{"title":"ProTeam Backpack Vacuums","description":null,"products":[{"product_id":"proteam-tetraseal-provac-back-pack-100014","title":"ProTeam Tetraseal - Provac Back Pack","description":"\u003cp\u003eThis genuine OEM ProTeam \u003cstrong\u003eTetraseal\u003c\/strong\u003e (part #100014) fits the ProTeam Aviation Vac and QuietPro BP backpack vacuums and a wide range of related models. The seal sits between housing sections to keep the airflow path closed and filtered.\u003c\/p\u003e\u003cp\u003eA Tetraseal that is hardened, torn, or compressed lets air and fine dust bypass the filter path, which drops suction and lets debris escape. Even a small gap at this seal noticeably reduces cleaning power. A fresh seal restores the airtight path the vacuum depends on.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam Aviation Vac, QUIETPROBP, Super CoachVac, Super CoachVac HEPA, CoachVac, MegaVac, Super QuarterVac, Super QuarterVac HEPA, QuarterVac, LineVacer, GoVac BP, GoCartVac, LineVacer ULPA; also Windsor BV11.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e Tetraseal, genuine OEM #100014.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e airtight, filtered airflow and full suction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e seat the seal evenly all the way around before closing the housing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstalls as a genuine OEM direct-fit seal. Confirm your model before ordering.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456292729082,"sku":"100014","price":17.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100014_c9ed5af5-c1ec-4796-8cbc-6c78f9d70e33.jpg?v=1785156623"},{"product_id":"proteam-dome-type-back-pack-filter-100030","title":"ProTeam Dome Type Back Pack Filter","description":"\u003cp\u003eProTeam's dome filter is the foam cap that covers the motor intake inside their backpack vacuums, with a moulded grill holding its shape against the airflow. Part 100030 replaces it, measuring roughly 2.125 by 5.875 by 5.875 inches. It is a wear item rather than a repair part: the foam slowly loads with whatever fine dust gets past the filter bag, and a loaded dome filter chokes the motor.\u003c\/p\u003e\u003cp\u003eYou feel it as suction that fades across a shift, hear it as a motor running higher and hotter than it used to, and in bad cases smell it. Pull the dome out and hold it up; if it is grey right through to the core it is well overdue. On a machine in daily commercial service, monthly inspection is realistic.\u003c\/p\u003e\u003cp\u003eIt fits the ProTeam CoachVac, Super CoachVac, MegaVac, LineVacer, ProVac, QuarterVac, Super QuarterVac, Sierra, GoCartVac and AviationVac.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456292794618,"sku":"100030","price":11.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100030_807ce7d0-0265-4233-8d0b-b132ad768409.jpg?v=1785139260"},{"product_id":"floor-brush-proteam-backpack-11-adjustable-brush-100083","title":"ProTeam Floor Brush - Backpack Vacuum, 11 Inch Adjustable Brush","description":"\u003cp\u003ePart 100083, cataloged under ProTeam item 1507, is a wide floor-cleaning tool measuring 11 inches across, fitted with an adjustable bristle strip and built for ProTeam backpack vacuums working hard floors, entrance mats and edges along baseboards.\u003c\/p\u003e\u003cp\u003eOnce the bristle strip flattens, the tool stops sweeping and starts shoving debris instead. Grit skitters ahead of the brush rather than getting pulled into the airflow behind it, which usually means going back over the same section of tile a second time to actually pick it up. That adjustable strip does essentially all of the real work in this tool, so once it has gone flat, no amount of backpack motor power behind it makes up the difference.\u003c\/p\u003e\u003cp\u003eCheck the wand cuff diameter against the fitting on this brush before ordering, so it seats snugly rather than wobbling in use.\u003c\/p\u003e\u003cp\u003eA brush strip usually wears unevenly rather than all at once, going thin along one edge first from repeated contact with a particular angle of push. Rotating the tool slightly during use can slow that lopsided wear, but once one edge is visibly shorter than the rest the brush no longer sits flat across its full width and pickup drops even on a section of floor that looks clean.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 100083 (ProTeam item 1507)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 11 inch, adjustable bristle strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam backpack vacuums using item 1507\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e bristles are splayed, cut down short, or wearing thinner along one edge than the other\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456292892922,"sku":"100083","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100083_7ca26f8a-4836-41c5-8215-c9849f3ecdc1.jpg?v=1785146769"},{"product_id":"brush-strip-proteam-backpack-floor-brush-100083-100084","title":"Brush Strip - ProTeam Backpack Floor Brush 100083","description":"\u003cp\u003eThis replacement \u003cstrong\u003ebrush strip\u003c\/strong\u003e (part #100084) fits the ProTeam backpack vacuum floor brush, model 100083. The strip is the row of bristles that runs along the floor tool and sweeps debris toward the suction opening.\u003c\/p\u003e\u003cp\u003eA brush strip with flattened or worn bristles loses contact with the floor and leaves grit and hair behind. On carpet, worn bristles no longer agitate the fibers. Replacing the strip restores consistent floor contact and effective pickup from the floor tool.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam backpack floor brush, model 100083.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e brush strip, #100084.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e renewed floor contact and debris pickup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e replace when the bristles no longer touch the floor evenly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSlides into the floor brush as a direct-fit replacement. Confirm your floor tool model before ordering.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456292958458,"sku":"100084","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100084_b94b1a74-4a70-41e0-97eb-f04515fa9efd.jpg?v=1785144172"},{"product_id":"nut-proteam-aluminum-wand-100099","title":"ProTeam Aluminum Wand Nut","description":"\u003cp\u003ePart 100099 is the nut used on ProTeam's aluminum wands, one of the small threaded fittings the brand sells on its own rather than only as part of a complete wand. Being able to order the nut by itself is what makes a worn joint worth repairing instead of replacing the tube it sits on.\u003c\/p\u003e\u003cp\u003eA nut is a fastener, and it fails the way fasteners fail. Threads that have been cross-started or drawn down too hard will not pull the joint up properly again, and the tell is a nut that keeps turning without the joint ever going tight, rather than one that simply feels loose in the hand. Making that distinction before ordering is worth the minute it takes, because a nut that still tightens normally is rarely the reason a wand has developed play.\u003c\/p\u003e\u003cp\u003eThe consequence of a joint that will not pull up tight is air lost where the wand ought to be sealed. Nothing about it shows from outside: the tube stays straight, the finish stays sound, and the only symptom is suction reading lower at the tool than the machine should be delivering, which is easy to blame on a bag, a filter or the hose before anyone thinks to look at a fitting this small.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 100099\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e nut for ProTeam aluminum wands\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e compare the thread against the nut coming off your own wand\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDraw the new nut down by hand first and check for movement at the joint before deciding it has seated fully. Over-tightening is a common way to spoil a fitting that was serviceable to begin with.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456293023994,"sku":"100099","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100099.jpg?v=1785163553"},{"product_id":"proteam-compression-ring-100100","title":"ProTeam Compression Ring","description":"\u003cp\u003ePart 100100 is ProTeam's compression ring for its aluminum two-piece wands, the collar that clamps the upper and lower wand sections together and keeps that joint tight and sealed while the wand is worked back and forth all shift. It ships as a bare ring rather than as part of a larger kit, for shops that already know which wand needs it.\u003c\/p\u003e\u003cp\u003eCompression rings are inexpensive, and that is exactly why they are worth replacing on their own rather than as an excuse to buy a whole new assembly. A ring that has flattened, cracked, or lost its grip lets air leak past the joint it was sealing, and a leak in the airflow path shows up as weaker suction at the tool end even when the motor and filters are in good shape. Because the leak is small, it is easy to mistake for a filter or motor problem until the joint itself is actually checked.\u003c\/p\u003e\u003cp\u003eParts listings match this ring to ProTeam's aluminum wand assemblies, including wand part numbers 10002, 100104, 101338, 106290, and 106293, which ProTeam runs across its backpack platforms. Check the ring against the wand it is replacing, or against your machine's part diagram, before ordering to confirm it is the correct size.\u003c\/p\u003e\u003cp\u003eA ring that is even slightly undersized for its fitting will not hold a seal no matter how carefully it is installed, so matching the exact diameter matters more with this part than with most small hardware on a backpack machine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 100100, compression ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e clamps and seals the joint between aluminum wand sections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam aluminum wands including 10002, 100104, 101338, 106290, and 106293; verify against your part diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizing:\u003c\/strong\u003e confirm exact diameter against the fitting it replaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWatch for:\u003c\/strong\u003e weaker suction with clean filters, a joint that will not hold a seal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456293187834,"sku":"100100","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100100_da5d139e-74c5-4bad-8f61-24d0f3d2412a.jpg?v=1785153083"},{"product_id":"aluminum-wand-sleeve-proteam-100101","title":"ProTeam Aluminum Wand Sleeve","description":"\u003cp\u003ePart 100101 is ProTeam's replacement sleeve for its aluminum wands. The sleeve sits at the wand's coupling and gives the contact surface that holds a tool attachment in place, so it is the piece doing the gripping when a floor tool or a crevice tool is pushed onto the wand end.