{"title":"Sebo C3.1","description":null,"products":[{"product_id":"axle-for-swivel-neck-supports-for-et-1-and-et-2","title":"SEBO Swivel Neck Support Axle for ET-1 and ET-2 Power Heads","description":"\u003cp\u003eEvery change of direction is absorbed by the neck joint between wand and power head. Part 2928 is the axle the swivel neck supports turn on, drawn at position 126 on SEBO's ET-1\/ET-2, DART and FELIX parts sheets, sitting one number along from the neck switch wiring that runs through the same joint.\u003c\/p\u003e\u003cp\u003eWear here is felt rather than seen. The head starts to lag behind the handle, flops at the end of a stroke, or refuses to follow into a turn at all. The right and left supports the shaft passes through are listed separately as 2311 and 2312 at positions 123 and 124, and they wear in step with it, so put a thumb on both and check for play while the joint is open. If the swivel also feels notchy rather than merely loose, the six-piece metal segment set 2950ER and the swivel neck bearing 2954 are the next two items on the same sheet worth inspecting. Disconnect the machine from the outlet before disturbing anything that carries power down into the head.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2928, supplied singly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ET-1 and ET-2 power heads, switched and unswitched\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e FELIX Premium, FELIX 2 Premium, DART, C3.1, AIRBELT D4 PREMIUM, AIRBELT E3 Premium and AIRBELT K3 PREMIUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e pivot shaft carrying the swivel neck supports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 126 on the ET-1\/ET-2, DART and FELIX lists\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 2311 support right, 2312 support left, 2954 swivel neck bearing, 2950ER metal segment set, 2307GS complete swivel neck\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical symptom:\u003c\/strong\u003e a head that wanders, flops or fights the line you are steering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA SEBO ET-1 axle replacement is a bench job rather than a roadside one, but it is the quickest way to bring the steering back to where it was, and always worth doing while the neck is apart for any other reason. Genuine SEBO stock from an authorized dealer; ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472339706,"sku":"2928","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2928.jpg?v=1709347663"},{"product_id":"bearing-block-l-h-complete-for-et-1-and-et-2-gray-black","title":"SEBO Left-Hand Bearing Block for ET-1 and ET-2 Power Heads — Gray Black","description":"\u003cp\u003ePosition 102 on SEBO's exploded views marks the left-hand brush roll bearing, and 2314GS is that component in gray black, assembled and ready to seat. The same position number applies across the ET 1 \/ ET 2 power head, DART and FELIX diagrams, so whichever sheet you are working from the reference holds.\u003c\/p\u003e\u003cp\u003eLeft and right blocks are not interchangeable and carry separate part numbers, so identify which end has gone noisy before ordering. Grinding under load, a roll that will not turn freely by hand, or visible play when you rock the roll in its seat all point at the bearing rather than the belt. The distinction matters because a slipping belt and a failed bearing can both leave a head that cleans poorly on carpet, yet the fix and the part are entirely different. With the roll out, spin each bearing on its own: a healthy one runs on smoothly for a few seconds, a failed one feels notchy or stops immediately, and a housing that has worn oval will let the whole bearing turn in its seat.\u003c\/p\u003e\u003cp\u003eBecause both ends accumulate identical hours, pairing this with the right-hand block, part 2313GS, avoids taking the head apart twice. Clear wound hair and thread from the roll shaft before reassembly, since that binding is what loads the bearings in the first place, and check the belt runs central on its pulley once everything is back together. Light gray ET-1 heads use the colour-matched block 2314HG instead of this one.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits the SEBO FELIX Premium, FELIX 2 Premium, DART, C3.1, AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium\u003c\/li\u003e\n\u003cli\u003eSuits ET-1 as well as ET-2 power heads, switched or unswitched\u003c\/li\u003e\n\u003cli\u003ePart number: 2314GS\u003c\/li\u003e\n\u003cli\u003eLeft-hand brush roll bearing block, supplied complete with the bearing seated\u003c\/li\u003e\n\u003cli\u003eFinish: gray black\u003c\/li\u003e\n\u003cli\u003eDiagram position: 102 in the ET 1 \/ ET 2, DART and FELIX parts lists\u003c\/li\u003e\n\u003cli\u003eRelated numbers: 2313GS right-hand block, 2314HG in light gray\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO part. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472962298,"sku":"2314GS","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2314GS.jpg?v=1785150350"},{"product_id":"bearing-block-r-h-complete-for-et-1-and-et-2-gray-black","title":"SEBO Right-Hand Bearing Block for ET-1 and ET-2 Power Heads — Gray Black","description":"\u003cp\u003eA brush roll that squeals at one end, wanders sideways, or takes a moment to come up to speed has usually lost a bearing. Part 2313GS is the right-hand half of that pair in the gray black finish, and it ships complete, so the bearing already sits in its housing and the repair is a swap rather than a press-fit rebuild on the bench.\u003c\/p\u003e\u003cp\u003eSEBO draws this piece at position 105 in the ET 1 \/ ET 2 power head diagram, and at position 105 again in the DART and FELIX diagrams. The failure has a recognisable arc. First comes a rise in running noise that tracks brush speed rather than motor speed, then the belt begins creeping toward one end of its pulley, and finally the roll develops enough play to be rocked visibly in its seat by hand. Left long enough, an out-of-square roll wears its own end cap and starts scrubbing the carpet harder on one side of the opening than the other.\u003c\/p\u003e\u003cp\u003eLook over the opposite end while the roll is out. The left-hand block, part 2314GS in the same finish, carries identical hours and tends to wear on much the same schedule, and doing both at once avoids a second strip-down. Clear wound hair from the roll shaft before reassembly, since that binding loads the bearings every time the head runs. Light gray ET-1 heads take block 2313HG instead, so order by the finish on the head in front of you. Fitment on this gray black block runs across both head widths, which is why one number covers uprights and canisters alike.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits the SEBO FELIX Premium, FELIX 2 Premium, DART, C3.1, AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium\u003c\/li\u003e\n\u003cli\u003eSuits ET-1 as well as ET-2 power heads, switched or unswitched\u003c\/li\u003e\n\u003cli\u003ePart number: 2313GS\u003c\/li\u003e\n\u003cli\u003eRight-hand brush roll bearing block, supplied complete with the bearing seated\u003c\/li\u003e\n\u003cli\u003eFinish: gray black\u003c\/li\u003e\n\u003cli\u003eDiagram position: 105 in the ET 1 \/ ET 2, DART and FELIX parts lists\u003c\/li\u003e\n\u003cli\u003eRelated numbers: 2314GS left-hand block, 2313HG in light gray\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO part. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473552122,"sku":"2313GS","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2313GS_74be7a83-888a-4bc1-812f-9e2c64caf642.jpg?v=1785153960"},{"product_id":"rear-bottom-plate-for-et-1-gray-black","title":"SEBO Rear Bottom Plate for ET-1 Power Heads — Gray Black","description":"\u003cp\u003eDebris left behind on the pull stroke usually points at the panel behind the roll rather than at suction. Part 2304GS is the gray black rear bottom plate used on ET-1 floor nozzles, closing off the rear of the underside and setting the height at which the trailing lip meets the floor.\u003c\/p\u003e\u003cp\u003eSEBO catalogues it at position 109 in three separate diagrams, the ET 1 \/ ET 2 power head list, the DART list and the FELIX list, each time as the complete rear bottom plate. Scraping, cracking and warping all open a gap along that edge, and a gap there bleeds air away from the roll where the airflow is meant to be doing its work. The symptoms read as a general loss of pickup on carpet, a thin line of grit left behind the head, or a nozzle that feels light and skittish instead of settling onto the floor. Hard flooring and threshold strips do most of the damage, since the plate takes the load every time the head is dragged backwards over a raised edge.\u003c\/p\u003e\u003cp\u003eTurn the head over and sight along the rear lip before ordering. A plate worn thin, missing a corner or bowed away from the shell is doing none of its job, and no amount of bag or filter changing will bring the pickup back while it stays there. The same panel covers a wide spread of machines, since the SEBO FELIX Premium, DART and C3.1 uprights and the AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium canisters all run ET-1 heads. This is the gray black version; light gray heads take part 2304HG instead.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits the SEBO FELIX Premium, DART, C3.1, AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium\u003c\/li\u003e\n\u003cli\u003eSuits ET-1 power heads built with or without an on\/off rocker\u003c\/li\u003e\n\u003cli\u003ePart number: 2304GS\u003c\/li\u003e\n\u003cli\u003eColour: gray black\u003c\/li\u003e\n\u003cli\u003eDiagram position: 109 in the ET 1 \/ ET 2, DART and FELIX parts lists\u003c\/li\u003e\n\u003cli\u003eSupplied complete\u003c\/li\u003e\n\u003cli\u003eRelated number: 2304HG in light gray\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShips in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214476042490,"sku":"2304GS","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2304GS.jpg?v=1708929320"},{"product_id":"foam-bumper-for-c-series","title":"SEBO Foam Bumper for C1.1, C2.1 and C3.1 Canisters","description":"\u003cp\u003eEvery canister towed around a house collects the same history: a door casing here, a table leg there. The foam bumper stands between those knocks and the shell, and SEBO lists the section for the C-series body as 6046UL. It is shaped foam, and it swallows the impact rather than handing it on to the plastic underneath or to the furniture.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6046UL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, SEBO C2.1 and SEBO C3.1 canister vacuums\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e moulded foam section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e softens impacts against walls, door casings and furniture\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenew it when:\u003c\/strong\u003e the foam has flattened, torn at an end, or come away from its mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate part number:\u003c\/strong\u003e 6623UL is a different bumper listing and does not fit in its place\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated body trim:\u003c\/strong\u003e AIRBELT textile 6047AM01, castor 6095DG, bottom casing 6197DG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFoam does not recover from years under compression. It sets hard, splits where the section is thinnest, or peels back until only one end is still attached. From that point the canister starts leaving marks on baseboards and picking up scuffs along its own nose, and a machine dragged around the same house for a decade wears every one of them. None of it affects how the vacuum cleans, which is exactly why the bumper is left until last and why the damage it was meant to prevent has usually already happened.