{"title":"Sebo 300 Series","description":null,"products":[{"product_id":"axle-for-370-electronic","title":"SEBO Axle for the ELECTRONIC 370","description":"\u003cp\u003eOrdering the right axle for a 370 matters, because SEBO lists two of them. Part 2525 is the plain axle covered by this listing, while the pile adjustment shaft carries its own number, 2524. Both are used on the SEBO ELECTRONIC 370, and neither substitutes for the other.\u003c\/p\u003e\u003cp\u003eAn axle takes constant rotational load plus the occasional shock every time the machine is dragged over a threshold or bumped down a step. Wear concentrates where the shaft runs in its bearing faces, and it shows up as a wobble, a knock over hard floors, or components that no longer sit square on the shaft and start to run untrue. Once that happens the wear stops being confined to the axle: whatever it carries begins to wear at an angle, and a small part turns into a more involved repair.\u003c\/p\u003e\u003cp\u003eA straight, unworn axle puts the geometry back and stops that spreading. Check the shaft for scoring and for play at the ends before deciding, and if the fault lies with the height setting rather than the running gear, the part wanted is 2524 instead. Other 370 items worth inspecting while the machine is apart are the brush roller pulley 2458, the inner roller bearing 2467, the bumper 2522HG and the brush strip cover 2542.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2525, sold individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistinct from:\u003c\/strong\u003e the pile adjustment axle, part 2524\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e there is play, a knock over hard floors, or visible wear along the shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom it cures:\u003c\/strong\u003e components running untrue on a worn shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder note:\u003c\/strong\u003e quote 2525 so the plain axle is picked rather than the adjustment shaft\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO component supplied by an authorized dealer; ships in 2-5 business days. Searches for a SEBO 370 axle or an ELECTRONIC 370 shaft replacement both describe this number.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472274170,"sku":"2525","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1eebec18becacc80d67d70f369e1504a.jpg?v=1786669974"},{"product_id":"axle-for-dust-bag-lever-for-300-and-350","title":"SEBO Axle for the Dust Bag Lever - 300 and 350 MECHANICAL","description":"\u003cp\u003eEvery lever needs something to turn on. Part 50123ER is the axle the dust bag lever pivots around on the SEBO 300 MECHANICAL and 350 MECHANICAL, a small pin carrying a control that gets used at every bag change for the working life of the machine.\u003c\/p\u003e\n\u003cp\u003eWear here comes on gradually rather than as a clean failure. The bore opens up, the pin slackens, and the lever begins to sit crooked or move with more slop than it should, until eventually it will not hold its latched position at all. Operators describe it as the lever feeling sloppy or the bag not staying put, and the lever gets blamed and replaced while the worn pin underneath it goes back in. The axle costs a fraction of the parts it carries, so renewing both while the mechanism is open is the sensible order of work.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSEBO part number:\u003c\/strong\u003e 50123ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e the SEBO 300 MECHANICAL and 350 MECHANICAL uprights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e pivot pin for the dust bag lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGoes with:\u003c\/strong\u003e bag lever 50122OR and return spring 50124ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e a lever with play in it, sitting crooked or failing to latch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSits in:\u003c\/strong\u003e the release mechanism on the front of the dust bag compartment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThose three parts make up the release mechanism on the front of bag housing 50100SE, alongside bag holder 50125ER which locates the bag collar against the inlet. If the compartment is being stripped anyway, the mounting fitting 50131HG and the bumper base 50118HG along its lower edge are the neighboring items most often found damaged. Filter bags for these uprights are ordered as 5093AM, and the pre-motor filter behind safety catch 50205ER is stocked as 5036AM, 5425AM or 5812ER.\u003c\/p\u003e\n\u003cp\u003eGenuine SEBO hardware supplied by an authorized dealer; typically out the door inside 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472438010,"sku":"50123ER","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/50123ER.jpg?v=1709347661"},{"product_id":"axle-assembly-for-370-electronic-light-gray","title":"SEBO Axle Assembly for the ELECTRONIC 370 — Light Gray","description":"\u003cp\u003eShaft, wheel and mounting hardware arrive together in part 2630HG, the light gray axle assembly for the SEBO ELECTRONIC 370. Buying it made up renews the running gear in one operation instead of piecemeal.\u003c\/p\u003e\u003cp\u003eThis axle carries the weight of the machine on every stroke and takes a shock load each time the vacuum is bumped over a threshold or dropped the last inch onto a hard floor. A shaft that has bent, or a bore that has worn oval, turns into wobble and uneven rolling, and the extra load is then thrown at the plastics around it. The machine feels heavy, tracks badly, and can leave the nozzle sitting at the wrong height on one side.\u003c\/p\u003e\u003cp\u003eReplacing the whole unit removes any argument about which half had actually gone, which is the usual difficulty once a shaft and a bore have worn into each other. Note how the old assembly is oriented as it comes out, clear packed hair from around the shaft, and check the remaining wheels for wear while the machine is turned over.\u003c\/p\u003e\u003cp\u003eIndividual light gray wheels for this model are listed under 2614HG if only one wheel has failed and the shaft is sound. Anyone searching for a SEBO 370 axle or an ELECTRONIC 370 wheel and axle replacement is looking at this number.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2630HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e complete assembly with shaft, wheel and mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e wobble, uneven rolling or a machine that has become hard to push\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 2614HG complete wheel, 2543HG complete chassis\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO component from an authorized dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472536314,"sku":"2630HG","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/030fae07dd9a6d84645ea7023db5d302.jpg?v=1786670013"},{"product_id":"axle-with-wheel-for-300-and-350-light-gray","title":"SEBO Axle with Wheel for 300 and 350 Mechanical Uprights — Light Gray","description":"\u003cp\u003eHow a SEBO 300 Mechanical or 350 Mechanical rolls comes down to the axle under the back of the body, and part 50348HGER supplies that axle with its light gray wheel already mounted. Ordering it as a made-up assembly is the point: shaft and running surface are renewed together in a single fitting, with no pressing a bare wheel onto a worn spindle and hoping it runs true. SEBO carries it at position 125 in the exploded drawing that covers both machines.\u003c\/p\u003e\u003cp\u003eRear wheels on an upright take the whole weight of the machine every time it is pushed, tipped back, or hauled up a step, and they collect everything the floor has to offer. Hair and thread wind into the hub until the wheel drags instead of rolling. Grit works into the bearing surface and puts flat spots on the shaft. The tread hardens and eventually splits. The symptoms are easy to read: the vacuum limps or judders on a straight pass, one rear corner sits lower than the other, and hard flooring starts showing marks from a wheel that is no longer turning freely. None of that improves with cleaning once the shaft itself has worn.\u003c\/p\u003e\u003cp\u003eWheels wear as a pair, so hold the new assembly against the one on the opposite side before the machine goes back together — if the second wheel shows the same flats or the same play, change both and the vacuum will track straight again. With the back of the chassis open, it is also a sensible moment to look over the rear bottom plate, which is 50310HGER on the 300 Mechanical and 50311HGER on the 350 Mechanical.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder code:\u003c\/strong\u003e 50348HGER, SEBO axle and wheel assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e the 300 Mechanical and 350 Mechanical uprights from SEBO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShade:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 125\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e one axle with the wheel already fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the wheel drags, the tread is split, or the machine judders across a smooth floor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e axle clamp 2849, axle clamp 2014 (10-pack 2014ER), retaining ring 5424GS1 single or 5424GS in a 10-pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAuthorized-dealer SEBO running gear, on its way in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472601850,"sku":"50348HGER","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1e5524e1d607fdb79367e1dc4a1d9c39.jpg?v=1786669473"},{"product_id":"axle-for-pile-adjustment-wheels-for-370-comfort","title":"SEBO Pile Adjustment Wheel Axle for the 370 COMFORT","description":"\u003cp\u003eHeight selection on the SEBO 370 COMFORT rides on a single shaft. Part 20126ER is that shaft, the axle the pile adjustment wheels rotate around inside the cleaning head, and the component that decides whether a chosen setting stays chosen.\u003c\/p\u003e\u003cp\u003eBecause the height gets changed every time the machine moves from a rug to bare boards, this small part sees far more cycles than its size suggests. Bend it, or wear out the seats it turns in, and the wheels stop indexing cleanly: the setting wanders under load, the control goes vague underfoot, and the nozzle either scrubs the carpet or floats above it. A straight replacement axle brings the mechanism back to definite, repeatable steps.\u003c\/p\u003e\u003cp\u003eThe axle is listed for the 370 COMFORT. Height adjustment is one of the few mechanisms on an upright the user operates deliberately every session, which is why its parts wear at a rate that surprises people. Judging the shaft is simple once it is out: roll it across a flat surface and any bend shows itself immediately. If it is straight and the setting still wanders, the wear has moved into the wheels or into the lever that indexes them.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT\u003c\/li\u003e\n\u003cli\u003eFunction: carries the pile adjustment wheels in the cleaning head\u003c\/li\u003e\n\u003cli\u003eReplace when: the height setting will not hold, the wheels bind, or the shaft is visibly bent\u003c\/li\u003e\n\u003cli\u003ePart number: 20126ER\u003c\/li\u003e\n\u003cli\u003eCheck at the same time: the pile adjustment lever, part 20127ER, and its knob, part 20128ER\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAnything in the height mechanism is easiest to judge with the head already apart, so look over the lever, the knob and the wheels themselves before it all goes back together. Anyone searching for a SEBO 370 height adjustment shaft, a pile adjustment axle or a 370 COMFORT carpet height repair part is in the right place. Genuine SEBO stock, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472798458,"sku":"20126ER","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/20126ER.jpg?v=1709347662"},{"product_id":"pile-adjustment-axle-for-370-electronic","title":"SEBO Pile Adjustment Axle for the ELECTRONIC 370","description":"\u003cp\u003eHeight settings that drift back on their own, or a pile adjustment that turns without changing anything, usually mean the axle it acts through has worn or broken. Part 2524 is that axle on the SEBO ELECTRONIC 370.\u003c\/p\u003e\u003cp\u003ePile adjustment raises and lowers the cleaning head so the brush sits correctly in the carpet. Too high and the roller skates over the surface, leaving the grit down in the pile; too low and it drags, loading the motor and wearing the bristle strip flat in a fraction of its normal life. This axle is the shaft that carries the adjustment motion across to the head, so everything the control does has to pass through it. When it wears at the bearing faces or shears outright, the link between control and head is lost, and the setting either slips under load or stops responding at all.\u003c\/p\u003e\u003cp\u003eRenewing the axle gives back a positive, repeatable height setting, and the difference is obvious on the first pass over cut pile. Take care with the number: SEBO lists two axles for this machine, and the plain one is 2525. They are not interchangeable, so quote 2524 for the pile adjustment shaft. If the strip itself has worn flat rather than the setting drifting, the height control is not the fault to chase.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2524\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart supplied:\u003c\/strong\u003e pile adjustment axle, sold singly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCures:\u003c\/strong\u003e a height control that slips, drifts, or feels disconnected from the head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot to be confused with:\u003c\/strong\u003e the separate axle listed as 2525\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated 370 spares:\u003c\/strong\u003e brush strip cover 2542, brush roller pulley 2458, inner roller bearing 2467\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO spare from an authorized dealer; ships in 2-5 business days. A search for a SEBO 370 pile height adjuster shaft or an ELECTRONIC 370 pile adjustment axle lands on this part.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472831226,"sku":"2524","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/f24581052d975e814cc4239a61c40ee0.jpg?v=1786669971"},{"product_id":"pile-adjustment-axle-for-g-series-300-and-350","title":"SEBO Pile Adjustment Axle for G Series and 300\/350 Uprights","description":"\u003cp\u003eEvery notch of carpet height on these uprights is carried by a single shaft. Part 2861 is that shaft: the pile adjustment axle shared by the SEBO ESSENTIAL G1, ESSENTIAL G2, ESSENTIAL G4 and ESSENTIAL G5 and by the 300 MECHANICAL and 350 MECHANICAL, drawn at position 118 on the SEBO 300\/350 Mechanical sheet.