{"title":"Sebo 370","description":null,"products":[{"product_id":"axle-for-370-electronic","title":"SEBO Axle for the ELECTRONIC 370","description":"\u003cp\u003eOrdering the right axle for a 370 matters, because SEBO lists two of them. Part 2525 is the plain axle covered by this listing, while the pile adjustment shaft carries its own number, 2524. Both are used on the SEBO ELECTRONIC 370, and neither substitutes for the other.\u003c\/p\u003e\u003cp\u003eAn axle takes constant rotational load plus the occasional shock every time the machine is dragged over a threshold or bumped down a step. Wear concentrates where the shaft runs in its bearing faces, and it shows up as a wobble, a knock over hard floors, or components that no longer sit square on the shaft and start to run untrue. Once that happens the wear stops being confined to the axle: whatever it carries begins to wear at an angle, and a small part turns into a more involved repair.\u003c\/p\u003e\u003cp\u003eA straight, unworn axle puts the geometry back and stops that spreading. Check the shaft for scoring and for play at the ends before deciding, and if the fault lies with the height setting rather than the running gear, the part wanted is 2524 instead. Other 370 items worth inspecting while the machine is apart are the brush roller pulley 2458, the inner roller bearing 2467, the bumper 2522HG and the brush strip cover 2542.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2525, sold individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistinct from:\u003c\/strong\u003e the pile adjustment axle, part 2524\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e there is play, a knock over hard floors, or visible wear along the shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom it cures:\u003c\/strong\u003e components running untrue on a worn shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder note:\u003c\/strong\u003e quote 2525 so the plain axle is picked rather than the adjustment shaft\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO component supplied by an authorized dealer; ships in 2-5 business days. Searches for a SEBO 370 axle or an ELECTRONIC 370 shaft replacement both describe this number.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472274170,"sku":"2525","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1eebec18becacc80d67d70f369e1504a.jpg?v=1786669974"},{"product_id":"axle-assembly-for-370-electronic-light-gray","title":"SEBO Axle Assembly for the ELECTRONIC 370 — Light Gray","description":"\u003cp\u003eShaft, wheel and mounting hardware arrive together in part 2630HG, the light gray axle assembly for the SEBO ELECTRONIC 370. Buying it made up renews the running gear in one operation instead of piecemeal.\u003c\/p\u003e\u003cp\u003eThis axle carries the weight of the machine on every stroke and takes a shock load each time the vacuum is bumped over a threshold or dropped the last inch onto a hard floor. A shaft that has bent, or a bore that has worn oval, turns into wobble and uneven rolling, and the extra load is then thrown at the plastics around it. The machine feels heavy, tracks badly, and can leave the nozzle sitting at the wrong height on one side.\u003c\/p\u003e\u003cp\u003eReplacing the whole unit removes any argument about which half had actually gone, which is the usual difficulty once a shaft and a bore have worn into each other. Note how the old assembly is oriented as it comes out, clear packed hair from around the shaft, and check the remaining wheels for wear while the machine is turned over.\u003c\/p\u003e\u003cp\u003eIndividual light gray wheels for this model are listed under 2614HG if only one wheel has failed and the shaft is sound. Anyone searching for a SEBO 370 axle or an ELECTRONIC 370 wheel and axle replacement is looking at this number.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2630HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e complete assembly with shaft, wheel and mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e wobble, uneven rolling or a machine that has become hard to push\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 2614HG complete wheel, 2543HG complete chassis\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO component from an authorized dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472536314,"sku":"2630HG","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/030fae07dd9a6d84645ea7023db5d302.jpg?v=1786670013"},{"product_id":"pile-adjustment-axle-for-370-electronic","title":"SEBO Pile Adjustment Axle for the ELECTRONIC 370","description":"\u003cp\u003eHeight settings that drift back on their own, or a pile adjustment that turns without changing anything, usually mean the axle it acts through has worn or broken. Part 2524 is that axle on the SEBO ELECTRONIC 370.\u003c\/p\u003e\u003cp\u003ePile adjustment raises and lowers the cleaning head so the brush sits correctly in the carpet. Too high and the roller skates over the surface, leaving the grit down in the pile; too low and it drags, loading the motor and wearing the bristle strip flat in a fraction of its normal life. This axle is the shaft that carries the adjustment motion across to the head, so everything the control does has to pass through it. When it wears at the bearing faces or shears outright, the link between control and head is lost, and the setting either slips under load or stops responding at all.\u003c\/p\u003e\u003cp\u003eRenewing the axle gives back a positive, repeatable height setting, and the difference is obvious on the first pass over cut pile. Take care with the number: SEBO lists two axles for this machine, and the plain one is 2525. They are not interchangeable, so quote 2524 for the pile adjustment shaft. If the strip itself has worn flat rather than the setting drifting, the height control is not the fault to chase.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2524\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart supplied:\u003c\/strong\u003e pile adjustment axle, sold singly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCures:\u003c\/strong\u003e a height control that slips, drifts, or feels disconnected from the head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot to be confused with:\u003c\/strong\u003e the separate axle listed as 2525\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated 370 spares:\u003c\/strong\u003e brush strip cover 2542, brush roller pulley 2458, inner roller bearing 2467\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO spare from an authorized dealer; ships in 2-5 business days. A search for a SEBO 370 pile height adjuster shaft or an ELECTRONIC 370 pile adjustment axle lands on this part.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472831226,"sku":"2524","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/f24581052d975e814cc4239a61c40ee0.jpg?v=1786669971"},{"product_id":"bearing-block-r-h-for-370-comfort","title":"SEBO Right-Hand Bearing Block for the 370 COMFORT","description":"\u003cp\u003eA grinding or rumbling note from the right-hand end of the brush roll usually means the bearing block on that side has reached the end of its life. Part 20117ER is the right-hand bearing block for the SEBO 370 COMFORT, the seat the roll turns in.\u003c\/p\u003e\u003cp\u003eThe block is working whenever the roller is, and it sits exactly where hair and fine grit collect once they have worked past the end of the shaft. Worn, it drags on the roll, adds load to the motor and the belt, and lets the roller wobble instead of sweeping evenly across the full width of the nozzle. Left long enough it takes the belt and the roller with it. A new block puts the roll back on a true, quiet seat and takes the extra load off everything driving it.\u003c\/p\u003e\u003cp\u003eThis is the right-hand block specifically, so establish which end the noise is coming from before ordering, or cover both ends if the roller has been in service a long time. It is listed for the 370 COMFORT. Bearing failure is progressive rather than sudden: the roller becomes slightly stiffer to spin by hand, then noisy, then loose, and each stage loads the belt driving it a little more. Catching it at the stiff stage usually saves the belt as well.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT\u003c\/li\u003e\n\u003cli\u003ePosition: right-hand end of the brush roll\u003c\/li\u003e\n\u003cli\u003eReplace when: the roller is noisy, stiff to turn by hand, or has play at the end\u003c\/li\u003e\n\u003cli\u003ePart number: 20117ER\u003c\/li\u003e\n\u003cli\u003eRelated: 20123ER left-hand bearing block cover, 20120ER brush roller release button, 20121 release spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBearings age at much the same rate at both ends, so check the opposite side while the roller is out and clear the wound thread off the shaft before it goes back in. Anyone searching for a SEBO 370 brush roll bearing, a 370 COMFORT bearing block or a noisy brush roller repair part is looking at the right number. Genuine SEBO component, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473421050,"sku":"20117ER","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/20117ER.jpg?v=1785149120"},{"product_id":"rear-bottom-plate-with-screws-for-370-comfort-light-gray","title":"SEBO Rear Bottom Plate with Screws for the 370 COMFORT - Light Gray","description":"\u003cp\u003eScrews come in the box with this one. Part 20107ER is the rear bottom plate for the SEBO 370 COMFORT, finished in light gray and supplied with the fixings that hold it, so the panel and its screws are renewed together rather than a new plate going back onto tired threads.\u003c\/p\u003e\u003cp\u003eThe plate caps the rear section beneath the cleaning head and keeps that trailing edge sitting flat to the floor. Cracked at a screw hole, or warped after years of heat and abrasion, it lets the back of the housing lift and rock as the machine is pushed. The path behind the brush loses its seal and pickup on the back half of every pass drops away, a fault that gets blamed on the motor or the bag far more often than on a bent panel. A new plate and new screws pull the base down tight again.\u003c\/p\u003e\u003cp\u003eLight gray and the COMFORT model are the two things to confirm. The plate is listed for the 370 COMFORT specifically, and the screws supplied with it are the correct ones, which saves the usual hunt through a jar of fasteners at the end of a job. Because it is a floor-contact part, wear happens gradually and is easy to miss until the head starts rocking; laying a straight edge across the leading edge is the quickest way to judge whether it has had enough.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT\u003c\/li\u003e\n\u003cli\u003eColour: light gray\u003c\/li\u003e\n\u003cli\u003eIncludes: mounting screws\u003c\/li\u003e\n\u003cli\u003eReplace when: the plate is cracked at a fixing point, warped, or the rear of the head rocks on the floor\u003c\/li\u003e\n\u003cli\u003ePart number: 20107ER\u003c\/li\u003e\n\u003cli\u003eRelated underside parts: 20118ER brush strip cover, 20117ER right-hand bearing block\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA screwdriver is all the job asks for. Check the data plate before ordering, since the 370 range shares a family resemblance across its variants and this panel is listed for the COMFORT. Genuine SEBO parts, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214475976954,"sku":"20107ER","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/20107ER.jpg?v=1708929303"},{"product_id":"bumper-for-370-comfort-light-gray","title":"SEBO Bumper for the 370 COMFORT - Light Gray","description":"\u003cp\u003eFurniture legs, skirting and door frames all meet the bumper before they meet anything else on the machine. Part 20109ER is that light gray trim for the SEBO 370 COMFORT, supplied as a genuine SEBO replacement.\u003c\/p\u003e\u003cp\u003eThe strip is meant to be the sacrificial piece and it does that job well until it hardens with age, splits, or loses the clips holding it in its channel. After that the upright's own housing collects the marks and passes them straight on to whatever it touches next. It is the sort of damage that accumulates unnoticed until someone finally looks at the skirting board in a hallway that gets vacuumed every day. A new bumper restores the buffer and smartens up the front of the machine at the same time.\u003c\/p\u003e\u003cp\u003eLight gray is the finish listed for the 370 COMFORT, and the shade is what separates this bumper from the equivalents used on other SEBO machines, so match it against the trim already on the vacuum. Fitting is a trim job with no tools of consequence involved. A bumper is also the part most often broken in storage or transit rather than in use, which makes a machine that has been moved between houses a likely candidate even when it is otherwise as new. Searches for a SEBO 370 bumper, a 370 COMFORT trim strip or a light gray bumper replacement all point here.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT\u003c\/li\u003e\n\u003cli\u003eColour: light gray\u003c\/li\u003e\n\u003cli\u003eReplace when: the trim is split, brittle, hanging loose or gone\u003c\/li\u003e\n\u003cli\u003ePart number: 20109ER\u003c\/li\u003e\n\u003cli\u003eRelated: 20107ER rear bottom plate with screws, also light gray, for the same machine\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe new trim takes the place of the worn one directly, with no adhesive involved. If you are unsure which 370 you own, check the data plate first, as this bumper is listed for the COMFORT. Searches for a SEBO 370 bumper, a 370 COMFORT trim strip or a light gray bumper replacement all point here. Genuine SEBO stock, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214477648122,"sku":"20109ER","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/20109ER.jpg?v=1709347851"},{"product_id":"bumper-for-370-electronic-light-gray","title":"SEBO Bumper for the ELECTRONIC 370 - Light Gray","description":"\u003cp\u003eBaseboards, chair legs and door frames take the punishment in daily cleaning, and the bumper is what stands between them and the machine body. Part 2522HG is the light gray bumper for the SEBO ELECTRONIC 370.\u003c\/p\u003e\u003cp\u003eThe bumper runs around the leading edge of the machine and absorbs contact so the housing does not. It is a consumable by design, which is why SEBO lists it on its own rather than only as part of a body assembly. Bumpers go hard with age, split at the corners where the contact loads concentrate, or work loose from their mounting until a length of it hangs off the edge of the housing. At that point it is doing neither job: furniture starts picking up marks, and the housing itself begins to scuff and chip where the bumper used to sit proud.\u003c\/p\u003e\u003cp\u003eFitting a fresh one puts a compliant edge back around the machine and tidies its appearance at the same time, which matters on a 370 that is otherwise sound. Get the color right when ordering, since light gray is a specific finish rather than a generic description. The other 370 wear items in the same family are the foot pedal 2528OR, the brush strip cover 2542, the pile adjustment axle 2524, the axle 2525, the brush roller pulley 2458 and the inner roller bearing 2467.