\u003c\/p\u003e\u003cp\u003eFitting takes minutes and needs nothing beyond something to clean the seat with. People find this listing searching for a SEBO foam bumper, a C2.1 bumper replacement, or a SEBO canister front bumper. Genuine SEBO part held by an authorized dealership, dispatched in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214477287674,"sku":"6046UL","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/6046UL_c6190a56-b0bc-44f3-88aa-2e54385eddd9.jpg?v=1785145024"},{"product_id":"bumper-for-et-1-gray-black","title":"SEBO ET-1 Power Head Bumper — Gray Black","description":"\u003cp\u003eBaseboards, chair legs and door frames all take their turn against the front of a floor nozzle, and gray black bumper 2302GS is the trim that absorbs the punishment on ET-1 heads. It wraps the leading edge so the housing behind it never makes the contact, and it is the reason a well-kept head still looks straight after years of edge work.\u003c\/p\u003e\u003cp\u003eSEBO lists this moulding at position 101 in the DART parts diagram as the complete bumper. Trim hardens with age rather than with mileage, and the failure is predictable: it splits at a corner, works loose from its retaining channel, then lifts far enough to snag on the very furniture it exists to protect. Once that happens the marks start appearing on skirting boards and on the shell underneath. A strip that has gone rigid enough to rattle in its groove is worth changing before it takes a chip out of the housing. Replacement is a front-edge job with the head laid on its back; clear the channel of grit before pressing the new moulding home, and work from one corner across rather than pushing the middle down first.\u003c\/p\u003e\u003cp\u003eFitment runs wide on this one. The same trim serves the SEBO FELIX Premium, the DART, the C3.1 and the AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium canisters, all of which use an ET-1 head, and it suits those heads whether or not they carry an on\/off rocker. Colour is the ordering decision: this is the gray black item, the light gray equivalent is part 2302HG, and the version bundled with the soft carpet front bottom plate is 2302SC.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits the SEBO FELIX Premium, DART, C3.1, AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium\u003c\/li\u003e\n\u003cli\u003eSuits ET-1 power heads built with or without an on\/off rocker\u003c\/li\u003e\n\u003cli\u003ePart number: 2302GS\u003c\/li\u003e\n\u003cli\u003eColour: gray black\u003c\/li\u003e\n\u003cli\u003eDiagram position: 101, DART parts list\u003c\/li\u003e\n\u003cli\u003eSupplied complete\u003c\/li\u003e\n\u003cli\u003eRelated numbers: 2302HG in light gray, 2302SC with the soft carpet front bottom plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShips in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214477943034,"sku":"2302GS","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2302GS_48b2cc77-88a3-4513-8cea-1ba56a2b36ba.jpg?v=1785139706"},{"product_id":"bumper-with-soft-carpet-front-bottom-plate-for-et-1-gray-black","title":"SEBO ET-1 Bumper with Soft Carpet Front Bottom Plate — Gray Black","description":"\u003cp\u003eTwo components in a single order: SKU 2302SC pairs the gray black ET-1 bumper with the soft carpet front bottom plate, the front sole piece SEBO supplies for soft, deep-pile flooring. Ordering them together keeps the leading edge of the head matched above and below rather than mixing a new strip against a scarred plate.\u003c\/p\u003e\u003cp\u003eThe two parts do separate jobs on the same edge. Below the line, the front plate governs how the nozzle enters the pile, and the soft carpet version is shaped to stop the head burying itself and gripping on plush flooring where a standard plate would seal down and make the machine heavy to push. Above the line, the bumper takes the impacts from furniture and skirting so the housing never has to. Damage to either is worth addressing as a pair, because both sit on the same leading edge and both shape how the head behaves at the start of every stroke.\u003c\/p\u003e\u003cp\u003eAnyone who has changed flooring to a softer pile tends to want this combination rather than the standard front plate, and it is also the sensible order when a head has been dropped on its nose and both pieces are scarred. Fitment covers the SEBO FELIX Premium, the DART, the C3.1 and the AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium, in each case on ET-1 heads built with or without an on\/off rocker. If the front plate is still sound, the bumper alone is part 2302GS in gray black or 2302HG in light gray.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits the SEBO FELIX Premium, DART, C3.1, AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium\u003c\/li\u003e\n\u003cli\u003eSuits ET-1 power heads built with or without an on\/off rocker\u003c\/li\u003e\n\u003cli\u003ePart number: 2302SC\u003c\/li\u003e\n\u003cli\u003ePack contents: the bumper plus the soft carpet front bottom plate\u003c\/li\u003e\n\u003cli\u003eColour: gray black\u003c\/li\u003e\n\u003cli\u003eRelated numbers: 2302GS bumper only, 2302HG light gray bumper\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO parts. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214478041338,"sku":"2302SC","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2302SC_7a9958c8-823c-4dd6-8ee8-9a30ebe0f469.jpg?v=1785137376"},{"product_id":"on-off-pedal-for-c3-1-red","title":"SEBO On\/Off Foot Pedal for C3.1 Canister — Red","description":"\u003cp\u003eEvery start and stop on a C3.1 goes through the foot control moulded into the top of the body, and 6005DR is that control in red.\u003c\/p\u003e\u003cp\u003ePress once and the motor runs, press again and it shuts down. All of that force lands on a slim hinge point in the plastic, which is why this pedal ages faster than almost anything else on the canister. The reports are consistent: it feels spongy underfoot, it settles below the level of the trim around it, or the motor wants a second stamp before it picks up. None of that necessarily means the switch beneath has failed, and changing the moulding first is the sensible order of work — a healthy switch behind a broken pedal reads exactly like a dead switch.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6005DR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e red, matched to the red C3.1 bodywork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C3.1 canister vacuum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e foot-operated power control on the canister body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame pedal in white:\u003c\/strong\u003e 6005GW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not confuse with:\u003c\/strong\u003e 6309DR, a separate on\/off pedal listing for the earlier C bodies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe other pedal on the machine:\u003c\/strong\u003e cord rewind 6006DR, also in red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching red C3.1 trim:\u003c\/strong\u003e top casing 6397DR, attachment cover 6383C3\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTwo pedals sit within an inch of each other on this machine and they are not interchangeable, so check which one you are actually standing on before ordering: the power control runs the motor, while the second releases the cord reel. Searches that land on this page tend to read SEBO on off pedal, C3.1 power pedal replacement, or red SEBO foot pedal. Take the plug out of the wall before you begin, note which way round the old moulding sits in its aperture, and wipe the seat clean so the new pedal drops in square. Genuine SEBO part supplied by an authorized dealership, dispatched in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214478205178,"sku":"6005DR","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/a573bee46f79b18b04589caf7adb94fa.jpg?v=1786670628"},{"product_id":"on-off-pedal-for-c3-1-white","title":"SEBO On\/Off Foot Pedal for C3.1 Canister — White","description":"\u003cp\u003eA white canister gets a white power pedal, which is why SEBO catalogues 6005GW alongside the darker moulding instead of asking a pale machine to wear the wrong colour.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6005GW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C3.1 canister vacuum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e the foot control that starts and stops the motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame pedal in red:\u003c\/strong\u003e 6005DR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifferent numbers on the earlier C bodies:\u003c\/strong\u003e 6309DR and 6309TK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCord rewind pedal in white:\u003c\/strong\u003e 6006GW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther white C3.1 trim:\u003c\/strong\u003e microfilter holder 6003GW, bag cover 6093GW, top casing 6397GW, bottom casing 6197GW\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMechanically the pedal is a lever: it takes the weight of your foot and delivers it to the switch mechanism sitting under the panel, and the moulded hinge is where age shows first. Three complaints cover almost every replacement. The pedal has stiffened and no longer springs back level. It has sunk below the trim around it, so the toe finds an edge instead of a face. Or it has lost its definite click, and the machine now needs a second stamp before the motor picks up. In each case the switch underneath is often perfectly sound, and changing the moulding is both the quicker diagnosis and the sensible first move.\u003c\/p\u003e\u003cp\u003eWhite plastic gives one advantage here: a hairline split shows up long before the pedal starts misbehaving, so a machine can be caught early. Fitting takes a screwdriver and a few minutes. Unplug the canister, note how the old pedal sits in its aperture as it comes away, brush any grit out of the recess and press the new one in until it lies flush with the panel. Shoppers arrive here searching for a SEBO on off pedal, a white C3.1 power pedal, or a SEBO canister foot switch replacement. Genuine SEBO part in the factory white finish, dispatched in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214478270714,"sku":"6005GW","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/8b676e7066e008fd58b258b29774e9d2.jpg?v=1786670633"},{"product_id":"release-button-for-c-series-dark-gray","title":"SEBO Release Button in Dark Gray for C1.1, C2.1 and C3.1","description":"\u003cp\u003ePress it and the catch lets go — that is the whole job of SEBO part 6083DG, the dark gray release button used across the C-series canisters. It sits in its recess in the housing, travels a short distance under thumb pressure, and returns under its own spring load.