\u003c\/p\u003e\u003cp\u003eTurning the height control rotates this axle, and the axle in turn sets how far the nozzle drops toward the floor. Everything else in the mechanism — the thrust members, the spring, the clamps, the rubbing plate — exists to hold it steady and let it index cleanly. An axle that has been bent, or worn where it passes through its bearing points, tends to bind at one end of its travel, or to leave the nozzle sitting lower on one side than the other so the brush grooms unevenly and one edge of the head wears its strip away first. A machine that will only hold the deepest setting, or that fights the operator halfway through the range, is showing the same fault.\u003c\/p\u003e\u003cp\u003eThe parts that ride on this axle are inexpensive and are already exposed once the chassis is open, so there is little sense refitting tired ones: clamp 2856 captures the spring, spring 2867 loads the assembly, thrust member 2834 bears on the axle with 2833 serving the knob, rubbing plate 2869HG is the sacrificial face, axle clamp 2849 retains the pile wheel axle, and pile adjustment wheel 5174HG completes the set. Common searches are SEBO pile adjustment axle, G series carpet height shaft and 300 MECHANICAL height adjustment axle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSEBO part 2861 — pile adjustment axle\u003c\/li\u003e\n\u003cli\u003eFits: SEBO ESSENTIAL G1, G2, G4 and G5, plus the 300 MECHANICAL and 350 MECHANICAL\u003c\/li\u003e\n\u003cli\u003eParts-diagram position: 118 on the SEBO 300\/350 Mechanical sheet\u003c\/li\u003e\n\u003cli\u003eTypical symptom: height control binding, or a nozzle sitting lower on one side\u003c\/li\u003e\n\u003cli\u003eRelated hardware: 2856 clamp, 2867 spring, 2834 and 2833 thrust members, 2869HG rubbing plate, 2849 axle clamp, 5174HG pile adjustment wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine SEBO\u003c\/strong\u003e; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472863994,"sku":"2861","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2861.jpg?v=1785154258"},{"product_id":"bearing-block-l-h-for-370-electronic-and-et-c","title":"SEBO Bearing Block Left Hand - 370 \u0026 ET-C","description":"\u003cp\u003eEvery SEBO ET-C power head carries its brush roll in a pair of plastic bearing blocks, and this is the left-hand one, ordered as part 2091. It fits the ET-C power heads and the Electronic 370.\u003c\/p\u003e\u003cp\u003eBearing blocks are the first thing to wear in a power head that has run for years. The brush roll starts to grind or whine, one end sits lower than the other, the roller wobbles instead of turning true, and the belt begins to track off center. Left alone, a collapsing block will chew up the brush roll end cap as well.\u003c\/p\u003e\u003cp\u003eFit it with the brush roll out: lift the roller, swap the block, drop the roller back in and check that it spins freely by hand. This is the left side only, so if both ends feel rough, order the right-hand block at the same time.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472929530,"sku":"2091","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2091.jpg?v=1785156494"},{"product_id":"bearing-block-l-h-for-300-and-350-light-gray","title":"SEBO Left-Hand Brush Roll Bearing Block for 300 and 350 Mechanical — Light Gray","description":"\u003cp\u003eOn a SEBO 300 Mechanical or 350 Mechanical the brush roller turns in a block at either end, and part 50355HG is the light gray one on the left. It gives the shaft a low-friction seat so the roller can spin all day without loading up the belt. Its opposite number is 50356HG, and one will not stand in for the other, so check which side you are holding before ordering.\u003c\/p\u003e\u003cp\u003eBearings turn every second the machine runs, so wear here is a question of when rather than whether. A tired left-hand block announces itself in three ways: a growl or rumble from the head that rises with brush load, a roller you can rock or lift by hand once the head is open, and bristle rows that have worn down more on one side than the other. Left alone, the play spreads. The roller leans, the belt runs off-centre and heats up, and the drive works harder to turn a brush that is dragging in its seat. A new block quiets the head and puts the roller back on a true axis.\u003c\/p\u003e\u003cp\u003eBearing blocks protect far larger components than themselves, so most technicians replace both ends at the same visit and clear wound hair out of the roller shafts while the head is open. If the belt has been running against a leaning roller, renew belt 5110 at the same time. The roller itself is 50470ER on the 300 Mechanical and 50471ER on the 350 Mechanical.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 50355HG, genuine SEBO bearing block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e left hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 300 Mechanical and 350 Mechanical uprights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShade:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e gives the left side of the roller shaft its running seat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptoms:\u003c\/strong\u003e growling power head, roller play, uneven bristle wear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching and related parts:\u003c\/strong\u003e right-hand block 50356HG, belt 5110, brush rollers 50470ER and 50471ER, brush strip cover 50352HG\u003c\/li\u003e\n\u003cli\u003eFactory SEBO stock, not a copy, moving in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473158906,"sku":"50355HG","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3b7a2d34847a1b4f187fba37745aadc0.jpg?v=1786669477"},{"product_id":"bearing-block-r-h-for-370-comfort","title":"SEBO Right-Hand Bearing Block for the 370 COMFORT","description":"\u003cp\u003eA grinding or rumbling note from the right-hand end of the brush roll usually means the bearing block on that side has reached the end of its life. Part 20117ER is the right-hand bearing block for the SEBO 370 COMFORT, the seat the roll turns in.\u003c\/p\u003e\u003cp\u003eThe block is working whenever the roller is, and it sits exactly where hair and fine grit collect once they have worked past the end of the shaft. Worn, it drags on the roll, adds load to the motor and the belt, and lets the roller wobble instead of sweeping evenly across the full width of the nozzle. Left long enough it takes the belt and the roller with it. A new block puts the roll back on a true, quiet seat and takes the extra load off everything driving it.\u003c\/p\u003e\u003cp\u003eThis is the right-hand block specifically, so establish which end the noise is coming from before ordering, or cover both ends if the roller has been in service a long time. It is listed for the 370 COMFORT. Bearing failure is progressive rather than sudden: the roller becomes slightly stiffer to spin by hand, then noisy, then loose, and each stage loads the belt driving it a little more. Catching it at the stiff stage usually saves the belt as well.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT\u003c\/li\u003e\n\u003cli\u003ePosition: right-hand end of the brush roll\u003c\/li\u003e\n\u003cli\u003eReplace when: the roller is noisy, stiff to turn by hand, or has play at the end\u003c\/li\u003e\n\u003cli\u003ePart number: 20117ER\u003c\/li\u003e\n\u003cli\u003eRelated: 20123ER left-hand bearing block cover, 20120ER brush roller release button, 20121 release spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBearings age at much the same rate at both ends, so check the opposite side while the roller is out and clear the wound thread off the shaft before it goes back in. Anyone searching for a SEBO 370 brush roll bearing, a 370 COMFORT bearing block or a noisy brush roller repair part is looking at the right number. Genuine SEBO component, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473421050,"sku":"20117ER","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/20117ER.jpg?v=1785149120"},{"product_id":"bearing-block-r-h-for-300-and-350-light-gray","title":"SEBO Right-Hand Brush Roll Bearing Block for 300 and 350 Mechanical — Light Gray","description":"\u003cp\u003eWorking as a pair with the block at the opposite end, part 50356HG seats the right-hand end of the brush roller in a SEBO 300 Mechanical or 350 Mechanical. SEBO draws it at position 109 on the parts sheet that covers both machines, which is the quickest way to confirm you are ordering the correct side before the head goes back together.\u003c\/p\u003e\u003cp\u003eA worn right-hand block gives itself away with a growl that rises as the brush loads up on carpet, or with a roller that can be rocked by hand once the sole plate is off. Play at one end never stays at one end. The roller starts running out of square, the belt tracks toward one flange and warms up, and the bristle row wears at an angle so the machine cleans unevenly across its width. Renewing the block restores a square, quiet roller and takes the side load back off the drive.\u003c\/p\u003e\u003cp\u003eBecause both blocks live in the same dust and run the same hours, they usually wear together — inspecting the left-hand block 50355HG at the same visit saves stripping the head twice. Clear hair from the shaft ends before the new block goes on, check belt 5110 for glazing while the roller is out, and refit the light gray brush strip cover 50352HG once the assembly is closed up. The roller itself is 50470ER on the 300 Mechanical and 50471ER on the 350 Mechanical.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 50356HG, genuine SEBO bearing block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide and finish:\u003c\/strong\u003e right hand, light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 300 Mechanical and SEBO 350 Mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 109\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the head growls under load or the roller rocks in its seat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion part numbers:\u003c\/strong\u003e left-hand block 50355HG, belt 5110, brush strip cover 50352HG, brush rollers 50470ER and 50471ER\u003c\/li\u003e\n\u003cli\u003eFactory SEBO stock held by an authorized dealer; delivery starts within 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473486586,"sku":"50356HG","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/634fd382e22a482d814e427fbcf24fa2.jpg?v=1786669482"},{"product_id":"drive-belt-for-370-electronic-and-et-c","title":"SEBO Drive Belt for ET-C Power Heads and ELECTRONIC 370","description":"\u003cp\u003eCarpet pile that stops lifting is the first hint a nozzle belt has stretched. Belt 2049 carries drive from the brush motor pulley across to the brush roll in the SEBO ET-C Power Heads and the SEBO ELECTRONIC 370, and it is sold as a single belt.\u003c\/p\u003e\u003cp\u003eRubber glazes, hardens and loses tension long before it ever snaps, which is why the loss of agitation creeps up unnoticed. A slipping belt lets the roll turn slower than the motor commands, so fine grit stays down in the pile even though the suction at the hose feels perfectly normal. That is the trap with this fault: every test an owner naturally reaches for, hand over the nozzle, hose off the machine, points at a vacuum that is working properly, while the one thing that has failed is the part doing the brushing.\u003c\/p\u003e\u003cp\u003eLook the belt over every time the roll comes out for hair removal and change it at the first sign of shine, cracking or a flattened section. If a new belt fails quickly, the pulley or a bearing block is the more likely culprit rather than the belt itself — a grooved pulley face gives fresh rubber nothing to grip, and a worn block lets the roll run out of line so the belt tracks off its seat.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 2049, SEBO drive belt, sold as one belt\u003c\/li\u003e\n\u003cli\u003eFits: SEBO ET-C Power Heads\u003c\/li\u003e\n\u003cli\u003eFits: SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003eFunction: transfers drive from the brush motor pulley to the brush roll\u003c\/li\u003e\n\u003cli\u003eReplace when: agitation drops off, the belt is glazed or cracked, or the roll stalls under load\u003c\/li\u003e\n\u003cli\u003eRelated part numbers: motor pulley 2025, brush roller with strip 2030ER, bearing block 2047\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO rubber, correct length and tension for these nozzles; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214474043642,"sku":"2049","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2049.jpg?v=1785137985"},{"product_id":"belt-htd-ii-6-219-3m-for-x-and-g-series-and-300-350-sensor-to-bearing-block","title":"SEBO 219 3M HTD-II-6 Toothed Belt for X Series, G Series and 300\/350","description":"\u003cp\u003eToothed rather than flat, the 219 3M HTD-II-6 belt carries drive from the sensor across to the bearing block on SEBO uprights. Part 5110 is the genuine item, and it appears three times in SEBO's own drawings: position 154 on the AUTOMATIC X4\/X5 sheet, position 133 on the AUTOMATIC X7\/X8 sheet, and position 122 on the SEBO 300\/350 Mechanical sheet.\u003c\/p\u003e\u003cp\u003eRubber hardens with age whether a machine is worked daily or left in a cupboard between uses. Watch for teeth that have lost their square edges, cracking across the back of the belt, black dust around the pulleys, a squeal on start-up, or a brush that slows under load on deep carpet. A toothed belt that has begun to skip does not recover, and the missed teeth chew the pulley faces while you wait. Order by the 219 3M HTD-II-6 marking rather than by eye, since a belt of the wrong profile or pitch will either jump under load or run tight enough to load the bearings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e 219 3M HTD-II-6 toothed belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive path:\u003c\/strong\u003e sensor across to bearing block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram positions:\u003c\/strong\u003e 154 on the AUTOMATIC X4\/X5 sheet, 133 on the AUTOMATIC X7\/X8 sheet, 122 on the 300\/350 Mechanical sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X1, X2, X4, X4 Boost, X5, X7 Premium, X7 Pet and X8; ESSENTIAL G1, G2, G4 and G5; 300 MECHANICAL and 350 MECHANICAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e a single belt\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese uprights run two belts, not one. 5110 is the sensor to bearing block belt; the motor to sensor belt is 5463, and changing both at the same visit is the sensible move once either has aged. The pulleys they run on are motor pulley 5462 and sensor pulley 5117\/1. Anyone hunting a SEBO belt replacement for an X series or G series upright should also look at the brush roller while the base is open, since a glazed roller and a tired belt usually arrive together. Genuine SEBO belt, authorized dealer stock, out in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214475157754,"sku":"5110","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5110_9cb0692d-0728-40bf-9c70-e7ad932b399d.jpg?v=1785158277"},{"product_id":"belt-312-3m-htdii-6-for-x1-and-x2-motor-to-sensor-and-300-350","title":"SEBO Motor-to-Sensor Drive Belt 312 3M HTDII-6 for AUTOMATIC X1, X2 and 300\/350","description":"\u003cp\u003eToothed, not flat. Part 5379 is the 312 3M HTDII-6 belt that takes drive off the motor's pulley and delivers it to the Sensor unit of a SEBO AUTOMATIC X1 or X2 and on the SEBO 300 MECHANICAL and 350 MECHANICAL uprights.