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e restored suction and brush-roll drive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e disconnect power before servicing; professional installation is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs an authorized Oreck dealer, we back this genuine motor with the full Oreck warranty. Verify your model before ordering.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456285421818,"sku":"09-75505-02","price":88.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-75505-02.jpg?v=1785137816"},{"product_id":"oreck-blue-grip-set-u2000rbw-xl2100rhs-upright-09-75576-06","title":"Oreck Blue Handle Grip Set - U2000RBW \/ XL2100RHS","description":"\u003cp\u003eThis genuine OEM Oreck blue \u003cstrong\u003ehandle grip set\u003c\/strong\u003e (part #09-75576-06) fits the Oreck U2000RBBW, XL2100HH, and XL2100RH uprights. The grip set is the upper handle surface you hold to steer and control the machine.\u003c\/p\u003e\u003cp\u003eHandle grips that are cracked, loose, or worn smooth make the vacuum harder to guide and uncomfortable over long cleaning sessions. A grip that no longer seats firmly can shift under your hand and reduce control. Fresh grips restore a secure, comfortable hold and full command of the machine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck U2000RBBW, XL2100HH, XL2100RH.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e blue handle grip set, genuine OEM #09-75576-06.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e secure, comfortable steering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstalls as a direct-fit replacement. As an authorized Oreck dealer, we supply this genuine grip set under Oreck's manufacturer warranty.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456285487354,"sku":"09-75576-06","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-75576-06_b1da14f4-8dd3-4b0e-943c-844034d8d7f6.jpg?v=1785137991"},{"product_id":"oreck-bottom-plate-uprights-830092002600-grey-09-75715-03","title":"Oreck Base Plate Assembly with Wheels and Side Brushes - 2000 \/ 3000 \/ 9000 Series","description":"\u003cp\u003ePart 09-75715-03 is the complete noise-suppressing base plate assembly for Oreck 2000, 3000 and 9000 series uprights: the plate itself, the wheels and the side brushes, supplied together. It also replaces the earlier 09-75715-01.\u003c\/p\u003e\u003cp\u003eThe base plate is the surface the machine rides on, and it wears from underneath where nobody looks. Flat-spotted or seized wheels make the vacuum drag and can mark hard floors. Side brushes that have gone short stop sweeping debris in toward the nozzle from along the edges. A cracked plate lets the head sit unevenly so brush contact varies across the width.\u003c\/p\u003e\u003cp\u003eBuying the assembly complete is the sensible route on a machine with years on it, since all three wear together. It fits models including the U2000R and the XL9300, XL9300C, XL9300G, XL9300H, XL9300MM, XL9300MS and XL9300S.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456285520122,"sku":"09-75715-03","price":48.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-75715-03.jpg?v=1785148592"},{"product_id":"oreck-motor-assembly-kit-xl-21-series-headlight-motor-version-not-available-052025-09-77038-02","title":"Oreck Motor Assembly - XL21 Series Upright (Fan Not Included)","description":"\u003cp\u003ePart 09-77038-02 is the replacement motor for Oreck XL21 series uprights, also known by its Johnson designation U-8220. The fan shaft measures 1-1\/4 inches. Note that the fan is not supplied with it and must be ordered separately, and this motor should not be used with the 927 patch pin.\u003c\/p\u003e\u003cp\u003eMotors give plenty of warning. Suction falls away over months rather than overnight, the machine runs hotter and louder than it used to, and eventually it starts cutting out mid-clean as the thermal protection trips. A burning smell means stop.\u003c\/p\u003e\u003cp\u003eIt fits the XL21 range, XL21-600, XL21-700 and XL21-750, along with the U7000ECB, U7000ECP, U7000ECR, U7030ECBS, U7050ECB, U7100ECB, U7200 and U7300 machines and the U7211 variants. Unplug the vacuum and let it cool completely before starting.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456285651194,"sku":"09-77038-02","price":88.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-77038-02.jpg?v=1785149549"},{"product_id":"oreck-fan-housing-cover-xl-21-09-77230-51","title":"Oreck Fan Housing Cover - XL21 Series Upright","description":"\u003cp\u003eThe fan housing cover on the Oreck XL21 series upright forms a barrier over the fan chamber, and part 09-77230-51 is the direct replacement for it. The cover does no mechanical work on its own; its whole purpose is keeping air moving through the intended path rather than leaking past the fan, and that quiet job is exactly why a warped or split cover costs suction without the motor ever sounding any different.\u003c\/p\u003e\u003cp\u003eDamage to this cover tends to follow one of two routes. Either a fan blade breaks loose and chips the cover on its way past, or the plastic simply grows brittle with age around the screw bosses and splits the next time the housing is opened. Air pulled in through a crack in the cover bypasses the nozzle entirely, letting the vacuum run at what sounds like full strength while it cleans noticeably worse than it should.\u003c\/p\u003e\u003cp\u003eBecause this part sits directly against the fan, check it any time the motor assembly is opened for another repair instead of waiting for a separate complaint to send you looking for it. A hairline split is easy to miss at a glance, so run a finger along every edge and screw boss before closing the housing back up.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e fan housing cover, 09-77230-51\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck U7000ECB, U7000ECP, U7000ECR, U7010ECS, U7020ECBS, U7030ECBS, U7050ECB, U7060ECS, U7070ECS, U7100ECB, XL21600ECB, XL21700ECB, XL21750ECB, XL21780EYB, XL7605EYB, XL7705ECB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e keeps airflow moving past the fan without leaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom of failure:\u003c\/strong\u003e reduced pickup with an otherwise normal-sounding motor\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis replacement cover is shaped for a direct fit against the fan on the models listed above.