\u003c\/p\u003e\u003cp\u003eButtons fail quietly. The plastic stem cracks, the return grows lazy, and the catch either refuses to open or stops locking properly, which makes routine servicing an irritation. A replacement restores a short, clean throw and a definite click. Behind the button sits a foam pad, SEBO 6128, that flattens with age and is worth renewing at the same time — a new button on a collapsed pad still feels vague.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, C2.1 and C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark gray, matching the original housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e operates the latch release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e one button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6083DG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit alongside:\u003c\/strong\u003e foam seal 6128, cover release with seal 6036DG, bearing cover 6039\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTwo symptoms send people looking for a SEBO C series release button: a cover that will not let go however hard it is pressed, and one that no longer stays shut once closed. Both point at this part or the small group around it, and all four numbers above come apart in the same short job.\u003c\/p\u003e\u003cp\u003eThe rest of the release group is catalogued in the same dark gray family and comes apart in one sitting: 6036DG is the cover release with its seal, 6039 the bearing cover that carries it, 6027ER the pin with screw and washer, and 6045 the spring behind the attachment cover. Working through them together is far quicker than chasing one loose catch at a time.\u003c\/p\u003e\u003cp\u003eGenuine SEBO stock supplied by an authorized SEBO dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214478565626,"sku":"6083DG","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/619fa87422494cf156fc7a4c200105d0.jpg?v=1786670542"},{"product_id":"cover-release-with-seal-for-c-series-dark-gray","title":"SEBO Cover Release with Seal for C1.1, C2.1 and C3.1 Canisters — Dark Gray","description":"\u003cp\u003eLatch and gasket arrive as one assembly under 6036DG: the C-series cover release in dark gray, with its seal already fitted.\u003c\/p\u003e\u003cp\u003eThe release holds the compartment cover down; the seal makes that closure airtight once it is down. Both do their work on every bag change, so they age at the same pace and tend to give up in company — a catch that no longer pulls the cover tight, alongside rubber that has gone hard and stayed compressed. The result is a lid sitting a fraction proud and letting air into the machine at a point where the bag should be doing the filtering, which shows up as reduced draw at the nozzle and sometimes as dust on the outside of the housing. Selling the two as one piece means a new latch always closes onto new sealing material instead of onto whatever is left of the old.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6036DG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, SEBO C2.1 and SEBO C3.1 canister vacuums\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e cover release with the seal fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing cap at its pivot:\u003c\/strong\u003e 6039\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts on the same machines:\u003c\/strong\u003e release button 6083DG, bag holder 6094\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChange it when:\u003c\/strong\u003e the cover creeps open in use, sits proud, or the catch has lost its bite\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWith the assembly out, check the cap over the pivot as well. A release that felt sloppy before the swap will feel no better afterwards if the bearing behind it is the part that actually broke, and that cap is a separate number. Searches that reach this page include SEBO cover release, C2.1 latch with seal, and SEBO canister lid catch replacement. Genuine SEBO part, dispatched in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214479384826,"sku":"6036DG","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5702023e7dbb7f024b4062e640ef7561.jpg?v=1786670531"},{"product_id":"pile-adjustment-knob-for-et-1-and-et-2-gray-black","title":"SEBO Pile Adjustment Knob for ET-1 and ET-2 Power Heads \u0026mdash; Gray Black","description":"\u003cp\u003eCarpet height on an ET-1 or ET-2 power head is chosen with a single control, and 2931GS is it in gray black. SEBO shows the knob at position 110 on the ET-1\/ET-2 sheet, where the DART list files the same position under pile adjustment button. Turning it steps the brush roll up or down so the bristles meet plush, medium or low carpet at a sensible depth instead of skating over the fibers or stalling in them.\u003c\/p\u003e\u003cp\u003eKnobs catch on furniture legs and split at the hub long before the mechanism underneath gives out. A cracked hub turns without driving the shaft below it, which strands the head on whatever setting it was last left on, and a knob that has gone missing altogether leaves nothing to grip. Fitting a new one restores indexed selection without opening the rest of the adjustment group. If the detents themselves feel mushy rather than the knob feeling loose, look past this part to the spring at 106, part 2929, and to the complete pile adjustment assembly at 107, sold as 2316GS in gray black.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2931GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e gray black, matching the darker head trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ET-1 and ET-2 power heads, switched and unswitched\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e FELIX Premium, FELIX 2 Premium, DART, C3.1, AIRBELT D4 PREMIUM, AIRBELT E3 Premium and AIRBELT K3 PREMIUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 110 on the ET-1\/ET-2 sheet, and 110 on the DART list as the pile adjustment button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther finishes:\u003c\/strong\u003e 2931HG in light gray, 2931SB in silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 2316GS adjustment assembly, 2929 spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOrder by finish rather than by feel: gray black, light gray and silver knobs share the same fitting but look plainly different on the head. Genuine SEBO part from an authorized dealer, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214480597242,"sku":"2931GS","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0733ea0293158c3f0fa21738f6b746bf.jpg?v=1786668905"},{"product_id":"release-button-with-leaf-spring-for-et-1-et-2-et-c-et-h-and-disco-swivel-necks-gray-black","title":"SEBO Swivel Neck Release Button with Leaf Spring — Gray Black","description":"\u003cp\u003ePress the neck release and get nothing back — no click, no spring, no release — and the flat spring behind the button has almost certainly cracked. Part 1737GS pairs the gray black button with a fresh leaf spring, so the mechanism is rebuilt rather than patched.\u003c\/p\u003e\u003cp\u003eThe button lives in the swivel neck, the pivoting joint where a power head or floor tool locks onto the machine. Pushing it flexes the leaf spring and withdraws the locking tab; letting go lets the spring drive the tab back into its keeper. Once that spring loses its tension or breaks, the fault shows up in one of two ways. Either the button sinks in and stays down, so the head will not release without a fight, or there is no resistance under the thumb at all and the joint no longer locks, which is felt as a neck that rocks and wanders while the machine is steered. Packed hair and grit in the button recess mimic both symptoms, so it is worth clearing the recess and trying again before condemning the part.\u003c\/p\u003e\u003cp\u003eSEBO draws it at position 117 on both the DART and the FELIX sheets, described on the FELIX drawing as the gray black release button. Button and spring wear as a pair, which is why supplying one without the other would leave half the repair undone.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits machines:\u003c\/strong\u003e SEBO FELIX Premium, FELIX 2 Premium, DART, AIRBELT D4 PREMIUM, AIRBELT E3 Premium, AIRBELT K3 PREMIUM and C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits power heads:\u003c\/strong\u003e ET-1 Power Heads (with switch), ET-1 Power Heads (without switch), ET-2 Power Heads (with switch), ET-2 Power Heads (without switch) and ET-C Power Heads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso fits:\u003c\/strong\u003e the DISCO Floor Polisher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e button plus leaf spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 117 on the DART and FELIX drawings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1737GS — order 1737HG for the light gray finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part:\u003c\/strong\u003e gray black release button cap 1738GS for ET-C power heads\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO through an authorized dealership, typically shipping in 2–5 business days. Clear hair and grit from the recess first, seat the new spring squarely in its channel, then work the release half a dozen times and confirm the neck locks solidly before the machine goes back to work.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214484070650,"sku":"1737GS","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1737GS_b7de5bdb-e63c-4d5a-9b38-aa778abcb519.jpg?v=1785150955"},{"product_id":"mains-cable-for-d4-e3-k3-and-c3-1-gray-black","title":"SEBO Mains Cable for AIRBELT D4, E3, K3 and C3.1 (Gray Black)","description":"\u003cp\u003ePower reaching the machine intermittently — cutting out as the cord is flexed near the body — points straight at the mains cable. SKU 6369G2 is SEBO's gray-black replacement for the AIRBELT D4 Premium, AIRBELT E3 Premium, AIRBELT K3 Premium and the C3.1.\u003c\/p\u003e\u003cp\u003eDamage usually starts where the cord bends most, at the strain relief. Treat it as urgent rather than something to live with, since a conductor that has broken inside its jacket is an electrical hazard and not merely an inconvenience. The factory cable restores steady power to the vacuum and to any powered nozzle running from it.\u003c\/p\u003e\u003cp\u003eThe cable is one link in a chain, and knowing the rest of it saves ordering the wrong part twice. At the machine end it terminates in the cord rewind unit, which SEBO numbers separately for each platform — 665613E, 665633ER and 665603E — and from there the internal wiring carries current to the board and on to the motor. A machine that is completely dead with a cable testing good sends you to those parts next. Where the plug passes out through the shell it is trimmed by a plug surround, listed as 6622GS in gray black on the K platform and 6007DG in dark gray on the C.\u003c\/p\u003e\u003cp\u003eOne thing this cable is not is a cord set you can substitute from another machine. SEBO specifies it by finish as well as by fitment, and the gray-black jacket is what matches the AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium bodies along with the C3.1. Order by the part number and the job is a straight replacement rather than a compromise.