\u003c\/p\u003e\u003cp\u003eThese machines split the drive into two stages, and this belt is the first of them. The HTD tooth form is what makes that arrangement work: the teeth engage the pulley positively, so brush speed holds up under load instead of falling away the way a stretched rubber loop does when the roll digs into deep pile. Wear on a toothed belt looks different from wear on a plain one. The teeth round off at their roots, fine black dust collects around the pulleys, and the belt starts to jump under sudden load. What the owner hears first is usually a regular tick in time with the roll, or notices the brush bogging down on heavy carpet while the motor sounds unchanged. Left long enough, a tooth shears and drive stops altogether.\u003c\/p\u003e\u003cp\u003eBelts are consumables and are best treated as such. Renew this one while the machine is open for any other work in the same area, and look over the second stage at the same time: 5110 is the belt that runs on from the Sensor to the bearing block on these machines, and the pulleys themselves are catalogued as 5117\/1. The Sensor unit that this belt drives is 5382 on the AUTOMATIC X1 and 5383 on the AUTOMATIC X2.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X1 and AUTOMATIC X2; SEBO 300 MECHANICAL and 350 MECHANICAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5379\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt reference:\u003c\/strong\u003e 312 3M HTDII-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage:\u003c\/strong\u003e first of two, motor across to Sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e toothed HTD profile belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 5110 Sensor-to-bearing-block belt, 5117\/1 pulleys, 5382 and 5383 Sensor assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO drive belt, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214475223290,"sku":"5379","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5379.jpg?v=1785146393"},{"product_id":"front-bottom-plate-for-370-comfort-light-gray","title":"SEBO Front Bottom Plate for the 370 Comfort, Light Gray","description":"\u003cp\u003eThe face that rides against the floor takes more punishment than any other surface on an upright. Part 20204ER is the light gray front bottom plate for the SEBO 370 COMFORT, the leading section of the sole that meets the carpet or hard floor on every pass.\u003c\/p\u003e\u003cp\u003eScuffing is cosmetic and entirely normal. Gouges, warping and cracked edges are not. A distorted plate breaks the seal the nozzle needs against a hard floor, so air enters where it should not and the airflow that ought to be lifting soil at the front of the head leaks in around the damage instead. A sharp lip is worse still: on a finished timber or vinyl floor it will score a line on every stroke, and the marks do not come out.\u003c\/p\u003e\u003cp\u003eFitting a new plate brings a tired machine back to its original glide and pickup, and it is the natural moment to check the parts it sits beneath. With the plate off, the brush roller and its end bearings are in plain sight, and a roller with bristles worn back below the sole opening is going to need attention regardless of how good the new plate is.\u003c\/p\u003e\u003cp\u003eSearches for a SEBO 370 Comfort sole plate, front bottom plate or bottom plate replacement all land on this genuine light gray moulding, part 20204ER.\u003c\/p\u003e\u003cp\u003eOne thing worth knowing before ordering: this is the front section of the sole rather than the whole underside, so a machine damaged further back will need a different number. Hold the head upside down and confirm the damage sits on the leading plate, the piece that meets the floor first as the machine is pushed forward.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 20204ER, SEBO front bottom plate\u003c\/li\u003e\n\u003cli\u003eColour: light gray\u003c\/li\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT upright\u003c\/li\u003e\n\u003cli\u003eFunction: the leading floor-contact face of the cleaning head sole\u003c\/li\u003e\n\u003cli\u003eReplace when: the plate is gouged, warped, cracked at an edge, or has a lip sharp enough to mark hard floors\u003c\/li\u003e\n\u003cli\u003eCheck the brush roller and its end bearings while the plate is off\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO part; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214475321594,"sku":"20204ER","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/20204ER_c59fffd7-d878-4174-86cf-9b638a40752d.jpg?v=1785139789"},{"product_id":"front-bottom-plate-for-300-light-gray","title":"SEBO Front Bottom Plate for the 300 Mechanical Upright — Light Gray","description":"\u003cp\u003eAirflow through a power head depends on how tightly the sole plate holds the nozzle to the floor. On the SEBO 300 Mechanical that surface is part 50404HGER, the light gray front bottom plate carried as item 114 in the model's exploded drawing, and it is the piece that forms the front lip of the brush roll opening.\u003c\/p\u003e\u003cp\u003eScoring, cupping and hairline splits all do the same thing: they open a gap ahead of the brush roll and let air in where it does no cleaning work. Suction at the bristles falls away even though the motor sounds exactly as it always has, which is why a worn plate is so often missed. Bags get changed, filters get changed, and the machine still leaves fibres in the carpet. Meanwhile a roughened plate edge starts marking hard flooring on every pass. Setting a flat, unbroken plate back under the head closes the gap and puts the airflow over the carpet where it belongs.\u003c\/p\u003e\u003cp\u003eSole plates are cut per model, so match yours against the machine's data plate rather than by eye. While the head is over, check the wear parts around it: brush roller 50470ER with its brush strip 50415, belt 5110, and rear bottom plate 50310HGER. Pile adjustment axle 2861 and rubbing plate 2869HG sit in the same area and are worth a look at the same time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 50404HGER, genuine SEBO front bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e SEBO 300 Mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawing item:\u003c\/strong\u003e 114\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e sets the nozzle height and forms the front lip of the brush roll opening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the plate is scored through, cracked, or the machine has lost carpet pickup with a clean bag and filters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated 300 Mechanical part numbers:\u003c\/strong\u003e brush roller 50470ER, brush strip 50415, belt 5110, rear bottom plate 50310HGER, bumper 50313HG\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO, sold by an authorized dealer, with shipping in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214475518202,"sku":"50404HGER","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/50404HGER.jpg?v=1708929146"},{"product_id":"front-bottom-plate-for-350-light-gray","title":"SEBO Front Bottom Plate for the 350 Mechanical Upright — Light Gray","description":"\u003cp\u003eGouged, cupped or split along the leading edge, a worn sole plate costs a machine more suction than most owners would guess. Part 50434HGER is the light gray front bottom plate made for the SEBO 350 Mechanical, position 114 in that model's drawing, and it is the only component in permanent contact with the floor.\u003c\/p\u003e\u003cp\u003eThe plate does two jobs at once. It sets how close the nozzle rides to the carpet, and it forms the front lip of the brush roll opening. When it wears through, air slips in ahead of the bristles instead of being pulled through them, so the head is moving plenty of air and cleaning with very little of it. Owners notice fibres left behind on a second pass long before they think to turn the machine over. On hard floors the failure is more obvious: roughened plastic starts leaving scuff marks in the finish. A flat new plate restores the seal and the pickup that goes with it.\u003c\/p\u003e\u003cp\u003ePlates differ between models, so order against your machine's number rather than by shape. With the head over, the parts worth checking at the same time are brush roller 50471ER with its brush strip 2046, belt 5110, rubbing plate 2869HG and pile adjustment axle 2861. Bumper 50314HG and rear bottom plate 50311HGER take the same knocks and wear in the same conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 50434HGER, genuine SEBO front bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e SEBO 350 Mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 114\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e sets nozzle height and forms the front lip of the brush roll opening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the plate is scored through, cracked, cupped, or carpet pickup has dropped with clean bag and filters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated 350 Mechanical part numbers:\u003c\/strong\u003e brush roller 50471ER, brush strip 2046, belt 5110, rear bottom plate 50311HGER, bumper 50314HG\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO plate through our dealer account; 2–5 business days to ship\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214475550970,"sku":"50434HGER","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/befc0bf875e99ad503748a18524693d0.jpg?v=1786669545"},{"product_id":"rear-bottom-plate-with-screws-for-370-comfort-light-gray","title":"SEBO Rear Bottom Plate with Screws for the 370 COMFORT - Light Gray","description":"\u003cp\u003eScrews come in the box with this one. Part 20107ER is the rear bottom plate for the SEBO 370 COMFORT, finished in light gray and supplied with the fixings that hold it, so the panel and its screws are renewed together rather than a new plate going back onto tired threads.\u003c\/p\u003e\u003cp\u003eThe plate caps the rear section beneath the cleaning head and keeps that trailing edge sitting flat to the floor. Cracked at a screw hole, or warped after years of heat and abrasion, it lets the back of the housing lift and rock as the machine is pushed. The path behind the brush loses its seal and pickup on the back half of every pass drops away, a fault that gets blamed on the motor or the bag far more often than on a bent panel. A new plate and new screws pull the base down tight again.\u003c\/p\u003e\u003cp\u003eLight gray and the COMFORT model are the two things to confirm. The plate is listed for the 370 COMFORT specifically, and the screws supplied with it are the correct ones, which saves the usual hunt through a jar of fasteners at the end of a job. Because it is a floor-contact part, wear happens gradually and is easy to miss until the head starts rocking; laying a straight edge across the leading edge is the quickest way to judge whether it has had enough.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT\u003c\/li\u003e\n\u003cli\u003eColour: light gray\u003c\/li\u003e\n\u003cli\u003eIncludes: mounting screws\u003c\/li\u003e\n\u003cli\u003eReplace when: the plate is cracked at a fixing point, warped, or the rear of the head rocks on the floor\u003c\/li\u003e\n\u003cli\u003ePart number: 20107ER\u003c\/li\u003e\n\u003cli\u003eRelated underside parts: 20118ER brush strip cover, 20117ER right-hand bearing block\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA screwdriver is all the job asks for. Check the data plate before ordering, since the 370 range shares a family resemblance across its variants and this panel is listed for the COMFORT. Genuine SEBO parts, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214475976954,"sku":"20107ER","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/20107ER.jpg?v=1708929303"},{"product_id":"rear-bottom-plate-for-300-light-gray","title":"SEBO Rear Bottom Plate for the 300 Mechanical Upright - Light Gray","description":"\u003cp\u003eRear plates are model-specific on these mechanical uprights, so order by the badge on the machine rather than by how the panel looks. Part 50310HGER is the light gray plate specified for the SEBO 300 Mechanical, and SEBO records it at position 116 of the parts diagram as the rear bottom plate 300.\u003c\/p\u003e\u003cp\u003eThe plate closes the back of the nozzle underside and sets how the trailing edge meets the carpet. Worn thin against grit or cracked at a fixing point, it stops holding that edge down, the base begins to rock on the stroke, and pickup goes patchy behind the brush roll. The wear is gradual rather than dramatic, which is why it is usually found during a brush roll service rather than reported as a fault. A new plate restores both the seal and the ride height the nozzle was designed around.\u003c\/p\u003e\u003cp\u003eThe underside is worth doing as one job. The matching front panel for this machine is 50404HGER, brush roller release 50403HGER and brush roller mechanism 50470ER sit in the same head, and brush roller strip 50415 is the wear item that fits it. Bearing blocks 50355HG on the left and 50356HG on the right carry the roll, brush strip cover 50352HG closes over it, and belts 5110 and 5379 drive it. Chassis 50414HGER and power head cover 50401GSAM complete the model-specific list.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 50310HGER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 300 Mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 116, listed as rear bottom plate 300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e seals and levels the rear of the nozzle underside\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck it:\u003c\/strong\u003e whenever the machine is tipped over for a brush roll service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 50404HGER front bottom plate, 50403HGER brush roller release, 50415 brush roller strip, 50355HG and 50356HG bearing blocks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO stock through an authorized dealer, and the correct answer for a SEBO 300 Mechanical rear sole plate or bottom plate replacement. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214476337402,"sku":"50310HGER","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/50310HGER.jpg?v=1708929318"},{"product_id":"rear-bottom-plate-for-350-light-gray","title":"SEBO Rear Bottom Plate for the 350 Mechanical Upright - Light Gray","description":"\u003cp\u003eGrit left in a stripe behind the machine on the back stroke usually means the rear of the nozzle is no longer sitting down properly. Part 50311HGER is the light gray rear bottom plate cut for the SEBO 350 Mechanical, which takes a panel of its own rather than sharing one across the range.