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456285749498,"sku":"09-77230-51","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-77230-51.jpg?v=1785158152"},{"product_id":"oreck-clamp-assembly-u7240-pilot-upright-09-79038-51","title":"Oreck Clamp Assembly - U7240 Pilot Upright","description":"\u003cp\u003ePart 09-79038-51 is the clamp assembly on the Oreck U7240 Pilot upright, a small tensioned piece that keeps sections of the housing pulled tight against each other rather than doing any visible cleaning work itself. Like most plastic clamps under constant tension, it tends to give out at its pivot point instead of cracking straight across, and it often goes with little warning.\u003c\/p\u003e\u003cp\u003eOnce this clamp loses its grip, whatever it was holding shut begins to shift with every pass of the machine. A joint that should stay fixed starts to rattle first, wears at the contact points next, and if the clamp was part of the housing's sealed path, a lost seal follows after that. Catching the problem while it is still just a rattle beats waiting for the housing to come apart mid-use.\u003c\/p\u003e\u003cp\u003eSwapping the clamp is quick once the housing is open, and it puts the same firm closure back in place that the machine had when new. It is a minor part, but a machine running daily depends on every small fastener holding its housing together.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e clamp assembly, 09-79038-51\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck U7200ECB, U7210ECB, U7210ECR, U7211ECB, U7211ECG, U7211ECP, U7211ECR, U7212ECB, U7220ECS, U7230ECS, U7240ECS, U7241ECS, U7250ECS, U7300ECB, U7330ECBS, UK30300, UK30300COM, UK30300PC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e holds housing sections closed under tension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom of failure:\u003c\/strong\u003e a rattle that grows into a lost seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSeveral Pilot-series machines use clamps that look nearly identical, so check this part number against your unit's own documentation rather than matching by appearance.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456285847802,"sku":"09-79038-51","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-79038-51_ce96ceaa-32d2-4bd9-a68d-b23c8f248606.jpg?v=1785158109"},{"product_id":"oreck-pilot-upright-bottom-plate-u7000-09-79049-51","title":"Oreck Bottom Plate - U7000 \/ U7200 Pilot Upright","description":"\u003cp\u003ePart 09-79049-51 is the underside panel of the Oreck U7000 and U7200 Pilot upright, the plate the entire machine rests on, with the intake opening for the nozzle cut straight through its middle. This is the surface that actually meets the carpet and forms the seal keeping airflow moving through the pile instead of leaking around it.\u003c\/p\u003e\u003cp\u003eHeat radiating from the nearby motor causes these plates to warp over time, and repeated trips over thresholds and door saddles eventually crack them outright. Once the plate stops sitting flat, the nozzle no longer contacts the floor evenly, brush pressure goes heavy on one side of the strip and light on the other, and outside air gets drawn in through the resulting gap rather than through the carpet fibers themselves. A vacuum in that state can run a perfectly sound motor and still leave streaks and missed passes across a floor that was just cleaned.\u003c\/p\u003e\u003cp\u003eWith the old plate removed, take the opportunity to inspect the wheels and the brush strip underneath for wrap and uneven wear before closing the housing back up, since both sit exposed at the same moment and are easy to overlook once the fresh plate is fastened into place. This particular plate spans a wide swath of the Pilot lineup, so confirm the exact model against the fitment list below before ordering, since the U7000 and U7200 families share this panel across many trim variants built on the same underlying chassis.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 09-79049-51\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e underside panel forming the floor seal around the nozzle opening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e U7000 Pilot, U7200 Pilot, U7200ECB, U7210ECB, U7210ECR, U7211ECB, U7211ECG, U7211ECP, U7211ECR, U7212ECB, U7220ECS, U7230ECS, U7240ECS, U7241ECS, U7250ECS, U7300ECB, U7330ECBS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSigns of failure:\u003c\/strong\u003e warping, cracking, uneven brush contact, reduced pickup despite a healthy motor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456285880570,"sku":"09-79049-51","price":51.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-79049-51.jpg?v=1785158115"},{"product_id":"oreck-fan-kit-with-washer-lightweight-upright-uk30300-09-79066-01","title":"Oreck Fan Kit with Washer - UK30300 Lightweight Upright","description":"\u003cp\u003eThis fan kit for the Oreck UK30300 lightweight upright packages the fan and its seating washer as one part number. Fitting a new fan onto an old washer that has worn scored or gone slightly dished is a common way to leave the new fan sitting a hair off its seat, so part 09-79066-01 covers both pieces and removes that guesswork.\u003c\/p\u003e\u003cp\u003eFans on a lightweight upright like this one see harder use than on machines with more filtration ahead of the motor, since little stands between the floor nozzle and the impeller blades. Anything solid that makes it up the intake reaches the blades directly, and a chipped blade announces itself through vibration, a change in the motor's running pitch, and falling suction even though nothing visibly blocks the airflow.