{"title":"Plastiflex","description":null,"products":[{"product_id":"black-hose-sock-with-padded-zipper-30-ft-06-1018-02","title":"Black Hose Sock with Padded Zipper - 30 ft","description":"\u003cp\u003eThis black \u003cstrong\u003ehose sock\u003c\/strong\u003e with a padded zipper covers a central vacuum hose up to 30 feet, protecting it while giving a polished look. The snug sleeve wraps the hose from end to end for a comfortable grip and a tidy finish.\u003c\/p\u003e\n\u003cp\u003eDragging a bare hose around the home leaves scuffs on walls and furniture and puts wear on the hose itself. A padded sock cushions the hose and shields your surfaces from marks, and the full-length zipper makes it simple to slip on or take off for cleaning.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e central vacuum hoses up to 30 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e padded protective sleeve with a zipper closure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e protects walls and furniture and adds a clean look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e also offered as part #VS-PZTTGN-30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eZip the sock over the hose for a quick, no-tool fit. Confirm your hose length before ordering so the sock covers the full run.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48456284209402,"sku":"06-1018-02","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/06-1018-02.jpg?v=1785142332"},{"product_id":"plastiflex-telescopic-wand-cord-male-female-1261136-305","title":"Plastiflex Telescopic Wand Cord - Male-Female","description":"\u003cp\u003eElectric telescopic wands carry power to the powerhead through a cord that runs inside the tube, and this male-to-female wand cord, part 12.61136-305, is the Plastiflex replacement for it. It is listed for the Plastiflex 5704.\u003c\/p\u003e\u003cp\u003eThe cord flexes every time the wand is extended or collapsed, so the conductors work-harden and the pins at either end wear loose. The symptom is a powerhead that cuts out when you telescope the wand, or that only runs when you hold the wand at a certain angle. Left alone, an intermittent connection arcs at the contacts and pits them.\u003c\/p\u003e\u003cp\u003eReplacing the cord restores steady power to the brush motor without touching the wand tube itself. Unplug the machine first, and check that your wand takes a male-to-female cord rather than a double-ended one before ordering.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48456378384634,"sku":"12.61136-305","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/12_61136-305.jpg?v=1785006773"},{"product_id":"pigtail-11-malefemale-black-plastiflex-36107","title":"Pigtail Cord - Filter Queen Power Nozzle, 11\" Male\/Female, Black","description":"\u003cp\u003eThis 11-inch black \u003cstrong\u003epigtail cord\u003c\/strong\u003e (part 36106) connects the electric hose to the power nozzle on Filter Queen vacuums, with one male and one female end. Its redesigned ends make a secure electrical connection, and it replaces part numbers 2301000501 and FQ-96821.\u003c\/p\u003e\n\u003cp\u003eA pigtail with frayed wires or worn contacts sends power to the nozzle intermittently, so the powerhead brush cuts out or stops turning. Replacing the cord restores a solid electrical path so the nozzle runs steadily.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Filter Queen M360SS, 75th Anniversary 112C, 99 Triple Crown with Power Nozzle CA96, 31X with Power Nozzle 48\/88, D31X with Power Nozzle 48\/88, D33 with Power Nozzle 48\/88, AN95X Majestic with Power Nozzle 96\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e 11-inch male\/female pigtail from hose to power nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e restores steady power to the powerhead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e replaces part 2301000501 or FQ-96821\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe pigtail plugs in as a direct-fit replacement at the hose and nozzle ends. Unplug the machine first, and confirm your model before ordering so the connection matches.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48456565031162,"sku":"36106","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/36106_595fdc62-0f35-4443-93db-0d0fa7997898.jpg?v=1785007349"},{"product_id":"plastiflex-chateau-central-vacuum-kit-with-pigtail-dc-conversion-wessel-ebk340-qdc-floor-tool-crev-uph-tool-99340-3001","title":"Plastiflex Chateau Central Vacuum Kit with Pigtail \u0026 DC Conversion - Wessel EBK340, QDC, Floor Tool, Crev, Uph Tool","description":"\u003cp\u003eThe Plastiflex Chateau central vacuum kit brings together a Wessel Werk EBK340 electric power nozzle, a pigtail connection, DC conversion, a QDC fitting, a floor tool, and crevice and upholstery tools. It is a complete attachment set for putting a whole-home central vacuum system to work on every surface in the house.\u003c\/p\u003e\u003cp\u003eThe EBK340 is the heart of the kit. Its motorized brushroll, driven by a geared belt for consistent rotation, lifts embedded dirt from carpet that suction alone cannot reach, giving a central vacuum the deep carpet performance of a dedicated upright.\u003c\/p\u003e\u003cp\u003eThe remaining tools handle hard floors, upholstery, and tight corners, so one kit covers the full range of household cleaning from a single system. Compatibility is confirmed for Plastiflex 4934. Whether you are outfitting a new installation or replacing a tired hose set, this is a sensible one-step upgrade.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457063334138,"sku":"99340-30.01","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/99340-30_01.jpg?v=1785008006"},{"product_id":"plastiflex-chateau-central-vacuum-kit-35-ft-with-pigtail-dc-converter-and-wessel-werk-qdc-accessories-99340-35-01","title":"Plastiflex Chateau Central Vacuum Kit - 35 Foot with Pigtail, DC Converter, and","description":"\u003cp\u003eThe Plastiflex Chateau kit supplies a complete 35-foot hose and tool set for a central vacuum system, built with a pigtail electrical connection and DC converter so the power nozzle switches on the moment the hose is plugged into an inlet. It is compatible with Plastiflex 4945 systems.\u003c\/p\u003e\u003cp\u003eAt 35 feet, the hose reaches most rooms in a house while plugged into just one wall inlet, cutting down on the number of times you have to unplug and move to a different inlet mid-job. The kit includes a floor tool, a dusting brush, a crevice tool, and an upholstery tool, so carpets, hard floors, tight edges, and fabric surfaces each get the attachment built for them instead of one nozzle trying to do every job.\u003c\/p\u003e\u003cp\u003eReplacing every component together makes sense once the hose itself has stiffened, cracked along its length, or lost continuity in the pigtail connection, since a compromised hose limits both suction and the automatic power nozzle activation the pigtail provides. Confirm your system matches Plastiflex 4945 before ordering.\u003c\/p\u003e\u003cp\u003eCheck the pigtail pins for corrosion or looseness before installing the new hose, since a poor pigtail connection is a common reason a freshly installed kit still fails to trigger the power nozzle automatically. Coil the hose loosely rather than kinking it during storage between uses, since sharp bends are what shorten a hose's working life the fastest.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 99340-35-01, Plastiflex Chateau kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex 4945 central vacuum systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e 35-foot hose with pigtail and DC converter, floor tool, dusting brush, crevice tool, upholstery tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the hose stiffens, cracks, or the pigtail connection loses continuity\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457063366906,"sku":"99340-35-01","price":436.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/99340-35-01.jpg?v=1785156725"},{"product_id":"telescopic-plastiflex-chateau-stainless-wand-ch-pl6747-305","title":"Telescopic Plastiflex Chateau Stainless Wand","description":"\u003cp\u003eThis is the stainless steel telescopic wand for the Plastiflex Chateau, sold as part CH-PL6747-305 and listed in our fitment data as the Plastiflex 1930. Stainless is the reason it lasts, shrugging off the knocks against stair nosings and door frames that leave a lighter wand dented.\u003c\/p\u003e\u003cp\u003eA wand that no longer holds its length is the usual complaint. The lock wears, the wand collapses under weight halfway through a room, and you finish the job bent over. Dents are the other one, and a dented tube both binds the sliding section and restricts the air moving through it, so pickup at the floor tool drops off.\u003c\/p\u003e\u003cp\u003eA replacement gives back the full range of extension and a firm lock at any height. Match the cuff diameter to your hose before ordering.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457144697082,"sku":"CH-PL6747-305","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/CH-PL6747-305.jpg?v=1785155016"},{"product_id":"plastiflex-grey-hose-cuff-with-metal-contact-1-38-cu9225130","title":"Plastiflex Grey Hose Cuff with Metal Contact - 1 3\/8\"","description":"\u003cp\u003eThis grey Plastiflex hose cuff, part CU9225130, is the 1 3\/8 inch fitting for the end of a central vacuum hose, and it carries a metal contact, the ring that closes the low-voltage circuit at the wall inlet and starts the power unit when the hose goes in. It is listed against the Plastiflex 1307.\u003c\/p\u003e\u003cp\u003eCuffs fail in two ways. The plastic cracks or loses its grip on the hose, so the joint leaks air and the cuff eventually stays behind in the inlet. Or the contact itself corrodes or wears thin and the machine stops starting reliably, so you find yourself twisting the hose in the inlet hunting for the spot where it catches.\u003c\/p\u003e\u003cp\u003eEither symptom gets fixed at the hose end rather than inside the wall.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457148825850,"sku":"CU9225130","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/CU9225130_c8b480fb-9794-419f-ab8c-2f426121da85.jpg?v=1785152384"},{"product_id":"handle-repair-kit-plastiflex-low-voltage-hose-no-button-no-switch-hd130efr01","title":"Handle Repair Kit - Plastiflex Low Voltage Hose, No Button No Switch","description":"\u003cp\u003eThis replacement \u003cstrong\u003ehandle repair kit\u003c\/strong\u003e (part #HD130EFR01) rebuilds the handle on a Plastiflex low-voltage central vacuum hose in the no-button, no-switch configuration. It supplies the handle components that take the wear of daily gripping and hose flexing.\u003c\/p\u003e\u003cp\u003eA cracked or worn handle makes the hose awkward to control and can compromise the connection at the wand. Rebuilding it with the correct kit restores comfortable, secure handling without replacing the whole hose.