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 6369G2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e AIRBELT D4 Premium, AIRBELT E3 Premium, AIRBELT K3 Premium and C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e power flickers, the jacket is nicked or crushed, or the plug feels warm in use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e one cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWork on the cable only with the machine unplugged, and hand the job to a service technician if you are not confident with mains wiring. Genuine SEBO part, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214485938426,"sku":"6369G2","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2e69c81fc6ebd8038740b017a5826ace.jpg?v=1786670169"},{"product_id":"internal-cable-cord-reel-to-pcb-for-c-series","title":"SEBO Cord Reel to Circuit Board Internal Cable for the C Series","description":"\u003cp\u003eMains power reaches the C-series control board through a short internal lead, and 6291 is that lead. It runs between the cord reel contacts and the machine's circuit board, carrying the whole current draw across a length of harness that flexes each time the cord winds in. SEBO lists it for the C1.1, the C2.1 and the C3.1.\u003c\/p\u003e\u003cp\u003eConductors fatigue where they bend and terminals loosen where they carry load, which is how a canister develops an intermittent start, drops out when the cord is tugged, or refuses to wake at all. The tell-tale is a machine whose behaviour changes when the cord is pulled out to a different length, because that is the cable moving. Renewing this lead rules out one of the more common electrical faults in an older machine before anyone starts pricing a control board. Unplug it before opening anything.\u003c\/p\u003e\u003cp\u003eFollow the current and the neighbours become obvious. The trim around the plug is 6007DG; from the reel the supply crosses this cable and reaches the electronic controller, ordered separately as 6295ER or 6407ER depending on the machine, before it drives the motor, which is 6165. While the cover is off, check the reel contacts for burning and look at the rewind side too: the pedal spring there is 6023 and the panel that closes over both the motor bay and the reel is 6192, sealed to the bottom casing by 6186. This page answers searches for a SEBO internal cable, a C series cord reel wiring harness, and a genuine SEBO canister vacuum that will not start.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6291, internal power cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, C2.1 and C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e links the cord reel to the circuit board and carries the full current draw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptoms:\u003c\/strong\u003e intermittent starting, power dropping out when the cord is moved, no response at all\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhile you are in there:\u003c\/strong\u003e inspect the reel contacts for burning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e genuine SEBO cable, ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214488068346,"sku":"6291","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/bb4a18ca331511ce7e049c763e7416c9.jpg?v=1786670597"},{"product_id":"bottom-casing-for-red-and-teal-c3-1-c2-1-and-c1-1-dark-gray","title":"SEBO Bottom Casing for C1.1, C2.1 and C3.1 Canisters — Dark Gray","description":"\u003cp\u003eDark gray lower shells belong to the red and teal C-series canisters, and 6197DG is the replacement for that shell. It forms the underside of the machine: the piece carrying the internal assemblies, taking the weight, and sliding across the ground while the canister is towed behind you. SEBO lists it for the C1.1, the C2.1 and the C3.1.\u003c\/p\u003e\u003cp\u003eCasings crack where they meet stairs, thresholds and furniture legs. Once split, the mounting points inside lose their alignment and air can pass where the two body halves should meet, so a damaged base costs suction as well as strength. A new one gives the internals a straight, sound foundation again. This is a full strip-and-rebuild job, so allow time or hand it to a technician.\u003c\/p\u003e\u003cp\u003eEverything that bolts to or rides on this shell is ordered separately, and the dark gray parts are the ones that match it: the complete castor 6095DG, the rear parking holder 6008DG, the side parking holder 6009DG, the plug surround 6007DG and the microfilter holder 6003DG. The foam bumper that protects the perimeter is 6046UL. Rebuild it with fresh seals too — 6186 closes the motor and cord reel cover down onto this casing, and the foam seals are 6213 at the front and 6120\/3 at the rear. All of those carry the same C1.1, C2.1 and C3.1 fitment. Top casings are ordered by machine and colour under their own numbers, and the white lower shell is 6197GW.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6197DG, bottom casing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark gray, the shell used under the red and teal machines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, C2.1 and C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e lower body shell carrying the internal components and the floor contact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuild with:\u003c\/strong\u003e 6186 seal, 6213 and 6120\/3 foam seals, 6046UL foam bumper, 6095DG castor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther colour:\u003c\/strong\u003e 6197GW covers the white shell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e genuine SEBO part, authorized dealer stock, ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCommon searches are SEBO C series bottom casing, SEBO canister lower shell in dark gray, and genuine SEBO housing replacement.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214496325882,"sku":"6197DG","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/858c34946494400c97e2565f3579f59e.jpg?v=1786670592"},{"product_id":"bottom-casing-for-c3-1-white","title":"SEBO C3.1 Bottom Casing in White","description":"\u003cp\u003eWhite C3.1 canisters take a matching white lower shell, and 6197GW is it. The casing forms the base of the machine, holding the motor bay, cord reel and wiring in their correct positions and providing the surface that meets the floor.\u003c\/p\u003e\u003cp\u003eDamage here usually follows a fall or years of being dragged across thresholds. Cracks around the mounting bosses let internal parts shift, a warped base stops the two body halves closing cleanly, and a joint that no longer pulls tight leaks air where the machine can least afford it. A fresh casing gives everything inside a true foundation to bolt back onto. Plan on a full rebuild rather than a quick swap, since every internal assembly has to come across to the new shell.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6197GW, bottom casing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e base shell that locates the internal assemblies and rides on the floor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching white parts:\u003c\/strong\u003e 6397GW top casing, 6093GW bag cover, 6215SE attachment cover, 6005GW on\/off pedal, 6006GW rewind pedal, 6003GW microfilter holder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther colour:\u003c\/strong\u003e 6197DG for the dark gray shell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e genuine SEBO part, ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBecause this is the white shell specifically, it belongs to a colour-matched family. The white top casing is 6397GW, the complete white bag cover is 6093GW, the white attachment cover is 6215SE, the white on\/off pedal is 6005GW, the white cable rewind pedal is 6006GW and the white microfilter holder is 6003GW — every one of them listed for this machine alone. The suction neck is 6318UL. If the shell you are replacing is dark gray rather than white, order 6197DG instead; the mouldings are catalogued separately by finish and the two are not swapped freely. Searches that end here include SEBO C3.1 bottom casing white, SEBO canister base shell replacement, and genuine SEBO C3.1 housing.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214496456954,"sku":"6197GW","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3f369a13ba5c048cae2416a3372012f8.jpg?v=1786670637"},{"product_id":"parking-holder-rear-for-c-series-dark-gray","title":"SEBO Rear Parking Holder for C1.1, C2.1 and C3.1 Canisters — Dark Gray","description":"\u003cp\u003eA C-series canister offers two places to hang a floor tool, and each is a separate moulding. Part 6008DG is the rear one, in dark gray.\u003c\/p\u003e\u003cp\u003eStand the machine on end and this catch accepts the hook on the floor nozzle, so wand and tool hang down the back of the body rather than sprawling across the carpet. It carries that load every time the vacuum is parked between rooms or lifted up a staircase, and the tab rounds off with the repetition. Once it has worn round or snapped away, the tool lets go the moment it is left alone, and a nozzle on the end of a full-length wand travels far enough to find paintwork, skirting, or the shin of whoever walked past. Owners usually describe the fault as a wand that will not stay put rather than as a broken part.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6008DG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e rear parking point on the canister body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, SEBO C2.1 and SEBO C3.1 canister vacuums\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe other parking point:\u003c\/strong\u003e side holder 6009DG, a different moulding again\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools it parks:\u003c\/strong\u003e floor brushes such as 6391AM on the telescopic tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenew it when:\u003c\/strong\u003e the tab is rounded, split, or no longer holds the nozzle at rest\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitting is straightforward, and the side holder is worth examining while you have the machine on the bench — both take the same handling and they rarely wear at different rates. People look for this as a SEBO parking clip, a C3.1 wand holder, or a SEBO rear tool holder replacement. Quote 6008DG for the rear position and 6009DG for the side, because the two are described almost identically and only the number tells them apart. Genuine SEBO part, dispatched in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214499602682,"sku":"6008DG","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/f4b5c43171e1d71de84e375397270a1b.jpg?v=1786670514"},{"product_id":"parking-holder-side-for-c-series-dark-gray","title":"SEBO Side Parking Holder for C1.1, C2.1 and C3.1 Canisters — Dark Gray","description":"\u003cp\u003e6009DG is the dark gray moulding on the flank of a SEBO C1.1, C2.1 or C3.1 that accepts the hook on the back of the floor nozzle, so the tool rides with the machine when it is carried, set down or pulled between rooms.\u003c\/p\u003e\u003cp\u003eFailure creeps up on this part. The jaws of the catch spread by a fraction each year until the hook begins to slide out unaided, and eventually the nozzle will not stay put at all. It then swings loose against the shell, leaving marks on the canister and on whatever furniture it passes. A holder that has been loaded with the tube still attached often shows a stress line at the root of the catch, and that line is the signal to change it rather than wait for the tool to drop mid-job. A new moulding restores the original grip.