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2522HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e absorbs contact with walls, furniture and door frames\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the strip is split, hardened, scuffed through or no longer seated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one bumper\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO part, authorized dealer stock, shipping in 2-5 business days. Searches for a SEBO 370 bumper or an ELECTRONIC 370 bumper strip replacement both describe this listing.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214477746426,"sku":"2522HG","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2522HG.jpg?v=1709347853"},{"product_id":"on-off-switch-button-for-370-series-gray-black","title":"SEBO On\/Off Switch Button for 370 Comfort and Electronic 370 — Gray Black","description":"\u003cp\u003ePresses that no longer give a clean click, or a button that stays sunk after being pushed, are what part 1830GS answers. It is the gray black on\/off cap used on the SEBO 370 Comfort and Electronic 370.\u003c\/p\u003e\u003cp\u003eThe cap absorbs every start and stop across the working life of the machine, and it fails in slow motion. Worn pivots let it sit crooked in its aperture so the press lands off-centre and the switch beneath it only sometimes trips. A split cap goes further and leaves that switch open to the dust it was moulded to keep out, which is how an intermittent fault turns into a permanent one. The distinction matters when diagnosing: a machine that starts on the second or third press has a problem at the cap far more often than an electrical fault below it.\u003c\/p\u003e\u003cp\u003eGray black is the finish for this control, and the replacement seats over the existing switch mechanism without any wiring work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e on\/off button cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats over:\u003c\/strong\u003e the existing switch mechanism\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1830GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e internal cable 1833UL and female contact holder 1836UL, the next things to test if the fault persists\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA cap that has gone missing entirely rather than cracked deserves the same treatment, since the switch beneath it is then exposed to dust every time the machine runs and the aperture edge is a poor thing to press with a fingertip. Searches for a SEBO 370 power button, a 370 Comfort on off switch cap or an Electronic 370 switch cover all describe 1830GS.\u003c\/p\u003e\u003cp\u003eGenuine SEBO through our authorized dealership, usually shipping in 2–5 business days. Clear the aperture of packed dust before fitting so the new cap can move freely in its bore, and press it home squarely. If the machine still fails to start reliably with a sound cap fitted, the switch body underneath is the next thing to test — unplug the vacuum before going any further.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214478106874,"sku":"1830GS","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/d3fc56ba85b21f964ed30ee80061e92e.jpg?v=1786669780"},{"product_id":"front-cover-release-for-370-series-dark-gray","title":"SEBO Front Cover Release Latch for 370 Comfort and Electronic 370 — Dark Gray","description":"\u003cp\u003ePress it, and the front cover should let go first time, every time. Part 1818GS is the dark gray release that does that job on the SEBO 370 Comfort and Electronic 370.\u003c\/p\u003e\u003cp\u003eOnce the sprung arm inside the moulding snaps, the fault goes one of two ways. Either the panel will not open at all, so bag changes turn into a wrestling match and the cover usually ends up damaged by the effort, or it will not stay shut and rattles free while the machine works. Both symptoms trace back to this one small component, and both get worse quickly because each failed attempt puts more load on what is left of the arm. The tell is the sound: a healthy release gives a definite click, and a broken one goes quiet before it goes altogether.\u003c\/p\u003e\u003cp\u003eDark gray is the finish used for this part, so it does not match the light gray body mouldings elsewhere on the machine — that contrast is original, not a sign of a previous repair.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e front cover release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnswers:\u003c\/strong\u003e a cover that sticks shut, or one that will not stay closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1818GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e its mounting seat is sold separately as holder 1819, and the complete front cover is 1846HG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTelling this apart from a failed seat is straightforward. Press the release and watch the moulding immediately around it: if the lever moves and the surround stays still, the release itself is at fault and 1818GS is the part; if the whole area flexes, the holder behind it has split and part 1819 belongs on the same order.\u003c\/p\u003e\u003cp\u003eGenuine SEBO, generally shipping in 2–5 business days. A broken release often takes its seat with it, so inspect the holder for splits before reassembly and order both if there is any doubt — the two together still make for a quick job, whereas discovering the second failure afterwards means stripping the front of the machine twice.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214478860538,"sku":"1818GS","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/9c93416fb7aca1471b6c4c76547baf63.jpg?v=1786669764"},{"product_id":"pile-adjustment-knob-for-370-electronic-light-gray","title":"SEBO Pile Height Adjustment Knob for the ELECTRONIC 370 — Light Gray","description":"\u003cp\u003eBrush height on the SEBO ELECTRONIC 370 is dialled in with this light gray knob, part 2622HG. Turning it moves the roller nearer to or further from the carpet so the bristles work the pile instead of stalling in it.\u003c\/p\u003e\u003cp\u003eKnobs of this kind fail in two ways. The splines round off, so the knob turns freely without moving anything behind it, or the detents wear flat and the setting creeps a notch at a time while you clean. Either fault leaves the brush at the wrong depth. Too high and the machine skates over deep carpet picking up very little; too low and it bogs down, drags on the belt and makes hard work of an open room.\u003c\/p\u003e\u003cp\u003eBecause the knob is the part your hand touches on every carpet change, it is also the part that gets levered, dropped on and eventually snapped. A fresh one puts positive, repeatable height selection back under your thumb, and it is a quick change with the machine unplugged and laid over.\u003c\/p\u003e\u003cp\u003eThe wheel the knob acts through is a separate item, 2608HG, and is worth checking at the same time: if a new knob turns cleanly but the setting still will not hold, that wheel is the next suspect. Anyone searching for a SEBO 370 pile height knob or a carpet height adjuster knob for an ELECTRONIC 370 is looking at this number.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2622HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e knob only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e sets brushroll depth to suit the carpet being cleaned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e a knob that spins without effect, or a setting that will not stay selected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 2608HG pile adjustment wheel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO spare from an authorized dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214480269562,"sku":"2622HG","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/c5e598e2b8288b3b3f05cf261e95147d.jpg?v=1786670003"},{"product_id":"release-button-for-exhaust-filter-cover-for-370-series-light-gray","title":"SEBO Release Button for the Exhaust Filter Cover - 370 Series, Light Gray","description":"\u003cp\u003eEvery exhaust filter change on a SEBO 370 begins with a press on this button. Part 1884HG is the light gray release for the exhaust filter cover on the 370 COMFORT and the ELECTRONIC 370, and between filter changes it is also the catch holding that cover shut while the machine runs.\u003c\/p\u003e\u003cp\u003eIt gets worked at every service and takes a knock whenever the vacuum is set down hard on its base. Once the button cracks or its catch face wears smooth, one of two things happens: the cover fights you on the way off, or it stops latching and works itself loose in use. A cover that is not held closed lets exhaust air out where it was never meant to go, and it can rattle its way open mid-clean. Renewing the button restores clean tool-free access and a cover that stays where it is put.\u003c\/p\u003e\u003cp\u003eColour and model are the two things to confirm before ordering. The button is listed in light gray for the 370 COMFORT and the ELECTRONIC 370, and that finish is what separates it from equivalent releases used elsewhere in the range. It sits on the outside of the filter cover rather than buried in the machine, so fitting it does not mean opening the body up. Where the cover itself has cracked as well, a new button on its own will not settle the problem.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT and ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003eFunction: releases and latches the exhaust filter cover\u003c\/li\u003e\n\u003cli\u003eColour: light gray\u003c\/li\u003e\n\u003cli\u003eReplace when: the button is cracked, the cover will not stay latched, or the cover has become hard to release\u003c\/li\u003e\n\u003cli\u003ePart number: 1884HG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is a sensible line to add when a fresh exhaust filter is already going on the order, so the cover assembly and the filter behind it are dealt with together. Anyone looking for a SEBO 370 filter cover release, an exhaust cover latch or a 370 COMFORT filter door button wants this part. Genuine SEBO stock, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214481055994,"sku":"1884HG","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/eadd6c6a5732e2530a1d2aa483c5dda8.jpg?v=1786669822"},{"product_id":"brush-roller-release-button-for-370-comfort-light-gray","title":"SEBO Brush Roller Release Button for the 370 COMFORT - Light Gray","description":"\u003cp\u003ePulling the brush roller out for a hair clean-out depends on one small component. Part 20120ER is the release button in light gray for the SEBO 370 COMFORT, and the same button locks the roller back down once it is in place.\u003c\/p\u003e\u003cp\u003eRoutine brush maintenance means working this button regularly, and in a house with pets or long hair that can be every few weeks. Eventually it cracks, or its catch face wears smooth. The roller then either fights being freed or refuses to sit locked afterwards, which lets it shift under load and pulls the belt out of line. A fresh button restores tool-free removal and a firm hold on the roller.\u003c\/p\u003e\u003cp\u003eLight gray and the 370 COMFORT are the two details to confirm before ordering. The button is reached from the underside with the roller out, so the job needs no more dismantling than the roller removal itself. Wear here is entirely predictable from how the machine is used: a household with pets works the release far harder than one without, and a button pressed thousands of times will show a polished, rounded catch face long before it actually cracks. Anyone searching for a SEBO 370 brush roller release or a 370 COMFORT roller catch has found the right part.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT\u003c\/li\u003e\n\u003cli\u003eFunction: releases and locks the brush roller\u003c\/li\u003e\n\u003cli\u003eColour: light gray\u003c\/li\u003e\n\u003cli\u003eReplace when: the roller is hard to remove, will not lock down, or the button is cracked or slack\u003c\/li\u003e\n\u003cli\u003ePosition: underside of the cleaning head, at the brush roller\u003c\/li\u003e\n\u003cli\u003ePart number: 20120ER\u003c\/li\u003e\n\u003cli\u003eOrder with: 20121 release spring, or 20121ER for a ten pack of the same spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe spring behind the release is a separate item and it wears over the same period, so the two are worth ordering together, since a new button on a tired spring will still feel vague. Genuine SEBO part, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214481350906,"sku":"20120ER","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5c109c4fe31b153db215f321ddd038bc.jpg?v=1786669844"},{"product_id":"power-supply-cord-for-370-series-dark-gray","title":"SEBO Power Supply Cord for the 370 Series - Dark Gray","description":"\u003cp\u003eA nicked, pulled or repeatedly taped mains lead sends plenty of good vacuums to the kerb early, and it does not have to. Part 1954DG is the factory power supply cord for the SEBO 370 in dark gray, supplied as a complete lead rather than a splice or a repair kit.\u003c\/p\u003e\u003cp\u003eCords fail where they are stressed. The strain relief where the lead enters the machine is one place, the plug end is another, and anywhere the cable has been run over by the nozzle or dragged out of a socket by the flex is a third. The outer sheath splits, the copper inside work-hardens and breaks strand by strand, and the machine begins cutting out whenever the lead is moved. Exposed conductors are a shock and a fire risk, which puts a damaged cord firmly in the replace-now category rather than the keep-an-eye-on-it one.\u003c\/p\u003e\u003cp\u003eDark gray is the finish listed for the 370, and the lead is supplied whole rather than as a length to be cut and terminated, so nothing needs specifying beyond the model. It covers the 370 COMFORT and the ELECTRONIC 370 alike. A cord that has been taped mid-run is not repaired, only hidden, and taped joints are the ones that fail again first in a machine dragged around a house every week.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT and ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003eColour: dark gray\u003c\/li\u003e\n\u003cli\u003eSupplied as: one complete replacement cord\u003c\/li\u003e\n\u003cli\u003eReplace when: the sheath is cut or taped, the machine cuts out as the lead is flexed, or the plug end is damaged\u003c\/li\u003e\n\u003cli\u003ePart number: 1954DG\u003c\/li\u003e\n\u003cli\u003eOrder alongside: 20115 wire tie for the 370 COMFORT, since the original is usually cut during the job\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMains wiring should be handled by someone competent to do it, and any vacuum service shop will fit one quickly. Searches for a SEBO 370 power cord, an ELECTRONIC 370 mains lead or a 370 COMFORT cord replacement all point at this part. Genuine SEBO cord, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214486003962,"sku":"1954DG","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/687f43839c2bc062c17024c98ba39150.jpg?v=1786669828"},{"product_id":"wire-from-motor-to-micro-safety-switch-for-370-electronic","title":"SEBO Motor-to-Safety-Switch Wire for the ELECTRONIC 370","description":"\u003cp\u003eBetween the motor and the micro safety switch of an ELECTRONIC 370 runs a single made-up lead with its terminals already fitted. Part 0849UL is that lead, cut to length and crimped the way SEBO builds it, so nothing has to be improvised from bulk wire and a bag of loose connectors.