\u003c\/p\u003e\u003cp\u003eThis panel finishes the underside at the back of the power head and keeps the trailing lip against the floor, so air is drawn through the nozzle rather than under it. Wear here is slow, since the plate simply thins against carpet and hard flooring until the edge has rounded off, and that makes it easy to overlook until pickup has already suffered. Cracks around the fixing points do the same thing faster. Worth a look every time the machine is tipped over for brush roll work.\u003c\/p\u003e\u003cp\u003eThe rest of the underside on this machine is also model-specific, so note the numbers while it is upside down: 50434HGER is the front bottom plate, 50433HGER the brush roller release, 50444HGER the chassis and 50431GSAM the power head cover, with 2046 as the brush roller strip. Shared across the mechanical range are bearing blocks 50355HG and 50356HG, brush strip cover 50352HG, and belts 5110 and 5379.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 50311HGER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 350 Mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e seals and levels the rear of the nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e debris left behind on the back stroke, or a base that rocks on the floor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 50434HGER front bottom plate, 50433HGER brush roller release, 2046 brush roller strip, 50352HG brush strip cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO part from an authorized dealer. Searched for as a SEBO 350 Mechanical sole plate, rear base plate, or bottom plate replacement in light gray. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214476370170,"sku":"50311HGER","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/53f691adac678c37f53ccfa5136debf0.jpg?v=1786669533"},{"product_id":"metal-bottom-plate-set-with-ties-for-et-c-and-370-electronic","title":"SEBO Metal Bottom Plate and Ties for ET-C Power Heads and ELECTRONIC 370","description":"\u003cp\u003eUnderside protection comes as a set here. Part 2005ER is the metal bottom plate together with the ties that retain it, listed for SEBO ET-C power heads and the ELECTRONIC 370. The plate is the wear surface running along the floor beneath the brush section, and the ties are what hold it flat against the housing.\u003c\/p\u003e\u003cp\u003eMetal wears slowly, but it does wear. An old plate thins at the leading edge, picks up a curl where it has caught on a threshold, or loses the ties keeping it seated. Once it stops sitting true the nozzle rocks, the seal around the brush is lost, and pickup at the front of every pass falls off noticeably even though the motor and the filters are perfectly healthy. Renewing the plate and its fixings at the same time is the whole point of the set, because a good plate held by tired ties will not stay flat for long.\u003c\/p\u003e\u003cp\u003eTwo machines share this set: SEBO ET-C power heads and the ELECTRONIC 370. The ties are included because they are what hold the plate flat, and a plate only partly retained starts wearing unevenly from the moment it is fitted. If the frame the plate mounts to has cracked as well, the ET-C chassis is sold as a set with a plate of its own and is the more complete repair at that point.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO ET-C power heads and the SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003eIncludes: the metal bottom plate and its retaining ties\u003c\/li\u003e\n\u003cli\u003eReplace when: the plate is thinned at the front edge, bent, or no longer sits flush against the head\u003c\/li\u003e\n\u003cli\u003ePart number: 2005ER\u003c\/li\u003e\n\u003cli\u003eRelated: 2002SW, the ET-C chassis supplied as a set with a bottom plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWith the plate away from the head you get the clearest view there is of the brush strip and the belt, so check both before closing it up. Anyone searching for a SEBO ET-C sole plate, an ELECTRONIC 370 bottom plate or a metal base plate set has found the right number. Genuine SEBO parts, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214476796154,"sku":"2005ER","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2005ER.jpg?v=1785158052"},{"product_id":"bumper-for-370-comfort-light-gray","title":"SEBO Bumper for the 370 COMFORT - Light Gray","description":"\u003cp\u003eFurniture legs, skirting and door frames all meet the bumper before they meet anything else on the machine. Part 20109ER is that light gray trim for the SEBO 370 COMFORT, supplied as a genuine SEBO replacement.\u003c\/p\u003e\u003cp\u003eThe strip is meant to be the sacrificial piece and it does that job well until it hardens with age, splits, or loses the clips holding it in its channel. After that the upright's own housing collects the marks and passes them straight on to whatever it touches next. It is the sort of damage that accumulates unnoticed until someone finally looks at the skirting board in a hallway that gets vacuumed every day. A new bumper restores the buffer and smartens up the front of the machine at the same time.\u003c\/p\u003e\u003cp\u003eLight gray is the finish listed for the 370 COMFORT, and the shade is what separates this bumper from the equivalents used on other SEBO machines, so match it against the trim already on the vacuum. Fitting is a trim job with no tools of consequence involved. A bumper is also the part most often broken in storage or transit rather than in use, which makes a machine that has been moved between houses a likely candidate even when it is otherwise as new. Searches for a SEBO 370 bumper, a 370 COMFORT trim strip or a light gray bumper replacement all point here.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT\u003c\/li\u003e\n\u003cli\u003eColour: light gray\u003c\/li\u003e\n\u003cli\u003eReplace when: the trim is split, brittle, hanging loose or gone\u003c\/li\u003e\n\u003cli\u003ePart number: 20109ER\u003c\/li\u003e\n\u003cli\u003eRelated: 20107ER rear bottom plate with screws, also light gray, for the same machine\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe new trim takes the place of the worn one directly, with no adhesive involved. If you are unsure which 370 you own, check the data plate first, as this bumper is listed for the COMFORT. Searches for a SEBO 370 bumper, a 370 COMFORT trim strip or a light gray bumper replacement all point here. Genuine SEBO stock, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214477648122,"sku":"20109ER","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/20109ER.jpg?v=1709347851"},{"product_id":"bumper-for-370-electronic-light-gray","title":"SEBO Bumper for the ELECTRONIC 370 - Light Gray","description":"\u003cp\u003eBaseboards, chair legs and door frames take the punishment in daily cleaning, and the bumper is what stands between them and the machine body. Part 2522HG is the light gray bumper for the SEBO ELECTRONIC 370.\u003c\/p\u003e\u003cp\u003eThe bumper runs around the leading edge of the machine and absorbs contact so the housing does not. It is a consumable by design, which is why SEBO lists it on its own rather than only as part of a body assembly. Bumpers go hard with age, split at the corners where the contact loads concentrate, or work loose from their mounting until a length of it hangs off the edge of the housing. At that point it is doing neither job: furniture starts picking up marks, and the housing itself begins to scuff and chip where the bumper used to sit proud.\u003c\/p\u003e\u003cp\u003eFitting a fresh one puts a compliant edge back around the machine and tidies its appearance at the same time, which matters on a 370 that is otherwise sound. Get the color right when ordering, since light gray is a specific finish rather than a generic description. The other 370 wear items in the same family are the foot pedal 2528OR, the brush strip cover 2542, the pile adjustment axle 2524, the axle 2525, the brush roller pulley 2458 and the inner roller bearing 2467.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2522HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e absorbs contact with walls, furniture and door frames\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the strip is split, hardened, scuffed through or no longer seated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one bumper\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO part, authorized dealer stock, shipping in 2-5 business days. Searches for a SEBO 370 bumper or an ELECTRONIC 370 bumper strip replacement both describe this listing.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214477746426,"sku":"2522HG","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2522HG.jpg?v=1709347853"},{"product_id":"bumper-for-300-light-gray","title":"SEBO Bumper for the 300 Mechanical Upright - Light Gray","description":"\u003cp\u003eBaseboards, chair legs and door frames take a beating from a commercial upright, and the bumper is the only thing standing between them and hard plastic. Part 50313HG is the light gray bumper specified for the SEBO 300 Mechanical, shown at position 103 in the exploded parts diagram for that machine.\u003c\/p\u003e\u003cp\u003eBumpers stiffen with age and then split at the corners, which is where the impacts land. Once a length of trim has pulled away from the body, the housing starts collecting the marks itself, and a machine that still has years of service left in it begins to look tired to the people whose building it cleans. Replace the trim when it has gone brittle, when a corner has torn, or when a section no longer follows the line of the body.\u003c\/p\u003e\u003cp\u003eBumper part numbers are tied to the specific model on this range, so check the badge before ordering rather than matching by eye. The bag housing has its own cushioning at 50118HG, the bumper base, and the power head cover for this machine is 50401GSAM; if the shell underneath has already been marked, chassis 50414HGER is the panel behind it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 50313HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 300 Mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 103, bumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e absorbs contact with furniture and walls and protects the housing behind it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the trim is split, brittle, or lifting off the body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 50118HG bag housing bumper base, 50401GSAM power head cover, 50414HGER chassis\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO stock supplied by an authorized dealer, and the part behind searches for a SEBO 300 Mechanical bumper strip or upright bumper replacement in light gray. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214477779194,"sku":"50313HG","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/c35534386448fe49c65501fbd11cfbb5.jpg?v=1786669457"},{"product_id":"bumper-for-350-light-gray","title":"SEBO Bumper for the 350 Mechanical Upright - Light Gray","description":"\u003cp\u003eCut to its own dimensions, bumper 50314HG is the light gray trim that rings the SEBO 350 Mechanical and soaks up the daily contact with furniture, door frames and baseboards. It appears at position 103 of SEBO's exploded parts diagram for that upright.\u003c\/p\u003e\u003cp\u003eCheck the badge on the data plate before ordering, because bumper part numbers are tied to the specific model even where two machines look near enough identical from across a room. Age is what kills a bumper as much as impact: the material hardens, loses its give, and then tears at a corner on an ordinary knock it would have shrugged off when new. A section that has worked loose and stands away from the body is the last warning before it goes altogether.\u003c\/p\u003e\u003cp\u003eA bumper doing its job is what keeps a heavily used machine from marking every wall it passes, and it protects the panels behind it from taking the hit instead. Power head cover 50431GSAM and chassis 50444HGER are the parts that collect the damage once the trim has failed, and 50118HG is the separate bumper base that cushions the bag housing. Fitting is a body-off-the-floor job, so it pairs naturally with a look at the rear bottom plate, 50311HGER, and the brush strip cover, 50352HG, while the machine is already tipped over.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 50314HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 350 Mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 103, bumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e absorbs impacts and protects the housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the material has gone brittle, a corner has torn away, or a section has lifted off the body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 50118HG bag housing bumper base, 50431GSAM power head cover, 50444HGER chassis\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO part from an authorized dealer, listed for anyone searching a SEBO 350 Mechanical bumper, bumper strip or upright trim replacement. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214477910266,"sku":"50314HG","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/95be3218c9f67350b81d7f55aac0b737.jpg?v=1786669535"},{"product_id":"on-off-switch-button-for-370-series-gray-black","title":"SEBO On\/Off Switch Button for 370 Comfort and Electronic 370 — Gray Black","description":"\u003cp\u003ePresses that no longer give a clean click, or a button that stays sunk after being pushed, are what part 1830GS answers. It is the gray black on\/off cap used on the SEBO 370 Comfort and Electronic 370.\u003c\/p\u003e\u003cp\u003eThe cap absorbs every start and stop across the working life of the machine, and it fails in slow motion. Worn pivots let it sit crooked in its aperture so the press lands off-centre and the switch beneath it only sometimes trips. A split cap goes further and leaves that switch open to the dust it was moulded to keep out, which is how an intermittent fault turns into a permanent one. The distinction matters when diagnosing: a machine that starts on the second or third press has a problem at the cap far more often than an electrical fault below it.