\u003c\/p\u003e\u003cp\u003eDisconnect the power cord before opening the housing, and orient the washer the same way the original sat so the new fan seats flush. Even a slightly crooked seating shows up the moment the machine powers back on, so it pays to double-check the fit before closing the housing. Keeping the fan and washer together as one kit also means the washer never becomes the piece that gets overlooked until the housing is already closed back up.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e fan and washer kit, 09-79066-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck UK30300, UK30300COM, UK30300PC, U7200ECB, U7210ECB, U7210ECR, U7211ECB, U7211ECG, U7211ECP, U7211ECR, U7212ECB, U7220ECS, U7230ECS, U7240ECS, U7241ECS, U7250ECS, U7300ECB, U7330ECBS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e replaces the fan and its seating washer together\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom of failure:\u003c\/strong\u003e vibration, a changed motor pitch, and falling suction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Oreck kit is matched for the lightweight and Pilot models listed above.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456285946106,"sku":"09-79066-01","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-79066-01.jpg?v=1785149102"},{"product_id":"oreck-joint-assembly-u7200-u7300-upright-uk30300-09-79067-01","title":"Oreck Joint Assembly - U7200 \/ U7300 Upright","description":"\u003cp\u003ePart 09-79067-01 is the pivot assembly that lets the handle recline against the body on the Oreck U7200 and U7300 upright lines, and the same joint is fitted across the UK30300 series. Every angle change dialed in at the grip travels through this single pivot before it reaches the wheels underneath, so it absorbs a load concentrated in one spot that most other parts of the machine never see.\u003c\/p\u003e\u003cp\u003eWear here tends to follow a sequence. Play shows up first as a faint looseness felt more than heard. Next comes a click at the pivot each time the handle sweeps through its working angle, often loudest right in the middle of a normal recline motion. Left unaddressed, the housing itself begins to crack around the pin, and at that point the handle can come loose from the body entirely, typically mid-stroke rather than while the machine sits idle.\u003c\/p\u003e\u003cp\u003eBefore ordering, work the handle through its full arc on the machine already in hand and note exactly where any looseness or clicking shows up. A pivot problem announces itself right at that joint; wobble felt further up the tube usually points at a different part entirely, so pinning the source down first avoids buying the wrong fix and starting the job twice. Full model coverage for this pivot spans the U7200 and U7300 families along with the UK30300 series, so double-check the plate on the machine against the list below before placing an order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 09-79067-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e handle-to-body pivot controlling recline and steering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSigns of wear:\u003c\/strong\u003e play at the handle, a click at the pivot, or a cracked housing near the pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e U7200ECB, U7210ECB, U7210ECR, U7211ECB, U7211ECG, U7211ECP, U7211ECR, U7212ECB, U7220ECS, U7230ECS, U7240ECS, U7241ECS, U7250ECS, U7300ECB, U7330ECBS, UK30300, UK30300COM, UK30300PC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456286011642,"sku":"09-79067-01","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-79067-01.jpg?v=1785137977"},{"product_id":"joint-repair-kit-oreck-u7200-pilot-upright-09-79068-01","title":"Oreck U7200 Pilot Upright Joint Repair Kit","description":"\u003cp\u003eThe joint that lets an Oreck Pilot's handle recline and swivel also carries the machine's entire push-pull load, and all of that work concentrates wear in one place. This kit, part 09-79068-01, rebuilds that joint on the U7200 Pilot and the related Oreck 8664.\u003c\/p\u003e\n\u003cp\u003eWear shows up as play you notice before you can see it. The handle stops staying at the angle you left it, creeping a few degrees on its own as you push, and the connection at the base feels looser with every passing month. Left alone, that play only grows, until steering the machine starts to feel like dragging it sideways instead of pushing it in a straight line.\u003c\/p\u003e\n\u003cp\u003eRebuilding this one joint instead of retiring the whole upright makes sense on a Pilot, a line built to stay in service for years. Oreck's listing does not itemize what ships in the kit, so lay the contents out against your machine's parts diagram before starting the teardown, and keep the old pieces on the bench until the rebuilt joint has proven itself through a few cleaning sessions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 09-79068-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck U7200 Pilot, Oreck 8664\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e handle-to-body joint repair kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e handle play, drifting angle, loose steering feel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e confirm against your machine's parts diagram that this kit covers the joint pieces that have actually worn on your unit, since the listing gives the kit as a whole rather than an itemized contents list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck the model plate on your unit before ordering: this kit is listed for the U7200 and 8664 specifically, and a joint kit is one part where a close-but-wrong match still leaves you with the same loose handle.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456286077178,"sku":"09-79068-01","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-79068-01_4ed42bf4-fcb7-48f9-9c0d-a1d41dfb0d78.jpg?v=1785150520"},{"product_id":"oreck-swivel-fan-housing-lw1500rs-upright-uk31600-09-83223-01","title":"Oreck Swivel Fan Housing (Neck Assembly) - LW1500RS \/ UK31600 Upright","description":"\u003cp\u003eOn the Oreck LW1500RS the fan housing doubles as the neck: it carries the motor and fan on one side and forms the swivel joint to the handle on the other. Part 09-83223-01 replaces the whole assembly.