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex low-voltage hose, no-button, no-switch style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e #HD130EFR01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e rebuilds the hose handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e note how the old handle halves align before disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe kit assembles onto the hose end with basic hand tools. Confirm your Plastiflex hose style before ordering so the handle components match your low-voltage configuration.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457178677498,"sku":"HD130EFR01","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HD130EFR01_c8ddb326-0a44-4582-942c-37909c8b5a87.jpg?v=1785153338"},{"product_id":"handle-repair-kit-with-button-lock-plastiflex-no-switch-hd130efr02","title":"Plastiflex Handle Repair Kit, Button Lock, No Switch","description":"\u003cp\u003eHandles fail on central vacuum hoses well before the hose body itself wears out, and this Plastiflex repair kit, part HD130EFR02, rebuilds that end. It includes the button lock but leaves out the switch, matching hoses whose handle never carried one to begin with.\u003c\/p\u003e\u003cp\u003eThe handle takes the abuse on a central vac hose: dropped, stepped on, twisted at odd angles mid-clean. The plastic splits near the cuff joint, the button lock quits holding so the wand slides free mid-pass, or the swivel starts binding up. None of that means the hose itself is done; the tubing usually still has plenty of life left, and rebuilding the end is a smaller job than replacing the whole hose. Check the tubing along its length before deciding, a hose that has also gone stiff or split behind the cuff is past the point where a new handle end will bring it back.\u003c\/p\u003e\u003cp\u003eConfirm what your current handle has before ordering. This kit comes button-lock with no switch included, so a handle with a built-in on\/off switch calls for the switched version instead.\u003c\/p\u003e\u003cp\u003eTest the button lock a few times by hand before putting the wand back into regular use. A lock that feels stiff right out of the box usually frees up after a few cycles, while one that never catches at all is worth checking again before calling the repair finished.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HD130EFR02, handle repair kit, button lock, no switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex central vacuum hoses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e rebuilds the wand-lock handle end of the hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the cuff cracks, the button lock stops holding the wand, or the swivel binds\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457178743034,"sku":"HD130EFR02","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HD130EFR02_7d7e8be4-4897-4a21-87a1-7259a1da3dbe.jpg?v=1785154614"},{"product_id":"grip-assembly-plastiflex-30-central-vacuum-hose-no-switch-or-female-receiver-hd130gpr02","title":"Plastiflex Grip Assembly - 30 ft Hose, No Switch","description":"\u003cp\u003ePart HD130GPR02 is the gas pump style handle Plastiflex uses on its 30 foot central vacuum hoses, supplied in light gray with a metal button lock, and the screw for its stub tube comes with it. It is the grip on its own, sold without a switch and without a female receiver, so nothing electrical arrives in the box.\u003c\/p\u003e\u003cp\u003eThe handle carries a button lock and an air bleeder. The bleeder opens a small vent at the grip so suction can be eased off a curtain or a light rug without walking back to the inlet, and the button lock is what holds the wand once it is seated in the handle.\u003c\/p\u003e\u003cp\u003eGrips fail where hands hold them. Cracks open at the seam or where the grip meets the hose body, and once the shell splits, air enters at that joint and the tool end loses pull even with a clear hose behind it. A grip that has gone loose on the hose rather than cracked outright is the same joint beginning to give way.\u003c\/p\u003e\u003cp\u003eThis is a replacement for Plastiflex hoses, and the switch kit for an electric conversion is a separate purchase. Keep the old switch and receiver until the new grip is seated and holding vacuum properly. Compare the stub tube on your hose against the screw supplied here before fitting, since that joint is what the grip depends on to stay put.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HD130GPR02\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray, gas pump style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e metal button lock, plus the screw for the stub tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcludes:\u003c\/strong\u003e switch and female receiver, switch kit sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex 30 ft central vacuum hoses\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457178808570,"sku":"HD130GPR02","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HD130GPR02_52375c8c-c28d-4fbf-9b66-117da3e052b3.jpg?v=1785148517"},{"product_id":"plastiflex-hose-handle-grip-black-hd400gpr02","title":"Plastiflex Hose Handle Grip - Black","description":"\u003cp\u003ePart HD400GPR02 is the black gas-pump style handle for Plastiflex central vacuum hoses, supplied without electrical components and with the metal button lock stub tube screw included. It has a button lock to hold the wand and an air bleeder so you can drop suction at the handle.\u003c\/p\u003e\u003cp\u003eThe handle is the part of a hose that gets used and abused: dropped on tile, dragged around door frames, and gripped hard for the whole clean. When the plastic cracks or the button lock stops holding, the wand starts pulling out of the handle mid-job, which is more aggravating than any suction problem.\u003c\/p\u003e\u003cp\u003eThis is a replacement for Plastiflex hoses only, so check the make of the hose rather than the make of the power unit. If your hose has a switched handle, the switch kit is a separate item.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457178841338,"sku":"HD400GPR02","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HD400GPR02_6adf2638-f843-4c71-a36f-18022cdf5e92.jpg?v=1785146396"},{"product_id":"switch-receptacle-kit-plastiflex-electric-hose-gas-pump-style-hdshcbezhr01","title":"Plastiflex Switch \u0026 Receptacle Kit - Gas Pump Style Electric Hose","description":"\u003cp\u003ePart HDSHCBEZHR01 is a switch and receptacle kit for the gas-pump-style handle on a Plastiflex electric central vacuum hose, built for the Eureka C4503170 and C4503171 and the equivalent Sanitaire C4503170 and C4503171 hoses.\u003c\/p\u003e\u003cp\u003eThe switch is what turns the power nozzle on and off from the handle, and the receptacle is where that circuit meets the wiring running down the hose. When either wears, the nozzle can cut out, run only in certain hose positions, or stop responding to the handle switch altogether.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e HDSHCBEZHR01, switch and receptacle kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Eureka C4503170, C4503171; Sanitaire C4503170, C4503171 gas-pump-style electric hoses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e puts working on-off control and a sound power link back at the handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e disconnect the hose from the wall box before you take the handle apart\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMake sure your hose uses the gas-pump-style grip before ordering, since the kit is cut for that handle shape and a different grip takes a different switch and receptacle. Comparing your own handle against the product photo is the quickest check there is.\u003c\/p\u003e\u003cp\u003eTest the switch several times before closing the handle back up, since a connection that feels solid while the shell is open can still be marginal once everything is reassembled and under tension. Catching that now saves opening the handle a second time.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457178906874,"sku":"HDSHCBEZHR01","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/HDSHCBEZHR01_be786481-4e99-4c20-9bf8-70689f8b151c.jpg?v=1785142166"},{"product_id":"low-voltage-switch-plastiflex-valuflex-series-kitswa620000400a","title":"Low Voltage Switch - Plastiflex Valuflex Series","description":"\u003cp\u003eThis replacement \u003cstrong\u003elow voltage hose switch\u003c\/strong\u003e restores on and off control to the handle of your Plastiflex Valuflex central vacuum hose, and is built for the Plastiflex 9309. It provides the reliable electrical switching that lets you start and stop the central unit right at the hose.\u003c\/p\u003e\u003cp\u003eWhen a hose switch stops activating the vacuum, or works only intermittently, the fault usually lies in the worn switch contacts. Fitting a matched replacement returns dependable control so the system responds every time you press it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex Valuflex 9309\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Low voltage on\/off switch for the hose handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e Reliable start and stop at the hose rather than the wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Disconnect the hose from the wall inlet before servicing the switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch the switch type to your hose model before ordering, since Plastiflex uses several. A correct switch brings back convenient, consistent control.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457213051130,"sku":"KITSWA620000400A","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/KITSWA620000400A_6a341bb8-3328-4e0f-a7d0-da3295b7433e.jpg?v=1785157357"},{"product_id":"plastiflex-direct-connect-grey-plug-4-wire-includes-cuff-kt130dcinst","title":"Plastiflex Direct Connect Grey Plug - 4-Wire (Includes Cuff)","description":"\u003cp\u003eThis replacement \u003cstrong\u003edirect connect grey plug\u003c\/strong\u003e is the four-wire hose-end fitting for Plastiflex central vacuum systems, supplied with its cuff and built for the Plastiflex 5701. It carries the electrical connection that lets the handle switch power the central unit and any powered floor tool. It also carries part #SH130DC-R01.\u003c\/p\u003e\u003cp\u003eWhen the plug's pins or wiring wear, the hose can lose its on and off control or switch only intermittently. Fitting a matched four-wire plug and cuff returns dependable power and switching through the hose.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex 5701\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e Four-wire direct connect grey plug, cuff included; also SH130DC-R01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e Reliable electrical connection and switch control at the hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Disconnect the hose from the wall inlet before servicing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch the plug type and wire count to your hose before ordering. A correct grey plug restores steady power and control to the system.