\u003c\/p\u003e\u003cp\u003eThere are two parking positions on these canisters and they are used in turn, so they age at roughly the same rate. The rear point takes its own moulding, 6008DG, and a machine that has worn one has usually tired the other. The two are not interchangeable, so quote the number for the position you want rather than describing where the nozzle hangs.\u003c\/p\u003e\u003cp\u003eNothing about fitting one is difficult, and no tools are required beyond what it takes to reach the mounting. What matters more is buying the right position: the side and rear holders are different mouldings that will not substitute for one another.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber\u003c\/strong\u003e — 6009DG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachines\u003c\/strong\u003e — SEBO C1.1, C2.1, C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour\u003c\/strong\u003e — dark gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation\u003c\/strong\u003e — side of the canister body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded\u003c\/strong\u003e — one moulding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear position\u003c\/strong\u003e — 6008DG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther dark gray parts\u003c\/strong\u003e — microfilter holder 6003DG, bottom casing 6197DG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCommon searches for this component include SEBO side parking clip, C1.1 tool holder replacement and SEBO canister nozzle holder in dark gray. Supplied as a genuine SEBO part by an authorized dealership, with 2–5 business days for delivery.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214499700986,"sku":"6009DG","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/58261aff123faeedaf866d1e77aadb5d.jpg?v=1786670517"},{"product_id":"power-head-cover-for-et-1-red","title":"SEBO ET-1 Power Head Cover — Red","description":"\u003cp\u003eRed ET-1 heads take this upper shell, ordered as 2326DR. It is the moulded lid that closes over the belt, pulley and wiring run inside the nozzle, and it is what gives the head its finished colour.\u003c\/p\u003e\u003cp\u003eCovers tend to fail mechanically long before anything underneath them does. A locating tab snaps and the shell stops sitting flush, a screw boss splits so the fastener no longer pulls it down, or an edge scuffs through after enough contact with baseboards. None of that stops the head cleaning straight away, but a cover that no longer closes properly lets hair and grit reach the drive components it was there to keep clean, and a loose shell rattles at speed. The other common reason to order one is cosmetic, on a machine that works perfectly but has taken a knock somewhere visible.\u003c\/p\u003e\u003cp\u003eFitment covers ET-1 power heads with or without the on\/off rocker, and SEBO also lists this cover against the AIRBELT E3 Premium, AIRBELT K3 PREMIUM and C3.1. Colour is the ordering decision, so match the shade against your own head before buying rather than relying on a photograph; the graphite gray black shell for the same head is part 2326GSET. Check that every locating tab engages before running the screws down, because forcing a cover that is not seated is what breaks the next one. With the shell off it is worth clearing hair from around the pulley and checking the belt, since neither will be this accessible again until the cover comes off a second time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits SEBO ET-1 power heads, with or without the on\/off rocker\u003c\/li\u003e\n\u003cli\u003eAlso listed by SEBO for the AIRBELT E3 Premium, AIRBELT K3 PREMIUM and C3.1\u003c\/li\u003e\n\u003cli\u003ePart number: 2326DR\u003c\/li\u003e\n\u003cli\u003eColour: red\u003c\/li\u003e\n\u003cli\u003eUpper cover with no printed model name\u003c\/li\u003e\n\u003cli\u003eEncloses the belt, pulley and internal wiring run\u003c\/li\u003e\n\u003cli\u003eSupplied as the upper shell alone\u003c\/li\u003e\n\u003cli\u003eRelated number: 2326GSET in graphite gray black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO part. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214501601530,"sku":"2326DR","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/615a6b1c4352dec68e7422e95e280bdd.jpg?v=1786670296"},{"product_id":"power-head-cover-for-et-1-white","title":"SEBO ET-1 Power Head Cover - White","description":"\u003cp\u003eOf all the white ET-1 shells SEBO lists, 2326WEET is the one with the broadest fitment, and it is the plain version, molded with no printed model name across the top. Matching a broken cover means getting the shade and the fitment right in the same order, and this number settles both for a wide spread of machines.\u003c\/p\u003e\u003cp\u003eThe shell carries the clip points and screw bosses for the whole nozzle, so it is doing structural work rather than simply looking tidy. Once one has cracked, the head stops closing square, dust starts finding its way onto the belt, and the split keeps travelling under vibration until the top no longer seats. SEBO calls the cover out at position 135 in its ET 1 \/ ET 2 power head diagram, a drawing that covers two head families on one sheet, so treat the sheet title as the name of a diagram and let the part number decide the fitment. With the head open for the swap, check the belt tension and how much bristle is left on the strip before closing everything back up, since neither is easy to reach again afterwards.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2326WEET\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e white, plain, no print applied\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO ET-1 power heads, with or without the switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed by SEBO for:\u003c\/strong\u003e AIRBELT D4 PREMIUM, AIRBELT E3 Premium, AIRBELT K3 PREMIUM and C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 135, ET 1 \/ ET 2 power head sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e the bare shell, sold individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included:\u003c\/strong\u003e belt, brush roller, switch or fixings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinted white alternatives:\u003c\/strong\u003e 2331WEAM and 2331WESE, each carrying a printed model name on the face\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther plain shells:\u003c\/strong\u003e 2326SWET in black, 2326VOET in orange\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf the machine in front of you is an AIRBELT E3 Premium or a C3.1 and the white nozzle top has split, this is the SEBO ET-1 power head cover replacement to order. The printed white shells look near identical in a photograph but are different part numbers, so buy against the number rather than the picture. SEBO catalogs its small hardware separately as well, listing screw 3.9 x 16 as 0103 singly and 0103ER in a ten pack, with locking washers as 0141 and 0141ER, which is useful when the original fixings come out chewed. Genuine SEBO part; ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214501765370,"sku":"2326WEET","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/8deba25920f50ebcfba973250653d87e_f77373ec-0e91-45b4-ac85-3de882651380.jpg?v=1786670163"},{"product_id":"access-door-with-axle-and-spring-for-et-1-and-et-2-orange","title":"SEBO Access Door with Axle and Spring for ET-1 and ET-2 Power Heads \u0026mdash; Orange","description":"\u003cp\u003eET-1 and ET-2 power heads pass this hinged door on to every machine built around them, which is why one orange component covers so much of the SEBO range. Part 2909VO ships complete with its axle and spring, and SEBO puts it at position 108 on the ET-1\/ET-2, DART and FELIX parts sheets alike.\u003c\/p\u003e\u003cp\u003eThe door is what gets opened for belt and brush access, so its hinge sees more cycles than almost anything else on the head. As the spring slackens or the axle wears its bore oval, the door stops sitting flush: it hangs open a few millimetres, drags on carpet as the head is pulled back, rattles over hard floors, and eventually breaks at the pivot where the plastic has been working. Fitting the assembled part restores the pivot and the closing tension in one go, with no hardware to transfer across from a broken door and nothing to line up by hand.\u003c\/p\u003e\u003cp\u003eFull fitment runs to the SEBO ET-1 and ET-2 power heads in both the with-switch and without-switch versions, the FELIX Premium and FELIX 2 Premium, the DART, the AIRBELT D4 PREMIUM, the AIRBELT E3 Premium, the AIRBELT K3 PREMIUM and the C3.1. Behind the same door sit the parts most often replaced with it: toothed belt 2923, axle 2928, spring 2929 and orange foot pedal assembly 2937OR. Roller sizes split by head — the 12 inch 5010AM covers the ET-1 heads, FELIX Premium, DART, AIRBELT D4 PREMIUM, AIRBELT E3 Premium, AIRBELT K3 PREMIUM and C3.1, while the ET-2 heads and the FELIX 2 Premium take the 15 inch 2838AM. Searches for a SEBO access door with its axle and spring fitted, an ET-1 belt door or a FELIX brush access door land here.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSEBO part 2909VO — hinged access door, axle and spring included\u003c\/li\u003e\n\u003cli\u003eFits: SEBO ET-1 and ET-2 power heads (with or without switch), FELIX Premium, FELIX 2 Premium, DART, AIRBELT D4 PREMIUM, AIRBELT E3 Premium, AIRBELT K3 PREMIUM and C3.1\u003c\/li\u003e\n\u003cli\u003eColor: orange\u003c\/li\u003e\n\u003cli\u003eParts-diagram position: 108 on the ET-1\/ET-2, DART and FELIX sheets\u003c\/li\u003e\n\u003cli\u003eTypical symptom: a door that will not latch flush, drags on carpet, or has snapped at the hinge\u003c\/li\u003e\n\u003cli\u003eRelated part numbers: 2923 belt, 2928 axle, 2929 spring, 2937OR foot pedal with axle and spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine SEBO\u003c\/strong\u003e; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214507041018,"sku":"2909VO","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2909VO_bbb0cc33-49e9-460f-8834-32029ed2e7b1.jpg?v=1785150214"},{"product_id":"chassis-for-et-1-gray-black","title":"SEBO ET-1 Power Head Chassis — Gray Black","description":"\u003cp\u003eEverything inside an ET-1 head bolts to the chassis: motor, roll bearings, wheels and the height linkage all take their alignment from it. Part 2324GS is that frame in gray black, supplied as the frame alone so the original internals move across into it.\u003c\/p\u003e\u003cp\u003eA split screw boss or a frame twisted by a hard fall puts the roll out of parallel with the floor, and no set of new bearings will correct that. The symptoms are the ones that survive every other repair: a head that still runs noisy after fresh bearing blocks, a belt that keeps tracking off despite a new pulley, uneven bristle wear across the strip, or a wheel mount that no longer holds its position. Stairs account for most of the damage, followed by heads that have been leaned on while the machine was parked upright. SEBO shows the ET-1 chassis as position 100 in the DART diagram.