\u003c\/p\u003e\u003cp\u003eBecause it is both a structural and an airflow component, a crack here causes two problems at once. Air leaks into the path between fan and nozzle, so suction at the floor drops with no blockage to find, and the swivel develops play, so the handle wobbles and steering goes vague. Both usually appear together, and both get worse quickly once the plastic has started to split.\u003c\/p\u003e\u003cp\u003eIt fits the LW1500RS, the UK30500 and the UK31600 uprights. Unplug the machine before opening the housing, and check the fan and its fixings while the assembly is apart.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456286404858,"sku":"09-83223-01","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/09-83223-01.jpg?v=1785142267"},{"product_id":"oreck-switch-lead-cord-and-cord-cord-kit-9300g2500-3wire-commercial-upr-includes-handle-grip-097561101","title":"Oreck Cord, Switch, and Handle Assembly Kit - 9000 Series Commercial","description":"\u003cp\u003ePart 097561101 is a complete replacement kit for the Oreck 9000 series of commercial uprights, listed for the XL9300G. The handle grip, the switch, the lead cord and the main power cord all arrive together as one assembly, wired in the three-wire commercial configuration these machines use, so a repair that would otherwise mean sourcing four separate pieces becomes a single order and a single teardown.\u003c\/p\u003e\u003cp\u003eThat grouping matters on a machine that runs commercial hours, because these parts tend to wear out together after years of daily service. The cord frays where it leaves the handle, the switch loses its clean snap after thousands of cycles, and the grip cracks from the same hand pressure landing on the same spot shift after shift. Chasing each failure separately would mean stripping the handle down several times over the life of the machine; the kit resets all of it in one pass. On a route running several machines, it also standardizes the repair, since one part number covers the whole handle-end electrical set instead of a drawer of individual components.\u003c\/p\u003e\u003cp\u003eDisconnect the machine from power completely before starting, and keep the old assembly within reach as a reference while fitting the new one. Match the cord's run from the motor housing up to the handle piece by piece rather than improvising a new path, and confirm every connection seats fully before the housing closes. Test the switch with the housing still open, so a loose connection shows itself while everything is still reachable. If the wiring inside the old handle shows scorching or heat damage rather than plain wear, have the rest of the circuit checked as well, since a cord kit cures worn parts but not whatever overheated the originals.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 097561101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e switch, lead cord, power cord, and handle grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e three-wire commercial configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck 9000 series commercial uprights, including the XL9300G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456286699770,"sku":"097561101","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/097561101.jpg?v=1785141675"},{"product_id":"dirt-devil-feather-light-belt-royal-5-1540310001","title":"Dirt Devil Style 4 Belt - 2 Pack - Featherlite, Scorpion, Breeze, Vision Uprights","description":"\u003cp\u003eThis \u003cstrong\u003eStyle 4 flat belt\u003c\/strong\u003e ships as a two-pack and drives the brush roll on Dirt Devil Featherlite, Scorpion, Breeze, and Vision uprights, along with several Oreck, Regina, and Royal models. The belt transfers motor power to the brush roll so it spins and agitates the carpet.\u003c\/p\u003e\n\u003cp\u003eA stretched or broken belt lets the brush roll slow or stop turning, and cleaning suffers even while the motor runs. A fresh belt, made to factory specification, restores full brush roll speed and steady carpet agitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Dirt Devil 085525, 085530, 085535, 085540, 085545, 085560, 085600, 085610; Oreck PT101, PT151; Regina HDU200, HDU500; Royal RY5000, RY5200, UR30080\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e two flat belts per pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e full brush roll speed and carpet agitation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe belt loops between the motor shaft and brush roll as a direct-fit replacement. Verify your model number before ordering, and inspect the brush roll while the belt is off.\u003c\/p\u003e","brand":"Dirt Devil","offers":[{"title":"Default Title","offer_id":48456413872378,"sku":"1540310001","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1540310001_9f714968-9aa6-4986-963e-fcc3b3139681.jpg?v=1785154074"},{"product_id":"replacement-belt-oreck-upright-models-17390","title":"Replacement Belt - Oreck Upright Models","description":"\u003cp\u003eThis replacement \u003cstrong\u003ebelt\u003c\/strong\u003e fits Oreck upright models and drives the brush roll that agitates carpet fibers. It is also listed as part #430001311.\u003c\/p\u003e\u003cp\u003eOver time the belt stretches and loses tension, so the brush roll cannot properly agitate the carpet and dirt is left behind. A fresh belt returns the brush roll to full speed and restores effective cleaning. Since belts wear gradually, cleaning can decline well before the belt actually breaks, so periodic replacement keeps performance steady.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck upright models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e number 430001311\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e drives the brush roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e replace every 3 to 6 months, or immediately if the brush stops spinning\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe belt loops on as a direct-fit replacement. Verify your Oreck model before ordering to confirm the correct belt.