\u003c\/p\u003e\u003cp\u003eIt lives in a hot, vibrating corner of the machine. Over the years the insulation stiffens, a crimp works loose in its shell, and the circuit begins to open and close on its own: the machine cuts out mid-pass, or refuses to start until the housing is tapped. Because this lead forms part of a protective circuit rather than a convenience feature, an intermittent connection here is not something to nurse along for another season. Fits the SEBO ELECTRONIC 370.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e SEBO 0849UL, pre-terminated wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns between:\u003c\/strong\u003e the motor and the micro safety switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch at the far end:\u003c\/strong\u003e part 0531\/1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the insulation is hardened or discoloured, or a terminal pulls off under light load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e a made-up lead, cut to length with both terminals crimped on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptoms:\u003c\/strong\u003e the machine cuts out mid-pass, or starts only after the housing is knocked\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWith the machine unplugged, flex the old lead along its length before deciding. A conductor broken inside insulation that still looks perfect feels soft at one point and shows continuity only while held straight, which is exactly the behaviour that makes these faults so hard to pin down. Route the new wire the way the original ran and keep it clear of anything that moves.\u003c\/p\u003e\u003cp\u003eGenuine SEBO internal wire for the 370 ELECTRONIC, ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214486954234,"sku":"0849UL","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0849UL.jpg?v=1709349122"},{"product_id":"internal-cable-through-bag-housing-for-370-series","title":"SEBO Internal Cable Through Bag Housing for 370 Comfort and Electronic 370","description":"\u003cp\u003ePower that flickers on and off as the handle is moved usually ends at a lead like this one. Part 1833UL is the internal cable routed through the bag housing of the SEBO 370 Comfort and Electronic 370.\u003c\/p\u003e\u003cp\u003eFlexing at the same two points for years fatigues the strands inside the insulation, and the break can be completely invisible from outside the sheath. That is what makes this fault so misleading: the cable looks perfect, the fault comes and goes with the machine's posture, and the components at either end get suspected first. Once a continuity test with the lead gently flexed puts the fault in this section, renewing the run is a permanent fix rather than a temporary one. Intermittent power, a machine that cuts out when reclined, and a dead circuit downstream of the housing all point the same way.\u003c\/p\u003e\u003cp\u003eAny work here is mains wiring, so treat it accordingly and hand it to a technician if that is not familiar ground.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e internal power lead routed through the bag compartment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAddresses:\u003c\/strong\u003e intermittent power and dead circuits downstream\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1833UL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e female contact holder 1836UL, cable connection cover 1812HG, and bag housing 1831HG, which is supplied with its internal cable already fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe diagnosis is worth doing properly rather than by substitution. With the machine unplugged, put a meter across the run and flex the lead by hand along its length; a reading that jumps as the cable moves confirms the break is inside this section and not at a connector. Searches for a SEBO 370 internal wire or an Electronic 370 housing cable land on 1833UL.\u003c\/p\u003e\u003cp\u003eGenuine SEBO through an authorized dealership, usually shipping in 2–5 business days. Unplug the machine before starting, copy the original routing exactly so the new lead clears the moving parts, and check the terminals at both ends for heat marks while they are accessible. A lead that has been arcing at a loose contact will have marked the contact as well as itself.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214487445754,"sku":"1833UL","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/71a294bd123314e35d56d3f8dfb8d957.jpg?v=1786669787"},{"product_id":"wire-swivel-neck-for-370-electronic","title":"SEBO Swivel Neck Wire for the ELECTRONIC 370","description":"\u003cp\u003eIntermittent power at the floor head is the classic reason this lead gets ordered. Part 2611UL is the factory wire that runs through the steering neck of the SEBO ELECTRONIC 370, carrying the supply across the joint where the body pivots over the cleaning head.\u003c\/p\u003e\u003cp\u003eEvery recline and every turn works this conductor, and after enough cycles a strand breaks inside the insulation or a terminal backs off its spade. The give-away symptom is power that comes and goes with handle position rather than a machine that is dead outright: the head cuts out as the body is laid back, or comes on again when the handle is nudged. That behaviour is easy to blame on the board, which is exactly why the neck is the first place to look.\u003c\/p\u003e\u003cp\u003eBeing a made-up lead, the SEBO replacement arrives with the correct length and terminations, so there is no splicing to do. Unplug the machine, note the original cable path and every clip or grommet before the old wire comes out, then route the new one the same way, since a lead pinched at the pivot will fail again quickly. If the joint itself feels loose, the swivel neck assembly is 2609UL and the brace behind it is 2613; if the wiring proves sound, the electronic controller is 2572ER.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2611UL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e carries the supply across the pivoting neck joint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e head power that changes with handle position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting note:\u003c\/strong\u003e unplug the machine and copy the original cable path exactly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 2609UL swivel neck assembly, 2613 swivel support, 2572ER PCB electronic controller\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO lead from an authorized dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214487511290,"sku":"2611UL","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3c332750a33859a33caa9d75ed328c8b.jpg?v=1786669994"},{"product_id":"female-contact-holder-for-370-series","title":"SEBO Female Contact Holder for 370 Comfort and Electronic 370","description":"\u003cp\u003eMoulded insulation with pockets sized so the female terminals inside a SEBO 370 Comfort or Electronic 370 sit square and stay apart. Part 1836UL is that holder.\u003c\/p\u003e\u003cp\u003eScorch marks around a terminal, or a connector that feels slack when it is pushed home, mean the holder has lost its grip. Contacts that can move begin to arc, arcing burns and pits the metal, and pitted contacts run hotter still — the failure feeds itself, and the longer it continues the more of the surrounding assembly it takes with it. A fresh holder re-establishes the spacing and the retention the connection was designed around, which is the only way to break that cycle properly.\u003c\/p\u003e\u003cp\u003eIt is a small insulating part with a safety function, so it is not a component to improvise around with tape or adhesive.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e insulating holder for the female contacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps:\u003c\/strong\u003e terminals aligned, spaced and retained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1836UL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e internal cable 1833UL and cable connection cover 1812HG for the same machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA burnt or acrid smell around the connection area is the symptom that should stop everything until the joint has been looked at, and a holder that has discoloured with heat should not go back in whatever its condition otherwise. Anyone searching for a SEBO 370 terminal holder, a contact block or an Electronic 370 connector insulator is looking at part 1836UL.\u003c\/p\u003e\u003cp\u003eGenuine SEBO through our authorized dealership, usually moving in 2–5 business days. Disconnect the machine from the mains first, then examine the terminals for pitting and discolouration while they are out — a holder that failed because of arcing has almost certainly left its mark on the contacts, and renewing the insulation while leaving burnt metal in place solves only half the problem. Seat each terminal fully until it latches in its pocket.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214488854778,"sku":"1836UL","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5c388911cbdbdb218c6350da434d4758.jpg?v=1786669793"},{"product_id":"dust-bag-housing-w-internal-cable-for-370-series-light-gray","title":"SEBO Dust Bag Housing with Internal Cable for 370 Comfort and Electronic 370 — Light Gray","description":"\u003cp\u003eReplacing a latch, a clip or a door seal only goes so far. Part 1831HG is the complete light gray dust bag housing for the SEBO 370 Comfort and Electronic 370, and it arrives with the internal cable already routed through the moulding.\u003c\/p\u003e\u003cp\u003eHousings get changed after a fall cracks the shell, after a bag has been forced against a broken door, or when the compartment simply will not seal again no matter how many small parts have been renewed. That last case is the common one and the most frustrating, because a housing that has been distorted holds the door out of true everywhere at once, and each individual component tests fine on its own. Having the cable supplied pre-fitted takes the fiddly threading work out of the repair and removes the main opportunity to get the routing wrong.\u003c\/p\u003e\u003cp\u003eLight gray matches the external mouldings across the 370 range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e complete dust bag housing with the internal cable fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1831HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e bag housing bumper 1804HG, bag holder 1847, safety catch 1817, locking rod 1811 and attachment clip 1823HG, all listed for the same machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBefore committing to a full housing, it is worth ruling out the smaller failures one at a time: the door latch parts, the bag holder and the catch that retains it. A housing is the right answer when the shell itself is cracked or distorted, and the giveaway is a door that will not sit evenly no matter which individual component is renewed.\u003c\/p\u003e\u003cp\u003eGenuine SEBO, generally shipping in 2–5 business days. Transfer the bag holder and catches from the old shell unless those are being replaced too, and use the swap as the moment to renew anything that has been marginal — the bumper and the door latch parts are far easier to fit with the housing off the machine than on it. Unplug the vacuum before disturbing the cable, and photograph the assembly before it comes apart.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214491476218,"sku":"1831HG","price":76.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/b98c07fc9045060646275e045bc92a1e.jpg?v=1786669785"},{"product_id":"cable-hook-for-370-series-light-gray","title":"SEBO Cord Storage Cable Hook for 370 Comfort and Electronic 370 — Light Gray","description":"\u003cp\u003eCord that refuses to stay wrapped is nearly always a hook fault rather than a cord fault. Part 1813HG is the light gray cable hook that the SEBO 370 Comfort and Electronic 370 wind their mains lead around for storage.\u003c\/p\u003e\u003cp\u003eYears of yanking the lead free in a hurry crack the moulding at its root or snap a tip away entirely, and what is left cannot hold a coil. The cord then trails behind the machine between rooms, where it collects the crush damage and door-edge nicks that shorten its life far more effectively than any amount of vacuuming does. A hook with a broken tip is also worth catching early because the coil slips off progressively rather than all at once, and most owners simply adjust how they wrap the cord until the day it stops working entirely.\u003c\/p\u003e\u003cp\u003eThe replacement mounts on the original fixing point, so the repair is a short one and needs no modification to the machine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e cord storage hook for the mains lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores:\u003c\/strong\u003e a solid anchor for the coiled cord\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1813HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e cable connection cover 1812HG and handle tube 1848 for the same machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA hook that is cracked at the root rather than snapped off is the one to catch early, since it will still hold a loose coil and gives no obvious warning until the day it lets the whole lead go. Searches for a SEBO 370 cord hook, a 370 Comfort cable hook or an Electronic 370 cord winder all land on part 1813HG.\u003c\/p\u003e\u003cp\u003eGenuine SEBO from an authorized dealer, usually shipping in 2–5 business days. Unhook the cord by rotating it off the tip rather than dragging it straight down and the new hook will last considerably longer. While the old one is off, run the lead through your fingers along its length and check for flat spots or nicks left by the period it spent trailing on the floor.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214494523642,"sku":"1813HG","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/4d74aa93501688f527dddf5f0d7f745a.jpg?v=1786669757"},{"product_id":"carrying-handle-for-370-series-light-gray","title":"SEBO Carrying Handle for 370 Comfort and Electronic 370 — Light Gray","description":"\u003cp\u003eLifting an upright up a flight of stairs puts the entire weight of the machine on one moulded grip. Part 1814HG is the light gray carrying handle used on the SEBO 370 Comfort and Electronic 370.\u003c\/p\u003e\u003cp\u003eFatigue cracks start quietly at the mounting ears, where the load concentrates, and spread until the grip lets go with the vacuum off the ground. A handle that has begun to flex noticeably under load, or that shows a hairline split near a fixing, is worth swapping before it costs a cracked housing on the landing below — the handle is a small part, and what it drops is not. Stress whitening around the fixings is the tell to look for: the plastic goes pale where it has been worked, and that pallor appears well before anything visibly opens up.