\u003c\/p\u003e\u003cp\u003eAllow proper time for the transfer and keep fasteners grouped by where they came from, because the same screw is not always used at every location. Inspect the bearing blocks, the belt and the pulley while the internals are out, since all three are far easier to reach with the frame stripped than they will ever be again. Fitment covers the SEBO FELIX Premium, DART and C3.1 uprights and the AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium canisters. Light gray heads take chassis 2324HG.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits the SEBO FELIX Premium, DART, C3.1, AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium\u003c\/li\u003e\n\u003cli\u003eSuits ET-1 power heads built with or without an on\/off rocker\u003c\/li\u003e\n\u003cli\u003ePart number: 2324GS\u003c\/li\u003e\n\u003cli\u003eColour: gray black\u003c\/li\u003e\n\u003cli\u003eDiagram position: 100, DART parts list\u003c\/li\u003e\n\u003cli\u003eSupplied as the bare frame; original internals transfer across\u003c\/li\u003e\n\u003cli\u003eRelated number: 2324HG in light gray\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO part. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214508777722,"sku":"2324GS","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/298c2e475930d6a048e10c3c4addee01.jpg?v=1786668867"},{"product_id":"airbelt-clip-for-c-and-k-series-gray-black","title":"SEBO AIRBELT Clip in Gray Black for K and C Series","description":"\u003cp\u003eA single clip is all that holds the end of a tensioned AIRBELT band in place, and 6048GS is that clip in gray black. SEBO shows it at position 31 on the AIRBELT K diagram, anchoring the fabric collar to the canister so the band stays stretched flat rather than bunching at one end.\u003c\/p\u003e\u003cp\u003eClips are the first casualty when the band gets pulled hard. One broken anchor is enough for the textile to lift away from the body, so replacing the clip on its own is often a five-minute job that saves an otherwise good band. If the fabric has gone as well, new clips arrive with every AIRBELT textile: 6047AM01, 6047AM07 and 6047AM12 are all packed with 6048GS and 8034GS.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AIRBELT K2 Kombi, K2 Turbo and K3 Premium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso fits:\u003c\/strong\u003e SEBO C1.1, C2.1 and C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e one clip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 31 on the AIRBELT K parts sheet, beside the casing clip at 28\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6048GS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBecause it is shared right across those canisters, this is the anchor to order whether the machine is a K2 Kombi or a C3.1 — the fabric pattern changes between models, the clip does not. Do not confuse it with the casing clip that closes the shell seam, which is a different item sold as 6086HG singly or 6086ER in threes.\u003c\/p\u003e\u003cp\u003eSEBO draws its exploded views by canister family, so the AIRBELT K sheet is where this clip is illustrated even though the C1.1, C2.1 and C3.1 use it too. Ordering by the number rather than by the drawing avoids the confusion: 6048GS is the same gray black anchor on every one of those machines.\u003c\/p\u003e\u003cp\u003eFitting is a matter of unhooking the tired clip, easing the band back under tension and snapping the new one home. Genuine SEBO hardware from an authorized SEBO dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214510973178,"sku":"6048GS","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/a8b0a8436b0bfef6bc451edf794bcf4d.jpg?v=1786670373"},{"product_id":"attachment-clip-set-of-3-for-c-series","title":"SEBO Attachment Clips for C1.1, C2.1 and C3.1 — Set of 3","description":"\u003cp\u003eThe crevice nozzle and dusting brush ride on board the machine rather than being carried loose, and small sprung clips are what keep them there. SEBO packs three of them as part 6117ER for the C-series canisters.\u003c\/p\u003e\u003cp\u003eEach clip is flexed open every time a tool comes out and snapped shut again when it goes back, so the arms lose their grip long before anything looks broken. The symptom is a tool that drops off mid-clean and surfaces under the sofa a week later. Renewing all three together means the surviving originals do not fail a month behind the first.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, C2.1 and C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e retains the on-board cleaning tools\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e three clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6117ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolds tools such as:\u003c\/strong\u003e crevice nozzle 1092GS and upholstery nozzle 1491GS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe clips live under the attachment cover, a colour-matched panel with its own number — 6215SE on the white machine, 6383AM in red, and 6382AM or 6380AM in teal green — and the spring that returns that cover is 6045. If the cover flaps open rather than the tools falling out, the fault sits there instead of here.\u003c\/p\u003e\u003cp\u003eWhich tools travel on board varies with how the machine was specified, but the usual pair is a crevice nozzle and a dusting brush: 1092GS and 1094GS are the numbers, with the upholstery nozzle 1491GS often making a third. A clip that has lost its spring will let any of them go at the first stair.\u003c\/p\u003e\u003cp\u003eFitting needs no tools: the tired clip lifts out of its slot and the new one presses in until it seats. Anyone searching for SEBO attachment clips, a C series tool clip or a C3.1 accessory holder is describing the same small failure. Genuine SEBO hardware from an authorized SEBO dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214511104250,"sku":"6117ER","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/4ae8c11c96d2f09899515abc0653e4e8.jpg?v=1786670554"},{"product_id":"casing-clip-set-of-3-for-k-and-c-series","title":"SEBO Casing Clips for AIRBELT K and C Series — Set of 3","description":"\u003cp\u003eThree casing clips come in this pack, SEBO part 6086ER, sized for the AIRBELT K and C-series bodies. Each clip draws the shell halves together at one fixed point along the seam so the canister stays shut, stays aligned, and stays free of the rattles a loose joint produces.\u003c\/p\u003e\u003cp\u003eClips are stressed every time the machine is opened for service, and they rarely fail one at a time — a technician who has cracked one usually finds its neighbours close behind. Buying the set means the whole seam can be brought back to an even clamp in a single visit. SEBO sells the identical clip on its own as 6086HG, which is the leaner order when only one position has let go.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AIRBELT K2 Kombi, K2 Turbo and K3 Premium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso fits:\u003c\/strong\u003e SEBO C1.1, C2.1 and C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e three clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e the same clip is drawn at 28 on SEBO's AIRBELT K sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-clip version:\u003c\/strong\u003e 6086HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6086ER\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOther hardware on that seam is easy to renew while the body is open. The spring lock is 6042WS and the seal between the suction neck and the bottom casing is 6014, both shared across the same canisters. On the C machines the M4 x 12 ISO 7380 screws are catalogued as 0199 singly and 0199ER in tens.\u003c\/p\u003e\u003cp\u003eNo tools are needed to change them. Each clip lifts out of its slot, and the moulded lug it grips is worth a glance before the new one goes on — a chipped lug will chew through a fresh clip in a season. Press each replacement home until it snaps, then check the seam closes with even pressure along its whole length.\u003c\/p\u003e\u003cp\u003eAnyone searching for SEBO casing clips, a K series body clip or a C3.1 shell clip is normally looking at a gaping seam or a body that creaks under the hand. Genuine SEBO hardware from an authorized SEBO dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214511399162,"sku":"6086ER","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/edaf4863ff6ef4afd5bdf077c17f652e.jpg?v=1786670378"},{"product_id":"back-cover-ts-neck-for-et-1-et-2-felix-except-white-and-disco-gray-black","title":"SEBO Back Cover for the TS-Neck \u0026mdash; FELIX, ET-1, ET-2 and DISCO, Gray Black","description":"\u003cp\u003eBehind the TS-neck joint sits a molded panel that caps the back of the head. Part 2947GS is that panel in gray black, shaped to the housing contour and drilled for the original screws, so the head goes back together without packing or shimming anything into place.\u003c\/p\u003e\u003cp\u003eSEBO's power head diagram numbers the cover 115, and the FELIX sheet uses the same number, immediately after the swivel neck wiring at 114 and just before the metal segment set at 116. Panels crack where they get gripped during a wand change, or when the head is tipped hard against a stair nose. Once broken, the opening lets dust reach the neck hardware and the joint loses some of its stiffness, so the head feels less planted underfoot. Replacing the cover is a screwdriver job with the head on the bench, and it is the right moment to look at the segments and slide inside the same joint.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2947GS, TS-neck back cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ET-1 and ET-2 power heads, switched and unswitched, and the DISCO floor polisher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e FELIX Premium, FELIX 2 Premium, C3.1, AIRBELT D4 PREMIUM, AIRBELT E3 Premium and AIRBELT K3 PREMIUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 115 on the power head and FELIX sheets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther finish:\u003c\/strong\u003e light gray panel 2947HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 0876ER swivel neck wiring at 114, 2950ER segment set at 116, 2945GS slide at 119\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting tip:\u003c\/strong\u003e photograph the screw layout before the old panel comes off\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA genuine SEBO TS-neck cover keeps the dust out of the joint it protects, which is the whole reason to fit the correct moulding rather than tape over a split. Factory SEBO part supplied by an authorized dealer, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214514970874,"sku":"2947GS","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0ef463bbc1139d200d413b609783f585.jpg?v=1786668920"},{"product_id":"attachment-cover-for-c3-1-white","title":"SEBO C3.1 Attachment Compartment Cover in White","description":"\u003cp\u003eOnboard tools on a C3.1 live behind a hinged panel, and 6215SE is the white cover that closes it. The panel keeps stored attachments in their compartment, hides them from view, and completes the top line of the machine.\u003c\/p\u003e\u003cp\u003eThese covers get handled every time a tool is needed, so broken hinge lugs and snapped catches are the usual reasons for ordering one. A cover that no longer latches lets accessories rattle loose while the canister is towed along behind you, and a missing one leaves the tools free to fall out on stairs. The replacement clips into place without further disassembly. If the panel is intact but simply flops open, the spring behind it is a separate item, listed as 6045, and the clips that hold the tools themselves come as a set of three under 6117ER.