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457213870330,"sku":"KT130DCINST","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/KT130DCINST_ba35b4a8-d0dc-4903-901d-e04179049292.jpg?v=1785146786"},{"product_id":"direct-connect-plug-plastiflex-4-wire-black-kt400dcinst","title":"Plastiflex 4-Wire Direct Connect Plug, Black","description":"\u003cp\u003eA power nozzle that keeps dropping out mid-pass, even though the vacuum itself starts fine, usually has a problem at the hose fitting rather than in the nozzle's own motor. Part KT400DCINST is the black plug Plastiflex builds for the machine end of its four-wire hoses, combining the pressure seal at the wall inlet with the small set of electrical pins a low-voltage system needs to run a powered head.\u003c\/p\u003e\u003cp\u003eA two-wire hose only switches the vacuum motor on and off, while a four-wire hose adds the extra pins a power nozzle draws from as it runs. The two configurations look similar enough at a glance to grab the wrong one, so counting the pins on the plug coming out is worth doing before ordering, since a plug that seats and seals in the inlet just fine can still leave a power nozzle without any of the current it needs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e KT400DCINST, black four-wire direct connect plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex direct connect central vacuum hoses built with the four-wire configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the housing has cracked, a pin shows burn or corrosion marks, or the fitting has stopped locking into the inlet\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eYanking a hose free of the wall instead of releasing the catch is the fastest way to loosen these connections from the inside, often with no mark left on the outer shell to give it away, so a plug that has stopped locking securely into the inlet deserves replacing on that symptom alone. Swapping the plug rather than the entire hose is the far cheaper repair whenever the hose body itself is still sound.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457213903098,"sku":"KT400DCINST","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/KT400DCINST.jpg?v=1785150929"},{"product_id":"dual-switch-harness-platiflex-valuflex-hose-ktswa6200023017","title":"Dual Switch Harness - Platiflex \/ Valuflex Hose","description":"\u003cp\u003eThis replacement \u003cstrong\u003edual switch harness\u003c\/strong\u003e is the internal wiring loom that carries both switch circuits through a Plastiflex or Valuflex central vacuum hose. It links the handle switches to the hose-end connector so you can control the central unit and a powered floor tool from the grip.\u003c\/p\u003e\u003cp\u003eWhen a harness wire breaks or its connections corrode, switching becomes intermittent or stops working, even though the hose itself looks fine. Fitting a fresh dual switch harness restores reliable control without replacing the whole hose.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex and Valuflex central vacuum hoses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Internal two-circuit switch wiring for the hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e Dependable handle control of the unit and power nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Disconnect the hose from the wall inlet before opening the handle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm your hose brand and switch layout before ordering, since harness wiring varies. A matched harness returns steady switching to your system.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457213935866,"sku":"KTSWA6200023017","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/KTSWA6200023017_72d46fb0-5ae3-466c-9dfb-cf13f530c646.jpg?v=1785155342"},{"product_id":"gray-crushproof-central-vacuum-hose-1-38-x-50-rf130138050pi","title":"Plastiflex Central Vacuum Hose - Gray, 1-3\/8\" x 50' Crushproof","description":"\u003cp\u003eThe Plastiflex \u003cstrong\u003ecrushproof central vacuum hose\u003c\/strong\u003e (Part #RF130138050PI) measures 1-3\/8 inches in diameter and stretches a full 50 feet for whole-home central vacuum systems. It carries suction from the wall inlet out to your cleaning tools across long runs.\u003c\/p\u003e\u003cp\u003eA standard hose kinks and flattens where it bends around furniture and doorways, which chokes airflow and leaves weak pickup at the end of the line. A crush-resistant wall holds the internal passage open under bending and foot traffic, so a fresh hose restores steady suction throughout the house.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e central vacuum systems using a 1-3\/8 inch hose connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e crush-resistant, kink-resistant gray hose, 50 feet long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e transfers suction from the wall inlet to the wands and attachments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e inspect the full length for cracks or soft spots if suction drops\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis replacement hose connects in place of your worn line and keeps its shape run after run. Confirm your system uses a 1-3\/8 inch hose before ordering to ensure a proper fit and full cleaning power.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457230614778,"sku":"RF130138050PI","price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/RF130138050PI_e8c138dc-e4b6-4376-a2d9-98dcd506aa2b.jpg?v=1785157552"},{"product_id":"replacement-hose-assembly-compact-electric-with-gas-pump-grip-sg130114007cll","title":"Replacement Hose Assembly - Compact Electric with Gas Pump Grip","description":"\u003cp\u003eThis replacement \u003cstrong\u003eelectric hose assembly\u003c\/strong\u003e (Part #SG130114007CLL) features a gas-pump-style grip and internal wiring that powers a motorized cleaning head or power nozzle. It delivers flexible reach for above-floor and hard-to-access cleaning.\u003c\/p\u003e\u003cp\u003eA hose cracks, kinks, or clogs with age, and once the wall gives way or the wiring frays, you lose suction or power to the nozzle. A sound replacement hose reconnects both the airflow and the electrical path so the whole system works again.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e electric hose assembly with a gas-pump grip and internal wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e restores suction and power to a motorized head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e flexible hose for above-floor and tight-space cleaning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e check the hose regularly for cracks, kinks, or loose end connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConnect it in place of the damaged hose at both the machine and the grip. Confirm the grip style and fittings match your system before ordering.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457248211194,"sku":"SG130114007CLL","price":112.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SG130114007CLL_b3d54631-c4ce-476c-9227-b559f22c4660.jpg?v=1785145799"},{"product_id":"plastiflex-pistol-grip-hose-switch-receptacle-4-wire-7-screw-sh130cbshr01","title":"Plastiflex Pistol Grip Hose Switch \u0026 Receptacle Assembly","description":"\u003cp\u003eThis \u003cstrong\u003epistol grip hose switch and receptacle assembly\u003c\/strong\u003e (Part #SH130CBSHR01) repairs the switch on Plastiflex pistol-grip swivel-style central vacuum hoses. The kit includes the switch, the female receptacle, and the wiring harness.\u003c\/p\u003e\u003cp\u003eThe switch and its wiring take constant flexing at the handle, and over time the contacts fail or the harness breaks, leaving the power nozzle without control. Rebuilding the switch and receptacle restores on and off control from the handle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Beam, Electrolux, Canavac, and Vacuflo hoses using the Plastiflex pistol-grip swivel design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e replacement switch, receptacle, and wiring harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e the handle is not included in the kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e disconnect the central vacuum system before doing any electrical work\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstall the components into your existing swivel handle to bring back reliable switching. Confirm your hose uses the Plastiflex pistol-grip swivel design before ordering.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457248375034,"sku":"SH130CBSHR01","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SH130CBSHR01_fbe56dda-e5c9-4076-b8bf-fc1467213ac7.jpg?v=1785142208"},{"product_id":"plastiflex-direct-connect-repair-kit-white-sh130dc-r01","title":"Plastiflex Direct Connect Repair Kit - White, 8' Cord with Cuff","description":"\u003cp\u003eThis \u003cstrong\u003edirect connect repair kit\u003c\/strong\u003e (Part #SH130DC-R01) supplies the replacement cord and cuff for white Plastiflex corded central vacuum hoses. It includes the 8-foot pigtail cord with its direct-connect plug and the hose cuff.\u003c\/p\u003e\u003cp\u003eThe pigtail cord at the wall end of a central vacuum hose takes repeated plugging and flexing until it frays or stops making a reliable connection. Replacing the cord and cuff restores a solid electrical connection without buying a whole new hose.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex Platinum Series corded central vacuum hoses, white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e replacement pigtail cord, direct-connect plug, and cuff\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e repairs a damaged hose end at a fraction of a full hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e replace when the wall-end cord is frayed or no longer connects reliably\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFit the new cord and cuff to the hose end for a dependable direct-connect fit. Match the color and Platinum Series design to your hose before ordering.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457248407802,"sku":"SH130DC-R01","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SH130DC-R01_35361165-946b-451e-9719-8f24182b2b94.jpg?v=1785153003"},{"product_id":"switch-plastiflex-low-voltage-hose-sh130efhr02","title":"Plastiflex Low-Voltage Switch Repair Kit - Pistol Grip Hose","description":"\u003cp\u003eThis is the low-voltage switch repair kit for a Plastiflex pistol grip swivel hose, part SH130EFHR02. It replaces the switch built into the grip that closes the low-voltage circuit and signals a central vacuum power unit to turn on.