\u003c\/p\u003e\u003cp\u003eProTeam lists it as the sleeve for aluminum wands 100102, 100104, 101338 and 107628. Wear here shows up as a tool that rattles in use or works itself loose mid-pass, and as suction lost at the joint rather than at the nozzle, since a coupling that no longer closes tightly draws air in ahead of the tool.\u003c\/p\u003e\u003cp\u003eSleeves wear from repeated fitting and removal more than from age alone, so a wand broken down for storage or transport at the end of every shift reaches this point sooner than one left assembled between jobs. None of that wear is visible with a tool fitted, which is why a joint that simply feels loose is worth pulling apart even when the aluminum tube itself is straight and undamaged.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 100101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e replacement sleeve for aluminum wands\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits ProTeam wands:\u003c\/strong\u003e 100102, 100104, 101338, 107628\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e each\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCheck your wand's own number against that list before ordering, since ProTeam's wand range is not all one size. Fit the sleeve to the section it belongs on before reassembling the rest, so the coupling pulls up tight.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456293449978,"sku":"100101","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100101_97e3ad01-1db4-4c78-87ce-20a65755c342.jpg?v=1785151660"},{"product_id":"proteam-56-one-piece-two-bend-aluminum-wand-100102","title":"ProTeam 56\" One Piece Two-Bend Aluminum Wand","description":"\u003cp\u003eThis replacement \u003cstrong\u003ealuminum wand\u003c\/strong\u003e (part #100102) is the 56-inch one-piece, two-bend wand for the ProTeam 1911 backpack vacuum. The wand extends your reach and carries suction from the hose to the floor or dusting tool.\u003c\/p\u003e\u003cp\u003eA wand that is dented, cracked, or bent at the joints loses its seal and makes tools hard to attach or steer. Damage at the bends is common where the wand takes the most stress. A sound wand restores a straight, sealed air path and comfortable reach.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam 1911 backpack vacuum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 56-inch one-piece two-bend aluminum wand, #100102.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e full reach with a secure, sealed connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e check the end fittings for a snug tool fit during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstalls as a direct-fit replacement wand. Confirm your model before ordering.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456293482746,"sku":"100102","price":81.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100102_f3af2288-fd8e-42d2-84d3-d30ef630fd6e.jpg?v=1785150313"},{"product_id":"60-straight-aluminum-extension-wand-proteam-1-12-100104","title":"60\" Straight Aluminum Extension Wand - ProTeam 1-1\/2\"","description":"\u003cp\u003eThis replacement \u003cstrong\u003eextension wand\u003c\/strong\u003e (part #100104) is a 60-inch straight aluminum wand with a 1-1\/2-inch fitting for ProTeam backpack vacuums. The wand adds reach for high dusting and extended floor cleaning while carrying suction to the tool.\u003c\/p\u003e\u003cp\u003eA wand that is dented, split, or worn at the fittings leaks air and holds tools loosely, which reduces suction at the end. Bent sections also make the wand hard to control. A straight, sound wand restores a sealed connection and steady reach.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam backpack vacuums with a 1-1\/2-inch fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 60-inch straight aluminum extension wand, #100104.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e extended reach with a secure, sealed fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e confirm the 1-1\/2-inch fitting matches your hose and tools.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstalls as a direct-fit replacement. Verify your fitting size before ordering.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456293548282,"sku":"100104","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100104_ce177361-2e7f-46c2-bd7f-8e67e39132ea.jpg?v=1785147623"},{"product_id":"crevice-tool-17-proteam-backpack-100108","title":"ProTeam Backpack Crevice Tool, 17 Inch","description":"\u003cp\u003eProTeam's 17 inch crevice tool, part 100108, mounts on the 1-1\/2 inch wand and hose used across the brand's backpack vacuums.\u003c\/p\u003e\u003cp\u003eLength is the specification that matters here. At 17 inches this reaches along a run of baseboard, behind a radiator, down the side of theater and stadium seating or across the top of a door frame from standing height, where a short household crevice tool means crouching or moving a ladder to do the same work. Across a full commercial route that difference adds up in a way that is easy to underestimate from a product photo. Ceiling corners, vent grilles and the tops of partitions come into range from the floor, which is the difference between cleaning them on schedule and cleaning them when someone complains.\u003c\/p\u003e\u003cp\u003eIt is molded plastic and weighs about a third of a pound, so it rides on the belt or the wand for a whole shift without being noticed. Replace it once the tip has cracked or the seam has split, since a leak at the narrow end pulls stray air in at exactly the point where the tool is supposed to be concentrating it.\u003c\/p\u003e\u003cp\u003eA tool this long flexes more than a short one, so holding it nearer the working end rather than only at the base keeps the tip in contact along a full wall run instead of letting it bow away partway down.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 100108\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 17 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e 1-1\/2 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam backpack vacuums\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456293613818,"sku":"100108","price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100108_4d0d443f-e5c1-42d2-9da3-e4f6fdeaf4e6.jpg?v=1785146240"},{"product_id":"black-crevice-tool-proteam-backpack-28-100109","title":"ProTeam 28 Inch Black Crevice Tool for Backpack Vacuums","description":"\u003cp\u003eThis is a 28 inch black crevice tool built for ProTeam backpack vacuums, sold under SKU 100109.\u003c\/p\u003e\u003cp\u003eTwenty-eight inches is well beyond a standard crevice tool's length, and that extra reach opens up spots a short tool simply cannot get into. Instead of crouching to work behind a radiator or under a fixed shelf, someone wearing a backpack vacuum can stand upright and still reach high window sills, deep gaps, and tight corners, which adds up over a full shift of commercial cleaning.\u003c\/p\u003e\u003cp\u003eA longer tool also loses more suction over its length than a short one, so a cracked or split tip costs a long crevice tool more airflow than the same crack would cost a short one. Checking the tip for hairline cracks before a shift is worth the few seconds it takes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 28 inch crevice tool, SKU 100109\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam backpack vacuum hose and wand fittings; verify against your machine's part diagram before ordering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e long-reach tool for baseboards, corners, and gaps a floor tool cannot reach\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the tip is cracked or flattened and no longer seals against airflow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProTeam uses more than one wand and hose fitting across its backpack lineup, so confirm compatibility with your specific model before ordering.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456293679354,"sku":"100109","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100109.jpg?v=1785147056"},{"product_id":"dust-brush-1-12-proteam-backpack-100110","title":"Dust Brush (1-1\/2\") - ProTeam Backpack","description":"\u003cp\u003eThis replacement \u003cstrong\u003edust brush\u003c\/strong\u003e (part #100110) has a 1-1\/2-inch fitting for ProTeam backpack vacuums. The soft-bristled brush sweeps dust from shelves, blinds, vents, and other delicate surfaces while the vacuum draws it away.\u003c\/p\u003e\u003cp\u003eAs the bristles wear, splay, or fall out, the dust brush stops holding dust against the surface and simply pushes it around. Cracks at the collar can also loosen the fit on the wand. A fresh dust brush restores gentle, effective dusting with a secure connection.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam backpack vacuums with a 1-1\/2-inch fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e dust brush, #100110, also #14-1606-00.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e gentle, effective dusting of delicate surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e tap trapped dust from the bristles between uses.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAttaches directly to the wand as a friction-fit tool. Confirm your fitting size before ordering.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456293712122,"sku":"100110","price":12.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100110_06d4d471-fe2c-4248-abf6-575b438dcc19.jpg?v=1785147618"},{"product_id":"upholstery-tool-plastic-1-12-proteam-backpack-5-inch-100115","title":"ProTeam Backpack Plastic Upholstery Tool - 1-1\/2 Inch, 5 Inch Wide","description":"\u003cp\u003eThis upholstery tool is built for ProTeam backpack vacuums, with a plastic body, a 1-1\/2 inch fitting and a 5-inch cleaning face sized for furniture, stair treads and vehicle interiors rather than open floor. Part 100115 connects directly to the wand or hose end used across ProTeam's backpack line.