\u003c\/p\u003e\u003cp\u003eGray black is the finish for this control, and the replacement seats over the existing switch mechanism without any wiring work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e on\/off button cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats over:\u003c\/strong\u003e the existing switch mechanism\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1830GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e internal cable 1833UL and female contact holder 1836UL, the next things to test if the fault persists\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA cap that has gone missing entirely rather than cracked deserves the same treatment, since the switch beneath it is then exposed to dust every time the machine runs and the aperture edge is a poor thing to press with a fingertip. Searches for a SEBO 370 power button, a 370 Comfort on off switch cap or an Electronic 370 switch cover all describe 1830GS.\u003c\/p\u003e\u003cp\u003eGenuine SEBO through our authorized dealership, usually shipping in 2–5 business days. Clear the aperture of packed dust before fitting so the new cap can move freely in its bore, and press it home squarely. If the machine still fails to start reliably with a sound cap fitted, the switch body underneath is the next thing to test — unplug the vacuum before going any further.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214478106874,"sku":"1830GS","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/d3fc56ba85b21f964ed30ee80061e92e.jpg?v=1786669780"},{"product_id":"power-switch-button-for-300-and-350-orange","title":"SEBO Power Switch Button for 300 and 350 Mechanical Uprights - Orange","description":"\u003cp\u003eOne molded cap stands between the switch mechanism and everything the machine sweeps up. Part 50306OR is that cap in orange for the SEBO 300 Mechanical and the SEBO 350 Mechanical, the surface pressed to start and stop the vacuum.\u003c\/p\u003e\u003cp\u003eTwo things follow once the button splits or starts to bind in its aperture. Switching becomes a matter of pressing twice and hoping, and grit begins working its way down onto the switch body underneath, where putting things right becomes a much bigger job. A cap that has sunk below the surrounding panel, or one that stays down after a press, is already letting debris past. Fitting a fresh cap brings back a clean, definite press and closes the opening up again before anything gets into it.\u003c\/p\u003e\u003cp\u003eIf a new cap does not restore reliable switching, the fault is further in: 05112ER is the switch itself, 50371ER the switch rod that links the control to it, and 50443UL the switching unit. Orange marks the operating controls across these uprights, so this button sits in the same family as foot pedal 50330OR, bag lever 50122OR and the exhaust filter holder box 50216OR.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 50306OR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 300 Mechanical and SEBO 350 Mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e orange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e press cap covering and protecting the power switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the button is cracked, sticking, sunken, or no longer gives a clean click\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 05112ER switch, 50371ER switch rod, 50443UL switching unit, 50330OR foot pedal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO stock supplied by an authorized dealer. This is the part behind searches for a SEBO on off button, a 300 Mechanical power switch cap or a 350 Mechanical power button replacement. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214478172410,"sku":"50306OR","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0a858c83f3539128476a6f4208bbc5a3.jpg?v=1786669448"},{"product_id":"front-cover-release-for-370-series-dark-gray","title":"SEBO Front Cover Release Latch for 370 Comfort and Electronic 370 — Dark Gray","description":"\u003cp\u003ePress it, and the front cover should let go first time, every time. Part 1818GS is the dark gray release that does that job on the SEBO 370 Comfort and Electronic 370.\u003c\/p\u003e\u003cp\u003eOnce the sprung arm inside the moulding snaps, the fault goes one of two ways. Either the panel will not open at all, so bag changes turn into a wrestling match and the cover usually ends up damaged by the effort, or it will not stay shut and rattles free while the machine works. Both symptoms trace back to this one small component, and both get worse quickly because each failed attempt puts more load on what is left of the arm. The tell is the sound: a healthy release gives a definite click, and a broken one goes quiet before it goes altogether.\u003c\/p\u003e\u003cp\u003eDark gray is the finish used for this part, so it does not match the light gray body mouldings elsewhere on the machine — that contrast is original, not a sign of a previous repair.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e front cover release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnswers:\u003c\/strong\u003e a cover that sticks shut, or one that will not stay closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1818GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e its mounting seat is sold separately as holder 1819, and the complete front cover is 1846HG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTelling this apart from a failed seat is straightforward. Press the release and watch the moulding immediately around it: if the lever moves and the surround stays still, the release itself is at fault and 1818GS is the part; if the whole area flexes, the holder behind it has split and part 1819 belongs on the same order.\u003c\/p\u003e\u003cp\u003eGenuine SEBO, generally shipping in 2–5 business days. A broken release often takes its seat with it, so inspect the holder for splits before reassembly and order both if there is any doubt — the two together still make for a quick job, whereas discovering the second failure afterwards means stripping the front of the machine twice.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214478860538,"sku":"1818GS","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/9c93416fb7aca1471b6c4c76547baf63.jpg?v=1786669764"},{"product_id":"knob-for-pile-adjustment-for-370-comfort-light-gray","title":"SEBO Pile Adjustment Knob in Light Gray for the 370 Comfort","description":"\u003cp\u003eLight gray to match the rest of the 370 Comfort's trim, part 20128ER is the pile adjustment knob — the piece you actually take hold of when the flooring changes underfoot. It is the visible end of the height adjustment train, sitting outboard of the lever and the axle that do the work inside the head.\u003c\/p\u003e\u003cp\u003eKnobs get gripped hard and knocked against furniture legs, and the failure is cosmetic before it becomes functional: a chip, then a crack, then a knob that turns loose on its stem. From that point the height is being guessed at rather than selected, and a setting that once sat in a definite position becomes a vague place somewhere in the travel. A fresh knob restores a firm grip and a clean, repeatable position.\u003c\/p\u003e\u003cp\u003eColour is worth stating plainly, because on a part like this the finish is what separates one number from another. 20128ER is supplied in light gray, the shade SEBO used on the 370 COMFORT. Fitting it is a hand job rather than a bench job, and it is sensible to renew the knob at the same time as the lever or the axle when the whole adjustment mechanism is being gone through, since a tired knob on a new lever will feel no better than it did before.\u003c\/p\u003e\u003cp\u003eThe adjustment on this machine is manual, so the knob is not a decorative cap over a hidden mechanism — it is the handle that transmits your input into the head. That is why a knob spinning loose on its stem produces exactly the same complaint as a broken lever: the control moves and nothing else does. Checking which of the two has failed before ordering saves fitting the wrong part. If the knob turns and you can see the lever inside moving with it, the fault is further in; if the knob spins while the lever sits still, this is the part to order. Searches for a SEBO 370 Comfort height adjustment knob, a light gray pile adjustment knob or part 20128ER all land here.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 20128ER, SEBO pile adjustment knob\u003c\/li\u003e\n\u003cli\u003eColour: light gray\u003c\/li\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT upright\u003c\/li\u003e\n\u003cli\u003eFunction: the hand control that selects carpet pile height\u003c\/li\u003e\n\u003cli\u003eWorks with: pile adjustment axle 20126ER and pile adjustment lever 20127ER\u003c\/li\u003e\n\u003cli\u003eReplace when: the knob is cracked or chipped, or spins on its stem without moving the setting\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO part; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214480236794,"sku":"20128ER","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/ac85e274bbd5a7c08656c3dac4612cfd.jpg?v=1786669866"},{"product_id":"pile-adjustment-knob-for-370-electronic-light-gray","title":"SEBO Pile Height Adjustment Knob for the ELECTRONIC 370 — Light Gray","description":"\u003cp\u003eBrush height on the SEBO ELECTRONIC 370 is dialled in with this light gray knob, part 2622HG. Turning it moves the roller nearer to or further from the carpet so the bristles work the pile instead of stalling in it.\u003c\/p\u003e\u003cp\u003eKnobs of this kind fail in two ways. The splines round off, so the knob turns freely without moving anything behind it, or the detents wear flat and the setting creeps a notch at a time while you clean. Either fault leaves the brush at the wrong depth. Too high and the machine skates over deep carpet picking up very little; too low and it bogs down, drags on the belt and makes hard work of an open room.\u003c\/p\u003e\u003cp\u003eBecause the knob is the part your hand touches on every carpet change, it is also the part that gets levered, dropped on and eventually snapped. A fresh one puts positive, repeatable height selection back under your thumb, and it is a quick change with the machine unplugged and laid over.\u003c\/p\u003e\u003cp\u003eThe wheel the knob acts through is a separate item, 2608HG, and is worth checking at the same time: if a new knob turns cleanly but the setting still will not hold, that wheel is the next suspect. Anyone searching for a SEBO 370 pile height knob or a carpet height adjuster knob for an ELECTRONIC 370 is looking at this number.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2622HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e knob only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e sets brushroll depth to suit the carpet being cleaned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e a knob that spins without effect, or a setting that will not stay selected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 2608HG pile adjustment wheel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO spare from an authorized dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214480269562,"sku":"2622HG","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/c5e598e2b8288b3b3f05cf261e95147d.jpg?v=1786670003"},{"product_id":"release-button-for-exhaust-filter-cover-for-370-series-light-gray","title":"SEBO Release Button for the Exhaust Filter Cover - 370 Series, Light Gray","description":"\u003cp\u003eEvery exhaust filter change on a SEBO 370 begins with a press on this button. Part 1884HG is the light gray release for the exhaust filter cover on the 370 COMFORT and the ELECTRONIC 370, and between filter changes it is also the catch holding that cover shut while the machine runs.\u003c\/p\u003e\u003cp\u003eIt gets worked at every service and takes a knock whenever the vacuum is set down hard on its base. Once the button cracks or its catch face wears smooth, one of two things happens: the cover fights you on the way off, or it stops latching and works itself loose in use. A cover that is not held closed lets exhaust air out where it was never meant to go, and it can rattle its way open mid-clean. Renewing the button restores clean tool-free access and a cover that stays where it is put.\u003c\/p\u003e\u003cp\u003eColour and model are the two things to confirm before ordering. The button is listed in light gray for the 370 COMFORT and the ELECTRONIC 370, and that finish is what separates it from equivalent releases used elsewhere in the range. It sits on the outside of the filter cover rather than buried in the machine, so fitting it does not mean opening the body up. Where the cover itself has cracked as well, a new button on its own will not settle the problem.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT and ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003eFunction: releases and latches the exhaust filter cover\u003c\/li\u003e\n\u003cli\u003eColour: light gray\u003c\/li\u003e\n\u003cli\u003eReplace when: the button is cracked, the cover will not stay latched, or the cover has become hard to release\u003c\/li\u003e\n\u003cli\u003ePart number: 1884HG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is a sensible line to add when a fresh exhaust filter is already going on the order, so the cover assembly and the filter behind it are dealt with together. Anyone looking for a SEBO 370 filter cover release, an exhaust cover latch or a 370 COMFORT filter door button wants this part. Genuine SEBO stock, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214481055994,"sku":"1884HG","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/eadd6c6a5732e2530a1d2aa483c5dda8.jpg?v=1786669822"},{"product_id":"brush-roller-release-button-for-370-comfort-light-gray","title":"SEBO Brush Roller Release Button for the 370 COMFORT - Light Gray","description":"\u003cp\u003ePulling the brush roller out for a hair clean-out depends on one small component. Part 20120ER is the release button in light gray for the SEBO 370 COMFORT, and the same button locks the roller back down once it is in place.\u003c\/p\u003e\u003cp\u003eRoutine brush maintenance means working this button regularly, and in a house with pets or long hair that can be every few weeks. Eventually it cracks, or its catch face wears smooth. The roller then either fights being freed or refuses to sit locked afterwards, which lets it shift under load and pulls the belt out of line. A fresh button restores tool-free removal and a firm hold on the roller.\u003c\/p\u003e\u003cp\u003eLight gray and the 370 COMFORT are the two details to confirm before ordering. The button is reached from the underside with the roller out, so the job needs no more dismantling than the roller removal itself. Wear here is entirely predictable from how the machine is used: a household with pets works the release far harder than one without, and a button pressed thousands of times will show a polished, rounded catch face long before it actually cracks. Anyone searching for a SEBO 370 brush roller release or a 370 COMFORT roller catch has found the right part.