\u003c\/p\u003e\u003cp\u003eThe replacement bolts to the original mounting points and needs no drilling or adaptation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e moulded carrying handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts on:\u003c\/strong\u003e the original fixing points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1814HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e handle tube 1848 and complete front cover 1846HG, both listed for the same models\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHandles are among the first casualties on machines that live in commercial use, where they are carried between floors several times a day rather than a few times a year. If the vacuum is used that way, treat the grip as a wearing part and inspect the mounting ears whenever the machine is serviced rather than waiting for a noise or a drop.\u003c\/p\u003e\u003cp\u003eGenuine SEBO, generally shipping in 2–5 business days. Check the fixings and their holes for elongation while the old grip is off, because a handle that has been working loose will have started to wear its own mountings oval, and a new grip on tired fixings will not feel any more solid than the one it replaced. Anyone searching for a SEBO 370 carry handle or a 370 Comfort lifting handle is looking at the right listing.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214496162042,"sku":"1814HG","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/7f83c4f83d7206b851e609e9734d5427.jpg?v=1786669760"},{"product_id":"front-cover-complete-for-370-series-light-gray","title":"SEBO Complete Front Cover for 370 Comfort and Electronic 370 — Light Gray","description":"\u003cp\u003eSold as a complete assembly rather than a bare shell, 1846HG is the light gray front cover for the SEBO 370 Comfort and Electronic 370.\u003c\/p\u003e\u003cp\u003eFront panels take the punishment on an upright: doorframes, stair nosings, the corner of a heavy desk. Once the moulding is cracked or its fixing bosses have pulled through, the panel no longer sits flush, the parts behind it are left half exposed, and the machine picks up rattles it never had when new. A panel that has been running loose also works on its own mountings, so what starts as one broken boss tends to become three. Cosmetic damage is the visible half of the problem; the useful half is that a front cover sitting proud stops protecting what is behind it.\u003c\/p\u003e\u003cp\u003eLight gray matches the external mouldings used across the 370 range, and the assembly arrives ready to fit rather than needing parts transferred across.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e complete front cover assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces:\u003c\/strong\u003e cracked panels and pulled fixing points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1846HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e front cover release 1818GS and its holder 1819, both worth inspecting during the same job\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eColour matters on a panel this visible, so check the shade of the machine's other external mouldings before ordering — 1846HG is the light gray assembly. Searches for a SEBO 370 front panel, a 370 Comfort front cover or an Electronic 370 front housing all describe this part.\u003c\/p\u003e\u003cp\u003eGenuine SEBO, usually shipping in 2–5 business days. Check the release and its seat while the front of the machine is open, since a cover that has been forced against a sticking latch has usually damaged both, and fitting a new panel to a worn release simply repeats the failure. Make sure the new cover closes with an even gap all the way round before calling the job finished.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214498586874,"sku":"1846HG","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/f72494fb84f830b7072baa2850cd829f.jpg?v=1786669799"},{"product_id":"locking-rod-for-bag-housing-for-370-series","title":"SEBO Bag Housing Locking Rod for 370 Comfort and Electronic 370","description":"\u003cp\u003eA dust compartment door that springs open part-way through a room usually points at the rod holding it shut. Part 1811 is the locking rod fitted to the bag compartment of the SEBO 370 Comfort and Electronic 370 uprights.\u003c\/p\u003e\u003cp\u003eThe rod carries the clamping load every time the door is pushed closed, so one that has taken a bend or lost its tension stops pulling the panel down tight. Air then finds the gap instead of passing through the filter bag, and cleaning power falls away even though the bag and the motor are perfectly healthy. That is the version of this fault worth understanding: long before the door actually flies open, a rod that is merely tired costs suction quietly, and the usual response is to change bags more often rather than to look at the latch.\u003c\/p\u003e\u003cp\u003eA quick test tells you which you are dealing with. Close the door and try to rock it at the corner furthest from the latch; any movement there means the clamp is no longer even, and the rod is the first thing to inspect.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e locking rod for the dust bag compartment door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores:\u003c\/strong\u003e a firm clamp and a properly sealed bag chamber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1811, a factory SEBO service part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e bag holder safety catch 1817, complete bag holder 1847 and complete bag housing 1831HG for the same machines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick check:\u003c\/strong\u003e with the door shut, try to rock its far corner — movement there means the clamp is uneven and the rod is the first suspect\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO through an authorized dealership, normally shipping in 2–5 business days. If the door has ever been forced, inspect the safety catch and the holder at the same time, since a bent rod and a strained catch usually happen in the same incident. Anyone searching for a SEBO 370 bag door latch rod or a 370 Comfort dust compartment locking rod has found the right part.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214500684026,"sku":"1811","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5df603c0b76b282c1902657513375bb8.jpg?v=1786669752"},{"product_id":"power-head-cover-complete-for-370-electronic-dark-gray","title":"SEBO Power Head Cover for the ELECTRONIC 370 — Dark Gray, Complete","description":"\u003cp\u003eOnce the top shell over a brush chamber splits, grit reaches the belt and the gears and the head stops sitting square on the floor. Part 2623AM is the dark gray power head cover for the SEBO ELECTRONIC 370, supplied as a complete assembly.\u003c\/p\u003e\u003cp\u003eThe cover does more than tidy the head up. It closes the brush chamber so air is drawn through the nozzle rather than through a crack in the housing, it keeps hair and grit off the belt run, and it carries fixing points that clamp the head together as one rigid unit. A cracked cover therefore costs airflow and alignment at the same time, and the damage usually starts at a corner or a screw boss after the machine has been dropped or run hard into furniture.\u003c\/p\u003e\u003cp\u003eBecause it ships made up rather than as a bare moulding, the repair is a single swap: lift the damaged shell away, transfer the head across, and refasten. That is the natural moment to look over the brushroll, the belt and the bearings, since every one of them is exposed while the cover is off. If the frame underneath has cracked too, the complete light gray chassis for this machine is 2543HG.\u003c\/p\u003e\u003cp\u003eColour matters when ordering, and this is the dark gray version. Anyone searching for a SEBO 370 power head cover or a brush chamber cover for an ELECTRONIC 370 is looking at this number.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e dark gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2623AM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e complete cover assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the shell is cracked, distorted or has lost a fixing point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 2543HG complete chassis, 2614HG complete wheel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO component from an authorized dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214503600378,"sku":"2623AM","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/373e0b7f98bafee0fff0f8f016e11396.jpg?v=1786670006"},{"product_id":"filter-safety-catch-rod-for-370-series","title":"SEBO Filter Safety Catch Rod for 370 Comfort and Electronic 370","description":"\u003cp\u003eThe filter cover on a SEBO 370 cannot lock down without the rod running through its safety catch. Part 1824 is that rod, supplied for the 370 Comfort and Electronic 370.\u003c\/p\u003e\u003cp\u003eIt pivots every time the cover is opened and closed, so wear shows itself as vague, uncertain latching long before anything actually snaps. That vagueness is the part worth acting on. A cover that no longer clamps hard against its seal lets air slip around the filter rather than through it, and the loss turns up as weak suction at the floor head with no obvious cause — bag fine, filter fine, hose clear, and still the machine underperforms. Because nothing looks broken, this fault often survives several bag changes and a filter replacement before anyone thinks to check the latch.\u003c\/p\u003e\u003cp\u003eThe quick diagnostic is to close the cover and try to lift its free edge. Any give there means the clamp is not doing its job.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e pivot rod for the filter cover safety catch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores:\u003c\/strong\u003e positive, repeatable latching of the filter cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1824\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part:\u003c\/strong\u003e light gray exhaust filter cover 1802HG, listed for the same machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is a quick part to fit while the filter cover is already off, so it is worth ordering alongside a cover or a filter rather than making a separate job of it later. Work the catch several times after fitting and listen for a definite, repeatable click — that sound is the difference between a cover that seals and one that merely closes.\u003c\/p\u003e\u003cp\u003eGenuine SEBO from an authorized dealer, generally shipping in 2–5 business days. Check the catch and its keeper together while the cover is off, since a worn rod usually means the mating surfaces have been rubbing out of alignment for a while. If the cover itself has cracked tabs, renew both at once rather than expecting a new rod to pull a damaged cover flat.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214505959674,"sku":"1824","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/de9250193158488d63976e6ee14addd3.jpg?v=1786669777"},{"product_id":"handle-catch-w-hardware-for-370-series-dark-gray","title":"SEBO Handle Catch with Hardware for the 370 COMFORT and ELECTRONIC 370 — Dark Gray","description":"\u003cp\u003eDark gray moulding, mounting hardware in the bag, one job: hold the handle where it was put. Part 0850DG is the catch that keeps a SEBO 370 upright from drifting out of its set position while the machine is in use, and it arrives complete with the screws that fix it.\u003c\/p\u003e\u003cp\u003eThe catch takes a shove every time the handle is dropped back for a low pass under furniture and hauled upright again at the end of it, so the wear is mechanical and cumulative rather than sudden. It holds loosely at first, then the handle begins to creep down on its own, and eventually the machine will not stand up unaided at all. Fits the SEBO 370 COMFORT and the ELECTRONIC 370.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e SEBO 0850DG, handle catch supplied with hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 370 COMFORT and ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied with:\u003c\/strong\u003e fresh screws, so nothing is carried over from the broken part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther 370 handle parts:\u003c\/strong\u003e 1037EH for the light gray grip kit, 1596HG for the cover, grommet and screw on their own\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the handle creeps down on its own, will not lock upright, or the catch has cracked\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob it does:\u003c\/strong\u003e holds the handle at its set angle through reclining and lifting\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eColour matters on a visible component like this one, so compare the dark gray finish against the machine before ordering rather than after. Fit the new catch with the supplied screws and work the handle through its full travel a few times to confirm it locks at each position.\u003c\/p\u003e\u003cp\u003eAnyone searching for a SEBO 370 handle lock, a 370 COMFORT handle catch replacement, or an ELECTRONIC 370 whose handle no longer stays upright is looking at 0850DG. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214506189050,"sku":"0850DG","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/ccceed7eed1e00f4fd463b4195ec9469.jpg?v=1786669720"},{"product_id":"chassis-complete-for-370-electronic-light-gray","title":"SEBO Chassis, Complete, for the ELECTRONIC 370 — Light Gray","description":"\u003cp\u003eEvery other component in an upright is positioned by the chassis, so when the frame distorts nothing bolted to it sits where the design intended. Part 2543HG is the complete light gray chassis for the SEBO ELECTRONIC 370, supplied built up rather than as a bare moulding.\u003c\/p\u003e\u003cp\u003eThe chassis carries the brushroll and its bearings, sets the belt line, and holds the fixing points that pull the outer covers and base panels together as one rigid unit. It is what keeps the roller parallel to the floor across its full width and what holds the head at a consistent ride height. Cracks usually begin at a mounting boss, often where a screw has been overtightened or the machine has been run hard into a doorframe, and they spread until the frame flexes under load. From there the vacuum runs noisier, the belt starts tracking off centre, and one end of the brush wears flat well before the other.