\u003c\/p\u003e\u003cp\u003eColour is the thing to get right here. This is the white cover; the red C3.1 takes 6383C3 instead. White is also the finish of the matching C3.1 mouldings around it — top casing 6397GW, bottom casing 6197GW, bag cover 6093GW, on\/off pedal 6005GW, cable rewind pedal 6006GW and microfilter holder 6003GW — so a machine being tidied up cosmetically can be brought back to one consistent shade using those numbers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6215SE, attachment compartment cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e retains the onboard cleaning tools in their storage bay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther colour:\u003c\/strong\u003e 6383C3 is the red cover for the same machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 6045 attachment cover spring, 6117ER attachment clips (set of three)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e genuine SEBO part, ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTypical searches include SEBO C3.1 attachment cover white, SEBO tool compartment lid, and genuine SEBO accessory door replacement.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214517592314,"sku":"6215SE","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/f042fdf4551b389a5b792c1de77a44be.jpg?v=1786670640"},{"product_id":"motor-cover-cord-reel-cover-for-c-series","title":"SEBO Motor and Cord Reel Cover Panel for the C Series","description":"\u003cp\u003eOne moulded panel covers both the motor bay and the cord reel on a C-series canister, and 6192 is the replacement for it. The panel closes the housing over two of the machine's bulkiest assemblies and gives the reel mechanism something solid to sit against. SEBO lists it for the C1.1, the C2.1 and the C3.1.\u003c\/p\u003e\u003cp\u003eDrops and knocks crack this panel at its screw bosses, and aged plastic can split along a mounting rib with no obvious impact behind it. Broken, it lets dust into the motor bay and can leave the cord retracting unevenly because the reel is no longer properly backed. A rattle that appears only while the cord is being wound in is the usual first clue.\u003c\/p\u003e\u003cp\u003eTwo covers on these machines are both called a motor cover, and ordering the wrong one is easy. This is the larger panel spanning the motor bay and the cord reel; the plain motor cover, which encloses the motor alone, is 6196. The seal that closes this panel down onto the bottom casing is 6186, and it should go in with any new cover rather than being reused. The seal for the smaller cover is a different number again, 6306. Other cord reel parts for the same C1.1, C2.1 and C3.1 machines include the internal cable 6291, which runs from the reel to the circuit board, and the rewind pedal spring 6023.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6192, motor and cord reel cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, C2.1 and C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e closes the housing over the motor bay and the cord reel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot the same as:\u003c\/strong\u003e 6196, the plain motor cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit with:\u003c\/strong\u003e 6186, the seal between this cover and the bottom casing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e genuine SEBO part, ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShoppers arrive here searching for a SEBO cord reel cover, a C series motor bay panel, or a genuine SEBO cover for a cracked canister housing.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214524997882,"sku":"6192","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/394916e49fa4e0eec234bfd9c689c8a4.jpg?v=1786670584"},{"product_id":"motor-cover-for-c-series","title":"SEBO Motor Cover for C Series Canisters","description":"\u003cp\u003eHeat is the enemy of any vacuum motor, and the cover over it is part of how SEBO manages that heat. Item 6196 encloses the motor on C-series canisters, shielding it from debris while keeping cooling air moving along the route the design intends. The same number is listed for the C1.1, the C2.1 and the C3.1.\u003c\/p\u003e\u003cp\u003eA cracked cover changes both of those things at once: grit reaches the motor and air short-circuits instead of sweeping past it. Broken mounting tabs also let the panel buzz against the housing, which is often what sends someone looking in the first place. Replacing it costs a fraction of the motor it protects, so it deserves attention as soon as damage shows.\u003c\/p\u003e\u003cp\u003eDo not confuse it with the larger panel that spans the motor bay and the cord reel together — that one is 6192, and it seals to the bottom casing with 6186. This cover has its own seal, 6306, and fitting a new cover onto a flattened old seal gives away the airtight joint you have just paid to restore. Underneath sit the parts that carry the motor: 6173 at the front, 6189 at the rear and the rubber mounting pair 6188ER, all listed for the same C1.1, C2.1 and C3.1 machines. The motor itself is 6165, supplied with its 05101S carbon brush set.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6196, motor cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, C2.1 and C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e encloses the motor and guides cooling airflow around it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistinct from:\u003c\/strong\u003e 6192, the combined motor and cord reel cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit with:\u003c\/strong\u003e 6306, the seal for this cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e genuine SEBO part from an authorized dealer, ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is the page for a SEBO motor cover, a C3.1 motor housing panel, or a genuine SEBO replacement cover for a cracked motor shroud.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214525423866,"sku":"6196","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1c83dbb5c65bce6af8e38412bda8cad4.jpg?v=1786670587"},{"product_id":"release-button-cover-for-et-1-et-2-felix-swivel-neck-2307gs-and-disco-gray-black","title":"SEBO Release Button Cover for FELIX, ET-1, ET-2 and DISCO Swivel Necks \u0026mdash; Gray Black","description":"\u003cp\u003eEvery time the handle is reclined, a thumb lands on the neck release button and on the cap that covers it. Part 2952GS is that cap in gray black, giving the button a defined face to press and keeping the mechanism beneath it sealed away from dust.\u003c\/p\u003e\u003cp\u003eSEBO numbers the button cover 118 on the ET-1\/ET-2 power head diagram and 118 again on the FELIX sheet, immediately after the release button and its leaf spring at 117. When the cap splits or works its way loose, the release starts to feel vague: you press, nothing obvious happens, and the handle only drops on the second or third attempt. If a new cap does not restore a crisp action, the button assembly itself is the next item to check, listed in gray black as 1737GS, and the complete gray black swivel neck it all mounts into is 2307GS.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2952GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ET-1 and ET-2 power heads, switched and unswitched, and the DISCO floor polisher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e FELIX Premium, FELIX 2 Premium, C3.1, AIRBELT D4 PREMIUM, AIRBELT E3 Premium and AIRBELT K3 PREMIUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck reference:\u003c\/strong\u003e used on swivel neck 2307GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 118 on the power head and FELIX sheets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther finish:\u003c\/strong\u003e light gray cap 2952HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 1737GS release button with leaf spring, 2951GS socket cover, 2945GS slide\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSmall parts like this decide how a machine feels in the hand, and a sound cap is the difference between a handle that releases on the first press and one that has to be worked at. Order by finish rather than by shape, since the light gray cap fits the same button but sits obviously wrong against darker trim. Authorized SEBO dealer stock, packed and shipped in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214525653242,"sku":"2952GS","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/92dff885fa0a839dc6919563415f13e0.jpg?v=1786668936"},{"product_id":"bearing-cover-for-cover-release-on-c-series","title":"SEBO Bearing Cover for the Cover Release — C1.1, C2.1 and C3.1","description":"\u003cp\u003eThe cover release on a C-series canister turns on a small bearing point, and SEBO's number for the moulded cap over that point is 6039. It keeps the bearing correctly located in the housing so the latch turns on the axis it was designed around.\u003c\/p\u003e\u003cp\u003eSplit caps announce themselves as play at the pivot. The release starts to feel loose in the hand, hangs at an angle when it is let go, or grates as grit reaches a bearing that is no longer covered. The important point is that the fault lies at the pivot rather than in the latch itself, so fitting a new release will not cure it — the replacement simply rocks in the same worn seat and the owner concludes the new part was faulty. Capping the bearing again is what puts the action right, and it is a far smaller job than the one most people expect.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6039\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, SEBO C2.1 and SEBO C3.1 canister vacuums\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e covers the cover-release bearing and keeps it in register\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch it serves:\u003c\/strong\u003e 6036DG, the dark gray cover release with seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed for these canisters:\u003c\/strong\u003e bearing block and hinge 6168DG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e a straight swap against the original, with no modification\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is a minor component with an outsized effect on how a machine feels to use, and it makes sense to fit one whenever the latch or the seal behind it is being disturbed anyway. People search for it as a SEBO bearing cover, a C3.1 cover release pivot cap, or a SEBO canister latch bearing. Genuine SEBO component supplied through an authorized dealership, dispatched in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214525980922,"sku":"6039","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/923f1f3022155719230ac7272e6b363a.jpg?v=1786670533"},{"product_id":"socket-cover-ts-neck-for-et-1-et-2-felix-except-white-and-disco-gray-black","title":"SEBO TS-Neck Socket Cover for FELIX, ET-1, ET-2 and DISCO \u0026mdash; Gray Black","description":"\u003cp\u003ePower reaches the brush motor through contacts in the neck, and 2951GS is the gray black cap that closes over them. It keeps carpet fluff and grit off the connection point where the power head joins the machine, in a spot that sits low down and collects everything the floor has to offer.