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT\u003c\/li\u003e\n\u003cli\u003eFunction: releases and locks the brush roller\u003c\/li\u003e\n\u003cli\u003eColour: light gray\u003c\/li\u003e\n\u003cli\u003eReplace when: the roller is hard to remove, will not lock down, or the button is cracked or slack\u003c\/li\u003e\n\u003cli\u003ePosition: underside of the cleaning head, at the brush roller\u003c\/li\u003e\n\u003cli\u003ePart number: 20120ER\u003c\/li\u003e\n\u003cli\u003eOrder with: 20121 release spring, or 20121ER for a ten pack of the same spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe spring behind the release is a separate item and it wears over the same period, so the two are worth ordering together, since a new button on a tired spring will still feel vague. Genuine SEBO part, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214481350906,"sku":"20120ER","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5c109c4fe31b153db215f321ddd038bc.jpg?v=1786669844"},{"product_id":"brush-roller-release-for-300-light-gray","title":"SEBO Brush Roller Release for the 300 Mechanical Upright — Light Gray","description":"\u003cp\u003eClearing wound hair off the roller of a SEBO 300 Mechanical begins with this light gray release. Work part 50403HGER and the roller lifts straight out of the head; drop the roller back in and the same catch holds it down while the machine runs. It is a small part that decides whether roller maintenance is a two-minute job or a fight with a screwdriver.\u003c\/p\u003e\u003cp\u003eTwo kinds of wear show up here, and they pull in opposite directions. A release cracked at its pivot, or worn round at the catch face, may refuse to let go on the first attempt — so people lever at it and break something more expensive. The other failure is worse: a catch that lets go too easily, allowing the roller to creep in its seat while the brush is under load. That puts the roller out of square, drags the belt toward one flange and wears the bristle row unevenly. A fresh release restores clean removal and a firm hold in equal measure.\u003c\/p\u003e\u003cp\u003eThis release is cut for the 300 Mechanical and is model-specific, so confirm the machine on its data plate before ordering. With the roller out it is worth cutting away tangled hair, checking the bristle rows for flattening, and looking over the ends where they seat in bearing blocks 50355HG and 50356HG. The roller for this machine is 50470ER, its brush strip is 50415, and the drive belt is 5110.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 50403HGER, genuine SEBO brush roller release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e SEBO 300 Mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e latch that frees the brush roller and secures it once refitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the catch is cracked, sticks shut, or no longer holds the roller down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated 300 Mechanical part numbers:\u003c\/strong\u003e brush roller 50470ER, brush strip 50415, bearing blocks 50355HG and 50356HG, belt 5110, brush strip cover 50352HG\u003c\/li\u003e\n\u003cli\u003eSEBO-made, dealer-supplied, out the door in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214481678586,"sku":"50403HGER","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/73fab4f76ce0da0980155eee24d407b1.jpg?v=1786669492"},{"product_id":"brush-roller-release-for-350-light-gray","title":"SEBO Brush Roller Release for the 350 Mechanical Upright — Light Gray","description":"\u003cp\u003eGetting the roller out of a SEBO 350 Mechanical for a hair clear-out depends on this catch working properly. Part 50433HGER is the light gray release built for the 350, listed at position 108 in SEBO's own drawing, and it is the difference between a roller that drops out in seconds and one that has to be persuaded.\u003c\/p\u003e\u003cp\u003eWear shows up in two directions. Either the release will not let go on the first try, and someone levers at it until a tab breaks, or it lets go too readily and the roller creeps in its seat while the brush is loaded. The second is the more expensive fault, because a roller that will not stay square pulls the belt to one side, heats it, and wears the bristle row unevenly across the head. Neither is worth living with on a machine that gets stripped for cleaning as regularly as this one does. A new release restores clean removal and a firm hold in the same fitting.\u003c\/p\u003e\u003cp\u003eThe release is model-specific, so confirm yours before ordering. While the roller is out, cut away wound hair, look over the bristle rows for flattening, and check the ends where the shaft seats in bearing blocks 50355HG and 50356HG. The 350 Mechanical takes brush roller 50471ER with brush strip 2046, belt 5110 drives it, and brush strip cover 50352HG closes the end of the assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 50433HGER, genuine SEBO brush roller release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e SEBO 350 Mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawing item:\u003c\/strong\u003e 108\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e latch that releases the brush roller and holds it down in service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the catch sticks, is cracked at the pivot, or lets the roller move under load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated 350 Mechanical part numbers:\u003c\/strong\u003e brush roller 50471ER, brush strip 2046, bearing blocks 50355HG and 50356HG, belt 5110\u003c\/li\u003e\n\u003cli\u003eSEBO original equipment, dealer-supplied, moving in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214481744122,"sku":"50433HGER","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/718cb82061b2ac730560c1ea9e1eeb76.jpg?v=1786669541"},{"product_id":"grommet-single-for-g-and-370-series-light-gray","title":"SEBO Cord Grommet for ESSENTIAL G and 370 Series — Light Gray, Single","description":"\u003cp\u003eOne light gray liner, part 5359HG, for the cord and cable pass-throughs on SEBO's ESSENTIAL G uprights and on the 370 series. It is the single-unit version of the grommet the ESSENTIAL G4\/G5 drawing places at item 3, in among the handle, the power supply cord and the switch — which is to say, in the part of the machine that gets moved most.\u003c\/p\u003e\u003cp\u003eThe liner holds the cable clear of the moulded rim it has to cross. Once it splits, hardens or falls away, the cable settles onto that rim, and the flexing that occurs every time the handle is raised or lowered pulls the jacket over the same fixed edge. Damage of that sort starts as a shiny band, progresses to a flattened section, and ends with braid or insulation showing, at which point the cable rather than the liner becomes the job.\u003c\/p\u003e\u003cp\u003eOrder a single when one pass-through has gone and the others are still supple and still gripping their panels. When the rubber has aged right across the machine, the ten-pack of the identical liner is listed under 5359HE. Either way, unplug at the wall before opening any panel carrying cable, and check the exposed run end to end while it is in front of you.\u003c\/p\u003e\u003cp\u003eFitting is a push-and-seat job: the liner compresses into the hole and the flange holds it against the panel, so a grommet that will not stay put is either the wrong size or going into a hole that has been enlarged by wear. The cable clamp listed at item 8 on the same drawing, part 5162, is the companion piece that takes strain off the run once it is through.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO ESSENTIAL G1, G2, G4 and G5; SEBO 370 COMFORT and ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5359HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e moulded rubber cable liner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e one grommet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTen-pack:\u003c\/strong\u003e 5359HE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO part, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214484889850,"sku":"5359HG","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/74edd2789e1aad198665f7932b5a9797.jpg?v=1786669337"},{"product_id":"grommet-10-pack-for-g-and-and-370-series-light-gray","title":"SEBO Cord Grommet for ESSENTIAL G and 370 Series — Light Gray, 10 Pack","description":"\u003cp\u003eLight gray to suit the paler housings on SEBO's ESSENTIAL G and 370 machines, part 5359HE covers ten cord grommets in one order. The ESSENTIAL G4\/G5 parts drawing carries the grommet at item 3, sitting right among the components that make up the handle and the cord entry: the handle with cable at item 1, the power supply cord at item 4, the switch at item 5 and the cable clamp at item 8. That grouping tells you exactly where these liners live and why they see so much movement in service.\u003c\/p\u003e\u003cp\u003eEach one occupies the hole in the moulding that a cable passes through, standing between the jacket and a hard plastic rim. Rubber that has stiffened with age gives up long before it actually falls out of the panel. It loses the interference fit keeping it in place, the cable begins to shift against a bare edge, and the sheath wears from the outside in through nothing more dramatic than the everyday flexing that happens at the handle.\u003c\/p\u003e\u003cp\u003eRenewing the whole set while a machine is open takes barely longer than doing one and saves returning to each of the others as it hardens in turn. Unplug at the wall before starting. Treat any cable showing a flattened or shiny band as a separate matter in its own right, since a grommet cannot repair damage that has already been done to a jacket.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO ESSENTIAL G1, G2, G4 and G5; SEBO 370 COMFORT and ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 10 grommets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5359HE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e item 3, ESSENTIAL G4\/G5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle unit:\u003c\/strong\u003e 5359HG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA pack this size also covers the machine that comes in next week, which is why service benches order the ten rather than counting out singles. Genuine SEBO grommets, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214485217530,"sku":"5359HE","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/9c29e43dcd24cf8911c4b6b5f34fe08f.jpg?v=1786669332"},{"product_id":"power-supply-cord-for-370-series-dark-gray","title":"SEBO Power Supply Cord for the 370 Series - Dark Gray","description":"\u003cp\u003eA nicked, pulled or repeatedly taped mains lead sends plenty of good vacuums to the kerb early, and it does not have to. Part 1954DG is the factory power supply cord for the SEBO 370 in dark gray, supplied as a complete lead rather than a splice or a repair kit.\u003c\/p\u003e\u003cp\u003eCords fail where they are stressed. The strain relief where the lead enters the machine is one place, the plug end is another, and anywhere the cable has been run over by the nozzle or dragged out of a socket by the flex is a third. The outer sheath splits, the copper inside work-hardens and breaks strand by strand, and the machine begins cutting out whenever the lead is moved. Exposed conductors are a shock and a fire risk, which puts a damaged cord firmly in the replace-now category rather than the keep-an-eye-on-it one.\u003c\/p\u003e\u003cp\u003eDark gray is the finish listed for the 370, and the lead is supplied whole rather than as a length to be cut and terminated, so nothing needs specifying beyond the model. It covers the 370 COMFORT and the ELECTRONIC 370 alike. A cord that has been taped mid-run is not repaired, only hidden, and taped joints are the ones that fail again first in a machine dragged around a house every week.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT and ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003eColour: dark gray\u003c\/li\u003e\n\u003cli\u003eSupplied as: one complete replacement cord\u003c\/li\u003e\n\u003cli\u003eReplace when: the sheath is cut or taped, the machine cuts out as the lead is flexed, or the plug end is damaged\u003c\/li\u003e\n\u003cli\u003ePart number: 1954DG\u003c\/li\u003e\n\u003cli\u003eOrder alongside: 20115 wire tie for the 370 COMFORT, since the original is usually cut during the job\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMains wiring should be handled by someone competent to do it, and any vacuum service shop will fit one quickly. Searches for a SEBO 370 power cord, an ELECTRONIC 370 mains lead or a 370 COMFORT cord replacement all point at this part. Genuine SEBO cord, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214486003962,"sku":"1954DG","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/687f43839c2bc062c17024c98ba39150.jpg?v=1786669828"},{"product_id":"power-supply-cord-for-300-and-350","title":"SEBO Power Cord with US Plug for 300 and 350 Mechanical Uprights - 13 m","description":"\u003cp\u003eCord damage is the most common reason a commercial upright gets pulled out of service, and 501843 is the factory lead that puts it back to work. SEBO lists it at position 11 of the 300 350 Mechanical parts diagram as the gray black cable with a US plug, 13 m long, which is the 40 foot working reach these machines are sold with.\u003c\/p\u003e\n\u003cp\u003eFits the SEBO 300 Mechanical and 350 Mechanical. Retire any cord with nicks through the outer jacket, a cut that exposes the inner insulation, a plug body that has been crushed in a doorway, or a splice patched up with tape. None of those are cosmetic faults, and a taped repair will not pass an equipment inspection in a building that runs them. A new lead also restores the full run length, so the machine can cover a room from a single outlet again instead of being unplugged and moved twice.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 501843\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 11, cable with US plug, gray black, 13 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 300 Mechanical and SEBO 350 Mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 13 m, quoted by SEBO in the parts list\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e unplug and take the machine out of service before replacing a damaged cord\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e gray black cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe parts the cord works with on these uprights are cable hook 50220HGER, supplied with its screw, washer and spring, switch 05112ER, switch rod 50371ER and switching unit 50443UL. Anti-static wire 50142ER is the other conductor inside the body, and suppressor kit 1013ER covers the motor side. If the cord is being replaced as part of a wider refurbishment, handle tube with cover 50145SE and complete handle 50214HGER are the assemblies it runs through.\u003c\/p\u003e\n\u003cp\u003eGenuine SEBO part from an authorized dealer. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214486331642,"sku":"501843","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/501843_65071c79-167b-406c-96b0-9e35d2ad5b2e.jpg?v=1785156642"},{"product_id":"anti-static-wire-for-300-and-350","title":"SEBO Anti-Static Wire for 300 and 350 Mechanical Uprights","description":"\u003cp\u003eStatic build-up comes with the territory when dry air and carpet fiber are pulled through a plastic housing all day, and part 50142ER is the small conductor that carries that charge safely away on the SEBO 300 Mechanical and 350 Mechanical. It ties the machine's internal path to ground so the charge bleeds off continuously instead of collecting until it jumps to whoever is holding the handle.\u003c\/p\u003e\n\u003cp\u003eNothing about a failed anti-static wire shows up as a performance fault, which is why it usually gets diagnosed from complaints rather than inspection. Operators start reporting nips at the grip, dust begins clinging stubbornly to the outside of the body instead of being drawn in, and cleaned carpet picks up lint again faster than it should. Any service that reveals a broken conductor, a wire pulled out of its terminal, or a green, corroded end is the same conclusion. Unplug the vacuum before opening the housing, make sure both ends are clean and firmly seated when the new wire goes in, and confirm the routing keeps it clear of the brush roller and the belt path.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 50142ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 300 Mechanical and SEBO 350 Mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e carries static charge from the machine to ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptoms of failure:\u003c\/strong\u003e shocks at the grip, dust clinging to the body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore fitting:\u003c\/strong\u003e unplug the machine and check both terminals for corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther electrical parts on the same two uprights are power supply cord 501843, switch 05112ER, switch rod 50371ER, switching unit 50443UL, sensor 50445ER and suppressor kit 1013ER for the motor. Where a static complaint is really a filtration complaint, the pre-motor filter behind safety catch 50205ER is stocked as 5036AM, 5425AM or HEPA 5812ER, with bags as 5093AM.\u003c\/p\u003e\n\u003cp\u003eGenuine SEBO stock from an authorized dealer. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214486724858,"sku":"50142ER","price":6.99,"currency_code":"USD","in_stock":true}]},{"product_id":"internal-cable-through-bag-housing-for-370-series","title":"SEBO Internal Cable Through Bag Housing for 370 Comfort and Electronic 370","description":"\u003cp\u003ePower that flickers on and off as the handle is moved usually ends at a lead like this one. Part 1833UL is the internal cable routed through the bag housing of the SEBO 370 Comfort and Electronic 370.\u003c\/p\u003e\u003cp\u003eFlexing at the same two points for years fatigues the strands inside the insulation, and the break can be completely invisible from outside the sheath. That is what makes this fault so misleading: the cable looks perfect, the fault comes and goes with the machine's posture, and the components at either end get suspected first. Once a continuity test with the lead gently flexed puts the fault in this section, renewing the run is a permanent fix rather than a temporary one. Intermittent power, a machine that cuts out when reclined, and a dead circuit downstream of the housing all point the same way.\u003c\/p\u003e\u003cp\u003eAny work here is mains wiring, so treat it accordingly and hand it to a technician if that is not familiar ground.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e internal power lead routed through the bag compartment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAddresses:\u003c\/strong\u003e intermittent power and dead circuits downstream\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1833UL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e female contact holder 1836UL, cable connection cover 1812HG, and bag housing 1831HG, which is supplied with its internal cable already fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe diagnosis is worth doing properly rather than by substitution. With the machine unplugged, put a meter across the run and flex the lead by hand along its length; a reading that jumps as the cable moves confirms the break is inside this section and not at a connector. Searches for a SEBO 370 internal wire or an Electronic 370 housing cable land on 1833UL.\u003c\/p\u003e\u003cp\u003eGenuine SEBO through an authorized dealership, usually shipping in 2–5 business days. Unplug the machine before starting, copy the original routing exactly so the new lead clears the moving parts, and check the terminals at both ends for heat marks while they are accessible. A lead that has been arcing at a loose contact will have marked the contact as well as itself.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214487445754,"sku":"1833UL","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/71a294bd123314e35d56d3f8dfb8d957.jpg?v=1786669787"},{"product_id":"wire-swivel-neck-for-370-electronic","title":"SEBO Swivel Neck Wire for the ELECTRONIC 370","description":"\u003cp\u003eIntermittent power at the floor head is the classic reason this lead gets ordered. Part 2611UL is the factory wire that runs through the steering neck of the SEBO ELECTRONIC 370, carrying the supply across the joint where the body pivots over the cleaning head.\u003c\/p\u003e\u003cp\u003eEvery recline and every turn works this conductor, and after enough cycles a strand breaks inside the insulation or a terminal backs off its spade. The give-away symptom is power that comes and goes with handle position rather than a machine that is dead outright: the head cuts out as the body is laid back, or comes on again when the handle is nudged. That behaviour is easy to blame on the board, which is exactly why the neck is the first place to look.\u003c\/p\u003e\u003cp\u003eBeing a made-up lead, the SEBO replacement arrives with the correct length and terminations, so there is no splicing to do. Unplug the machine, note the original cable path and every clip or grommet before the old wire comes out, then route the new one the same way, since a lead pinched at the pivot will fail again quickly. If the joint itself feels loose, the swivel neck assembly is 2609UL and the brace behind it is 2613; if the wiring proves sound, the electronic controller is 2572ER.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2611UL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e carries the supply across the pivoting neck joint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e head power that changes with handle position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting note:\u003c\/strong\u003e unplug the machine and copy the original cable path exactly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 2609UL swivel neck assembly, 2613 swivel support, 2572ER PCB electronic controller\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO lead from an authorized dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214487511290,"sku":"2611UL","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3c332750a33859a33caa9d75ed328c8b.jpg?v=1786669994"},{"product_id":"female-contact-holder-for-370-series","title":"SEBO Female Contact Holder for 370 Comfort and Electronic 370","description":"\u003cp\u003eMoulded insulation with pockets sized so the female terminals inside a SEBO 370 Comfort or Electronic 370 sit square and stay apart. Part 1836UL is that holder.\u003c\/p\u003e\u003cp\u003eScorch marks around a terminal, or a connector that feels slack when it is pushed home, mean the holder has lost its grip. Contacts that can move begin to arc, arcing burns and pits the metal, and pitted contacts run hotter still — the failure feeds itself, and the longer it continues the more of the surrounding assembly it takes with it. A fresh holder re-establishes the spacing and the retention the connection was designed around, which is the only way to break that cycle properly.\u003c\/p\u003e\u003cp\u003eIt is a small insulating part with a safety function, so it is not a component to improvise around with tape or adhesive.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e insulating holder for the female contacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps:\u003c\/strong\u003e terminals aligned, spaced and retained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1836UL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e internal cable 1833UL and cable connection cover 1812HG for the same machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA burnt or acrid smell around the connection area is the symptom that should stop everything until the joint has been looked at, and a holder that has discoloured with heat should not go back in whatever its condition otherwise. Anyone searching for a SEBO 370 terminal holder, a contact block or an Electronic 370 connector insulator is looking at part 1836UL.\u003c\/p\u003e\u003cp\u003eGenuine SEBO through our authorized dealership, usually moving in 2–5 business days. Disconnect the machine from the mains first, then examine the terminals for pitting and discolouration while they are out — a holder that failed because of arcing has almost certainly left its mark on the contacts, and renewing the insulation while leaving burnt metal in place solves only half the problem. Seat each terminal fully until it latches in its pocket.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214488854778,"sku":"1836UL","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5c388911cbdbdb218c6350da434d4758.jpg?v=1786669793"},{"product_id":"bag-holder-complete-for-g4-g5-and-370-series-includes-safety-catch-and-spring","title":"SEBO Complete Bag Holder for Essential G4, G5, 370 Comfort and Electronic 370","description":"\u003cp\u003eSafety catch and spring come in the box with this one. Part 1847 is the complete bag holder assembly for the SEBO Essential G4, Essential G5, 370 Comfort and Electronic 370.\u003c\/p\u003e\u003cp\u003eThe holder is what the filter bag collar clips into, so its condition decides whether the bag seats square against the intake neck. Warped or cracked, it lets the collar stand proud, and dust then takes the easy route around the bag rather than through the filtration — which is how fine grey dust ends up coating the inside of a compartment that should stay clean. Once that starts, it also finds its way onto the motor filter, and a repair that was about one small plastic part becomes a full strip and clean.\u003c\/p\u003e\u003cp\u003eBuying the assembly avoids sourcing the catch and its spring separately, and means the whole bag mount goes back to a known condition in one operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e complete bag holder assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e safety catch and spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO Essential G4, Essential G5, 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1847\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e the safety catch is also sold on its own as 1817, and bag housing locking rod 1811 covers the 370 machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eComplete means what it says here: the holder arrives with its safety catch and spring, so there is nothing to salvage from the old assembly and nothing else to order to finish the job. That makes it the straightforward choice when the existing holder is cracked, warped or has already lost its catch somewhere along the way.\u003c\/p\u003e\u003cp\u003eGenuine SEBO through an authorized dealership, generally shipping in 2–5 business days. Seat the bag collar fully square on the new holder before closing the door, and wipe the compartment out while it is empty so any dust that bypassed the old bag does not simply get drawn through the machine afterwards. If the door itself has been closing unevenly, look at the latch parts too — a sound holder cannot seal against a door that will not clamp.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214490558714,"sku":"1847","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1847_27030517-d702-4be5-86ca-0300ec498b08.jpg?v=1785148668"},{"product_id":"bag-holder-for-300-and-350","title":"SEBO Bag Holder for 300 and 350 MECHANICAL","description":"\u003cp\u003eBag holders exist to keep the collar square to the inlet, and part 50125ER is the one used in the SEBO 300 MECHANICAL and 350 MECHANICAL. It is the frame the bag hangs from inside the compartment, and it does the whole job of turning a paper bag into a sealed part of the air path.\u003c\/p\u003e\n\u003cp\u003eIf the frame is warped or cracked, the bag hangs at an angle and its collar stops pressing flat against the inlet. Dust then takes the gap instead of the bag, coating the pre-motor filter on its way through and eventually reaching the motor. A bag that seems to fill unevenly, a compartment with loose debris in the bottom of it, or a machine that smells dusty in use all trace back to this part more often than to the bags themselves. It is a cheap piece to rule out before anyone starts pricing motors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSEBO part number:\u003c\/strong\u003e 50125ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 300 MECHANICAL and SEBO 350 MECHANICAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e locates and holds the dust bag collar against the inlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck:\u003c\/strong\u003e the collar should click home and sit flat, with no play in the frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSits inside:\u003c\/strong\u003e bag housing 50100SE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe release mechanism that works against it is bag lever 50122OR with axle 50123ER and return spring 50124ER. Downstream, filter safety catch 50205ER holds the pre-motor filter, which is stocked as microfilter 5036AM, anti-odor microfilter 5425AM or HEPA microfilter 5812ER, and filter indicator 50209ER is the gauge that tells you when the bag is done. Genuine bags come as 5093AM, or by the carton in 5093A3 and 5093A4, and the exhaust inserts on the other side of the motor are 50169ER and 50170ER.\u003c\/p\u003e\n\u003cp\u003eGenuine SEBO bag holder, supplied by an authorized dealer. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214490984698,"sku":"50125ER","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/cf2a1b9d7e7a853906ec6f2ca6e7256a.jpg?v=1786669401"},{"product_id":"dust-bag-housing-w-internal-cable-for-370-series-light-gray","title":"SEBO Dust Bag Housing with Internal Cable for 370 Comfort and Electronic 370 — Light Gray","description":"\u003cp\u003eReplacing a latch, a clip or a door seal only goes so far. Part 1831HG is the complete light gray dust bag housing for the SEBO 370 Comfort and Electronic 370, and it arrives with the internal cable already routed through the moulding.