\u003c\/p\u003e\u003cp\u003eA genuine SEBO ELECTRONIC 370 chassis replacement is a rebuild rather than a straight swap. Move the internals across one at a time so each goes back in its original orientation and nothing is left over at the end. With the head stripped this far, the bearings, belt condition and cable routing are all worth inspecting, and the swivel neck cover 2602HG and pile adjustment wheel 2608HG are the neighbouring light gray parts most often found damaged by the same impact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2543HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e complete chassis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReuses:\u003c\/strong\u003e your existing internal components and hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorth checking during the rebuild:\u003c\/strong\u003e bearings, belt condition and cable routing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 2602HG swivel neck cover, 2608HG pile adjustment wheel, 2609UL swivel neck assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO component from an authorized dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214510645498,"sku":"2543HG","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2543HG.jpg?v=1785146912"},{"product_id":"c-clip-for-handle-catch-10-pack-4-din-6799-for-x4-x5-x7-x8-and-370-series","title":"SEBO Handle Catch C Clip (4, DIN 6799) for AUTOMATIC X4, X5, X7, X8 and 370 Series — 10 Pack","description":"\u003cp\u003eSmall retaining clips ping across a workshop floor and are never seen again, which on its own justifies buying 0161ER in tens rather than singly. It is the 4 DIN 6799 C clip that retains the handle catch pin on the AUTOMATIC X uprights and across the 370 series, listed at position 53 on the sheet titled AUTOMATIC X7 X8. Singles of the same clip are stocked as 0161.\u003c\/p\u003e\u003cp\u003eEach clip snaps sideways into the machined groove on the catch pin and stops it sliding out while the handle is being locked upright and released again. DIN 6799 is the standard for exactly that kind of open, horseshoe-shaped retaining washer — it goes on across the shaft instead of over the end of it, which is the only way to fit one inside a handle catch without dismantling half the joint. The size figure refers to the groove diameter it grips.\u003c\/p\u003e\u003cp\u003eFatigue eventually spreads the ring until it no longer holds, and from that point the pin migrates and the catch becomes unreliable: the handle will not lock upright, will not hold its reclined angle, or has gone loose at the pivot. With ten in the drawer the repair takes minutes and there is stock left over for the next machine through the door. Anyone in there anyway should look at the pin the clip retains, since a clip that has been slack for a while lets the pin wear its own flat.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSEBO part 0161ER — C clip 4 to DIN 6799, ten per pack\u003c\/li\u003e\n\u003cli\u003eFits SEBO AUTOMATIC X4, AUTOMATIC X4 Boost, AUTOMATIC X5, AUTOMATIC X7 Premium, AUTOMATIC X7 Pet and AUTOMATIC X8\u003c\/li\u003e\n\u003cli\u003eAlso fits the 370 COMFORT and the ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003eConstruction: open side-fitting retaining clip to DIN 6799, size 4\u003c\/li\u003e\n\u003cli\u003eDiagram position: 53 on the AUTOMATIC X7 X8 sheet\u003c\/li\u003e\n\u003cli\u003ePack: ten clips. Singles are stocked as 0161\u003c\/li\u003e\n\u003cli\u003eReplace when: the handle catch will not latch, or the catch pin has started to walk out of its bore\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO part from an authorized dealer; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214511268090,"sku":"0161ER","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/8fc802fd44679688977c90203e25e161.jpg?v=1786667980"},{"product_id":"cover-for-cable-connection-for-370-series-light-gray","title":"SEBO Cable Connection Cover for 370 Comfort and Electronic 370 — Light Gray","description":"\u003cp\u003eLight gray moulding that closes off the point where the mains lead joins the body of a SEBO 370 Comfort or Electronic 370. Part 1812HG is the factory shell for that junction.\u003c\/p\u003e\u003cp\u003eLeft off after a repair, or split by a knock against a doorframe, the joint sits open to grit and the conductors behind it have nothing shielding them from a snag. That is the real argument for refitting it: the cover is not decorative trim but the physical protection for a live termination, and an unprotected joint is one tug away from a strain that reaches the terminals themselves. A cracked cover also lets the cable move where the design intends it to be held still, and movement at a termination is what eventually breaks conductors inside their insulation.\u003c\/p\u003e\u003cp\u003eFitting one back on is a short job and a sensible finish to any cord or switch work already underway on the machine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e cover for the cable termination point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps:\u003c\/strong\u003e dust and impacts away from the wiring joint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1812HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e internal cable 1833UL, female contact holder 1836UL and cord storage hook 1813HG, all listed for the same models\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSecond-hand machines arrive without this cover more often than any other part on the list, because it is the piece most likely to be left in a toolbox after someone else's repair. Fitting one back is quick, needs no wiring work in itself, and is the sensible last step of any cord or switch job already underway.\u003c\/p\u003e\u003cp\u003eGenuine SEBO, shipping in 2–5 business days. Unplug the vacuum before removing the old cap, and look the terminals over for heat marks or discolouration while the area is open — this is the one moment in the machine's life when they are easy to see. Refit the cover so it sits flat and its fixing pulls the cable back into its intended path rather than clamping it at an angle.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214515167482,"sku":"1812HG","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/e80dff15ef6d2c19a61c7cdf12b40235.jpg?v=1786669754"},{"product_id":"hose-intake-cover-for-370-series-gray-black","title":"SEBO Hose Intake Cover for 370 Comfort and Electronic 370 — Gray Black","description":"\u003cp\u003eWhere the hose meets the body of a SEBO 370 Comfort or Electronic 370 there is a gray black moulding across the intake port, and 1835GS is that piece.\u003c\/p\u003e\u003cp\u003eA cracked one stops sitting flat over the opening, so the port bleeds air on the upright side and lets grit into the passage behind it. The result is a hose that cleans weakly for reasons the bag and filters cannot explain, which sends plenty of owners chasing the wrong fault entirely — new bag, new filters, and no improvement, because the air was never reaching the hose in the first place. The give-away is that floor cleaning is unaffected while everything done through the hose feels tired.\u003c\/p\u003e\u003cp\u003eGray black is the finish for this cover, and it is worth handling the replacement gently: the same crack that finished the original usually starts at a fixing point being over-tightened.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e cover for the hose intake port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps:\u003c\/strong\u003e the port sealed and free of debris\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1835GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part:\u003c\/strong\u003e connector tube 1807HG, which carries the same air path up to the wand and is the other common source of this symptom\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAnimal hair and fine grit pack into the intake port faster than most owners expect, and a cover that no longer sits flat lets both straight in. Clearing the port takes a minute with the cover off and is the sort of thing that only gets done when a part is being changed anyway, which makes this a good moment for it.\u003c\/p\u003e\u003cp\u003eGenuine SEBO from an authorized dealer, generally shipping in 2–5 business days. Clear the port of packed dust before the new cover goes on, and check the hose cuff at the same time since a cuff that has gone slack produces an almost identical loss. Anyone searching for a SEBO 370 hose port cover or a 370 Comfort intake cover in gray black is looking at the right listing.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214515298554,"sku":"1835GS","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/dbdf6e7e4db518f24f1fde05b4336d3a.jpg?v=1786669790"},{"product_id":"side-cover-for-cleaning-wand-with-lens-and-on-off-button-for-370-series-light-gray","title":"SEBO Wand Side Cover with Lens and On\/Off Button for 370 COMFORT and ELECTRONIC 370 - Light Gray","description":"\u003cp\u003eThree separate faults, one part number. 1852HG is the light gray wand panel used on the SEBO 370 COMFORT and ELECTRONIC 370, supplied with the indicator lens and the on\/off button already fitted into it. It closes the side of the wand tube, carries the switch the machine is started and stopped with, and holds the window the indicator shines through.\u003c\/p\u003e\u003cp\u003eBecause those three items come as one moulding, a cracked panel, a button that no longer presses cleanly and a lens gone cloudy or missing are all settled by the same order. It also avoids the familiar trap of transferring a tired button across to a new cover and finding the fault has followed it over. Damage here is usually impact damage, since the wand is what takes the weight when an upright is leaned on a wall or dropped onto its side, and once the panel splits, dust starts reaching the switch behind it.\u003c\/p\u003e\u003cp\u003eThe wand is one of the few places on a 370 where a single moulding carries an electrical function, so it pays to be deliberate about the order. The cover is listed in light gray for the 370 COMFORT and the ELECTRONIC 370, and the finish is what separates it from the other side-cover numbers in the range. Compare the panel on your own machine against the picture before ordering. If the lens alone has failed and the panel around it is sound, the separate lens is the smaller job of the two.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFitment: SEBO 370 COMFORT and ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003eShade: light gray, matched to the original 370 series mouldings\u003c\/li\u003e\n\u003cli\u003eSupplied with: the indicator lens and the on\/off button in place\u003c\/li\u003e\n\u003cli\u003eReplace when: the panel is cracked, the button sticks or feels dead, or the lens is scratched, clouded or gone\u003c\/li\u003e\n\u003cli\u003ePart number: 1852HG\u003c\/li\u003e\n\u003cli\u003eRelated: 1869HG light gray lens for the bag indicator and switch cover, 1862 switch return spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWork the new button a few times before the wand goes back together so you can feel the click through the moulding. If the switch action was the original complaint, the return spring behind it is worth ordering at the same time, because a sunken button is more often the spring than the cover. Genuine SEBO part, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214515331322,"sku":"1852HG","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1852HG.jpg?v=1709348883"},{"product_id":"cover-for-bearing-block-l-h-for-370-comfort","title":"SEBO Left-Hand Bearing Block Cover for the 370 COMFORT","description":"\u003cp\u003eLeft-hand bearing blocks sit behind a cap, and part 20123ER is that cap for the SEBO 370 COMFORT. It closes over the block supporting the left end of the brush roll, keeping the bearing seated in its housing and shielded from whatever the roller picks up off the floor.\u003c\/p\u003e\u003cp\u003eHair and fine grit are what finish off brush roll bearings, and this cover is the first line of defence against both. Once it cracks or goes missing, debris reaches the bearing directly and the block itself can start working loose in its housing. Noise and a wobbling roller follow soon after, and by that stage the bearing has usually been damaged as well. A new cover restores both the shield and the location, which is why it is worth fitting before the noise starts rather than after.\u003c\/p\u003e\u003cp\u003eLeft-hand is the important word here, since the two ends of the roller are not interchangeable and the right-hand side carries its own part number. This cover is listed for the 370 COMFORT. It is better treated as a service item than a repair item, because a sound cover is what keeps a good bearing good. Anyone searching for a SEBO 370 bearing block cover, a brush roll bearing cap or a 370 COMFORT roller end cover is looking at this component.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT\u003c\/li\u003e\n\u003cli\u003ePosition: left-hand end of the brush roll\u003c\/li\u003e\n\u003cli\u003eFunction: closes over and retains the bearing block\u003c\/li\u003e\n\u003cli\u003eReplace when: the cover is cracked, loose or missing, or the roller has developed play at the left end\u003c\/li\u003e\n\u003cli\u003ePart number: 20123ER\u003c\/li\u003e\n\u003cli\u003eRelated: 20117ER right-hand bearing block, 20120ER brush roller release button, 20121 release spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eClear the wound thread out of the bearing while the cover is off and judge its condition before refitting, since the two ends of a roller almost always wear together. Genuine SEBO component, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214515429626,"sku":"20123ER","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/226614ff36ebff97bbf1ff4e957ac8c0.jpg?v=1786669853"},{"product_id":"swivel-neck-cover-for-370-series-light-gray","title":"SEBO Swivel Neck Cover for the 370 COMFORT and ELECTRONIC 370 — Light Gray","description":"\u003cp\u003eCosmetic and protective at the same time, the swivel neck cover closes off the pivot where the cleaning head hinges from the body. Part 2602HG is the light gray cover shared by the SEBO 370 COMFORT and the SEBO ELECTRONIC 370.\u003c\/p\u003e\u003cp\u003eIt is the piece that takes the scrapes whenever the machine is laid flat to reach under a bed or a sofa, so a cracked, scuffed or missing cover is one of the commonest faults on a well-used 370. Left off, the pivot area is open to dust and hair, the fixings underneath are exposed to knocks, and a machine that is mechanically sound looks tired long before it is worn out. This listing is the cover on its own: on the ELECTRONIC 370 the neck assembly beneath it is a separate order under 2609UL, and the brace behind that joint is 2613.\u003c\/p\u003e\u003cp\u003eFitting is a short job with the head laid over on the bench. Check that every clip engages and that the cover sits flush all the way round, because a cover held on by only half its tabs will work loose again in normal use. If the same impact has marked the pile adjustment wheel, that part is 2608HG in the same light gray finish.\u003c\/p\u003e\u003cp\u003eThe cover has no structural role in the pivot itself; it clips over the finished joint rather than holding it together. A machine will keep running with a broken one, which is why so many are bought later, as part of tidying an otherwise sound vacuum back up. Anyone searching for a SEBO 370 swivel neck cover, or a light gray neck trim for a 370 COMFORT, is looking at this number.