\u003c\/p\u003e\u003cp\u003ePlastiflex manufactures this 9302 series switch for use across several central vacuum brands rather than one, so it turns up in pistol-grip hoses badged for AirVac, Beam, NuTone, Vacuflo, M\u0026amp;S, and Wessel Werk. The hose housing and grip carry whichever brand name sold the system, but the switch mechanism itself is the same Plastiflex part underneath.\u003c\/p\u003e\u003cp\u003eWear on the internal contacts is what causes trouble here. A hose that needs to be squeezed or held at a certain angle before the unit responds, or one that will not start the unit at all while other hoses on the same system work fine, both point to this switch rather than anything at the wall inlet or power unit.\u003c\/p\u003e\u003cp\u003eNote how the existing wires are connected before removing the old switch, since matching that layout is what gets the new one working correctly. The grip handle itself is a separate part and is not included in this kit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e SH130EFHR02 low-voltage switch repair kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex pistol grip hoses used on AirVac, Beam, NuTone, Vacuflo, M\u0026amp;S, and Wessel Werk systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e replaces the low-voltage switch that starts the power unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e handle not included, note wiring positions before removing the old switch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457249259770,"sku":"SH130EFHR02","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SH130EFHR02.jpg?v=1785156743"},{"product_id":"pigtail-repair-kit-plastiflex-hose-6-ft-sh130r01","title":"Plastiflex Pigtail Repair Kit, 6 Ft","description":"\u003cp\u003eSH130R01 rebuilds the powered end of a Plastiflex central vacuum hose that uses a pigtail lead, six feet long. Rather than a full hose, it supplies what you need to redo that end without disturbing the length of hose you already own.\u003c\/p\u003e\u003cp\u003eThat coiled lead seats in the wall inlet, and it absorbs more abuse than any other section of the hose: pulled free at odd angles, stepped on, flexed thousands of times at the exact same two bends over years of use. Once it finally gives out, the power unit refuses to start from that inlet, although the hose body and handle both test fine on their own.\u003c\/p\u003e\u003cp\u003eRebuilding that end runs far cheaper than buying a whole new hose, which is the reason this repair exists as its own part. Shut off power to the unit before touching the low-voltage wiring at all, and lay the new lead alongside the old one first so you know how the two compare before anything comes apart.\u003c\/p\u003e\u003cp\u003eRule the rest of the system out before you order. If the unit also refuses to start from a second inlet, the trouble sits in the wiring back to the power unit rather than in this lead, and a new pigtail will change nothing. That check costs nothing and saves fitting a part that was never the problem.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e SH130R01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex central vacuum hoses with a pigtail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the power unit won't start from the inlet but the hose tests fine otherwise\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457249325306,"sku":"SH130R01","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SH130R01_ffe717e3-be2d-4850-9001-ebd1ae3400ff.jpg?v=1785137958"},{"product_id":"plastiflex-valuflex-central-vacuum-hose-handle-grip-with-switch-receptacle-sh130vfsh01","title":"Plastiflex ValueFlex Central Vacuum Hose Handle with Switch","description":"\u003cp\u003eThis \u003cstrong\u003eValueFlex hose handle assembly\u003c\/strong\u003e (Part #SH130VFSH01) is a Plastiflex handle with an integrated switch for the ValueFlex line of central vacuum hoses. The built-in switch puts on and off control right at your grip.\u003c\/p\u003e\u003cp\u003eA cracked handle or a failed handle switch makes a hose awkward to hold and takes away convenient power control. A fresh handle assembly restores a secure, comfortable grip and reliable switching from the hose itself.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex ValueFlex dual-voltage central vacuum hoses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e hose handle with an integrated on and off switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e a comfortable grip and control at the handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e this assembly is made specifically for the ValueFlex line, so confirm your hose before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstall it in place of the worn handle to bring back easy control and a secure hold. Verify your hose is a ValueFlex dual-voltage model for a proper fit.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457249358074,"sku":"SH130VFSH01","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SH130VFSH01_031b9da0-2764-410d-8275-75a9d01c3784.jpg?v=1785142526"},{"product_id":"pigtail-repair-kit-plastiflex-black-6-ft-sh400-r01","title":"Plastiflex Pigtail Repair Kit - Black, 6 Ft","description":"\u003cp\u003eSH400-R01 rebuilds the pigtail on a Plastiflex central vacuum hose in black, sized for a 6-foot cord. The pigtail is that curled lead running from the hose into the wall inlet, and across the whole hose assembly it is the section that tends to give out first.\u003c\/p\u003e\u003cp\u003eEvery time the plug comes out of the inlet at an angle, or the coil gets dragged across a doorway threshold, the wires inside flex at the same couple of spots. Do that enough times and the conductors fatigue, so the unit starts and stops on its own, drops out whenever the hose gets bumped or repositioned, or simply quits answering the inlet while the rest of the hose still checks out fine.\u003c\/p\u003e\u003cp\u003eBecause the hose body itself is usually undamaged when this happens, rebuilding just the powered end makes more sense than swapping the whole hose. Pick the color and cuff style that matches what you already have, black in this case, so the repaired lead seats and looks the way the original did. Cut power at the unit first.\u003c\/p\u003e\u003cp\u003eAfter the new pigtail goes on, plug and unplug the hose at the inlet several times before treating the repair as finished, watching for a clean start on every attempt rather than just the first one. A start that hesitates on a later try usually means the connection needs another look before the hose goes back into daily use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e SH400-R01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex central vacuum hoses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e black, 6 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the vacuum starts and stops on its own or won't respond at the inlet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457249390842,"sku":"SH400-R01","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SH400-R01_bc2de3d5-92d7-41e5-862e-dc5c4b188064.jpg?v=1785142672"},{"product_id":"direct-connect-repair-kit-plastiflex-black-sh400dc-r01","title":"Direct Connect Repair Kit - Plastiflex, Black","description":"\u003cp\u003eThis \u003cstrong\u003edirect connect repair kit\u003c\/strong\u003e (Part #SH400DC-R01) supplies the replacement cord and cuff to repair the wall end of a black Plastiflex corded central vacuum hose. It fits the Plastiflex 5707 hose.\u003c\/p\u003e\u003cp\u003eThe pigtail cord where the hose plugs into the wall inlet frays and loosens with repeated use, which shows up as lost power to the nozzle or an unreliable connection. Fitting a new cord and cuff restores a solid direct-connect link without replacing the entire hose.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex 5707 corded central vacuum hose, black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e replacement pigtail cord and cuff\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e repairs a damaged hose end economically\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e a white version is offered as part #SH130DC-R01\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAttach the new cord and cuff to the hose end for a secure connection. Confirm your hose color and model before ordering to match the kit.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457249456378,"sku":"SH400DC-R01","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SH400DC-R01_d4a8b584-c9e6-42ec-a02d-dcca84c5c4fa.jpg?v=1785145225"},{"product_id":"low-voltage-switch-harness-kit-platiflex-pistol-grip-shsgezhr01","title":"Plastiflex Pistol Grip Hose Low-Voltage Switch \u0026 Harness Kit","description":"\u003cp\u003ePart SHSGEZHR01 rebuilds the low-voltage circuit built into a Plastiflex pistol grip hose handle, pairing a fresh switch with the wiring harness it connects to so both halves of that circuit go in together.\u003c\/p\u003e\u003cp\u003eThat switch takes a beating simply from normal use, since every single pass with the hose means pressing it at least once to start the unit and once to stop it. The contacts wear down with that repetition, and the wiring in the harness fatigues under the same repeated flexing. Eventually the vacuum needs coaxing to start, shuts off on its own partway through a room, or stops answering the handle switch entirely even though the wall inlet switch still starts it fine.\u003c\/p\u003e\u003cp\u003eReplacing the switch on its own rarely holds, because a fresh switch wired onto a harness that is already chafed tends to fail again soon after, which is why the two ship together. Cut power at the unit before opening the handle. While it is apart, look the grip housing over for cracks, since a housing that no longer closes tightly around the new switch and harness lets them work loose again, and note how the old wiring was routed before you disconnect anything so the replacement goes back the same way.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e SHSGEZHR01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex pistol grip hose, central vacuum style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e low-voltage switch and harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the handle switch is unresponsive or intermittent but the inlet switch still starts the unit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457249489146,"sku":"SHSGEZHR01","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SHSGEZHR01_a2f0412e-7729-4179-aabd-3becb7af1d08.jpg?v=1785157983"},{"product_id":"plastiflex-new-construction-mounting-plate-sv8001","title":"Plastiflex New Construction Mounting Plate","description":"\u003cp\u003ePart SV8001 sets a wall inlet location during framing, before drywall covers the stud bay, so the future inlet valve has a properly positioned, structurally solid point to mount to. It is compatible with Plastiflex 0650.