\u003c\/p\u003e\u003cp\u003eHousings get changed after a fall cracks the shell, after a bag has been forced against a broken door, or when the compartment simply will not seal again no matter how many small parts have been renewed. That last case is the common one and the most frustrating, because a housing that has been distorted holds the door out of true everywhere at once, and each individual component tests fine on its own. Having the cable supplied pre-fitted takes the fiddly threading work out of the repair and removes the main opportunity to get the routing wrong.\u003c\/p\u003e\u003cp\u003eLight gray matches the external mouldings across the 370 range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e complete dust bag housing with the internal cable fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1831HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e bag housing bumper 1804HG, bag holder 1847, safety catch 1817, locking rod 1811 and attachment clip 1823HG, all listed for the same machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBefore committing to a full housing, it is worth ruling out the smaller failures one at a time: the door latch parts, the bag holder and the catch that retains it. A housing is the right answer when the shell itself is cracked or distorted, and the giveaway is a door that will not sit evenly no matter which individual component is renewed.\u003c\/p\u003e\u003cp\u003eGenuine SEBO, generally shipping in 2–5 business days. Transfer the bag holder and catches from the old shell unless those are being replaced too, and use the swap as the moment to renew anything that has been marginal — the bumper and the door latch parts are far easier to fit with the housing off the machine than on it. Unplug the vacuum before disturbing the cable, and photograph the assembly before it comes apart.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214491476218,"sku":"1831HG","price":76.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/b98c07fc9045060646275e045bc92a1e.jpg?v=1786669785"},{"product_id":"dust-bag-housing-complete-for-300-and-350-gray-black","title":"SEBO Complete Dust Bag Housing for 300 and 350 MECHANICAL - Gray Black","description":"\u003cp\u003eCatalogued as item 1 on SEBO's 300\/350 Mechanical parts diagram, 50100SE is the entire dust bag compartment for the SEBO 300 MECHANICAL and 350 MECHANICAL, supplied complete in gray black. It is the largest single molding on the front of these commercial uprights and the one that everything else in the bag system mounts into.\u003c\/p\u003e\n\u003cp\u003eThis housing has to seal around the bag collar, and that seal is the only thing standing between the debris you pick up and the motor behind it. A cracked shell or a broken latch breaks it, and the symptoms arrive quickly: weak pickup, dust settling on the pre-motor filter far sooner than it should, and grit in places it has no business being. Commercial machines earn those cracks the hard way, dropped down stairwells and wheeled into door frames shift after shift. Buying the assembly complete avoids chasing individual clips and hinges around a shell that has already failed once.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSEBO part number:\u003c\/strong\u003e 50100SE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParts diagram:\u003c\/strong\u003e SEBO 300\/350 Mechanical, position 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 300 MECHANICAL and SEBO 350 MECHANICAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e complete assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed:\u003c\/strong\u003e bag housing 50200GS for the same two machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe smaller pieces that live in and around this housing are all available separately, which is worth knowing before committing to the whole assembly: bag holder 50125ER, bag lever 50122OR with axle 50123ER and return spring 50124ER, mounting fitting 50131HG and bumper base 50118HG along the lower edge. Filter bags for these uprights are boxed as 5093AM, with 5093A3 and 5093A4 as the multi-box cartons, and the pre-motor filter behind safety catch 50205ER is stocked as 5036AM, 5425AM or HEPA microfilter 5812ER.\u003c\/p\u003e\n\u003cp\u003eGenuine SEBO stock, sold through an authorized dealership. Fit a genuine SEBO bag afterwards and make sure its collar clicks all the way into place. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214492033274,"sku":"50100SE","price":137.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/f17809fa2e8e46254937a16f296401c7.jpg?v=1786669383"},{"product_id":"dust-bag-housing-for-300-and-350-gray-black","title":"SEBO Dust Bag Housing for 300 and 350 Mechanical Uprights - Gray Black","description":"\u003cp\u003eEverything the machine picks up passes through the bag chamber before it reaches a filter, which is why the condition of that chamber matters more than it looks like it should. Part 50200GS is the gray black bag housing for the SEBO 300 Mechanical and the SEBO 350 Mechanical, drawn at position 7 in the SEBO 300 350 Mechanical parts diagram.\u003c\/p\u003e\u003cp\u003eThe housing squares the bag up and clamps its collar into the airstream. A split shell, a distorted sealing lip or a catch that no longer pulls tight lets air short-circuit around the bag, and the fine dust riding in that air goes straight onto the motor filter. Weak pull with a brand new bag fitted, or a film of dust inside the cabinet, both point back to this part. Cracks usually start around the mounting bosses and travel outward from there, so run a thumb over those faces every time the chamber is open.\u003c\/p\u003e\u003cp\u003eNothing else in the bag compartment behaves properly around a distorted housing, so the small hardware in the same space is worth checking while the machine is apart: bag holder 50125ER, orange bag lever 50122OR, return spring 50124ER, and 50118HG, the bumper base the housing sits against. Fresh bags seat far more predictably in a housing that has kept its shape, and the eight-bag box for these uprights is 5093AM.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 50200GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 300 Mechanical and SEBO 350 Mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 7, SEBO 300 350 Mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e holds the filter bag square and seals its collar into the airstream\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the shell is cracked, the sealing lip is distorted, or dust is settling inside the cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 50125ER bag holder, 50122OR bag lever, 50124ER return spring, 50118HG bumper base, 5093AM filter bags\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting note:\u003c\/strong\u003e seat the bag collar fully before closing the chamber\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAnyone hunting a SEBO dust bag housing, a 300 Mechanical bag compartment, or a 350 Mechanical bag housing replacement is on the correct part number here. Genuine SEBO stock supplied by an authorized dealer, and it ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214492066042,"sku":"50200GS","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0688a4b3afdf2d5f1283c3daaece6d8a.jpg?v=1786669426"},{"product_id":"dust-bag-housing-bumper-base-for-300-and-350-light-gray","title":"SEBO Bag Housing Bumper Base for 300 and 350 MECHANICAL - Light Gray","description":"\u003cp\u003eAlong the bottom edge of the bag compartment sits a bumper base, and on the SEBO 300 MECHANICAL and 350 MECHANICAL that piece is part 50118HG in light gray. It runs the width of the housing at the height where the machine meets everything it is pushed into.\u003c\/p\u003e\n\u003cp\u003eThis is the first thing on the vacuum to meet kick boards, stair risers, table legs and desk pedestals, so it wears through, splits at the corners, or disappears altogether on a machine that has done a few years of contract work. Once it has gone, every future knock lands on the bag compartment itself, and that is a far more expensive part to put right. The bumper base is designed to be the thing that gives way, which makes replacing it a cheap piece of preventive work rather than a repair. Fitting one also removes the split, snagging edge that catches on baseboards and marks paintwork.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSEBO part number:\u003c\/strong\u003e 50118HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 300 MECHANICAL and SEBO 350 MECHANICAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e takes the knocks that would otherwise land on the bag compartment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder one when:\u003c\/strong\u003e the strip is cracked, worn through, or missing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe compartment it protects is bag housing 50100SE, listed complete in gray black, and the fitting that locates that housing on the chassis is 50131HG. Inside it sit bag holder 50125ER and bag lever 50122OR with its axle 50123ER and return spring 50124ER. Elsewhere on the same two uprights, brush strip cover 50352HG and carrying handle 50143GSER are the other parts that take physical damage first, and filter bags are ordered as 5093AM.\u003c\/p\u003e\n\u003cp\u003eGenuine SEBO part from an authorized dealer. Look over the exposed lower edge of the housing for cracks before the new bumper goes on. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214492688634,"sku":"50118HG","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1b6447b0bc360ead385da323925e9ee1.jpg?v=1786669389"},{"product_id":"dust-bag-housing-bumper-for-370-series-light-gray","title":"SEBO Dust Bag Housing Bumper for 370 Comfort and Electronic 370 — Light Gray","description":"\u003cp\u003eDoorframes, baseboards and chair legs take their toll, and on the 370 uprights it is the trim strip down the side of the bag compartment that absorbs all of it. Part 1804HG is the light gray bumper that replaces it once the original has gone hard, torn away from its channel or disappeared altogether.\u003c\/p\u003e\u003cp\u003eBeyond the cosmetics, the bumper is what stands between the housing shell and every hard surface the machine meets. Once it stops covering the leading edge, the plastic behind it scuffs, then chips, and that damage cannot be undone — a housing is a far more expensive thing to put right than the strip protecting it. Bumpers also tend to lift at one end first, and a lifted end catches on carpet gripper and skirting, which peels the rest away within a few weeks.\u003c\/p\u003e\u003cp\u003eThis is the light gray finish used across the 370 range's external mouldings, so it sits in with the rest of the machine rather than announcing itself.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects:\u003c\/strong\u003e the dust bag housing from impact and abrasion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in:\u003c\/strong\u003e the original bumper channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1804HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e complete dust bag housing 1831HG and front cover 1846HG for the same models\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitting one is a short job that keeps a working machine looking cared for, which matters more than it sounds on a vacuum used in front of customers or tenants. The bumper is designed to be consumed rather than preserved, so a hard, split or missing strip is a service item rather than a fault, and renewing it early is the simplest protection the housing will ever get.\u003c\/p\u003e\u003cp\u003eGenuine SEBO stock through our authorized dealership, usually moving in 2–5 business days. Clean old adhesive residue and packed grit out of the channel first so the new bumper seats fully along its whole length, and start it at one end rather than pushing it in from the middle. Anyone hunting a SEBO 370 bumper strip or a 370 Comfort bag housing trim is looking at the correct part.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214493245690,"sku":"1804HG","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/b346362c18abf18cd3aebb5b7affb9ec.jpg?v=1786669746"},{"product_id":"cable-hook-for-370-series-light-gray","title":"SEBO Cord Storage Cable Hook for 370 Comfort and Electronic 370 — Light Gray","description":"\u003cp\u003eCord that refuses to stay wrapped is nearly always a hook fault rather than a cord fault. Part 1813HG is the light gray cable hook that the SEBO 370 Comfort and Electronic 370 wind their mains lead around for storage.\u003c\/p\u003e\u003cp\u003eYears of yanking the lead free in a hurry crack the moulding at its root or snap a tip away entirely, and what is left cannot hold a coil. The cord then trails behind the machine between rooms, where it collects the crush damage and door-edge nicks that shorten its life far more effectively than any amount of vacuuming does. A hook with a broken tip is also worth catching early because the coil slips off progressively rather than all at once, and most owners simply adjust how they wrap the cord until the day it stops working entirely.\u003c\/p\u003e\u003cp\u003eThe replacement mounts on the original fixing point, so the repair is a short one and needs no modification to the machine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e cord storage hook for the mains lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores:\u003c\/strong\u003e a solid anchor for the coiled cord\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1813HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e cable connection cover 1812HG and handle tube 1848 for the same machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA hook that is cracked at the root rather than snapped off is the one to catch early, since it will still hold a loose coil and gives no obvious warning until the day it lets the whole lead go. Searches for a SEBO 370 cord hook, a 370 Comfort cable hook or an Electronic 370 cord winder all land on part 1813HG.\u003c\/p\u003e\u003cp\u003eGenuine SEBO from an authorized dealer, usually shipping in 2–5 business days. Unhook the cord by rotating it off the tip rather than dragging it straight down and the new hook will last considerably longer. While the old one is off, run the lead through your fingers along its length and check for flat spots or nicks left by the period it spent trailing on the floor.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214494523642,"sku":"1813HG","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/4d74aa93501688f527dddf5f0d7f745a.jpg?v=1786669757"}],"url":"https:\/\/evacuumsandmore.com\/collections\/sebo-300-series.oembed?page=8","provider":"Vacuums and More","version":"1.0","type":"link"}