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 COMFORT and SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2602HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e cover only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the cover is cracked, missing, or no longer clipping down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 2609UL swivel neck assembly, 2613 swivel support, 2608HG pile adjustment wheel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO spare, authorized dealer stock. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214515659002,"sku":"2602HG","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/538e1801ed5443671b40eafb14033563.jpg?v=1786669898"},{"product_id":"brush-strip-cover-for-370-comfort-light-gray","title":"SEBO Brush Strip Cover for the 370 COMFORT - Light Gray","description":"\u003cp\u003eThis light gray panel guards the brush strip area of the sole plate, and part 20118ER is the genuine SEBO cover for the SEBO 370 COMFORT. It encloses that stretch of the nozzle underside and protects the housing edge riding along the floor.\u003c\/p\u003e\u003cp\u003eConstant contact with carpet and hard flooring scuffs the cover, and eventually cracks it or snaps a mounting tab off it. A loose one rattles as the machine is pushed, catches fibres and thread, and leaves the brush area open where it is supposed to be closed, which changes how air moves under the head. Replacing it returns a clean, properly sealed underside and takes the rattle out at the same time.\u003c\/p\u003e\u003cp\u003eLight gray is the finish listed for the 370 COMFORT, and the condition of this cover says a good deal about how a machine has been used. Deep scoring across the face generally means grit; a snapped mounting tab generally means the cover has been levered off rather than released properly. Both are reasons to renew it, because a cover that no longer clips down flat will not hold its position under the weight of the machine. Anyone searching for a SEBO 370 brush strip cover, a 370 COMFORT sole plate cover or a light gray underside panel is looking at this number.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT\u003c\/li\u003e\n\u003cli\u003eFunction: shields the brush strip area of the sole plate\u003c\/li\u003e\n\u003cli\u003eColour: light gray\u003c\/li\u003e\n\u003cli\u003eReplace when: the cover is cracked, scuffed through, rattling, or missing a fixing tab\u003c\/li\u003e\n\u003cli\u003ePart number: 20118ER\u003c\/li\u003e\n\u003cli\u003eFitting: locates on the underside of the cleaning head, no adhesive involved\u003c\/li\u003e\n\u003cli\u003eRelated underside parts: 20107ER rear bottom plate with screws, 20117ER right-hand bearing block\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWith the cover off you have a clear view of the roller and the belt, so check both for wear before refitting. Genuine SEBO part, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214517133562,"sku":"20118ER","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/bb66294b6d39a85bf96a0b2f158daac5.jpg?v=1786669841"},{"product_id":"brush-strip-cover-with-screw-for-370-electronic","title":"SEBO Brush Strip Cover with Screw for the ELECTRONIC 370","description":"\u003cp\u003eSold with its mounting screw so nothing is missing at reassembly, 2542 is the brush strip cover fitted to the SEBO ELECTRONIC 370. The cover caps the brush strip and keeps it retained where it belongs in the cleaning head.\u003c\/p\u003e\u003cp\u003eThe strip it holds is what does the agitation work in carpet, and it can only do that job if it is held firmly at the correct height. The cover is what provides that retention. Covers get knocked out of true when the head meets something solid, lose their screw over time, or crack at the fixing point once the plastic has aged, and any of those lets the strip underneath begin to move. Anything loose inside a cleaning head eventually finds the brush roller, which turns a small part into a larger repair, so a cover that is no longer holding tight is worth changing straight away.\u003c\/p\u003e\u003cp\u003eRefitting a sound cover with a fresh screw is a five-minute job that keeps the head assembled the way SEBO built it. Because the screw comes in the pack there is no hunting for a fastener of the right length at reassembly. With the head open, the brush roller pulley 2458 and the inner roller bearing 2467 are both easy to check, and both are listed for this machine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2542\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack contents:\u003c\/strong\u003e the cover and its mounting screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart supplied:\u003c\/strong\u003e brush strip cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the cover is cracked, distorted, or the fixing has pulled through\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated 370 spares:\u003c\/strong\u003e 2458 pulley, 2467 roller bearing, 2522HG bumper, 2528OR foot pedal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO spare, authorized dealer stock, shipping in 2-5 business days. Searches for a SEBO 370 brush strip cover or an ELECTRONIC 370 bristle strip retainer both point at this number.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214517199098,"sku":"2542","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2542_49c4c5a0-1e31-4a57-aa0f-b5c77d7dc811.jpg?v=1785163570"},{"product_id":"protection-cover-for-suction-motor-for-370-series","title":"SEBO Suction Motor Protection Cover for 370 Comfort and Electronic 370","description":"\u003cp\u003eDown inside the base of a SEBO 370 Comfort or Electronic 370, the suction motor sits inside a shroud. Part 1821UL is that shroud, the protective cover shielding the motor body in its bay.\u003c\/p\u003e\u003cp\u003eTechnicians routinely find it torn, deformed or simply absent after an earlier motor swap, because it is the one component nobody misses when the machine is reassembled and switched on. Without it the motor runs unshielded, and anything that slips past the filtration has a clear route to the windings and to the cooling path around them. The shroud also keeps the motor's own carbon dust contained rather than letting it circulate through the base of the machine. Neither consequence announces itself immediately, which is exactly why a missing cover tends to be discovered years later during an unrelated repair.\u003c\/p\u003e\u003cp\u003eRefitting the correct part puts the barrier back where the design intends it, and costs a fraction of the motor it protects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e protective shroud for the suction motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommonly:\u003c\/strong\u003e missing or damaged after a previous motor replacement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1821UL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e rubber motor mount 1822 and suction motor 1843\/2, which is supplied complete with its own protection cover and a rubber support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit note:\u003c\/strong\u003e seat the shroud square over the motor body rather than pinched at one edge, and check nothing fouls the cooling path\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO through an authorized dealership, generally shipping in 2–5 business days. Disconnect the machine from the mains before opening the motor bay, and take the opportunity to check the rubber mount underneath the motor while everything is accessible — hardened mounts and missing shrouds tend to be found together, both dating from the same earlier repair. Seat the cover so it sits square over the motor body rather than pinched at one edge.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214524637434,"sku":"1821UL","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2769d75dd8f43dcd66c5c80ae20cd87a.jpg?v=1786669772"},{"product_id":"motor-cover-for-370-series","title":"SEBO Motor Cover for 370 COMFORT and ELECTRONIC 370","description":"\u003cp\u003eTwo different parts on a SEBO 370 get called the motor cover, and this is the outer one. Part 1853SE is the moulding that closes the motor compartment off from the outside of the machine on the 370 COMFORT and the ELECTRONIC 370. It is not the shroud wrapped directly around the motor itself, which is stocked separately as part 1821UL.\u003c\/p\u003e\u003cp\u003eIts job is half protection and half structure. Closed up, it seals the compartment against the dust and grit an upright runs over all day. It also gives the panels around it the reference edge that keeps the base of the machine square. Break a mounting tab or crack the face and both go at once: the bay lies open, the surrounding trim sits proud, and the vacuum develops a rattle that no amount of tightening will cure. Cracks generally start at a screw boss or along the edge that takes the impact when the machine is dropped onto its base.\u003c\/p\u003e\u003cp\u003eTelling the two covers apart before ordering saves a return. 1853SE is the panel visible from outside with the machine assembled, while 1821UL sits inside against the motor and only comes into view once this one is off. Both are listed for the 370 COMFORT and the ELECTRONIC 370. Where the complaint is noise rather than a visible crack, the insulation inside the bay is the more likely cause and the outer cover is probably doing its job perfectly well.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT and ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003eFunction: outer cover enclosing the motor compartment\u003c\/li\u003e\n\u003cli\u003eNot the same as: 1821UL, the motor protection shroud that sits against the motor\u003c\/li\u003e\n\u003cli\u003eReplace when: the cover is cracked, a fixing point has broken away, or the compartment no longer closes flush\u003c\/li\u003e\n\u003cli\u003ePart number: 1853SE\u003c\/li\u003e\n\u003cli\u003eRelated: 1851 suction motor sound insulation for the same compartment\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWith the bay open it is worth checking the insulation and the condition of the motor mount, since both are far easier to reach at this stage than to come back for later. Searches for a SEBO 370 motor cover, an ELECTRONIC 370 motor compartment cover or a 370 COMFORT motor housing replacement all land on this number. Genuine SEBO component, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214524702970,"sku":"1853SE","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/f1f05e13cd4f6e1acf20b991b6ea7935.jpg?v=1786669809"},{"product_id":"lens-for-bag-light-indicator-and-on-off-switch-cover-for-370-series-light-gray","title":"SEBO Lens for Bag Indicator and Switch Cover - 370 Series, Light Gray","description":"\u003cp\u003eThe light gray window on the control panel of a SEBO 370 is doing two jobs at once, and part 1869HG replaces it. It is the lens the bag indicator light shines through, and it is the cover sitting over the on\/off switch, supplied as a single moulding for the 370 COMFORT and the ELECTRONIC 370.\u003c\/p\u003e\u003cp\u003eBecause it shields the switch as well as carrying the indicator, damage here is more than cosmetic. A lens gone milky makes the bag warning hard to read at a glance, which defeats the point of having a warning. A lens that is missing altogether leaves the switch open to the dust an upright throws around, and grit in a switch is a slower and more serious problem than a scratched window. Fitting a fresh one gives a clear read on the indicator and closes the control panel back up as it should be.\u003c\/p\u003e\u003cp\u003eColour matters on this one. Light gray is the finish listed for the 370 COMFORT and the ELECTRONIC 370, and it is the attribute separating this lens from the other panel mouldings carrying the same function elsewhere in the SEBO range. The lens is not a structural part, so replacing it means releasing the cover rather than dismantling anything driven. Anyone searching for a SEBO 370 bag indicator lens, an on\/off switch cover or a 370 COMFORT lens replacement has found the right number.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT and ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003eCovers: the bag indicator light and the on\/off switch\u003c\/li\u003e\n\u003cli\u003eColour: light gray, matched to the 370 series trim\u003c\/li\u003e\n\u003cli\u003eReplace when: the lens is cloudy, scratched, cracked or missing, or the bag light is hard to see\u003c\/li\u003e\n\u003cli\u003ePart number: 1869HG, sold each\u003c\/li\u003e\n\u003cli\u003eRelated: 1852HG wand side cover supplied with lens and button, 1862 switch return spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFit it while the top housing is open for any other switch or board work rather than making a second trip in. Genuine SEBO part, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214528209146,"sku":"1869HG","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/ec0f0d5b63332565aadcfb78bd289eb9.jpg?v=1786669819"},{"product_id":"foot-pedal-for-370-electronic-orange","title":"SEBO Foot Pedal for the ELECTRONIC 370 - Orange","description":"\u003cp\u003eReclining an upright starts at the foot pedal, and on the SEBO ELECTRONIC 370 that pedal is part 2528OR in orange. It gets pressed with the side of a shoe dozens of times an hour in heavy use, which makes it one of the more predictable wear items on the machine.\u003c\/p\u003e\u003cp\u003eThe pedal releases the body so the machine can lie back for cleaning and stand up again for storage, and it has to do that with a shoe rather than a hand, which is why the contact face is generous and why it wears. Two failures are common. The stem snaps, usually at the point where it takes the leverage, and the pedal then flops without releasing anything. Or the contact face wears smooth and slightly dished, so a foot slides off it instead of pressing it, turning a one-second action into a fumble every time. A pedal that has gone loose in its mounting tends to take the parts around it with it as the load shifts off centre.\u003c\/p\u003e\u003cp\u003eA new one brings back a firm, predictable press underfoot. Orange is the specific finish for this number, so order by part number rather than by description if the machine has been repaired before. While working at that end of the machine, the bumper 2522HG and the brush strip cover 2542 are both worth a look.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2528OR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e orange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart supplied:\u003c\/strong\u003e foot pedal, sold singly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the pedal is cracked, worn slick, loose in its mounting, or no longer moves through its full travel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated 370 spares:\u003c\/strong\u003e 2522HG bumper, 2542 brush strip cover, 2524 and 2525 axles\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO spare from an authorized dealer; ships in 2-5 business days. This is the part behind searches for a SEBO 370 foot pedal or an ELECTRONIC 370 release pedal replacement.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214528602362,"sku":"2528OR","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/f9c62199bf973e37f02992f9fa7580c4.jpg?v=1786669977"},{"product_id":"handle-tube-for-370-series","title":"SEBO Handle Tube for 370 Comfort and Electronic 370","description":"\u003cp\u003eEvery push, pull and turn made with the machine travels up the tube running along its back. Part 1848 is that handle tube, supplied for the SEBO 370 Comfort and Electronic 370.