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456471052538,"sku":"17390","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/17390_66cfc3c5-f2af-4523-803e-2645f383e619.jpg?v=1785151774"},{"product_id":"filter-charcoal-oreck-air-instinct-108-air-cleaner-1yropk1","title":"Oreck Air Instinct 108 Charcoal Air Purifier Filter","description":"\u003cp\u003eThe activated charcoal odor absorber for Oreck air cleaners, genuine part 1YROPK1. It fits the Air 108 and the AirInstinct 75, 100, 150 and 200, and measures 11 by 14 inches.\u003c\/p\u003e\u003cp\u003eCharcoal does the job a particle filter cannot. Smoke, cooking, pets and the sharp chemical smell of new furnishings are gases rather than dust, and they pass straight through media filtration until something adsorbs them. This cartridge is that something, and it works until the carbon is saturated, at which point the machine still moves air but the room stops smelling any better.\u003c\/p\u003e\u003cp\u003eOreck's interval is twelve months, sooner in a smoking household. Do not wash it, since water ruins the carbon; if it looks dusty, a gentle pass with a soft brush attachment is all it needs.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456491499770,"sku":"1YROPK1","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1YROPK1.jpg?v=1785155950"},{"product_id":"thrust-washer-oem-hoover-innovation-21328033","title":"Hoover Thrust Washer - Innovation Upright","description":"\u003cp\u003eThis is the thrust washer that rides inside a Hoover Innovation upright, cataloged as part 21328033. Seated on a rotating shaft, it takes the sideways load that shaft generates and holds the assembly in position so it turns in place instead of creeping along its own axis.\u003c\/p\u003e\u003cp\u003eThe same washer is also cross-referenced under the Oreck number PT357, which is worth knowing if you are checking a parts diagram that uses Oreck numbering rather than Hoover's.\u003c\/p\u003e\u003cp\u003eA part this small is easy to set aside and forget once a repair is underway, but skipping it at reassembly has real consequences. Whatever it locates picks up play, begins to wobble, and rubs against the housing around it, and that makes itself heard as a grind or a tick, adds drag that makes the machine noticeably harder to push, and accelerates wear on parts that cost far more than the washer itself to replace. The washer typically sits sandwiched between a bearing and the shoulder of its shaft, so getting to it means pulling whatever assembly rides on that shaft, usually the brush roll or a drive pulley depending on where in the machine it sits. Keep track of orientation when you remove the old one, since some thrust washers are not symmetrical front to back.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e thrust washer, 21328033 (also cataloged as Oreck PT357)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hoover Innovation upright\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e locates a rotating shaft against sideways load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom if worn or missing:\u003c\/strong\u003e grinding or ticking noise, added drag, accelerated wear on the parts around it\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWith the machine already open enough to get at it, put in a fresh washer instead of reinstalling the old one. At this point in a teardown, doing it right costs almost nothing extra.\u003c\/p\u003e","brand":"Hoover","offers":[{"title":"Default Title","offer_id":48456517812474,"sku":"21328033","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/21328033_dc2b396f-12f5-4f6c-8e35-fda50de95756.jpg?v=1785145477"},{"product_id":"green-scrub-brush-oreck-orbiter-237057","title":"Green Scrub Brush (12\" Diameter) - Oreck Orbiter Floor Machine","description":"\u003cp\u003eGreen is the light-duty grade in the Oreck Orbiter brush range: a 12-inch scrub brush with crimped polypropylene fill of 0.015 inch, sold as part 237057. It mounts to the Orbiter floor machine, including the Oreck 3907, and is also listed for the ORB550MC, ORB600MW and ORB700MC.\u003c\/p\u003e\u003cp\u003eReach for green when the floor needs agitation rather than aggression, on smooth, textured or painted concrete, garage slabs and routine cleaning where a stiffer grade would scuff. The polypropylene fill is what makes it economical to run at that duty.\u003c\/p\u003e\u003cp\u003eBristles flatten as they wear, and a flattened brush stops cutting. The machine glides, the water stays clean when it should be coming up dirty, and the finish comes out patchy across the floor. When the fill no longer stands up under its own weight, it is finished. Fitting a new one takes seconds on the Orbiter drive.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456525709562,"sku":"237057","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/237057_d50ceb25-5273-4bf2-a54e-366aaf8acca6.jpg?v=1785142339"},{"product_id":"hose-retention-clip-hoover-u6660-900-windtunnel-upright-36172015","title":"Hoover Hose Retention Clip - U6660-900 Windtunnel","description":"\u003cp\u003eHolding the hose in its channel on the Hoover U6660-900 WindTunnel upright, this genuine OEM \u003cstrong\u003ehose retention clip\u003c\/strong\u003e (Part #36172014) also fits other Hoover 900 and U6660 models. It keeps the hose routed and secure along the machine body.\u003c\/p\u003e\u003cp\u003eA broken or missing clip lets the hose sag out of its channel, where it can kink or pull loose at the connections and cost you suction. Reseating the hose with the correct clip keeps it tracked and maintains steady airflow through the system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Hoover U6660-900 WindTunnel and other 900 and U6660 models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e retains the hose in its body channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e consistent suction and a hose that stays put\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e route the hose fully before snapping the clip closed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe clip installs by hand in place of the original. Check your model number on the data plate before ordering.