\u003c\/p\u003e\u003cp\u003ePlastic upholstery tools like this take their wear at the connection collar rather than across the tool body itself. After enough on-and-off cycles through a work shift, the collar can widen slightly, and once it has, the tool no longer holds its snug fit on the wand and can twist or slip free mid-pass, particularly when working overhead or into a tight corner where the tool gets more sideways pressure than it would flat on a floor. In a commercial setting where the same tool is swapped on and off dozens of times a shift, this kind of collar wear shows up long before the tool body itself has anything wrong with it.\u003c\/p\u003e\u003cp\u003eThis tool fits ProTeam backpack vacuums using the 1-1\/2 inch standard connection. Confirm your wand or hose size before ordering, since ProTeam has sold backpack models with more than one attachment diameter. Keeping a spare on hand is worth considering in a commercial setting, since a cracked collar mid-shift means switching to a less suitable tool until a replacement arrives.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 100115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam backpack vacuum, 1-1\/2 inch connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e upholstery tool, 5 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e plastic body\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456293810426,"sku":"100115","price":23.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100115_e2dacb02-74a7-44d6-8d19-0d51a39b322e.jpg?v=1785151713"},{"product_id":"tapered-one-bend-chrome-wand-51-proteam-1-12-to-1-14-100136","title":"ProTeam One-Bend Chrome Tapered Wand (54\") - 1-1\/2 to 1-1\/4 in.","description":"\u003cp\u003eProTeam's one-bend chrome tapered wand, part 100136, measures 54 inches and steps down from a 1-1\/2 inch fitting at the hose end to a 1-1\/4 inch fitting at the tool end. That taper is what lets a standard 1-1\/2 inch ProTeam hose drive smaller tools, a 1-1\/4 inch turbo brush among them, with no separate reducer in between.\u003c\/p\u003e\u003cp\u003eThe single bend does the other half of the work. It sets the tool angle for floor cleaning without adding a second joint that could work loose, so there is one less connection to check when suction goes soft. Both ends are friction fit, which keeps the wand quick to swap between tools but leaves it to the operator to seat each joint fully.\u003c\/p\u003e\u003cp\u003eThat is where most of the trouble comes from. A wand left slightly proud of the hose cuff leaks at the joint, and a tool that has not been pushed the whole way onto the wand end leaks in exactly the same manner, so a drop in suction that seems to come from nowhere is worth chasing at both couplings before anything further upstream is suspected.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 100136\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 54 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1-1\/2 inch hose end down to 1-1\/4 inch tool end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e friction fit at both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e chrome, one bend\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePush each joint home and give the wand a light twist to confirm it has seated before starting a pass. A joint that has gone slack over a shift is worth pushing home again rather than treated as a fault, since friction fits loosen with use and reseat without any parts being needed.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456293875962,"sku":"100136","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100136_d1cecd8d-fd58-4f95-b2b6-faf87e3f27b6.jpg?v=1785146152"},{"product_id":"floor-tool-scallop-felt-proteam-1-12-commercial-100144","title":"14\" Hard Surface Floor Tool with Scalloped Felt - ProTeam, 1-1\/2\"","description":"\u003cp\u003eThe ProTeam 14 inch hard surface floor tool with scalloped felt is a specialty floor attachment for commercial vacuums using standard 1-1\/2 inch wands with screw-down connections. The felt strip is the point: it is soft but firm with good abrasion resistance, letting the tool ride over finished floors without leaving the fine scratches that nylon bristles can cause.\u003c\/p\u003e\u003cp\u003eThat makes it the recommended choice for hardwood and high-polished floor finishes, where protecting the surface matters as much as picking up the dust. It is also suitable for cleaning polyethylene barrier or visqueen sheeting when work must adhere to EPA RRP guidelines, a niche but important role on renovation sites.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e14 inch cleaning width for efficient coverage\u003c\/li\u003e\n\u003cli\u003eScalloped felt safe for delicate and high-polish finishes\u003c\/li\u003e\n\u003cli\u003eFits standard 1-1\/2 inch wands, screw-down connection\u003c\/li\u003e\n\u003cli\u003eSuitable for EPA RRP visqueen cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA sensible addition to any ProTeam kit used on fine flooring.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456293941498,"sku":"100144","price":61.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100144.jpg?v=1785139680"},{"product_id":"proteam-attachment-felt-blade-14-100145","title":"ProTeam Attachment Felt Blade - 14\"","description":"\u003cp\u003eA felt blade is the strip that runs along the sole of a wide floor tool, letting the tool glide on a hard surface and sweep fine dust toward the suction slot instead of scattering it ahead. This is the 14 inch felt blade for ProTeam floor tools, part 100145, sold as a replacement for a strip that has compressed, torn, or worn through to the tool body.\u003c\/p\u003e\u003cp\u003eThe signs are easy to read once you know them. The tool chatters or drags on tile, a fine line of dust is left behind on each pass, and the leading edge starts marking polished floors. Felt is a consumable; on a machine used daily it wears out long before the tool does.\u003c\/p\u003e\u003cp\u003eMatch the 14 inch length to your floor tool before ordering. We hold no model-level fitment data for this blade beyond ProTeam's own attachments, so check the tool rather than the vacuum.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456294039802,"sku":"100145","price":15.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100145.jpg?v=1785138598"},{"product_id":"felt-proteam-1-12-commercial-tool-100146","title":"ProTeam Felt Wear Strip - 1-1\/2 Inch Commercial Floor Tool","description":"\u003cp\u003ePart 100146 is the felt wear strip that goes on the ProTeam 1-1\/2 inch commercial floor tool.\u003c\/p\u003e\u003cp\u003eFelt is the right choice for finished hard floors because it will not scratch, but that softness is also why it wears. Months of daily use compact the fibers, and once dirt works its way into the flattened felt, the tool can start marking the same floors it was meant to protect instead of gliding cleanly across them.\u003c\/p\u003e\u003cp\u003eSwapping in fresh felt is far cheaper than replacing the whole floor tool, and it is worth checking on a set schedule for any crew running hardwood or polished floors every day rather than waiting for visible marks to show up. A quick visual check for compacted, shiny felt during routine maintenance catches the wear before it starts affecting the floor finish.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 100146, felt wear strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam 1-1\/2 inch commercial floor tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the felt compacts, picks up grit, or starts marking the floor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e daily use on hardwood or polished hard surfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456294072570,"sku":"100146","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100146.jpg?v=1785137321"},{"product_id":"scallop-tool-proteam-1-12-backpack-100147","title":"ProTeam Scallop Carpet Floor Tool, 1-1\/2 Inch","description":"\u003cp\u003eThe ProTeam scallop tool, part 100147, is a 14-inch carpet floor tool with a scalloped front edge, sized for the 1-1\/2 inch wand connection used across ProTeam's backpack line. It is listed for commercial low to medium pile carpet and durable flooring rather than for delicate finishes.\u003c\/p\u003e\u003cp\u003eThe scallops are the working part. Cutting the leading edge into a row of notches lets the tool ride over carpet instead of sealing flat against it, so air keeps moving under the head and the nozzle lifts grit, paper scraps and clips rather than stalling against the pile. A flat-edged bare-floor tool does the opposite job and is a separate purchase.\u003c\/p\u003e\u003cp\u003eBackpack machines earn their keep by covering ground fast, which means the floor tool takes daily wear from being dragged across carpet, tile and thresholds. Once the scalloped edge rounds over or chips, it no longer holds the head at the right distance from the carpet, and pickup falls behind what the machine's suction can otherwise deliver.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e ProTeam scallop carpet floor tool, part 100147\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 14 inches, with a 1-1\/2 inch wand connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e commercial low to medium pile carpet and durable hard flooring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e confirm your wand takes a 1-1\/2 inch fitting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456294138106,"sku":"100147","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100147_123f6b9b-925e-4e47-b250-819eff685635.jpg?v=1785138479"},{"product_id":"curved-wand-chrome-proteam-backpack-100167","title":"13\" Curved Chrome Wand with Bleeder Control - ProTeam, 1-1\/4\"","description":"\u003cp\u003eThis ProTeam 13-inch curved chrome \u003cstrong\u003ewand\u003c\/strong\u003e (part #100167) has a 1-1\/4-inch fitting and a built-in bleeder valve for controlling airflow. The bleeder lets you dial suction down for delicate tasks without shutting off the machine.\u003c\/p\u003e\u003cp\u003eWhen a wand is dented, the bleeder sticks, or the fittings wear, you lose the ability to fine-tune suction and tools no longer seat firmly. A cracked chrome tube also leaks air along its length. A sound wand restores adjustable airflow and a secure tool connection.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam 1-1\/4-inch friction-fit tools; pairs with the 24-inch to 40-inch chrome telescoping wand, model 106343.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 13-inch curved chrome wand with bleeder valve, #100167.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e adjustable suction for varied cleaning tasks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e work the bleeder valve open and closed to confirm it moves freely.