\u003c\/p\u003e\u003cp\u003eBends and splits show up at the ends, where the fittings concentrate the leverage. A tube that has started to flex makes the upright feel vague to steer, and once a crack opens up, the grip and the wiring passing through it lose their anchor point. There is a second consequence that matters more: a cracked tube lets the internal lead move against a sharp edge every time the machine is reclined, and that is a reliable way to damage the cable as well. Renewing the tube restores the backbone the rest of the machine hangs off and takes the load off everything routed inside it.\u003c\/p\u003e\u003cp\u003eIt is a straightforward job to do, provided the cable is treated with respect on the way through.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e main handle tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarries:\u003c\/strong\u003e the grip, the controls and the internal wiring run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1848\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e carrying handle 1814HG, cord storage hook 1813HG and internal cable 1833UL, all listed for the same machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTesting the old tube is a matter of feel. Hold the machine by the grip and twist gently: a sound tube resists as one piece, while a cracked one gives a soft, delayed movement before it takes up. Searches for a SEBO 370 handle shaft, a 370 Comfort handle rod or an Electronic 370 handle tube all describe part 1848.\u003c\/p\u003e\u003cp\u003eGenuine SEBO from an authorized dealer, usually shipping in 2–5 business days. Unplug the vacuum first, ease the internal cable through the new tube rather than pulling it, and inspect the lead for chafe marks where the old tube had cracked — if the insulation has been rubbed, the cable wants replacing at the same time rather than being reinstalled and forgotten. Check the steering feel before the machine goes back into service.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214529192186,"sku":"1848","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/9fd5fe6a86b8831f67e8159f3015d310.jpg?v=1786669802"},{"product_id":"plastic-bearing-inside-for-370-electronic-and-et-c","title":"SEBO Inner Brush Roller Bearing for the ELECTRONIC 370 and ET-C Power Heads","description":"\u003cp\u003eA roller that turns stiffly by hand has a bearing problem, not a belt problem. Part 2467 is the inner plastic bearing that carries the brush roller inside the SEBO ELECTRONIC 370 and the SEBO ET-C power head.\u003c\/p\u003e\u003cp\u003eThe bearing sits at the roller end and lets the brush spin freely under the drive coming off the belt. Hair and fine grit work their way into the bore, the running clearance closes up, and the roller starts to drag. From that point the belt absorbs the extra load, stretches and glazes, and the motor runs hot for no gain in cleaning. Owners usually notice the symptoms rather than the cause: repeated belt failures, a roller that is noisy or notchy when spun by hand with the machine unplugged, and carpet that no longer looks groomed after a pass.\u003c\/p\u003e\u003cp\u003eRenewing the bearing is the small end of that repair. It frees the roller, takes the load back off the drive, and breaks the cycle of belts failing every few months. While the head is open, clear the wound hair from both roller ends, check the belt for glazing, and look at the pulley the belt runs on, which is listed for these same two machines as 2458. A worn pulley and a tight bearing produce very similar symptoms, so it is worth judging both before closing the head up.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2467\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO ELECTRONIC 370 and SEBO ET-C power heads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart supplied:\u003c\/strong\u003e inner brush roller bearing, plastic, sold singly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptoms:\u003c\/strong\u003e stiff or noisy roller rotation, repeated belt failures, poor agitation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhile the head is open:\u003c\/strong\u003e clear wound hair from the roller ends and check the belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion part:\u003c\/strong\u003e brush roller pulley 2458\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO spare from an authorized dealer; ships in 2-5 business days. Searches for a SEBO 370 roller bearing or an ET-C brush roller bushing both end at this number.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214530994426,"sku":"2467","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/4b7b702e2381f41e3bc2f6106d9e191f.jpg?v=1786669965"},{"product_id":"support-lever-with-spring-includes-2651-spring-for-370-series-light-gray","title":"SEBO Support Lever with Spring for the 370 COMFORT and ELECTRONIC 370 — Light Gray","description":"\u003cp\u003eLever and spring ship under one number here, so a single order covers both halves of the repair. Part 2653HG is the light gray support lever for the SEBO 370 COMFORT and the SEBO ELECTRONIC 370, and SEBO includes spring 2651 with it.\u003c\/p\u003e\u003cp\u003eThis is the catch that holds the upright in its parked position and releases it when you want to recline the machine to clean under furniture. It is worked every single time the vacuum is used, so it fails through fatigue rather than accident: the plastic cracks at the pivot where the load concentrates, or the return goes lazy and the body stops staying up on its own. Owners usually notice the second symptom first, as a machine that quietly leans away from them while they are moving furniture around.\u003c\/p\u003e\u003cp\u003eBecause the spring comes in the box, there is no second part to chase down afterwards and no temptation to reuse a tired spring behind a new lever. Fit it with the machine unplugged and laid over, and check the lever holds firmly at the parked position before the covers go back on.\u003c\/p\u003e\u003cp\u003eThe spring on its own, for a repair where the lever is sound, is 2651. Anyone searching for a SEBO 370 support lever, a light gray upright lock lever, or a 370 COMFORT lever and spring set is looking at this number.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 COMFORT and SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2653HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e supplied as a set with spring 2651\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the lever is cracked at the pivot or no longer holds the body upright\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 2651 support lever spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO spare from an authorized dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214532174074,"sku":"2653HG","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2653HG.jpg?v=1785152164"},{"product_id":"switch-lever-for-370-electronic","title":"SEBO Switch Lever for the ELECTRONIC 370","description":"\u003cp\u003eSwitching that has gone vague is worth tracing to the lever before anything electrical is suspected. Part 2605 is the switch lever for the SEBO ELECTRONIC 370, and it is the component your finger loads every time the machine is started or stopped.\u003c\/p\u003e\u003cp\u003eIts job is purely mechanical: it turns a press at the outside of the housing into a definite movement at the switch behind it. Levers wear at the pivot and fatigue along the arm, and either fault lets the travel go slack so the switch is no longer driven fully to one position or the other. What the owner sees is a vacuum that runs, then does not, depending on exactly where and how hard the control is pressed, and that is very easily mistaken for a failing board or a bad cord.\u003c\/p\u003e\u003cp\u003eA new lever brings back a firm, definite on and off action for a fraction of the work of an electrical repair. If the fault survives the change, the next two items to look at are the micro switch support 2624, which holds the switch square to whatever trips it, and the electronic controller 2572ER. Work the mechanism slowly by hand once the lever is in and listen for a clean click through the full travel before the covers go back on.\u003c\/p\u003e\u003cp\u003eThe lever is a moulded mechanical part rather than an electrical one, so nothing has to be disconnected to change it beyond gaining access to the housing. That makes it the natural first move on a SEBO ELECTRONIC 370 with an unreliable on and off action, and it is the part people are after when they search for a 370 ELECTRONIC switch lever replacement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2605\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e lever only, sold individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e switching that only works from certain angles or pressures\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores:\u003c\/strong\u003e a firm, definite on and off action\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 2624 micro switch support, 2572ER PCB electronic controller\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO spare from an authorized dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214532600058,"sku":"2605","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/56250d55b9587e5ace6317da9181a3ac.jpg?v=1786669988"},{"product_id":"locking-washer-10-pack-for-x1-x2-x4-x5-370-electronic-et-c-and-duo","title":"SEBO Locking Washer for AUTOMATIC X1, X2, X4, X5, ELECTRONIC 370, ET-C and Duo — 10 Pack","description":"\u003cp\u003eTen locking washers is roughly what a full brush-housing rebuild consumes, once you accept that none of the old ones should go back in. Part 0141ER is the ten-pack of the washer SEBO uses on the AUTOMATIC X uprights, the ELECTRONIC 370, the ET-C power heads and the Duo — identical to the single listed as 0141, bagged for anyone who opens these machines more than once.\u003c\/p\u003e\u003cp\u003eThese washers work by spring tension rather than friction. Compressed under a fastener head or a retaining collar, they push back and stop the fastener creeping round under the vibration that a running brush roll feeds into the chassis. That tension is a one-time asset. A washer removed from a machine has already given it up, and the flattened original going back in is why a repaired axle or bracket develops play again within weeks rather than years. Keeping a bag in the drawer also means the correct washer is at hand at the moment the machine is open, which is when the decision to reuse or replace actually gets made.\u003c\/p\u003e\u003cp\u003eBuying by the pack is what makes that discipline practical. A single upright strip-down turns up half a dozen of these at once, and a bag on the shelf removes the temptation to salvage. The usual prompts to order a SEBO locking washer replacement are a knocking brush-roll end, a cover screw found loose, or a collar that has started to walk along its shaft.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSEBO part 0141ER — locking washer, ten per pack\u003c\/li\u003e\n\u003cli\u003eFits SEBO AUTOMATIC X1, AUTOMATIC X2, AUTOMATIC X4, AUTOMATIC X4 Boost and AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003eAlso fits the ELECTRONIC 370, the ET-C power heads and the Duo\u003c\/li\u003e\n\u003cli\u003eSprung form; treat as a replace-on-assembly item rather than something to reuse\u003c\/li\u003e\n\u003cli\u003ePack: ten washers. Singles are stocked as 0141\u003c\/li\u003e\n\u003cli\u003eOther bagged hardware in the same group: flat washer 3.2 (0143ER), C clip (0161), screw 4 x 12 (0129ER)\u003c\/li\u003e\n\u003cli\u003eReplace when: a cover screw is found finger-loose, a bracket knocks, or a collar has started to walk along its shaft\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO part from an authorized dealer; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214533026042,"sku":"0141ER","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/d8880b3926ce6c1bf56c62f4b67319ee.jpg?v=1786667973"},{"product_id":"holder-for-front-cover-release-for-370-series-dark-gray","title":"SEBO Holder for Front Cover Release, 370 Comfort and Electronic 370 — Dark Gray","description":"\u003cp\u003eOrdered alongside the release itself as often as not, part 1819 is the dark gray seat that the front cover release pivots in on the SEBO 370 Comfort and Electronic 370. It is the mount, not the lever.\u003c\/p\u003e\u003cp\u003eWhen the seat splits, a perfectly serviceable release wanders out of alignment and the catch either misses its keeper altogether or binds halfway through the stroke. That is why the two parts are so often confused: the symptom presents at the lever, but the cause is behind it. Fitting a sound holder gives the mechanism a rigid pivot again and takes the guesswork out of which of the two components actually failed. A useful check before ordering is to press the release and watch the moulding around it — any flex or rocking as the lever moves means the seat is the problem.\u003c\/p\u003e\u003cp\u003eColour is dark gray, matching the release it carries rather than the lighter body panels around it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e mounting seat for the front cover release lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 Comfort and Electronic 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePairs with:\u003c\/strong\u003e front cover release 1818GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1819\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part:\u003c\/strong\u003e complete front cover 1846HG for the same machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBecause the two parts fail together so often, ordering the release and its seat at the same time is usually the pragmatic call. The job is short with both in hand and considerably longer if the second failure is discovered after the front of the machine has already gone back together. Searches for a SEBO 370 cover release seat or an Electronic 370 latch mount point here.\u003c\/p\u003e\u003cp\u003eGenuine SEBO through our authorized dealership, usually moving in 2–5 business days. Check the release arm for stress whitening while the assembly is apart, since a holder rarely fails without having loaded the lever unevenly for some time beforehand. Anyone searching for a SEBO 370 cover release mount or a 370 Comfort latch holder has found the correct part.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214533222650,"sku":"1819","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/e84c8cf1c84373bcf8f35543d99bc368.jpg?v=1786669767"},{"product_id":"valve-fitting-pcb-to-bag-housing-for-370-series","title":"SEBO Valve Fitting, PCB to Bag Housing - 370 COMFORT and ELECTRONIC 370","description":"\u003cp\u003eBetween the circuit board and the bag housing on a SEBO 370 sits a small moulded fitting that makes the connection at that junction, and part 1860 is it. It is one of the components that only becomes visible once the top of the machine is apart, which is precisely why it tends to get overlooked.