\u003c\/p\u003e","brand":"Hoover","offers":[{"title":"Default Title","offer_id":48456568144122,"sku":"36172014","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/36172014_68b9f371-7fa6-4c89-afc0-bd4449738aa8.jpg?v=1785007362"},{"product_id":"eureka-motor-housing-hoover-upright-37193009","title":"Hoover Motor Housing - Upright","description":"\u003cp\u003ePart 37193008 is a motor housing cataloged for Eureka and Sanitaire SC580A commercial uprights, and the same housing is also listed for the Oreck PT357. The housing is the molded shell the motor sits inside, bracing it on its mounts and sealing the air path around it.\u003c\/p\u003e\u003cp\u003eHousings typically fail from a sharp impact, such as tumbling down a flight of stairs or catching a table leg, rather than from ordinary wear. Once the shell splits, whatever sits inside it can shift and buzz against its mounts, and the opening itself lets grit and uncontrolled air reach the motor, both of which shorten its life.\u003c\/p\u003e\u003cp\u003eA change in the machine's running sound right after a drop, or a new rattle that was not there before, is reason enough to check this housing before assuming the motor itself has failed.\u003c\/p\u003e\u003cp\u003eBefore you install the replacement, check the motor's mounting points for the same kind of hairline cracking that took out the old housing, since a shell that failed once from an impact often means the motor absorbed some of that shock as well.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 37193008, motor housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Eureka SC580A, Sanitaire SC580A, Oreck PT357\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e holds the motor steady in its mounts and keeps the air path sealed around it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e cross-check part 37193008 against your unit's schematic before you order\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hoover","offers":[{"title":"Default Title","offer_id":48456571519226,"sku":"37193008","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/37193008.jpg?v=1785163582"},{"product_id":"oreck-front-caster-wheel-sv280-canister-381099","title":"Oreck Front Caster Wheel - SV280 Canister","description":"\u003cp\u003eFront caster wheel for the Oreck SV280 canister, part 381098. It carries the front of the body and pivots so the canister tracks behind you instead of fighting the hose.\u003c\/p\u003e\u003cp\u003eCasters fail in two ways and both are obvious underfoot. The wheel seizes in its fork, so the canister skids and leaves marks on hard floors, or the pivot wears and the wheel shimmies, so the machine wanders and catches on rug edges. Either way the pull comes through the hose, which is exactly where you do not want the strain, because hose cuffs split from being used as a tow rope.\u003c\/p\u003e\u003cp\u003eThe replacement presses into the original caster mount during reassembly. Clear the wound hair out of the mount before fitting, since that is usually what stopped the old wheel turning in the first place.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456574402810,"sku":"381098","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/381098_3ceaf98b-3855-4e88-b2f1-05681b2ecafd.jpg?v=1785007464"},{"product_id":"filter-hepa-oreck-air-instinct-108-air-purifier-3yrhpk1-1","title":"Oreck Air Instinct 108 HEPA Air Purifier Filter","description":"\u003cp\u003e3YRHPK1 is Oreck's HEPA filter replacement for the AirInstinct air purifiers. Oreck lists it against the AirInstinct 75, 100, 150 and 200, and the parts trade carries it for the 108 as well, cross-referenced to the older AIR108HPK1 number.\u003c\/p\u003e\u003cp\u003ePurifier media loads on a calendar rather than on a use schedule, because the same air keeps passing through the unit around the clock instead of once during a cleaning session. That changes what failure looks like. A purifier on old media rarely stops moving air, it just stops doing much to it. The room never quite loses its dust or pet odor, and fine particles settle back onto surfaces at close to the rate they did before the unit was switched on.\u003c\/p\u003e\u003cp\u003ePull the filter out into good light rather than judging it through the housing. Media that has gone visibly grey has been carrying a heavy load for a while, whatever the indicator on the front of the unit reports. Change the carbon odor stage at the same time if your unit runs one, since fresh HEPA media behind a saturated odor filter still starves for airflow.\u003c\/p\u003e\u003cp\u003eWhere the unit sits changes how fast it gets through media. A purifier pushed against a wall or tucked under a shelf recirculates the same pocket of air instead of drawing from the room, which makes it look ineffective long before the filter is actually finished. Give it clearance on the intake side and note the date on the new filter when it goes in, because with an appliance that runs continuously the calendar is a more honest guide than memory.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 3YRHPK1, HEPA filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck AirInstinct 75, 100, 108, 150 and 200 purifiers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed as:\u003c\/strong\u003e AIR108HPK1 on older 108 units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e lingering dust or odor with the unit running, media visibly greyed\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456582562042,"sku":"3YRHPK1","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3YRHPK1.jpg?v=1785150429"},{"product_id":"oreck-orbitor-blue-scrub-pad-400413","title":"Blue Scrub Pad - Oreck Orbiter, 12\" Diameter","description":"\u003cp\u003eTwelve-inch blue scrub pad for the Oreck Orbiter, part 400412, also listed as 437057 and 437-057.