\u003c\/p\u003e\u003cp\u003eFraming stage is the cheap stage. Get the plate positioned at the wrong height or off the stud line now and it is a five-minute correction; catch the same mistake after the walls are finished and it means cutting drywall open again. The plate also squares up the piping connection behind it, which keeps the tubing run aligned as the rest of the system goes in around it.\u003c\/p\u003e\u003cp\u003eEvery fitting downstream depends on a sealed joint here just as much as anywhere else in the network: solvent-weld the plate to the system's PVC pipe so the connection holds air the way the rest of the run does, since one leak point here undercuts suction at the finished inlet no matter how well everything else is installed. Confirm the plate matches Plastiflex 0650 before framing around it.\u003c\/p\u003e\u003cp\u003eMark the plate's location on the framing before insulation goes in, and photograph the rough piping layout for reference. Once drywall covers the stud bay, the mounting plate becomes the only visible clue to where the inlet valve needs to land, and a missing record is the most common reason a finish crew ends up guessing at placement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e SV8001, Plastiflex new construction mounting plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex 0650 central vacuum systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e rough-in anchor point for a future wall inlet, set before drywall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e solvent-weld to standard central vacuum pipe for an airtight joint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457250963706,"sku":"SV8001","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SV8001_5e60ec9e-9d59-4993-bff2-93f20ebcb2f9.jpg?v=1785142725"},{"product_id":"plastiflex-inlet-valve-with-round-door-white-sv8016","title":"Plastiflex Inlet Valve with Round Door - White","description":"\u003cp\u003ePart SV8016 is the white Plastiflex inlet valve built in the round door style, supplied with its mounting screws. It is the wall end of a central vacuum system, the fitting a hose cuff plugs into and the door that closes the pipe off again once the hose comes out.\u003c\/p\u003e\u003cp\u003eA door that has gone brittle, discolored, or stopped latching leaks air continuously. Because every inlet shares one pipe network, that leak shows up as weak suction throughout the house rather than only in the room where the bad valve sits, so walking the house and checking each door for a firm close is the quick way to find it.\u003c\/p\u003e\u003cp\u003eCentral vacuum inlets have been built to more than one door shape and screw spacing over the years. Hold this valve's round door and hole pattern against the one on your wall before ordering, since a mismatch will not sit correctly in a box that was cut for something else. Measure the opening in the wall box itself as well, not only the plate that covers it.\u003c\/p\u003e\u003cp\u003eIf your existing inlet has low voltage wires landed on it, photograph the terminals before unscrewing it and land the new valve the same way. That wiring step is where this job usually goes wrong, not the mounting.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e SV8016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoor:\u003c\/strong\u003e round style, closes flush when the hose is unplugged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e compare door shape and screw spacing against your existing inlet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457250996474,"sku":"SV8016","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SV8016_4e9e9077-0cca-441c-b239-b47b9113e82b.jpg?v=1785143996"},{"product_id":"plastiflex-cv-vex-r-inlet-valve-white-round-door-sv8026","title":"Plastiflex CV-VEX-R Inlet Valve - White, Round Door","description":"\u003cp\u003eThe Plastiflex CV-VEX-R inlet valve in white with a round door is a replacement wall inlet for central vacuum systems. This is the fitting you actually touch every time you vacuum: lift the spring-loaded door, plug in the hose, and the central vacuum system activates automatically so you can begin cleaning in that room.\u003c\/p\u003e\u003cp\u003eWhen not in use, the door closes flush with the wall, keeping the inlet unobtrusive and sealed. Cracked doors, tired springs, and inlets that no longer open properly are the usual reasons to replace one, and this valve is designed for easy installation in a standard mounting.\u003c\/p\u003e\u003cp\u003eThe white finish suits most trim and wall colors. The same round-door valve is also offered in almond for homes with warmer paint tones, so you can match inlets throughout the house.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457251062010,"sku":"SV8026","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SV8026_38d91a63-310d-4f7f-a59a-d4bf2abd26ec.jpg?v=1785150925"},{"product_id":"plastiflex-cv-vex-r-inlet-valve-almond-round-door-sv8030","title":"Plastiflex CV-VEX-R Inlet Valve - Almond, Round Door","description":"\u003cp\u003eThe Plastiflex CV-VEX-R inlet valve in almond with a round door is a replacement central vacuum wall inlet finished to blend with warmer wall colors and older trim. Functionally it works like any VEX inlet: connect the hose and the system starts automatically, remove it and the spring-loaded door swings shut flush against the wall.\u003c\/p\u003e\u003cp\u003eInlet valves see years of daily use, and eventually a door cracks, the spring loses tension, or the inlet stops opening and closing cleanly. Swapping in a new valve is an easy repair that restores both the seal and the convenient plug-in connection point in that room.\u003c\/p\u003e\u003cp\u003eThe valve is designed for easy installation on standard central vacuum systems. If your walls are white or cool-toned, the same round-door valve is available in a white finish as well.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457251717370,"sku":"SV8030","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SV8030_a5d35b2c-3a14-4212-8dfb-41c0461a4bd5.jpg?v=1785152525"},{"product_id":"90-degree-sweep-elbow-plastiflex-central-vacuum-sv8042","title":"Plastiflex 90-Degree Sweep Elbow - Central Vacuum Tubing","description":"\u003cp\u003eA ninety degree sweep elbow redirects a central vacuum's PVC tubing run a full quarter turn without resorting to a sharp corner, and that wide, gradual bend is what separates a sweep fitting from an ordinary right-angle joint.\u003c\/p\u003e\u003cp\u003eThe wide radius earns its keep because dirt and debris are moving fast when they hit a bend, and a broad curve lets that material ride around the turn rather than smack into a tight corner, which is usually where a clog first takes hold on a long run. As with every fitting in the system, this joint has to be airtight, since one leaking connection is felt as weaker suction at every inlet sharing that run.\u003c\/p\u003e\u003cp\u003eThis is the Plastiflex SV8042, confirmed compatible with the Sirena 6201 central vacuum system. Cement the joints with solvent cement made for vacuum-grade PVC fittings, and dry-fit the full run of pipe and fittings before cementing any joint permanently.\u003c\/p\u003e\u003cp\u003eA sweep elbow takes up noticeably more physical space inside a wall or joist bay than a short-radius fitting does, so measure the cavity before committing to this part for a tight corner. Where the framing genuinely will not allow the wider sweep, a compact elbow is the right substitute, but the sweep design is the better choice for airflow anywhere the space allows it. Test-fit the fitting in the framing cavity dry, before cutting your tubing to final length, so a tight space is caught while there is still room to adjust the layout.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e SV8042\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Sirena 6201 central vacuum system; standard central vacuum PVC tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 90-degree gradual sweep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e redirects the tubing run a full quarter turn without a sharp corner\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457251782906,"sku":"SV8042","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SV8042_c35a526a-04d0-4415-976a-343058d43723.jpg?v=1785153929"},{"product_id":"plastiflex-central-vacuum-elbow-short-90-sv8052","title":"Plastiflex Central Vacuum Elbow - Short 90 Degree","description":"\u003cp\u003eThis Plastiflex short 90-degree elbow makes a right-angle turn in central vacuum tubing within minimal depth, the fitting installers reach for wherever a full-radius sweep elbow has no room to fit inside a tight stud bay behind an inlet valve.\u003c\/p\u003e\u003cp\u003eA tighter turn radius means more resistance to airflow and a greater chance debris hangs up in the bend, so this elbow earns its place only where space forces the issue. Most installers reserve it for the last connection directly behind an inlet and switch to sweep elbows for every other turn along the run, wherever there is room for the gentler curve.\u003c\/p\u003e\u003cp\u003eHowever it is used, the joint has to be airtight. Central vacuum performance depends on every fitting in the run holding its seal, since a leak at one elbow bleeds suction from every inlet in the house. Solvent-weld or slip-fit the connection as your piping calls for, and confirm the fitting matches your system's tubing diameter before cutting into the wall.\u003c\/p\u003e\u003cp\u003eEvery direction change in a tubing run costs some airflow, and a tight-radius elbow like this one costs more than a gentle sweep does. On a run with several turns already planned, keep the count of short elbows to the minimum the space actually requires, and make up the difference with sweep fittings anywhere the stud bay has room for them.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e SV8052, Plastiflex short 90-degree elbow, white finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e tight-radius direction change where a full sweep elbow will not fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest placement:\u003c\/strong\u003e the last bend directly behind an inlet valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e solvent-weld or slip-fit per your tubing type, airtight joint required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457252667642,"sku":"SV8052","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SV8052_bbf9d2aa-9df5-4583-b5f0-a996531400d5.jpg?v=1785157838"},{"product_id":"45-degree-sweep-elbow-plastiflex-central-vacuum-sv8056","title":"Plastiflex 45-Degree Sweep Elbow - Central Vacuum Tubing","description":"\u003cp\u003eA forty-five degree sweep elbow changes the direction of a central vacuum's PVC tubing run gradually rather than sharply, which matters more than it sounds like it should. Debris travels through the pipe at high speed, and a gentle sweep lets it ride around the bend instead of slamming into a hard corner where clogs tend to start.