\u003c\/p\u003e\u003cp\u003eFittings of this kind are easy to snap during a strip-down and easy to leave out on reassembly. Broken or absent, the joint between the board and the bag housing sits loose, and anything depending on a tight connection at that point stops behaving predictably from then on. It is a small thing to renew while the machine is already open and a genuinely irritating one to have to go back in for. If the circuit board and switch assembly is being changed, or any work is happening around the bag compartment, this belongs on the same order.\u003c\/p\u003e\u003cp\u003eIdentifying it is far easier with the machine open than from a picture, since it is a small moulding tucked into the junction rather than anything visible from outside. It is listed for the 370 COMFORT and the ELECTRONIC 370 alike, with no colour or handed option to choose between. Ordering two is not unreasonable on a machine that has been apart before, because a fitting already disturbed once rarely survives a second strip-down intact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT and ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003eLocation: where the bag housing meets the circuit board area, under the top of the machine\u003c\/li\u003e\n\u003cli\u003eReplace when: the original is cracked, distorted, or missing after previous work\u003c\/li\u003e\n\u003cli\u003ePart number: 1860, sold singly\u003c\/li\u003e\n\u003cli\u003eRelated 370 service items: 1935ER circuit board with switch, 20115 wire tie for the 370 COMFORT, 1862 switch return spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDoing the whole area in one visit rather than two is the point here, since the fitting, the tie that dresses the loom and the board itself all live under the same panels. Anyone searching for a SEBO 370 valve fitting, a bag housing connector or a 370 COMFORT circuit board fitting has arrived at the right part. Genuine SEBO component, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214533255418,"sku":"1860","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/e5ee5fca1b6b07d2fd8cef5edc7e8f0f.jpg?v=1786669811"},{"product_id":"brush-roller-with-pulley-and-brush-strip-for-370-comfort","title":"SEBO Brush Roller with Pulley and Brush Strip for the 370 COMFORT","description":"\u003cp\u003eCarpet that looks groomed but never quite comes clean is usually a brush problem rather than a suction problem. Part 4098ER is the complete brush roller for the SEBO 370 COMFORT, supplied with its drive pulley and its brush strip already fitted, so one order covers the whole rotating assembly instead of three separate components and an afternoon spent building them up.\u003c\/p\u003e\u003cp\u003eBristles shorten as they sweep. Once they no longer reach into the pile the roller keeps turning without agitating anything, and the machine relies on airflow alone to lift soil that airflow was never meant to lift on its own. Hair and thread wound around the core make it worse by adding drag, which loads the belt and shortens its life as well. The quick check is to lay a straight edge across the roller: if the bristles sit flush with the housing line rather than standing proud of it, the roller has done its work. Clear the old one of wound hair before the replacement goes in so the new bearings are not fighting a dirty mounting from day one.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSEBO part number:\u003c\/strong\u003e 4098ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 COMFORT upright\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComes with:\u003c\/strong\u003e drive pulley and brush strip installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e bristles are short, splayed, or no longer touch the carpet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e as one complete roller assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 2046 brush roller strip, 20118ER brush strip cover, 20136ER bearings, 20117ER right-hand bearing block, 2923 belt\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf the roller is being replaced because it stalls rather than because it is worn, look at the belt and at brush motor 2973ER with its carbon brush set 05141S before assuming the roller is at fault. Genuine SEBO from an authorized dealer; searches for a SEBO 370 COMFORT brush roller, a 370 roller brush replacement or the number 4098ER end here, and orders ship in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214533976314,"sku":"4098ER","price":51.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/4098ER.jpg?v=1785153362"},{"product_id":"screw-sts-4-x-20-t20-single-for-felix-and-e-series-dart-and-370-comfort","title":"SEBO Screw STS 4 x 20 (T20 Torx) for FELIX, E Series, DART and 370 COMFORT","description":"\u003cp\u003eFour millimetres across and twenty long, this is the deeper of the two T20 body screws, used where a fastener passes through a thick section before it finds its boss. SEBO specifies it for the FELIX and E series, the DART and the 370 COMFORT, and supplies it individually as part 1017. The six-lobe T20 recess is the same one used across the rest of the modern SEBO range, so a single bit covers the whole strip-down.\u003c\/p\u003e\u003cp\u003eSubstituting the 16 mm version is a common shortcut and a poor one. The shorter screw engages only the top few threads, then works loose under vibration and brings the plastic with it when it finally pulls out. What starts as one loose fastener ends as a torn boss and a housing that will no longer hold anything at that point. Part 1017 puts the correct length back into the joint.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1017\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO FELIX and E series machines, the DART and the 370 COMFORT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e T20 Torx\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 4 mm diameter, 20 mm long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e STS body screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShorter versions:\u003c\/strong\u003e part 1016 at 16 mm and part 1036 at 13 mm, same 4 mm Torx family\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eReplace one when the recess has rounded, when the screw no longer holds torque, or when a strip-down has left you one short. Drive it home firmly but stop the moment the head seats, since over-torquing into plastic is exactly what creates the next stripped hole and the next set of loose panels around it.\u003c\/p\u003e\u003cp\u003eKeep the screws from a machine laid out in the order they were removed. Lengths are mixed within a single casing on these models, and the T20 head gives no clue as to which hole a screw came from once it has left it. Two minutes of order at the start of a job saves a good deal of trial and error at the end of one.\u003c\/p\u003e\u003cp\u003eUseful search phrasing for this one includes SEBO FELIX screw replacement, SEBO 370 COMFORT body screw, SEBO E series Torx fastener and genuine SEBO STS 4 x 20. Genuine SEBO fastener supplied by an authorized dealer, shipping in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214535352570,"sku":"1017","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/01017.jpg?v=1709348821"},{"product_id":"screw-f-3-9-x-13-din-7981-single-for-x-g-370-300-350-c-d-et-c-et-h-and-disco","title":"SEBO Screw F 3.9 x 13 (DIN 7981) for X, G, 370, 300\/350, C and D Series, ET-C, ET-H and DISCO","description":"\u003cp\u003eFew fasteners turn up on as many SEBO machines as this one. The F 3.9 x 13 to DIN 7981 is listed for the X and G ranges, the 370, the 300 and 350, the C and D series, the ET-C and ET-H power heads and the DISCO, which makes it the screw worth keeping two of in the drawer before anything goes wrong. DIN 7981 gives it a cross-recessed pan head on a self-tapping thread, so it drives straight into a moulded boss and needs nothing behind the joint.\u003c\/p\u003e\u003cp\u003eIt measures 3.9 mm across the thread and 13 mm under the head, and it does the ordinary work of holding covers, brackets and cable clamps where they belong. When one strips, the panel it held starts to lift at a corner and rattle over hard floors, and the fasteners either side of it then carry a load they were never sized for. Catching that early keeps the repair down to a single screw.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 102\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO X, G and 370 ranges, the 300 and 350, the C and D series, the ET-C and ET-H power heads, and the DISCO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e F 3.9 x 13 to DIN 7981\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead and drive:\u003c\/strong\u003e cross-recessed pan head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3.9 mm diameter, 13 mm long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonger 3.9 mm DIN 7981 screws:\u003c\/strong\u003e part 103 at 16 mm, part 105 at 19 mm and part 104 at 25 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless equivalent size:\u003c\/strong\u003e part 106, a 3.9 x 13 to DIN 7981-A2\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOrder as many as the repair needs, since these are supplied individually rather than in a packet. Tighten to firm hand pressure only. The thread is cut in plastic and will not take a torque setting meant for metal, and the fastest way to turn a five-minute job into a housing replacement is to lean on the driver at the end of the stroke.\u003c\/p\u003e\u003cp\u003eThis is the part behind searches for a SEBO 3.9 x 13 screw, a SEBO ET-C power head screw, a DIN 7981 vacuum fastener or a genuine SEBO 102. Genuine SEBO hardware from an authorized dealer, out the door in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214535385338,"sku":"102","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/aa285c530dafcd95021896a7b3c1109b.jpg?v=1786670996"},{"product_id":"screw-c-3-9-x-16-din-7981-single-for-x-series-felix-series-g-series-370-series-et-c-and-duo","title":"SEBO Screw C 3.9 x 16 (DIN 7981) for X, FELIX, G and 370 Series, ET-C and DUO","description":"\u003cp\u003eStep up from the 2.9 mm screws and you reach the 3.9 mm size, used where a joint carries load rather than simply holding a cover shut. SEBO lists the C 3.9 x 16 to DIN 7981 across the X, FELIX and G series machines, the 370 series, the ET-C power head and the DUO, and supplies it individually as part 103. The DIN 7981 form is a cross-recessed pan head on a self-tapping thread.\u003c\/p\u003e\u003cp\u003eA loose screw in a load-bearing position does not stay a small problem. The hole elongates as the joint works, the moulding flexes at every push of the machine, and the crack that follows turns a fastener job into a housing job. The early warning is a panel that has begun to move under hand pressure at one corner, long before anything is audible.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 103\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO X, FELIX and G series machines, the 370 series, the ET-C power head and the DUO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e C 3.9 x 16 to DIN 7981\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead and drive:\u003c\/strong\u003e cross-recessed pan head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3.9 mm diameter, 16 mm long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther lengths in the same family:\u003c\/strong\u003e part 102 at 13 mm, part 105 at 19 mm and part 104 at 25 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTighten to firm hand pressure only, since the thread is cut in plastic and will not take a torque setting meant for metal. If the replacement spins without pulling down, the boss rather than the screw has failed, and moving up to a longer screw only splits the moulding further along.\u003c\/p\u003e\u003cp\u003eThis is the fastener behind searches for a SEBO FELIX chassis screw, a SEBO 370 series body screw, a DIN 7981 3.9 x 16 replacement or a genuine SEBO 103. Take a moment to match the length against the one you removed, because all four screws in this family carry the same head. Genuine SEBO part from an authorized dealer, dispatched in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214535549178,"sku":"103","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0103.jpg?v=1709348785"},{"product_id":"screw-4-x-13-tx-20-single-for-x7-x8-g4-g5-dart-softcase-370-comfort-300-350-d-e","title":"SEBO Screw 4 x 13 (Tx 20) for X7\/X8, G4\/G5, DART, SOFTCASE, 370 COMFORT, 300\/350, D and E Series","description":"\u003cp\u003eSitting below the 16 and 20 mm Torx screws, the 4 x 13 with a Tx 20 recess is the short one, and its fitment list runs right across the SEBO line: the X7 and X8, the G4 and G5, the DART, the SOFTCASE, the 370 COMFORT, the 300 and 350, and the D and E series. Part 1036 is the single-screw order for all of them.\u003c\/p\u003e\u003cp\u003eThe six-lobe Torx recess is what makes these screws survive repeated servicing, since the driver load is carried around a large contact area rather than on two thin cross flutes. That advantage disappears once the recess has begun to round. Anywhere a machine has been apart more than once the Torx screws are worth inspecting, because one that still drives today will slip at the worst possible moment during the next service, and extracting a spun screw from a plastic boss takes far longer than replacing it early.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1036\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO X7 and X8, G4 and G5, DART, SOFTCASE, 370 COMFORT, 300 and 350, D and E series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Tx 20, six-lobe recess\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 4 mm diameter, 13 mm long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonger screws, same drive:\u003c\/strong\u003e part 1016 at 16 mm and part 1017 at 20 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch the length before ordering, as the 16 mm and 20 mm screws carry the same head and the same drive and cannot be told from this one at a glance. Use a genuine T20 bit rather than an approximate substitute, and stop driving the moment the head seats rather than leaning into the last quarter turn.\u003c\/p\u003e\u003cp\u003eBecause one screw covers so much of the range, this is the sensible one to keep spares of. A single T20 bit and a few of these cover a brush roll change, a filter housing strip and a hose cuff swap across most of the modern SEBO uprights and canisters listed above, and none of those jobs is improved by discovering halfway through that a fastener has given up.\u003c\/p\u003e\u003cp\u003eSearches that lead here include SEBO G5 body screw, SEBO X8 Torx screw, SEBO 370 COMFORT casing fastener and genuine SEBO 4 x 13 Tx 20. Genuine SEBO fastener from an authorized dealer, shipping in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214535614714,"sku":"1036","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/01036.jpg?v=1709348824"}],"url":"https:\/\/evacuumsandmore.com\/collections\/sebo-370.oembed?page=4","provider":"Vacuums and More","version":"1.0","type":"link"}