\u003c\/p\u003e\u003cp\u003eBlue sits in the middle of the pad range and is the one most floors actually want. It scrubs harder than a red pad without the cut of black, which makes it the right choice for routine scrubbing on hard floors and for light stripping where the finish is thin rather than built up.\u003c\/p\u003e\u003cp\u003eWhat goes wrong with a scrub pad is not that it wears thin but that it glazes. The open texture that grips and lifts soil fills and flattens, and from then on the machine is polishing dirt into the floor rather than removing it, so the floor comes up shiny and still dirty. Rinse the pad after each use to keep the fibres open, and replace it once the surface has gone smooth. It seats onto the drive block in seconds.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456583414010,"sku":"400412","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/400412_153a787d-d32e-4f91-bb7e-73506a3bd889.jpg?v=1785007608"},{"product_id":"hepa-filter-with-charcoal-oreck-air-refresh-wk15500b-430000099","title":"HEPA Filter with Charcoal - Oreck Air Refresh WK15500B","description":"\u003cp\u003eThis is the replacement filter for the Oreck Air Refresh WK15500B, part 430000098. It pairs HEPA media with an activated charcoal layer, so a single cartridge handles both of the jobs the unit is bought for: trapping fine airborne particles and pulling odors out of the air passing through it.\u003c\/p\u003e\u003cp\u003eFilters load up with what they catch. As the media fills, the fan works harder against it, airflow through the unit falls away, and the room stops clearing the way it did when the machine was new. Odor control usually fades first, since the charcoal saturates well before the HEPA layer blinds off.\u003c\/p\u003e\u003cp\u003eIf the Air Refresh has grown quieter at the outlet, or smells are lingering in a room it used to handle, the filter is the part to change. It lifts out and drops back in without tools.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456591278330,"sku":"430000098","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/430000098_29a2791e-e995-4571-95df-494174c0a575.jpg?v=1785147468"},{"product_id":"oreck-control-fan-housing-uk30100pc-430000201","title":"Oreck Control Fan Housing - UK30100PC Elevate","description":"\u003cp\u003eOreck part 430000200 is the fan housing from the Elevate Control series uprights, fitting the UK30100, UK30100PC and UH30100COM. It is the chamber the fan spins inside, and its shape is what turns the fan's work into suction at the nozzle rather than noise inside the machine.\u003c\/p\u003e\u003cp\u003eA housing that has cracked, usually from an impact or from something hard finding its way through the fan, stops being airtight. Air short-circuits around the fan instead of coming up the duct, so suction falls off across the board, and a fan running in a distorted housing often adds a whine or a knock that was not there before.\u003c\/p\u003e\u003cp\u003eUnplug the machine before opening the fan area, and look at the fan itself while it is exposed. Whatever cracked the housing rarely left the fan untouched.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456591507706,"sku":"430000200","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/430000200.jpg?v=1785139578"},{"product_id":"oreck-cord-dump-kit-uk30200-upright-430000202","title":"Oreck Cord Dump Kit \/ Cord Wrap - UK30200 Upright","description":"\u003cp\u003eThe cord dump is the release-and-wrap hardware that lets an Oreck upright shed its cord in one motion and take it back for storage. Part 430000201 covers the Control and Command machines: the UK30100, UK30100PC, UH30100COM, UK30200, UK30200PC and UK30270.\u003c\/p\u003e\u003cp\u003eThese parts live on a hinge and a spring, and both wear. The wrap stops holding tension so the coil sags off the machine, or the release no longer catches and the cord dumps itself while you are working. Cracked plastic at the mount is common on machines that have been stored for years with the cord pulled tight around it.\u003c\/p\u003e\u003cp\u003eThe kit replaces the mechanism at its original fixings, which is a more durable answer than persuading a broken hook to hold. Unplug the vacuum before working on the cord system.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456591638778,"sku":"430000201","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/430000201.jpg?v=1785138833"},{"product_id":"oreck-base-uk30100-upright-430000203","title":"Oreck Nozzle Housing Base - UK30100 Upright","description":"\u003cp\u003eThis is the nozzle housing base for the Oreck UK30100, UK30100PC and UH30100COM uprights, part 430000202. It is the lower shell of the cleaning head, the piece everything else bolts into: brush roll, wheels and the nozzle inlet itself.\u003c\/p\u003e\u003cp\u003eBases do not wear out so much as break. A hard knock into a stair riser, or years of leverage at the pivot, splits the plastic around a mounting point, and from then on the head has a hinge where it should be rigid. You feel that as a head that rocks, cleans better on one side than the other, or throws its belt because the roller can no longer sit square.\u003c\/p\u003e\u003cp\u003eMove the wheels, roller and belt across as a set when you fit the new base, and check the belt while the head is apart.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456591704314,"sku":"430000202","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/430000202_61785dc5-eaab-40c9-a3f1-2df4ac64bff1.jpg?v=1785137561"},{"product_id":"oreck-elevate-air-duct-kit-with-gasket-430000205","title":"Oreck Elevate Air Duct Kit with Gasket","description":"\u003cp\u003eOreck's Elevate uprights carry air from the nozzle up through a molded duct with a gasket at the joint, and part 430000204 supplies both together. It is listed for the UK30270, UK30300, UK30300COM, UK30300PC and the BK95519.\u003c\/p\u003e\u003cp\u003eThe gasket is what usually gives up first. It compresses, hardens, and stops filling the joint, so the machine draws room air at the seam rather than air from the floor. The symptom is a vacuum that sounds strong and leaves grit behind, sometimes with a hiss you can find by running a hand along the joint while it runs.