\u003c\/p\u003e\u003cp\u003eLong trunk-line runs often use a pair of forty-five degree elbows together to work pipe around a joist, a doorway, or some other obstruction, and that combination handles the detour more gently than a single ninety-degree turn would, without introducing the turbulence a sharp angle creates. Every joint in the system also has to be airtight, since even one leaking fitting is felt as reduced suction at every inlet on that run, not just the nearest one.\u003c\/p\u003e\u003cp\u003eThis is the Plastiflex SV8056, a fitting confirmed compatible with the Sirena 6201 central vacuum system. Use PVC solvent cement rated for central vacuum fittings, and dry-fit your run before committing any joint to cement.\u003c\/p\u003e\u003cp\u003ePairing two forty-five degree elbows to make an offset around an obstruction is generally a better choice than a single ninety where the space allows it, since the combined bend keeps the airstream moving in a gentler curve overall. Keep the two elbows close enough together that the short straight section between them does not become its own collection point for debris. Support the tubing on either side of the fitting before the cement sets, since an unsupported elbow can sag slightly out of alignment while the joint cures and leave a stress point once it hardens.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e SV8056\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Sirena 6201 central vacuum system; standard central vacuum PVC tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 45-degree gradual sweep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e routes tubing around obstacles while keeping airflow smooth\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457252733178,"sku":"SV8056","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SV8056_f00d3502-c705-432b-b08d-85bd94503b9f.jpg?v=1785153906"},{"product_id":"elbow-plastiflex-45deg-spigot-sv8060","title":"Plastiflex 45-Degree Spigot Elbow","description":"\u003cp\u003ePart SV8060 is a 45-degree spigot elbow for standard central vacuum piping, built by Plastiflex. The spigot end fits straight into the next fitting's hub without a separate coupling piece, which keeps the joint count down in the crowded runs that tend to show up between joists or behind a finished wall where clearance is at a premium.\u003c\/p\u003e\u003cp\u003eA 45-degree bend does less to the airflow than a 90-degree turn does, which is why installers favor it wherever a run needs to change direction but does not need a hard right angle. Two 45s can also replace a single 90 on a long run to spread the direction change over more distance and keep airflow moving more freely through the turn, which can make a noticeable difference on a longer branch line feeding several inlets.\u003c\/p\u003e\u003cp\u003eBond spigot-to-hub connections with PVC cement, or use a slip fit if your system's fittings call for it, and take care to seat each joint fully before the cement sets. A central vacuum system is only as reliable as its weakest joint, and a properly seated elbow at every turn helps keep suction steady at each inlet throughout the house.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e SV8060\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e standard central vacuum piping; match your system's fittings before ordering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e spigot end, seats into adjacent fitting's hub\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt suits both new installations and repair work where an existing 45-degree turn needs to be reopened and rebuilt from scratch. Keep the spigot end clean and free of old cement residue if you are reusing an adjacent fitting, since a rough hub surface can keep the joint from seating fully home.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457252765946,"sku":"SV8060","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SV8060_d52858a2-6ddd-4ba4-856f-8f9d6178ac04.jpg?v=1785139306"},{"product_id":"stop-coupling-2-plastiflex-central-vacuum-sv8062","title":"Plastiflex Stop Coupling - 2 Inch Central Vacuum Pipe","description":"\u003cp\u003eThe Plastiflex SV8062 stop coupling joins two lengths of 2-inch-outside-diameter central vacuum pipe end to end, with a molded internal ridge that stops either pipe from sliding too far into the fitting. That ridge is what separates it from a plain slip coupling: both pipe ends land at the same seated depth every time, so the joint lines up consistently whether one installer does it once or fifty times on a job.\u003c\/p\u003e\u003cp\u003eThis fitting turns up on nearly every central vacuum job, lengthening a straight section, splicing a damaged span back together, or tying a new pipe run into an existing network already behind the walls. Each joint it forms is also a place suction can leak out if the cement job gets rushed, so a coupling that seats the same way every time makes for a more dependable seal than one an installer has to eyeball into position.\u003c\/p\u003e\u003cp\u003eIt is sized for pipe at the 2-inch outside-diameter standard, the dimension most residential systems are built around. Dry-fit the run before cementing, then solvent-weld both ends so the joint stays airtight for the life of the system.\u003c\/p\u003e\u003cp\u003eBecause the internal stop is molded into the fitting, there is no need to measure or mark an insertion depth the way a plain slip coupling sometimes requires. That built-in consistency matters most on a job with several couplings going in back to back, where a missed depth on even one joint can throw off the alignment of everything downstream of it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e SV8062, Plastiflex stop coupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2-inch outside-diameter central vacuum pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e internal stop seats both pipe ends to a consistent depth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e dry-fit, then solvent-weld for a permanent airtight joint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457252831482,"sku":"SV8062","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SV8062_9468d643-1552-4c07-9cd7-0e4bf93cb8c4.jpg?v=1785137723"},{"product_id":"plastiflex-mounting-plate-with-vex-fitting-sv8201","title":"Plastiflex Mounting Plate with VEX Fitting","description":"\u003cp\u003eThe Plastiflex SV8201 mounting plate with VEX fitting is a central vacuum wall inlet assembly that combines the mounting plate and pipe connection in one piece. It provides the connection point where you insert the hose to activate the system and begin cleaning in any room of the home.\u003c\/p\u003e\u003cp\u003eA wall inlet should open and close smoothly and trigger the vacuum the moment the hose seats. If an existing inlet is cracked, will not open properly, or fails to activate the system, replacing the assembly restores full functionality without disturbing the piping behind the wall any more than necessary.\u003c\/p\u003e\u003cp\u003eStandard installation fits most central vacuum piping systems, and the plate is compatible with Plastiflex model 0610. Match it to your existing valve style before ordering so the finished inlet sits flush and seals correctly.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457252864250,"sku":"SV8201","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SV8201_6ea3a24a-0307-4486-93c8-b3a8634e4375.jpg?v=1785144454"},{"product_id":"plastiflex-cv-vex-s-inlet-valve-white-sv8228","title":"Plastiflex CV-VEX-S Inlet Valve and Cover - White, Square Face","description":"\u003cp\u003eThe Plastiflex CV-VEX-S mounts as a central vacuum wall inlet, its cover finished in white with a squared plate around a hinged round door, sitting flush and low-profile against most wall colors and trim. It is the point where the hose connects, and replacing a worn one is one of the more direct ways to restore lost suction at that inlet.\u003c\/p\u003e\u003cp\u003eInlet doors take more daily wear than most owners expect. Every time a hose goes in, the door flexes on its hinge and the gasket around the opening compresses a little more. Eventually the door stops closing flush, the gasket no longer seals, and the inlet bleeds air the moment it is not in active use, which quietly drags down suction at every other inlet on the same line.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: mount the valve to the wall box, connect it into the tubing run, and the assembly is ready to accept a hose. Because inlet valve dimensions vary between central vacuum brands, check the mounting pattern against your existing wall box before ordering a replacement.\u003c\/p\u003e\u003cp\u003eWhile the old valve is off the wall, check the gasket between the valve body and the wall box as well as the door gasket itself, since both seals contribute to how tightly the assembly holds air. A fresh valve mounted over a hardened wall-box gasket will still leak, even though the new hardware is doing its job correctly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e SV8228, Plastiflex CV-VEX-S wall inlet and cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e white, square face plate with round door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the door no longer closes flush or the gasket has hardened and stopped sealing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e wall connection point for the vacuum hose\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457252929786,"sku":"SV8228","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SV8228_25bd2013-04f5-4d3f-9f4d-aefd710a1e77.jpg?v=1785143907"},{"product_id":"plastiflex-cv-vex-s-inlet-valve-almond-sv8232","title":"Plastiflex CV-VEX-S Inlet Valve - Almond","description":"\u003cp\u003ePart SV8232 is a CV-VEX-S style central vacuum wall inlet finished in almond to match warmer trim colors. It gives a room its plug-in connection point, closed off by a spring-loaded door when no hose is plugged in.\u003c\/p\u003e\u003cp\u003eInlets crack at the door hinge or the mounting ears from repeated use, and a worn seal around the plug lets the door sit loose instead of flush. Once the housing is cracked or the door will not close fully, the inlet needs to be swapped rather than patched.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e SV8232, CV-VEX-S inlet valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e almond\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e spring-loaded door, activates the system when a hose is plugged in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e confirm your system uses the VEX-S inlet style before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation is a straightforward swap at the wall box, using the same mounting screws already in place. Matching the almond finish across a house is also a reason people replace an inlet that still works, and it is a quick way to make every inlet look consistent again.