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConnects as a friction-fit component in the wand set. Verify your fitting size before ordering.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456294203642,"sku":"100167","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100167_28bcb31a-4fb3-4a3c-aa1d-721ca80d66cb.jpg?v=1785153160"},{"product_id":"proteam-motor-rectifier-aviation-back-pack-100174","title":"ProTeam Motor Rectifier - Aviation Back Pack","description":"\u003cp\u003eThis genuine OEM ProTeam \u003cstrong\u003emotor rectifier\u003c\/strong\u003e (part #100174) fits the Aviation Vac backpack vacuum. The rectifier conditions the electrical supply to the motor so it receives clean, steady current.\u003c\/p\u003e\u003cp\u003eWhen a rectifier fails, the motor can lose power, run erratically, or stop drawing current properly, which shows up as weak suction or a machine that will not run. Electrical faults here often mimic motor failure. A correct rectifier restores stable power to the motor, and confirming it before condemning the motor can save an unnecessary and costly motor replacement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam Aviation Vac backpack vacuum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e motor rectifier, genuine OEM #100174.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e clean, steady power delivery to the motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e disconnect power before servicing electrical components; professional installation is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstalls as a genuine OEM direct-fit component. Confirm your model before ordering.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456294269178,"sku":"100174","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100174.jpg?v=1785156653"},{"product_id":"proteam-top-cap-lid-10-quart-super-coach-purple-100197","title":"ProTeam Top Cap Lid - 10 Quart Super Coach (Purple)","description":"\u003cp\u003eThis genuine OEM ProTeam \u003cstrong\u003etop cap lid\u003c\/strong\u003e (part #100197) is the purple 10-quart lid for the Super Coach backpack vacuum. The cap closes the top of the filter chamber and holds the seal that keeps the airflow path closed.\u003c\/p\u003e\u003cp\u003eA top cap that is cracked, warped, or missing lets air and dust escape from the top of the tank, which drops suction and defeats filtration. Broken tabs also let the cap sit loose during use. A sound cap restores a tight, sealed closure over the filter chamber.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam Super Coach 10-quart backpack (SUPERCOACH).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e top cap lid, purple, genuine OEM #100197.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e a tight seal over the filter chamber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e check the cap gasket for wear while the lid is off.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstalls as a genuine OEM direct-fit lid. Confirm your model and tank size before ordering.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456294465786,"sku":"100197","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100197.jpg?v=1785139943"},{"product_id":"latch-kit-proteam-linevacer-3-latches-3-locks-6-rivets-6-washers-100286","title":"Latch Kit - ProTeam LineVacer Top\/Bottom Cap (3 Latches, 3 Locks, 6 Rivets, 6 Washers)","description":"\u003cp\u003eThis \u003cstrong\u003elatch kit\u003c\/strong\u003e (part #100286) secures the top and bottom caps on ProTeam LineVacer backpack vacuums. The kit includes three latches, three locks, six rivets, and six washers for a complete cap-latch repair.\u003c\/p\u003e\u003cp\u003eWorn or broken latches let the cap pop open during use, which releases dust and debris and interrupts cleaning. Because the latches share the load, replacing them as a set keeps the caps sealed evenly. A fresh set of latches restores a secure, reliable cap closure.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam LineVacer HEPA, LineVacer ULPA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e latch kit, #100286.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 3 latches, 3 locks, 6 rivets, 6 washers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e replace all latches together rather than one at a time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstalls as a complete direct-fit repair kit. Confirm your LineVacer model before ordering.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456294596858,"sku":"100286","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100286_d474ade0-bb82-413f-98ca-6e1e83a341c0.jpg?v=1785144324"},{"product_id":"proteam-linevacer-micro-filter-paper-bags-10-pack-100291","title":"ProTeam Micro Filter Paper Bags - 10 Pack (LineVacer)","description":"\u003cp\u003eMaintain the cleaning power of your ProTeam vacuum with this essential genuine OEM replacement paper vacuum bags. Compatible with ProTeam LINEVACER.\u003c\/p\u003e\u003cp\u003eThese double-pleated micro filtration bags with 21% more filtration area trap fine dust and allergens, keeping your indoor air cleaner while you vacuum. Replace bags when they reach approximately two-thirds full to maintain consistent suction power. Do not wait until bags are completely packed, as overfilling reduces airflow and cleaning effectiveness.\u003c\/p\u003e\u003cp\u003eAlso available as part #14-2443-05.\u003c\/p\u003e\u003cp\u003ePack of 10. Also fits CoachVac, Super CoachVac, MegaVac Pro Team 100291 Intercept Micro Filters are the first line of defense in ProTeam's Four Level Filtration system which reduce and control indoor air pollutants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e ProTeam: LINEVACER\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456294662394,"sku":"100291","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100291_cb2448ed-19c0-4cf8-939b-2e4186a91617.jpg?v=1785143059"},{"product_id":"twist-on-lid-proteam-megavac-scm1282-4-tabs-black-100320","title":"Black Twist Cap - ProTeam MegaVac \/ CoachVac \/ Super CoachVac","description":"\u003cp\u003eThis replacement black twist \u003cstrong\u003ecap\u003c\/strong\u003e (part #100320) has four locking tabs and secures the filter-bag compartment on 10-quart ProTeam backpack vacuums. The quick-twist design lets you change bags without tools.\u003c\/p\u003e\u003cp\u003eA cap that is cracked, warped, or worn at the tabs no longer seals tightly, so dust escapes and suction drops. Damaged tabs can also let the cap loosen mid-clean. A sound cap restores a tight seal and fast, tool-free bag changes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam Super CoachVac, Super CoachVac HEPA, CoachVac 10 Qt, MegaVac 10 Qt, SCM1282, MV250.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e black twist cap, four tabs, #100320.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e a tight seal and tool-free bag access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e line up all four tabs before twisting the cap closed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTwists on as a direct-fit replacement. Confirm your model and tank size before ordering.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456295940346,"sku":"100320","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100320_398f7fc6-4207-4689-aecb-267eb193c215.jpg?v=1785145953"},{"product_id":"proteam-sc-mv-coach-micro-filter-paper-bags-10-pack-10-quart-100331","title":"ProTeam Micro Filter Paper Bags - 10 Pack, 10 Quart (Coach Vacuum, Super Coach)","description":"\u003cp\u003eThese are the 10 quart micro filter bags for ProTeam's larger backpack vacuums, sold ten to a pack as part 100331. Each bag carries around 698 square inches of filter media, which is what lets a bag this size hold a full night's dust without strangling airflow, and the micro-grade paper catches fine particles that would otherwise load the motor filter behind it.\u003c\/p\u003e\u003cp\u003eChange bags before they look full. Airflow begins dropping once a bag is about two-thirds loaded, and by the time a crew reports that a machine has no suction, the bag has usually been full for days and the dome filter behind it has taken the punishment. Keeping a sleeve of ten on the cart is the cheapest performance upgrade a cleaning operation can make.\u003c\/p\u003e\u003cp\u003eThey fit the ProTeam CoachVac, Super CoachVac and MegaVac 10 quart backpacks.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456295973114,"sku":"100331","price":16.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100331_cf3df81f-6a11-4612-808e-c309341bf8ec.jpg?v=1785144583"},{"product_id":"proteam-with-screws-tail-vacuum-motor-compression-ring-100335","title":"ProTeam With Screws Tail Vacuum Motor Compression Ring","description":"\u003cp\u003eThis genuine OEM ProTeam \u003cstrong\u003emotor compression ring\u003c\/strong\u003e (part #100335) ships with its mounting screws and secures the motor at the tail of the backpack unit. The ring clamps the motor in place and helps maintain the seal around it.\u003c\/p\u003e\u003cp\u003eA cracked or loose compression ring lets the motor shift and vibrate, which adds noise, stresses the mounts, and can break the seal around the motor. Left loose, the movement accelerates wear. A sound ring holds the motor firmly and keeps it sealed in position.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam Aviation Vac, COACHVAC, MEGAVAC, PROVAC, QUARTERVAC, SUPERCOACH, Everest, GoVac BP, Sierra, LineVacer, GoCartVac, LineVacer ULPA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e motor compression ring with screws, genuine OEM #100335.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e a secure, sealed motor mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e tighten the screws evenly so the ring seats square.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstalls as a genuine OEM direct-fit component. Confirm your model before ordering.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456296038650,"sku":"100335","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100335_0619a160-a02e-4baa-9f0c-e1210c03e45e.jpg?v=1785144963"},{"product_id":"harness-system-without-backplate-proteam-super-coach-100354","title":"ProTeam Backpack Strap Assembly with Harness (No Backplate)","description":"\u003cp\u003ePart 100354 is the harness system for ProTeam's backpack vacuums, and it arrives without the backplate. It is the strap system that carries the machine's weight on the operator, and it is replaced as a set for a practical reason: harness wear rarely confines itself to a single strap, and by the time one point has failed the rest has usually logged the same hours.