\u003c\/p\u003e\u003cp\u003eBecause the duct and its seal come as a kit, the whole joint gets rebuilt at once. Seat the gasket evenly before drawing the duct down, or the leak comes straight back.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456591802618,"sku":"430000204","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/430000204_8c4be317-6caf-4ba3-ad54-6484d5c0afa7.jpg?v=1785140103"},{"product_id":"oreck-cord-dump-kit-uk30300pc-upright-430000206","title":"Oreck Cord Dump Kit - UK30300PC Upright","description":"\u003cp\u003eThis cord dump kit is the cord storage hardware from the Oreck UK30300 Conquer uprights, part 430000205, and it also fits the UK30300COM and UK30300PC.\u003c\/p\u003e\u003cp\u003eIt does two things: holds the cord tight against the machine, and lets go of the whole coil when you want the full run. When the hook cracks or the mechanism loses its grip, the cord slides off mid-job into whatever you are cleaning around, and it will not stay coiled for storage either. On commercial machines this shows up quickly, because the cord is taken down and put back several times a day.\u003c\/p\u003e\u003cp\u003eReplacing the assembly is a more durable fix than gluing a broken hook back on, and it fits the original mounting points. Unplug the vacuum before working around the cord.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456591868154,"sku":"430000205","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/430000205.jpg?v=1785140727"},{"product_id":"oreck-elevate-fan-housing-uk30200pc-430000209","title":"Oreck Elevate Fan Housing - UK30200 \/ UK30200PC","description":"\u003cp\u003ePart 430000208 is the fan housing from the Oreck Elevate Command uprights, the UK30200 and UK30200PC, and it fits the UK30270 as well. It encloses the fan and channels its output into the duct that ends at the nozzle.\u003c\/p\u003e\u003cp\u003eFan housings are the part that pays when something hard gets past the nozzle. A chip or a split in the chamber wall lets air recirculate around the fan instead of moving through the machine, and suction drops out of all proportion to how small the damage looks. Cracks near the mounting flange let the housing shift slightly under load, which is usually what you are hearing when a machine picks up a new rattle or whistle at full speed.\u003c\/p\u003e\u003cp\u003eUnplug the vacuum before opening the fan area, and inspect the fan blades once the housing is off.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456591966458,"sku":"430000208","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/430000208_32c990df-0f0b-4366-89f5-cf5a322f05b1.jpg?v=1785007761"},{"product_id":"oreck-pcb-kit-uk30300pc-upright-uk30200-430000281","title":"Oreck PCB Service Kit - UK30300 \/ UK30200 Elevate Upright","description":"\u003cp\u003eThis PCB service kit, part 430000280, supplies the replacement control board for Oreck UK30270, UK30300, UK30300COM and UK30300PC upright vacuums. Electronic faults imitate mechanical ones closely, which is why a machine with a failed board is so often diagnosed as having a failed motor.\u003c\/p\u003e\u003cp\u003eA board that has stopped working reliably usually shows up as inconsistent power, lights that will not respond to the switch, or a vacuum that will not start at all despite a good motor and cord. Testing the electronics before condemning a motor can save an expensive and unnecessary swap. Boards can also fail intermittently, which is often more frustrating to chase down than an outright dead one, since the machine may run fine for a while before cutting out again.\u003c\/p\u003e\u003cp\u003eInstalling a control board kit is precision work compared to most vacuum repairs: static discharge and forced connectors can damage a good board before it ever gets tested. Take the same care you would with any circuit board, and match the connector orientation of the old board when wiring in the replacement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e Oreck PCB service kit, part 430000280\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oreck UK30270, UK30300, UK30300COM, UK30300PC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e replacement control board for the listed uprights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore installing:\u003c\/strong\u003e unplug the vacuum and handle the board by its edges\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eVacuums and More is an authorized Oreck dealer, and we can help confirm this kit matches your specific upright before you order.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456592031994,"sku":"430000280","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/430000280_854e7e7f-86b9-46c6-80d9-36b174a4059f.jpg?v=1785149098"},{"product_id":"oreck-cord-uk30200pc-elevate-upright-430000282","title":"Oreck Power Cord - UK30200PC Elevate Upright","description":"\u003cp\u003eThis is the mains cord for the Oreck Elevate uprights, part 430000281, fitting the UK30100, UK30100PC, UH30100COM, UK30270 and the UK30200PC.\u003c\/p\u003e\u003cp\u003eCords fail at the two places they flex: just behind the plug, and where the cord enters the machine at the strain relief. What you notice is power that comes and goes as the cord is moved, a plug that runs warm, or a length of jacket scuffed open by a doorway. Any exposed conductor means the machine should stay unplugged until the cord has been changed, however well it seems to be running.\u003c\/p\u003e\u003cp\u003eFit it with the vacuum unplugged and route the new cord exactly as the old one ran, so nothing is pinched when the housing closes back up.\u003c\/p\u003e","brand":"Oreck","offers":[{"title":"Default Title","offer_id":48456592130298,"sku":"430000281","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/430000281_9cdbd4cd-be38-4c78-acb2-e5852eb5d092.jpg?v=1785150084"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/collections\/Oreck.jpg?v=1708456207","url":"https:\/\/evacuumsandmore.com\/collections\/oreck.oembed?page=16","provider":"Vacuums and More","version":"1.0","type":"link"}