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457252962554,"sku":"SV8232","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SV8232_cf76a396-30e8-4eb6-8179-04322c9f4d82.jpg?v=1785152712"},{"product_id":"plastiflex-dual-switch-cp-hose-assembly-with-pigtail-gas-grip-30-ft-sz130138030bcun","title":"Plastiflex 30 ft Electric Hose - Gas Pump Handle, Pigtail, Dual Switch","description":"\u003cp\u003eFitted with a gas pump-style handle, the \u003cstrong\u003ePlastiflex 30-Foot Electric Hose\u003c\/strong\u003e (Part #SZ130138030BCUN, model 1133) carries suction and switch power across most central vacuum systems. The handle combines a dual switch with a pigtail cord and a button lock that holds the wand securely during cleaning.\u003c\/p\u003e\u003cp\u003eA hose that leaks at a cracked cuff or has a worn handle switch loses airflow and can drop power to the nozzle mid-clean. This 30-foot replacement reseals the run and returns firm, consistent suction from the inlet to the tools.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e most systems including Beam, Nutone, and Vacuflow; Plastiflex 1133\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e gas pump handle with dual switch, pigtail cord, and button-lock wand connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e secure tool grip and dependable powerhead switching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e confirm the pin sits 1.25 inches from the edge of the roughly 3-inch steel tube before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt also replaces parts #SZ130114030BCUG and #SV130114030BCUI, so match your fitting and install it as a direct swap.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457253290234,"sku":"SZ130138030BCUN","price":159.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SZ130138030BCUN_c9eeece5-0000-4525-a24c-628f34e38638.jpg?v=1785149302"},{"product_id":"gray-hose-cv-direct-connect-30-crushproof-plastiflex-sz130138030bdun","title":"Plastiflex 30' Direct Connect Central Vacuum Hose Assembly - Gray Crushproof","description":"\u003cp\u003eEngineered for 120-volt direct-connect systems, the \u003cstrong\u003ePlastiflex 30-Foot Direct Connect Hose Assembly\u003c\/strong\u003e (Part #SZ130138030BDUN, model 1136) uses integrated electrical contacts that mate with direct-connect wall inlets, so no separate power cord is needed. The 1-1\/4-inch gray crushproof body holds suction across the full length.\u003c\/p\u003e\u003cp\u003eOnce a direct-connect hose cracks or its contacts wear, you lose both airflow and reliable power to the nozzle. This replacement restores a sealed airway and a clean electrical handoff so the powerhead runs whenever you switch it on.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 120-volt direct-connect systems with supervalve-style inlets; Plastiflex 1136\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e gas pump handle with three-position switch for off, main unit, and main unit plus power nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 1-1\/4-inch gray crushproof hose with a curved button-lock wand included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e confirm your inlets are the supervalve style before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt also replaces part #CBEZ138030DC, making it a direct fit for whole-home cleaning.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457253323002,"sku":"SZ130138030BDUN","price":156.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SZ130138030BDUN.jpg?v=1785156135"},{"product_id":"cp-with-pigtail-hose-assembly-plastiflex-35-dual-switch-sz130138035bcui","title":"Plastiflex 35' Dual Voltage Crushproof Central Vacuum Hose with Pigtail Cord","description":"\u003cp\u003eThe \u003cstrong\u003ePlastiflex 35-Foot Dual Voltage Crushproof Hose\u003c\/strong\u003e (Part #SZ130138035BCUI, model 1130) is an OEM replacement built for whole-home central vacuum cleaning. Its gas pump-style handle carries a pigtail cord, a dual switch, and an integrated airflow regulator for one-handed control, while a button-lock metal connector holds tools firmly.\u003c\/p\u003e\u003cp\u003eA hose that has stiffened, split, or lost switch response makes cleaning harder and can interrupt power to the nozzle. Swapping in this crushproof 1-3\/8-inch assembly restores full suction, smooth handling, and reliable low-voltage switching.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e central vacuum systems using a 35-foot dual-voltage pigtail hose; Plastiflex 1130\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e dual switch with airflow regulator and a button-lock metal tool connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e crushproof 1-3\/8-inch body with low-voltage activation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e match your wall cord and connection before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs an OEM-grade assembly, it installs as a direct replacement and brings the system back to dependable performance.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457253421306,"sku":"SZ130138035BCUI","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SZ130138035BCUI_6734097d-201e-4115-9681-6b156b317624.jpg?v=1785142509"},{"product_id":"plastiflex-direct-connect-hose-central-vacuum-35-ft-sz130138035bdui","title":"Plastiflex 35 ft Direct Connect Dual Voltage Hose - 3-Way Switch","description":"\u003cp\u003eMade for electrified inlets, the \u003cstrong\u003ePlastiflex 35-Foot Direct Connect Dual Voltage Hose\u003c\/strong\u003e (Part #SZ130138035BDUI, model 1143) is a lightweight, crushproof hose with a 3-way switch for cleaning with or without the powerhead. The gas pump handle carries a direct-connect wall-end coupling sized for supervalve inlets, and the hose runs both 24-volt and 120-volt.\u003c\/p\u003e\u003cp\u003eA cracked body or worn coupling contacts cost you suction and steady nozzle power. This light gray 1-1\/4-inch replacement reseals the run and restores a clean electrical connection to the powerhead.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e central vacuum systems with electrified supervalve inlets; Plastiflex 1143\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e 3-position switch for off, main unit, and main unit plus power nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e crushproof 1-1\/4-inch body with a curved button-lock wand, made in North America\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e this hose is for electrified inlets only\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt also replaces parts #SZ130114035BDI and #BI-4336-1, so confirm your coupling before ordering.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457253585146,"sku":"SZ130138035BDUI","price":170.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/SZ130138035BDUI_705df244-b0d0-4b4b-b735-b690a5e0b418.jpg?v=1785141211"},{"product_id":"ivory-central-vacuum-pan-plastiflex-vcpa01","title":"Plastiflex VacPan Automatic Dustpan - Ivory","description":"\u003cp\u003eThe Plastiflex VacPan, part VCPA01, mounts into a cabinet's kick space and ties directly into a central vacuum system, turning that low gap into a built-in dustpan. Sweep debris over to it, press the toe-touch pad with your foot, and everything vanishes down into the piping, no dustpan to carry to the trash and empty afterward.\u003c\/p\u003e\u003cp\u003eIt is a popular upgrade in a kitchen, mudroom, workshop, or any space with hard flooring where a broom sees regular use during the week. The unit is sized for a standard cabinet kick space and finished in ivory to suit light cabinetry, and it ships without a trim plate, so budget for that separately if the opening needs one to look finished.\u003c\/p\u003e\u003cp\u003eThis VacPan suits built-in whole-house vacuum setups broadly rather than one power unit brand specifically, since a kick-space dustpan ties into the piping network itself rather than to any single manufacturer's inlet hardware. Measure your cabinet kick space against the unit's dimensions before you cut an opening for it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e VCPA01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e ivory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e mounts in a cabinet kick space, ties into central vacuum piping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e toe-touch switch activates the system\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA trim plate is sold separately, so check the finished opening dimensions against your cabinetry before you commit to cutting the kick space. Once it is in, most households find the toe-touch habit takes over for sweeping small debris almost immediately, since there is no dustpan to fetch and no bag or bin at that spot to empty, and it tends to get used far more often than a stand-alone dustpan ever did.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457264431354,"sku":"VCPA01","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/VCPA01_5e2354de-51b1-4c52-a8a2-2a7829efbca8.jpg?v=1785144080"},{"product_id":"almond-repair-kit-plastiflex-vacuum-pan-vcpar01","title":"Almond Repair Kit - Plastiflex Vacuum Pan","description":"\u003cp\u003eThe \u003cstrong\u003eAlmond Plastiflex Vacuum Pan Repair Kit\u003c\/strong\u003e (Part #VCPAR01) is a replacement mounting pan for a Plastiflex central vacuum wall inlet, finished in almond to match existing hardware. The vacuum pan is the rough-in mounting point that holds the inlet valve in the wall and ties it to the tubing behind it.\u003c\/p\u003e\u003cp\u003eWhen the pan cracks or its mounting ears strip, the inlet valve loosens in the wall and the connection to the tubing can leak air. Fitting this repair kit restores a solid, sealed mounting point so the inlet sits firm and the system holds suction.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex central vacuum wall inlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e almond mounting pan repair kit, Part #VCPAR01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e anchors the inlet valve and joins it to the wall tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e restores a firm, air-tight inlet mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFit the pan into the wall opening and secure the inlet valve to it, checking that the tubing connection is sealed. Match the almond finish to your existing inlets before ordering.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457264464122,"sku":"VCPAR01","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/VCPAR01_96d946cb-0f54-4150-bdbb-486f47dd9701.jpg?v=1785149089"},{"product_id":"black-central-vacuum-pan-plastiflex-vcpb01","title":"Plastiflex Black Central Vacuum Pan - VacPan Toe-Kick Sweep Inlet","description":"\u003cp\u003ePlastiflex builds this VacPan as a sweep-activated inlet, sized to sit low in a kickboard or baseboard rather than mounted as a valve up on the wall like the rest of a central vacuum's inlets. Part VCPB01 is finished in black and wires into the same trunk line and piping network the rest of the system already uses.