\u003c\/p\u003e\u003cp\u003eHarnesses wear out gradually, and the operator feels it before anyone notices the strap itself. The webbing itself frays at the point it feeds through a buckle, grip in that buckle eventually fails and lets the strap slip loose within an hour of wear, and the whole rig starts settling lower on the operator's back, swaying with each stride instead of sitting still. Most operators notice sore shoulders at the end of a shift well before they think to check the straps as the cause, since the discomfort builds slowly enough to feel like normal fatigue rather than a worn part.\u003c\/p\u003e\u003cp\u003eThis version makes sense when the backplate remains in good shape and it is only the strap system that has given out; ProTeam catalogs the complete harness with backplate as a separate item for machines that need both. This harness system fits the ProTeam CoachVac, MegaVac, QuarterVac, Super CoachVac and its HEPA version, and Super QuarterVac and its HEPA version.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 100354\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e full strap system, replaced as one set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackplate:\u003c\/strong\u003e not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam Super CoachVac, CoachVac, MegaVac, QuarterVac family\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e harness that will not stay cinched, machine riding low on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstalling it puts the full range of shoulder and waist adjustment back to new, which is most of what determines whether a long shift on one of these machines is comfortable or not.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456296235258,"sku":"100354","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100354_22261b2f-3041-4902-9ba3-8c08a95898cd.jpg?v=1785142018"},{"product_id":"proteam-strap-set-back-pack-100356","title":"ProTeam Strap Set Back Pack","description":"\u003cp\u003eStraps are the wear item on a ProTeam backpack harness, and part 100356 is the strap set ProTeam supplies to renew them. Webbing that has carried a machine through years of daily routes stretches out, frays where it runs through the buckles, and softens at the stitched anchor points until an adjustment no longer holds from one corridor to the next.\u003c\/p\u003e\u003cp\u003eThe decline is gradual enough that operators tend to adapt without noticing. A stretched strap slips through its buckle a little sooner each week, the pack rides a little lower, and the operator cinches harder to compensate, until one day the harness cannot be tensioned properly at all. From then on the machine's weight stops sitting where the harness was designed to place it, and a full shift wearing the pack becomes far more tiring than it should be.\u003c\/p\u003e\u003cp\u003eThe parts listing identifies this simply as the strap set for ProTeam's backpack machines, without itemizing the contents piece by piece, so check the exploded parts diagram for your model to confirm it covers the components your harness needs, particularly if the damage extends beyond the straps themselves into molded plastic. Coverage runs across a broad sweep of the line: QuarterVac, Super QuarterVac, Super QuarterVac HEPA, MegaVac, ProVac, CoachVac, Super CoachVac, Super CoachVac HEPA, LineVacer, Super HalfVac HEPA, Sierra, QuietPro BP HEPA, and AviationVac.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 100356, backpack strap set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam QuarterVac, Super QuarterVac, Super QuarterVac HEPA, MegaVac, ProVac, CoachVac, Super CoachVac, Super CoachVac HEPA, LineVacer, Super HalfVac HEPA, Sierra, QuietPro BP HEPA, AviationVac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e renews the harness strapping that carries the machine's weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e webbing is frayed, stretched, or will not hold its adjustment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456296300794,"sku":"100356","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100356.jpg?v=1785139949"},{"product_id":"proteam-shoulder-strap-adjustment-buckle-pro-team-vacuum-100358","title":"ProTeam Shoulder Strap Adjustment Buckle Pro Team Vacuum","description":"\u003cp\u003ePart 100358 is the single adjustment buckle on the shoulder strap of ProTeam's backpack harness, used across a long list of models: AviationVac, Everest, Sierra, ProVac CN, RunningVac, QuietPro BP HEPA, LineVacer, Super HalfVac HEPA, Super QuarterVac HEPA, Super QuarterVac, QuarterVac, MegaVac, CoachVac, Super CoachVac HEPA, and Super CoachVac. The strap threads through it, and every pound of the machine passes through this one small piece of plastic on its way to the operator's shoulder.\u003c\/p\u003e\u003cp\u003eA cracked buckle does not fail all at once. It holds the setting through the first few minutes of a shift, then starts creeping loose a little at a time as the plastic flexes under load, until the operator notices the vacuum has slid halfway down their back with the weight sitting wrong on one side. Retightening buys a few more minutes before it slips again. A visible crack at the strap slot is usually the first sign, worth a look whenever a strap stops holding the setting it used to.\u003c\/p\u003e\u003cp\u003eSwapping a single buckle takes a couple of minutes and costs a fraction of a full harness, which is why field crews carrying these backpacks daily keep a spare or two on hand instead of risking a strap failure mid-route.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 100358, shoulder strap adjustment buckle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam AviationVac, Everest, Sierra, ProVac CN, RunningVac, QuietPro BP HEPA, LineVacer, Super HalfVac HEPA, Super QuarterVac HEPA, Super QuarterVac, QuarterVac, MegaVac, CoachVac, Super CoachVac HEPA, Super CoachVac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e sets and holds shoulder strap length under load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the strap will not hold its adjustment or the buckle shows a visible crack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456296366330,"sku":"100358","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100358_54175e55-e755-4b2c-b6cf-a8668f5f99bf.jpg?v=1785154241"},{"product_id":"proteam-waist-belt-pro-vac-backpack-100359","title":"ProTeam Waist Belt - Pro Vacuum Backpack","description":"\u003cp\u003eThis genuine OEM ProTeam \u003cstrong\u003ewaist belt\u003c\/strong\u003e (part #100359) fits the QuietPro BP, Sierra, and a wide range of ProTeam backpack vacuums. The belt wraps the operator's waist to carry the load and hold the pack steady during use.\u003c\/p\u003e\u003cp\u003eA waist belt that is frayed, stretched, or has a broken buckle shifts the pack's weight onto the shoulders and back, making the vacuum tiring and awkward to wear. A failed buckle can let the pack sag mid-task. A sound belt restores proper weight distribution and a secure fit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam QUIETPROBP, SIERRA, Super CoachVac, Super CoachVac HEPA, CoachVac, MegaVac, Super QuarterVac, Super QuarterVac HEPA, QuarterVac, LineVacer, Aviation Vac, Everest.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e waist belt, genuine OEM #100359.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e proper load distribution and a secure fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e check the buckle and stitching for wear during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits as a genuine OEM direct-fit belt. Confirm your model before ordering.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456296464634,"sku":"100359","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100359_8a678034-8f68-4fbc-b63f-b8a7df5cc324.jpg?v=1785153306"},{"product_id":"proteam-motor-mount-service-kit-pro-team-super-coach-100368","title":"ProTeam Motor Mount Service Kit Pro Team Super Coach","description":"\u003cp\u003eThe motor in a ProTeam backpack floats on rubber mounts, and this service kit renews them. Part 100368 contains three well nuts, three bolts, three washers and three covers, the full set of isolators for one cylinder-style backpack motor.\u003c\/p\u003e\u003cp\u003ePerished mounts are easy to diagnose by ear and by hand. The machine turns noticeably louder and buzzier on your back, and the vibration you used to feel faintly through the padding becomes a hard drumming. Left long enough, a motor that is no longer isolated works against its housing and the fasteners around it.\u003c\/p\u003e\u003cp\u003eBecause a motor change means disturbing these mounts anyway, most technicians fit a fresh kit at the same time rather than reusing rubber that has already hardened. It fits the ProTeam Super CoachVac, MegaVac, QuietPro BP, Super QuarterVac and AviationVac.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456296530170,"sku":"100368","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100368_13e498c0-0c76-4861-92fa-942ed7b3de12.jpg?v=1785142016"},{"product_id":"back-plate-connection-kit-proteam-quarter-vac-100374","title":"ProTeam Back Plate Connection Kit - QuarterVac Backpack","description":"\u003cp\u003eThe joint between the back plate and the vacuum body is a load point and a seal at the same time, and this connection kit, part 100374, supplies the hardware that holds both together on the ProTeam QuarterVac backpack vacuum.\u003c\/p\u003e\u003cp\u003eThat joint does double duty. Structurally, it is one of the main points where the harness weight transfers into the vacuum body, so worn or missing hardware lets the housing flex and shift as the operator moves through a shift. The same joint sits in the sealed airflow path, and because the entire airflow has to pass through that path on its way to the motor, a loose connection there opens a leak that shows up as reduced suction at the tool, even when the bag and filters are otherwise in good shape. The two problems tend to arrive together, since the same worn hardware that lets the housing flex is what breaks the seal in the first place.\u003c\/p\u003e\u003cp\u003eA QuarterVac that feels loose against the back plate, or that has lost suction with the filters and hose otherwise clean, is worth checking at this connection before anything else is replaced. Loose hardware here is also easy to miss during a quick visual check, since the housing can still look fully assembled while sitting slightly out of alignment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 100374\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam QuarterVac backpack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e back plate to vacuum body connection hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e loose-feeling back plate, reduced suction with clean filters\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch the kit against your QuarterVac's parts diagram before ordering if you are not certain this is the hardware configuration your machine uses, and compare the old hardware to the kit contents when it arrives.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456296562938,"sku":"100374","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100374_0c9f8659-db71-4ba3-a96a-7ad189090df4.jpg?v=1785157415"},{"product_id":"proteam-motor-with-crimps-provac-backpack-fits-coach-vacuum-122157-00-lamb-number-100422","title":"ProTeam Backpack Vacuum Motor with Crimps","description":"\u003cp\u003eThis is the ProTeam-numbered replacement for the Ametek Lamb motor found inside the ProVac backpack and its related models, sold with the wiring crimps already fitted so it drops in without re-terminating anything. ProTeam catalogs it as 100422; Lamb's own number for the same motor is 122157-00.\u003c\/p\u003e\n\u003cp\u003eWear on a motor like this rarely arrives without warning. Carbon brushes wear down gradually and suction fades along with them, a drying bearing raises the pitch toward a steady whine, and a failing armature starts giving off a hot odor within the first minute or two of running. Once that odor shows up, the motor has reached the end of its service life, and continuing to run it risks the wiring around it as well.\u003c\/p\u003e\n\u003cp\u003eNot every airflow complaint is the motor's fault. A clogged cartridge filter or a crushed section of hose can starve a healthy motor of the air it needs and make it sound underpowered even though nothing inside it has failed. Check those first, since replacing a good motor will not fix a restriction upstream of it.\u003c\/p\u003e\n\u003cp\u003eConfirm the Lamb number stamped on your current motor reads 122157-00 before ordering, since that number, rather than the name on the harness, is what identifies the right motor.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 100422 (Lamb 122157-00)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e crimp terminals pre-installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e TailVac, GoCartVac, QuietPro BP, AviationVac, LineVacer, CoachVac, Super CoachVac HEPA, ProVac, QuarterVac, Super QuarterVac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e gradual suction loss, rising whine, hot smell at startup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e confirm the Lamb number on the current motor; rule out a clogged filter or crushed hose first\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456296628474,"sku":"100422","price":117.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100422_041e5e72-8221-4f90-a23b-3ec640cb94b0.jpg?v=1785137459"},{"product_id":"proteam-carbon-brush-2-pack-sierra-back-pack-ametek-motor-100424","title":"ProTeam Carbon Brush Set - Sierra Backpack (Ametek Motor, 2 Pack)","description":"\u003cp\u003eThis genuine OEM ProTeam carbon \u003cstrong\u003ebrush set\u003c\/strong\u003e (part #100424) is a two-pack for the Ametek motor used in Sierra and related backpack vacuums. Carbon brushes carry current to the motor's spinning armature.\u003c\/p\u003e\u003cp\u003eCarbon brushes wear down with normal use, and once they run short the motor sparks, runs intermittently, or loses suction. Replacing worn brushes early keeps the commutator clean and can extend the motor's life. A fresh set restores steady current and full motor power.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam LINEVACER, PROVAC, Sierra, Super CoachVac HEPA, CoachVac, QuietPro BP, LineVacer ULPA (Ametek motor).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e carbon brush set, genuine OEM #100424.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e two brushes per pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e fit both brushes together and check the commutator for scoring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstalls as a genuine OEM set during motor service. Confirm your motor before ordering.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456296694010,"sku":"100424","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100424_0fe54bab-2a31-4f7c-9585-682c1ff0efc9.jpg?v=1785140038"},{"product_id":"proteam-provac-quarter-vacuum-tailvac-paper-bags-10-pack-micro-filter-alpine-100431","title":"ProTeam Micro Filter Paper Bags - 10 Pack (ProVac, Quarter Vacuum, TailVac)","description":"\u003cp\u003eThese micro filter bags fit ProTeam's 6 quart backpack vacuums and come ten to a pack as part 100431. Each bag holds 496 square inches of filter media, and the micro-grade paper traps fine dust that would otherwise load the motor filter behind it. They are disposable and are not meant to be emptied and reused.\u003c\/p\u003e\u003cp\u003eProTeam's own guidance is to change the bag at about three-quarters full. Push past that and airflow falls away quickly, the machine sounds strained, and grit starts finding its way through to the filters and the motor. When a machine on your floor is being called weak, the bag is the first thing to check and usually the answer.\u003c\/p\u003e\u003cp\u003eThey fit the ProTeam ProVac, QuarterVac, Super QuarterVac and Super QuarterVac HEPA, AviationVac, TailVac, QuietPro BP, GoCartVac and GoVac BP.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456296923386,"sku":"100431","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100431_49e298f9-662d-4cad-818d-a853a98a0b3c.jpg?v=1785140856"},{"product_id":"proteam-provac-black-hose-pro-team-backpack-both-end-of-the-hose-are-the-same-100505","title":"ProTeam Provac Black Hose Pro Team Backpack - Both End of the Hose Are the Same","description":"\u003cp\u003eThis is the black replacement hose for the ProTeam ProVac backpack, part 100505. Both ends carry the same cuff, so it can be fitted either way round with no hunting for the machine end.\u003c\/p\u003e\u003cp\u003eHoses on backpack vacuums lead a hard life. They are stepped on, dragged around door frames and flexed at the cuff thousands of times a shift, and they usually fail from the machine end outward. A split hidden under the cuff behaves exactly like a blocked machine: the tool end goes quiet, the motor note stays high, and no amount of bag changing brings the suction back. Run your hand along the hose with the vacuum running and you will often hear the leak before you find it.\u003c\/p\u003e\u003cp\u003eIt fits the ProTeam ProVac and ProVac FS 6, and the Super Coach Pro 6 and Super Coach Pro 10.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456296988922,"sku":"100505","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100505_a6e941cc-0e71-4441-b939-07967919bf93.jpg?v=1785152111"},{"product_id":"proteam-cloth-filter-gocart-vacuum-fits-quarter-vacuum-100564","title":"ProTeam Reusable Cloth Filter Bag - GoCart Vacuum, Quarter Vacuum","description":"\u003cp\u003ePart 100564 is the reusable 6 quart cloth filter bag for ProTeam's smaller backpack vacuums. It sits between the paper bag and the motor as a second stage of filtration, and unlike the paper bags it is emptied, shaken out and put back rather than thrown away.\u003c\/p\u003e\u003cp\u003eCloth bags still wear. Seams open, the fabric thins where it folds against the housing, and years of fine dust eventually clog the weave so the machine never quite breathes properly again. If a backpack runs weak with a new paper bag and a clean filter, hold the cloth bag up to the light; if you cannot see through it, it has stopped filtering and started restricting.\u003c\/p\u003e\u003cp\u003eIt fits the ProTeam ProVac, QuarterVac, Super QuarterVac, TailVac, QuietPro BP, AviationVac, GoCartVac and GoVac BP.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456297218298,"sku":"100564","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100564_3208cd67-6bc0-476f-b554-67e630b8ab07.jpg?v=1785156860"},{"product_id":"proteam-cloth-bag-10qt-pro-team-back-pack-100565","title":"ProTeam Cloth Bag 10QT Pro Team Back Pack","description":"\u003cp\u003eThe 10 quart cloth filter bag, part 100565, is the reusable inner bag for ProTeam's larger backpack vacuums. The paper bag drops inside it; the cloth bag is the layer that stays in the machine and catches whatever gets past.\u003c\/p\u003e\u003cp\u003eBecause it is reusable, it tends to be forgotten. A cloth bag that has been in service for years is stiff with fine dust, and all of that is airflow the motor has to fight for. Shake it out whenever you change the paper bag, wash it occasionally, and let it dry completely before it goes back in, since a damp bag will smell and will blind off far faster than a dry one.\u003c\/p\u003e\u003cp\u003eIt fits the ProTeam CoachVac, Super CoachVac, MegaVac and LineVacer 10 quart backpacks.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456297447674,"sku":"100565","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100565_bf79a95c-6057-4510-b573-d72281d2bc1e.jpg?v=1785156157"},{"product_id":"proteam-bumper-super-coach-backpack-100586","title":"ProTeam Bumper - Super Coach Backpack","description":"\u003cp\u003eStrapped to a back and swung through a building all shift, a backpack vacuum bumps into far more than the floor. Part 100586 is the molded ring that takes those hits, standing between the housing on the ProTeam Super Coach, QuietPro BP or AviationVac and every desk corner, door frame and stair rail it brushes past. Most of that contact happens without the wearer ever registering it.\u003c\/p\u003e\u003cp\u003eOnce the ring tears, goes brittle, or detaches outright, two surfaces stop being protected in the same moment. Hairline cracks start forming around the housing seams, and painted trim and baseboards around the building begin picking up scuff marks. Clients in contract cleaning situations tend to spot the second problem well before the first, and a scuffed wall reflects on the crew's reputation more than a scratched vacuum ever would.\u003c\/p\u003e\u003cp\u003eSwapping in a replacement ring is quick and inexpensive next to the cost of repainting a hallway or explaining housing damage to a customer. Coverage spans the Super Coach, QuietPro BP and AviationVac, and since checking the ring costs nothing extra during a motor or filter service, it is worth a glance any time the housing is already open.