\u003c\/p\u003e\u003cp\u003eThe idea behind a pan like this is skipping a hand-held dustpan on the floors that collect grit every single day. Push the pile toward the opening along the floor, tap the pan with your foot or the side of a broom, and the system pulls the debris away the instant the door releases. There is no stooping down, no carrying a full dustpan across the room, and no dumping one container's contents into another.\u003c\/p\u003e\u003cp\u003eManufacturer compatibility data lists this pan for central vacuum installations built on standard inlet piping, so it pairs with the trunk line and fittings already common across residential systems rather than one specific power unit brand. Kitchens, entryways, mudrooms, and workshop floors are where a pan like this earns its keep, since those rooms get swept far more often than the rest of the house.\u003c\/p\u003e\u003cp\u003eBecause the opening sits inside finished cabinetry or a baseboard cavity, plan for this during new construction or a remodel while the wall or toe-kick is still open. An installer, or a DIYer comfortable cutting into and working behind cabinetry, can set the pan and run the short connecting pipe back to the trunk line.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e VCPB01, Plastiflex VacPan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e central vacuum systems with standard inlet piping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e foot-activated sweep inlet set into a kickboard or baseboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457264595194,"sku":"VCPB01","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/VCPB01_8c4d7398-e3fd-45a4-af95-801b70599b3e.jpg?v=1785139645"},{"product_id":"black-repair-kit-plastic-vacuum-pan-vcpbr01","title":"Black Repair Kit - Plastic Vacuum Pan","description":"\u003cp\u003eThis \u003cstrong\u003eBlack Plastic Vacuum Pan Repair Kit\u003c\/strong\u003e (Part #VCPBR01) is a replacement mounting pan for a central vacuum wall inlet, molded in black. The vacuum pan serves as the rough-in mount that holds the inlet valve in the wall and connects it to the tubing behind it.\u003c\/p\u003e\u003cp\u003eA pan that has cracked or whose mounting ears have stripped lets the inlet valve work loose and can leak air at the tubing joint, costing suction at the hose. Installing this repair kit rebuilds a secure mounting point so the inlet stays fixed and the connection stays sealed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e central vacuum wall inlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e black plastic mounting pan repair kit, Part #VCPBR01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e anchors the inlet valve and joins it to the wall tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e restores a firm, air-tight inlet mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSet the pan into the wall opening, fasten the inlet valve to it, and confirm the tubing joint is sealed before closing up. Verify the black finish suits your inlets before ordering.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457264660730,"sku":"VCPBR01","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/VCPBR01_f8c3098a-ffc0-4224-959b-539bfdf54400.jpg?v=1785142278"},{"product_id":"white-central-vacuum-pan-plastiflex-vcpw01","title":"Plastiflex White Central Vacuum Pan","description":"\u003cp\u003ePlastiflex built part VCPW01 as a white, flush-mount sweep pan for central vacuum systems that use standard inlet piping. Set low into a cabinet base or near the floor along a wall, the pan lets you brush debris straight into the pipe network instead of bending down with a dustpan every time the kitchen floor needs a quick pass.\u003c\/p\u003e\u003cp\u003eOpen the release panel with a nudge and that spot on the floor connects to the same suction that feeds every wall valve in the house, since the pan ties into the same tubing run rather than running on its own separate line. Kitchens see the heaviest daily use, though a laundry room, mudroom, or workshop floor benefits just as much from a sweep-in point at ankle height, especially in a household that sweeps more often than it hauls out a full vacuum.\u003c\/p\u003e\u003cp\u003eGetting the pipe drop to that low, tight spot is the real planning question, not the pan itself: routing behind a kickboard or under a cabinet base is simplest during framing or a full kitchen remodel, while fitting one into a finished room usually means opening a section of wall or cabinet toe space to reach the nearest branch line. Many owners schedule the cut-in alongside other central vacuum work already underway rather than as a standalone project.\u003c\/p\u003e\u003cp\u003eConfirm your tubing runs standard inlet piping before ordering, and measure the wall or cabinet opening against the pan's flush-mount frame so the fit is clean on install day.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e VCPW01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Flush-mount sweep inlet pan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Central vacuum systems with standard inlet piping\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457264693498,"sku":"VCPW01","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/VCPW01_d9b3b50b-7b08-4ae6-8139-1ed61caf2e5a.jpg?v=1785158212"},{"product_id":"vacuum-pan-2-baseboard-mount-cv-inlet-white-vcpw02-bm","title":"Vacuum Pan 2 - Baseboard Mount CV Inlet, White","description":"\u003cp\u003eThe \u003cstrong\u003eVacuum Pan 2 Baseboard Mount CV Inlet\u003c\/strong\u003e (Part #VCPW02-BM) is a white mounting pan for a baseboard-level central vacuum inlet. It provides the rough-in point that holds the inlet valve low on the wall and ties it to the central vacuum tubing behind it.\u003c\/p\u003e\u003cp\u003eA cracked or loose pan lets the inlet shift in the baseboard and can leak air where the tubing connects, reducing suction at the hose. Setting a sound baseboard-mount pan restores a firm, sealed inlet so the system pulls at full strength.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e baseboard-mount central vacuum inlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e white baseboard inlet pan, Part #VCPW02-BM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e mounts the inlet valve at baseboard level and joins the tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e restores a secure, air-tight low-wall inlet\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFit the pan into the baseboard opening, attach the inlet valve, and check the tubing connection for a clean seal. Confirm a baseboard-mount inlet in white suits your installation before ordering.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457264759034,"sku":"VCPW02-BM","price":63.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/VCPW02-BM_69edd999-7f9f-4dcf-88f0-6d403e304ccd.jpg?v=1785142750"},{"product_id":"white-repair-kit-plastiflex-vacuum-pan-vcpwr01","title":"White Repair Kit - Plastiflex Vacuum Pan","description":"\u003cp\u003eThe \u003cstrong\u003eWhite Plastiflex Vacuum Pan Repair Kit\u003c\/strong\u003e (Part #VCPWR01) is a replacement mounting pan for a Plastiflex central vacuum wall inlet, finished in white. The vacuum pan is the rough-in mount that holds the inlet valve in the wall and connects it to the tubing behind it.\u003c\/p\u003e\u003cp\u003eOnce a pan cracks or its mounting ears strip, the inlet valve loosens and the tubing joint can leak air, weakening suction at the hose. This repair kit rebuilds a solid mounting point so the inlet stays firmly seated and the connection holds its seal.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Plastiflex central vacuum wall inlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e white mounting pan repair kit, Part #VCPWR01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e anchors the inlet valve and joins it to the wall tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e restores a firm, air-tight inlet mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFit the pan into the wall opening, secure the inlet valve, and verify the tubing connection is sealed. Match the white finish to your existing inlets before ordering.\u003c\/p\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457264922874,"sku":"VCPWR01","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/VCPWR01_88511c0e-5d5a-4e4f-87ec-8ff11d1bdf95.jpg?v=1785151665"},{"product_id":"vacuum-pan-install-kit-plastiflex-hose-with-adapter-flexible-valve-extension-through-floor-vproughin","title":"Plastiflex Vacuum Pan Rough-In Kit - Hose and Valve Extension","description":"\u003cp\u003eThis vacuum pan install kit from Plastiflex, part VPROUGHIN, is built for routing a central vacuum connection down through a floor instead of through a wall. It pairs a length of hose fitted with an adapter to a flexible valve extension that carries the connection from the pan opening down to the piping below.\u003c\/p\u003e\u003cp\u003eA built-in vac pan, the low kick-plate inlet often set at a kitchen island or under cabinetry, sits somewhere a straight horizontal run to a wall inlet usually is not practical. Sending the connection down through the floor instead means the extension has to make its way past joists and subfloor without pinching shut, which is the job the flexible section of this kit is built to do.\u003c\/p\u003e\u003cp\u003eBecause this is a through-floor path rather than a wall run, plan the route before cutting any openings. Once the hose and extension are set and the subfloor is closed back up, correcting the path means opening the floor again rather than simply pulling a hose out of a wall bay.\u003c\/p\u003e\u003cp\u003eConfirm your installation is actually a through-floor vac pan connection before ordering, since a standard wall inlet uses a different fitting entirely and has no use for this extension.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e VPROUGHIN vacuum pan install kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e hose with adapter and a flexible valve extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e routes a central vacuum pan connection through a floor rather than a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck before ordering:\u003c\/strong\u003e confirm your pan installation runs through the floor, not the wall\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastiflex","offers":[{"title":"Default Title","offer_id":48457265152250,"sku":"VPROUGHIN","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/VPROUGHIN_665badd6-aaab-4aea-a026-85e811eae0e0.jpg?v=1785145056"}],"url":"https:\/\/evacuumsandmore.com\/collections\/plastiflex.oembed?page=4","provider":"Vacuums and More","version":"1.0","type":"link"}