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 100586, protective bumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam Super Coach, QuietPro BP, AviationVac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e absorbs contact with walls, furniture and door frames so the housing does not take the impact directly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the bumper has torn, hardened, or separated from the housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall note:\u003c\/strong\u003e fit it the way the old bumper was mounted, checking it sits evenly the whole way around\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456297513210,"sku":"100586","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100586_775092f4-e6df-49cb-bfdc-f603848d9cde.jpg?v=1785140702"},{"product_id":"proteam-sound-muffler-pro-team-coach-vacuum-super-coach-100597","title":"ProTeam Sound Muffler - Coach Vacuum \/ Super Coach","description":"\u003cp\u003ePart 100597 damps motor exhaust noise inside ProTeam's CoachVac, MegaVac, and Super CoachVac backpacks, three machines engineered so a crew can clean occupied offices and lobbies during business hours without the noise itself becoming a complaint. The muffler is a big part of how that quiet running actually happens.\u003c\/p\u003e\u003cp\u003eThe usual reason to replace it is that the machine has gotten louder without anyone touching the motor. Mufflers crumble with heat cycling over time, or dust loads into the material until it restricts the exhaust path, and either way the motor ends up working harder while making more noise doing it. Stand near a tired unit partway through its shift and then near a fresh one of the same model; the gap in volume is not subtle.\u003c\/p\u003e\u003cp\u003eRestricted exhaust does more than raise the volume. A motor that has to push air out through a muffler partially blocked with dust also runs warmer and works harder for the same suction at the floor, so a machine overdue for a muffler swap is often quietly costing motor life on top of the noise it is generating.\u003c\/p\u003e\u003cp\u003eIt lives out of sight inside the housing, which makes it an easy part to overlook during a routine motor or filter service. Worth checking any time the machine is already open, since reassembling around a degraded muffler undoes the quiet running these models are chosen for in the first place.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 100597, sound muffler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam CoachVac, MegaVac, Super CoachVac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e damps motor exhaust noise inside the housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the machine has grown noticeably louder or the muffler material has crumbled\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456297578746,"sku":"100597","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100597_e4e7ff98-2add-4612-9373-697338ccb821.jpg?v=1785139384"},{"product_id":"proteam-backpack-squeegee-blade-100598","title":"ProTeam Backpack Squeegee Blade","description":"\u003cp\u003ePart 100598 replaces the worn blade in the squeegee tool that pairs with ProTeam backpack vacuum systems. A squeegee edge only works while it is intact and flat against the floor. Rubber that has hardened, picked up a nick, or curled away from the surface stops making even contact and leaves streaks or missed strips instead of a clean pull, no matter how carefully the operator guides the tool across the surface.\u003c\/p\u003e\u003cp\u003eRubber degrades with age and use whether or not the tool sees heavy work, so a blade that looks fine on the shelf can already be past its useful life if it has sat unused for a season or two. Flexing the blade by hand is a quick way to check: it should spring back cleanly rather than staying curled or showing a permanent set along its length.\u003c\/p\u003e\u003cp\u003eProTeam lists this blade as the replacement for its 14-inch squeegee tool, part 107199, so match it to that tool body when ordering, and installation is a simple swap once the old blade slides out of its channel. For crews running these tools daily, keeping a spare blade on hand means a job never stalls partway through a route over a worn edge. Store spares flat and out of direct sun, since heat and light age rubber even while it sits in the package.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 100598, squeegee replacement blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e makes flat contact with the floor to pull water or debris in a single clean pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the edge has hardened, nicked, or no longer springs back flat after flexing by hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam squeegee tool 107199, sold as the replacement blade for that tool body\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456297644282,"sku":"100598","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100598_55ff45a5-9637-49ed-b293-b7cdf50863ec.jpg?v=1785158018"},{"product_id":"floor-brush-14-nylon-proteam-backpack-1-12-inch-100623","title":"14\" Hard Surface Floor Tool with Nylon Brush - ProTeam, 1-1\/2\"","description":"\u003cp\u003eThis 14 inch ProTeam \u003cstrong\u003ehard surface floor tool\u003c\/strong\u003e (Part #100623) fits 1-1\/2 inch canister and backpack vacuum wands. Medium nylon bristles sweep a wide 14 inch path across tile, wood, concrete, vinyl, and linoleum that lacks a high-gloss finish.\u003c\/p\u003e\u003cp\u003eAs bristles flatten or break, the tool loses contact with the floor and leaves dust and larger debris behind. A cracked or warped body can also scratch bare surfaces. A fresh nylon floor tool restores full-width pickup and a clean sweep on every pass.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1-1\/2 inch standard canister or backpack wands\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e durable medium nylon bristles, slim low-profile head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e 14 inch cleaning path reaches under low furniture\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e hard floors without a high-gloss finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe tool slides onto a matching wand for tool-free installation. Confirm your wand diameter is 1-1\/2 inch before ordering to guarantee a snug, rattle-free fit.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456298004730,"sku":"100623","price":73.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100623_a48e8d22-7da7-4bbb-af31-f1ea5074194f.jpg?v=1785138580"},{"product_id":"proteam-back-pack-motor-lead-cord-85-inches-super-coach-100641","title":"ProTeam Back Pack Motor Lead Cord - 8.5 Inches - Super Coach","description":"\u003cp\u003eThis is the short internal motor lead for ProTeam backpack vacuums, part 100641, measuring 8.5 inches. It carries power from the switch and cord box to the motor terminals inside the housing. It is not the mains cord that plugs into the wall, so if that is what has failed, this is not the part.\u003c\/p\u003e\u003cp\u003eTechnicians reach for this lead during a motor change, or when a machine has an intermittent fault that comes and goes as it is jostled on someone's back. Heat and vibration harden the insulation where the lead runs close to the motor, and a chafed or brittle lead can arc, cut out under load, or trip the building's breaker.\u003c\/p\u003e\u003cp\u003eAlways unplug the machine before opening it. This lead fits the ProTeam CoachVac, Super CoachVac, MegaVac, LineVacer, ProVac, QuarterVac, QuietPro BP and AviationVac backpacks.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456298201338,"sku":"100641","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100641_738715e0-8d1b-4bc8-a730-b4428acff6ba.jpg?v=1785144707"},{"product_id":"proteam-swivel-short-proclean-cuff-1-12-100694","title":"ProTeam Swivel Cuff - 1.5 Inch, Short","description":"\u003cp\u003ePart 100694 is the 1.5 inch short swivel cuff that connects the hose to the wand or tool on ProTeam's commercial line, one of the most broadly used connector parts across the brand. It lets the hose rotate freely as the operator works instead of twisting back against itself with every turn.\u003c\/p\u003e\u003cp\u003eCompatibility runs across most of ProTeam's backpack and canister range: GoFree Flex Pro, GoFit 10, GoFit 6 Plus, GoFit 6, GoFit 3, 1073120, 1073110, TailVac, QuietPro CN, QuietPro BP, Sierra, ProClean, ProVac FS 6, ProVac, LineVacer, Super QuarterVac, QuarterVac, MegaVac, Super Coach Pro 10, Super Coach Pro 6, Super Coach, and CoachVac. Because the cuff shows up on so many models, confirming the model in hand before ordering matters more here than on a part with a shorter fitment list.\u003c\/p\u003e\u003cp\u003eReplace it when the cuff has cracked at the swivel joint or when it no longer rotates smoothly and instead drags or binds as the hose turns. Either fault restricts airflow right at the connection, which costs suction exactly where the operator needs it, at the floor tool.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 100694, swivel cuff, 1.5 inch, short\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam GoFree Flex Pro, GoFit 10, GoFit 6 Plus, GoFit 6, GoFit 3, 1073120, 1073110, TailVac, QuietPro CN, QuietPro BP, Sierra, ProClean, ProVac FS 6, ProVac, LineVacer, Super QuarterVac, QuarterVac, MegaVac, Super Coach Pro 10, Super Coach Pro 6, Super Coach, CoachVac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e rotating hose-to-wand connection point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e cracked at the joint or the swivel binds instead of turning freely\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhen fitting the new cuff, push it fully home and check that the swivel turns freely under a light pull before running the machine, since a partly seated cuff leaks at exactly the joint this part exists to keep sealed.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456298266874,"sku":"100694","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100694_475e15d6-7368-4eda-9024-cecb0b64d101.jpg?v=1785142426"},{"product_id":"horsehair-brush-insert-proteam-floor-tool-100714","title":"Horsehair Brush Insert - ProTeam 14\" Hard Floor Tool","description":"\u003cp\u003eThis \u003cstrong\u003ehorsehair brush insert\u003c\/strong\u003e (Part #100714) is the replaceable bristle strip for the ProTeam 14 inch hard floor tool, part 100614. Natural horsehair bristles glide across hard flooring and lift fine dust without scratching the surface.\u003c\/p\u003e\u003cp\u003eWith regular use the bristles wear down and stop making even contact with the floor, so the tool skates over dust instead of sweeping it up. Uneven bristles can also let the metal body touch bare wood. A new insert brings the brush face back to full height for consistent, gentle pickup.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam 14 inch hard floor tool (part 100614)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e natural horsehair bristle strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e gentle, scratch-free cleaning on wood and tile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e replace when bristles are worn or uneven\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe insert seats into the existing floor tool body, so no new wand or tool is needed. Inspect the tool housing for cracks while the worn insert is out.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456298397946,"sku":"100714","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100714_cdf5634b-1b53-48ad-b557-087eaf8df09a.jpg?v=1785149736"},{"product_id":"proteam-backpack-back-plate-screw-washer-kit-100716","title":"ProTeam Backpack Back Plate Screw \u0026 Washer Kit","description":"\u003cp\u003eEvery ProTeam backpack unit hangs its entire harness off one mounting plate, and part 100716 supplies the specific screws and washers that hold that plate to the housing. Nobody pays this hardware any mind until one goes missing, at which point the harness starts shifting with every step the operator takes.\u003c\/p\u003e\u003cp\u003eOnce a single fastener strips or falls out, the remaining screws absorb its share of the load and begin stripping in sequence, a chain reaction that ends with the plate working loose mid-route. For gear worn on the body rather than pushed across a floor, a loose mounting plate is more than an annoyance; it can shift unpredictably and catch an operator off balance. Using hardware sized and threaded to spec, rather than whatever fasteners are sitting in a parts drawer, is what keeps the housing threads from stripping out permanently.\u003c\/p\u003e\u003cp\u003eCoverage runs across a wide slice of the ProTeam line: AviationVac, Everest, QuietPro BP and ProVac, along with CoachVac and its Super and Super HEPA variants, plus QuarterVac HEPA and both Super QuarterVac trims. Given how many machines share this exact hardware, stocking a spare kit or two saves a trip back to the parts counter the next time a plate turns up loose.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 100716, back plate screw and washer kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam QuietPro BP, ProVac, AviationVac, Everest, plus the standard and Super HEPA versions of both CoachVac and QuarterVac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e fastens the back plate that the harness hangs from to the housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e a screw is missing or stripped and the plate shifts under load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall note:\u003c\/strong\u003e replace the full set rather than a single screw so remaining fasteners are not carrying uneven load\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456298430714,"sku":"100716","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100716_49f6e25b-c4ea-4f01-9cbe-e3ac99ce7ee2.jpg?v=1785148119"},{"product_id":"attachment-kit-proteam-backpack-restaurant-style-p1-kit-100727","title":"ProTeam Restaurant Style Attachment Kit for 1-1\/2 in. Backpack Vacuums","description":"\u003cp\u003eProTeam builds this kit for backpack vacuums running a 1-1\/2 in. tool connection, styled for restaurant and food-service accounts, cataloged as part 100727. It fits the ProTeam 4915 and other ProTeam backpacks built around the same fitting size.\u003c\/p\u003e\u003cp\u003eKits in this line are built around the cleaning a food-service floor plan actually needs: booth seating, tile and sealed concrete rather than open carpet, and tight gaps behind fixed fixtures that a household attachment set is not shaped for. What ships under this part number is set by ProTeam, so the detail to match before ordering is the connection size, because that is what decides whether the tools will seat on your machine at all.\u003c\/p\u003e\u003cp\u003eEvery tool built for this kit uses the 1-1\/2 in. connection, which is standard across a range of ProTeam backpacks but not universal, so measure your wand or hose cuff opening before ordering to confirm the fit. A backpack built around a different fitting diameter will not take these tools.\u003c\/p\u003e\u003cp\u003eAttachment kits like this see the most wear at the connection collars, from being swapped on and off between tools during a shift rather than left on one attachment. A collar that no longer seats snugly is usually the reason suction feels weaker on a specific tool even though the rest of the kit works fine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam 4915 and other ProTeam backpacks with 1-1\/2 in. fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection size:\u003c\/strong\u003e 1-1\/2 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for:\u003c\/strong\u003e restaurant and food-service floors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 100727\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456298496250,"sku":"100727","price":151.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/100727_a9e4836b-365c-498b-8717-a0445a18b38c.jpg?v=1785146946"},{"product_id":"proteam-hose-assembly-1-14-tailvac-101184","title":"ProTeam Hose Assembly 1-1\/4'' - TailVac","description":"\u003cp\u003eThis genuine ProTeam 1-1\/4 inch \u003cstrong\u003ehose assembly\u003c\/strong\u003e (Part #101184) is a black stretch hose with cuffs built for the ProTeam TailVac backpack. It carries airflow from the machine to your wand and tools, and it also fits the Super HalfVac Pro.\u003c\/p\u003e\u003cp\u003eStretch hoses crack at the cuffs and develop pinholes along the ribs over time, and any breach bleeds off suction before it reaches the floor. Loose or split cuffs also pull free mid-clean. A new genuine hose restores a sealed airway and steady suction end to end.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam TailVac; also fits Super HalfVac Pro\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e genuine OEM 1-1\/4 inch black stretch hose with cuffs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e secure connection and reliable airflow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e inspect both cuffs for cracks when suction drops\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe cuffs press onto the matching ports for a straightforward swap. Confirm your model uses the 1-1\/4 inch fitting before ordering to ensure a tight seal.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456298856698,"sku":"101184","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/101184.jpg?v=1785148918"},{"product_id":"hepa-filter-proteam-provac-sierra-everest-backpack-2-pack-101220","title":"ProTeam HEPA Filter, 2-Pack (ProVac \/ Sierra \/ Everest)","description":"\u003cp\u003ePart 101220 is a HEPA filter listed for three ProTeam backpacks: the ProVac, the Sierra and the Everest. It ships two to a pack rather than singly. Positioned at the very end of the airflow path, it matters especially in schools, clinics and offices, the settings where these backpacks typically run while people are still around.\u003c\/p\u003e\u003cp\u003eHEPA media saturates on a steady clock whether or not a machine looks dirty from the outside, and a saturated filter starts pulling down nozzle airflow long before anyone gets around to opening the housing to check it. On a backpack working commercial routes every day, a monthly look at the filter and a yearly or twice-yearly swap is a reasonable baseline.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e 101220, sold two to a pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam ProVac, Sierra, Everest\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect:\u003c\/strong\u003e monthly on machines in daily use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace:\u003c\/strong\u003e one to two times per year under normal commercial use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHaving the pair together means a fresh filter is sitting ready the moment the first one needs swapping out, which in practice tends to be the deciding factor between a filter changed right on time and one that gets knocked out, dusted off and pushed back in for another few weeks. Keep the spare somewhere clean and dry until it is needed, since a filter left loose on a shelf collects dust before it ever reaches a machine. A simple written log kept alongside the machine, noting the date of the last swap, keeps the schedule honest on a route where several people share the same backpack.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456298922234,"sku":"101220","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/101220.jpg?v=1785149967"},{"product_id":"proteam-1-12-two-piece-backpack-attachment-wand-101338","title":"ProTeam 1 1\/2\" Two Piece Backpack Attachment Wand","description":"\u003cp\u003eThe ProTeam 1-1\/2 inch \u003cstrong\u003etwo-piece backpack attachment wand\u003c\/strong\u003e (Part #101338, also #14-1904-66) is a replacement wand for the ProTeam 1912. Its two sections join to extend your reach and carry attachments during backpack cleaning.\u003c\/p\u003e\u003cp\u003eSmall wand parts such as buttons, springs, and clips wear over time, and a worn joint leads to loose connections or a wand that will not hold its length. A wand that separates under load interrupts cleaning. A fresh two-piece wand restores a tight, dependable fit between sections and tools.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ProTeam 1912\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e two-piece 1-1\/2 inch attachment wand (also #14-1904-66)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBenefit:\u003c\/strong\u003e secure connection and smooth length adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e check the button lock and spring when connections feel loose\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe sections press together and accept standard 1-1\/2 inch tools without modification. Verify your model and wand diameter before ordering for a secure match.\u003c\/p\u003e","brand":"ProTeam","offers":[{"title":"Default Title","offer_id":48456299020538,"sku":"101338","price":83.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/101338_79023b25-e1e1-4f8f-9835-2d53af72ca9a.jpg?v=1785137755"}],"url":"https:\/\/evacuumsandmore.com\/collections\/proteam-backpack-vacuums.oembed?page=17","provider":"Vacuums and More","version":"1.0","type":"link"}