\u003c\/p\u003e\u003cp\u003eSEBO places the socket cover at position 120 on both the ET-1\/ET-2 power head diagram and the FELIX sheet, next along from the swivel neck slide at 119. A cracked or absent cap tends to announce itself electrically rather than visually: the brush roll cuts in and out as the neck flexes, because nothing is holding the connection square any more. Unplug the machine at the outlet before opening the neck, and check the swivel neck wiring, part 0876ER, for chafing while the contacts are exposed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2951GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ET-1 and ET-2 power heads, switched and unswitched, and the DISCO floor polisher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e FELIX Premium, FELIX 2 Premium, C3.1, AIRBELT D4 PREMIUM, AIRBELT E3 Premium and AIRBELT K3 PREMIUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 120 on the power head and FELIX sheets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther finish:\u003c\/strong\u003e light gray cap 2951HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 0876ER swivel neck wiring, 2945GS slide, 2952GS release button cover, 2947GS back cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety step:\u003c\/strong\u003e disconnect from the outlet before working on the neck\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAn intermittent brush roll is one of the more frustrating faults to chase on a SEBO ET-1, and a missing socket cover is among the first causes worth ruling out before anything electrical is condemned. Genuine SEBO part, authorized dealer stock, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214526013690,"sku":"2951GS","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/f79c4382de9b7ab7eece7ba8e5737685.jpg?v=1786668928"},{"product_id":"on-off-button-lens-for-et-1-and-et-2","title":"SEBO On\/Off Button Lens for Switched ET-1 and ET-2 Power Heads","description":"\u003cp\u003eSwitched power heads carry a small moulded lens over the on\/off control. Part 2957 is that piece: the face your thumb presses and the cover that keeps carpet dust away from the switch sitting behind it.\u003c\/p\u003e\u003cp\u003eSEBO lists it at position 139 on the ET-1\/ET-2 power head diagram, where it is noted as the left hand item, at 139 on the FELIX sheet and at 136 on the DART. Yellowing, a star crack across the face, or a lens that has popped out and vanished under the sofa are the reasons this part gets ordered. Because the lens is only a cover, it is worth confirming that the switch itself still operates cleanly while the head is open: the single pole switch is 05114, the lever and leaf spring behind it are 2958ER, and SEBO sells the whole switch group built up as 2959ER if the fault turns out to be electrical rather than cosmetic.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2957\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ET-1 and ET-2 power heads built with the on\/off switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e FELIX Premium, FELIX 2 Premium, DART, C3.1, AIRBELT D4 PREMIUM, AIRBELT E3 Premium and AIRBELT K3 PREMIUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram positions:\u003c\/strong\u003e 139 on the power head and FELIX sheets, 136 on the DART\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e button face and dust cover for the head's on\/off switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 2956 brush light lens at 140, 05114 switch, 2958ER lever with leaf spring, 2959ER complete switch assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck first:\u003c\/strong\u003e confirm the switch still latches before blaming the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnswitched heads have no lens to lose, so check which build you have before ordering a SEBO ET-1 on\/off button lens. The brush light lens on the other side of the head is 2956, a different moulding at the next position along, and the two are easy to confuse when working from the drawing rather than the number. Genuine SEBO stock from an authorized dealer; ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214528340218,"sku":"2957","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/c4e52fcde7b157052422e5b0922e5a20.jpg?v=1786668948"},{"product_id":"lens-right-brush-light-for-et-1-and-et-2","title":"SEBO Brush Light Lens, Right Hand, for ET-1 and ET-2 Power Heads","description":"\u003cp\u003eClear plastic keeps grit off the brush light while letting the beam through, and 2956 is the right hand lens for that duty. It seats in the power head housing over the lamp, taking the scuffs and knocks that come from working tight against baseboards, table legs and stair risers.\u003c\/p\u003e\u003cp\u003eSEBO catalogues the right hand lens at position 140 on the ET-1\/ET-2 diagram, at 140 on the FELIX sheet and at 137 on the DART, immediately alongside the on\/off button lens. Lenses cloud with age and crack on impact, and a hazed lens dims the light long before the lamp behind it gives up, which is why a machine that seems to have lost its brush light often only needs the plastic changed. Wipe out the lamp recess while the lens is off the head, and check the seat for old grit so the new lens sits flush rather than proud.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2956, right hand lens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ET-1 and ET-2 power heads, switched and unswitched\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e FELIX Premium, FELIX 2 Premium, DART, C3.1, AIRBELT D4 PREMIUM, AIRBELT E3 Premium and AIRBELT K3 PREMIUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram positions:\u003c\/strong\u003e 140 on the power head and FELIX sheets, 137 on the DART\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e protects and covers the brush light in the head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 2957 on\/off button lens at 139, 2684ER printed circuit board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e clean the lamp recess before the new lens goes in\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBuyers hunting a SEBO ET-2 brush light lens replacement should note the handing: this is the right hand moulding, and the switch lens on the other side of the head is a separate number entirely. Both sit within one position of each other on the same diagram, so it is easy to order the wrong one from a drawing alone. Genuine SEBO lens supplied through an authorized dealer, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214528372986,"sku":"2956","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2956_411f9f5a-468b-4659-aca8-e6fd83aa6b4e.jpg?v=1785142869"},{"product_id":"foot-pedal-with-axle-and-spring-for-et-1-et-2-and-disco-orange","title":"SEBO Foot Pedal with Axle and Spring for FELIX, ET-1, ET-2 and DISCO \u0026mdash; Orange","description":"\u003cp\u003eOrange plastic, a steel pivot pin and a return spring arrive together as one item in 2937OR. Step on the pedal and the handle unlocks from upright so the machine can be reclined for a pass under a table; lift your foot and the spring carries the pedal back, ready for the next release.\u003c\/p\u003e\u003cp\u003eSEBO draws the pedal at position 112 on the ET-1\/ET-2 power head sheet, at 112 on the DART diagram and at 112 on the FELIX diagram, with the wheel at 111 on one side of it and the complete swivel neck at 113 on the other. The DISCO floor polisher parts list carries the same pedal at position 24. Fit a new one when the handle drops loose the moment the pedal is brushed, when the pedal stays down after being pressed, or when a snapped spring leaves the lock rattling as you push. Since the pin and spring come in the pack, nothing has to be salvaged off the old assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2937OR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e pedal, axle and return spring together\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e orange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ET-1 and ET-2 power heads, switched and unswitched, and the DISCO floor polisher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e FELIX Premium, FELIX 2 Premium, DART, C3.1, AIRBELT D4 PREMIUM, AIRBELT E3 Premium and AIRBELT K3 PREMIUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram positions:\u003c\/strong\u003e 112 on the power head, DART and FELIX sheets; 24 on the DISCO list\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 2306GS wheel at 111, 2307GS complete swivel neck at 113\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is one of the most-searched SEBO FELIX pedal repairs for a reason: the pedal takes a boot every time the machine is used, and it is the part that decides whether the handle release still feels positive. German-made SEBO component from an authorized dealer, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214528733434,"sku":"2937OR","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2937OR_efad1f05-495b-44c7-8c75-1a58885a96c8.jpg?v=1785139812"},{"product_id":"bearing-segments-metal-ts-neck-for-all-et-1-et-2-and-disco-swivel-necks-6-pc-set","title":"SEBO Metal Bearing Segments for the TS-Neck Swivel \u0026mdash; 6 Piece Set","description":"\u003cp\u003eSix machined metal segments carry the load inside a SEBO TS-neck swivel, and 2950ER supplies the full set. They ring the joint between power head and neck, spreading steering forces so the head turns on metal instead of grinding plastic against plastic.\u003c\/p\u003e\u003cp\u003eSEBO shows the segments as a six-piece set at position 116 on the ET-1\/ET-2 power head diagram and at 116 on the FELIX sheet, with the DISCO floor polisher list carrying them at position 7. Change all six together. Mixing tired segments with new ones loads the joint unevenly, and the swivel keeps the notchy, sloppy feel that sent you looking for this part in the first place. The two neighbours on the same diagram wear at a similar rate, so pull the slide 2945GS at position 119 and the swivel neck bearing 2954 at 122 while the joint is open and judge all three together.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2950ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e six metal segments, sold as one complete set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e metal, for the TS-neck swivel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the TS-neck swivel on ET-1 and ET-2 power heads, switched and unswitched, and on the DISCO floor polisher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e FELIX Premium, FELIX 2 Premium, C3.1, AIRBELT D4 PREMIUM, AIRBELT E3 Premium and AIRBELT K3 PREMIUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram positions:\u003c\/strong\u003e 116 on the power head and FELIX sheets, 7 on the DISCO list\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 2945GS and 2945HG slides, 2954 neck bearing, 2947GS back cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOf every part in a SEBO ET-1 or ET-2 swivel neck rebuild, this set does the most to bring back a tight, quiet joint, because it is the metal that actually takes the steering load rather than the plastic wrapped around it. Fitting the set is a strip-and-rebuild of the neck, so it is worth ordering everything the joint needs in one go. Authorized SEBO dealer supply, out the door in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214531027194,"sku":"2950ER","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/efa97c3bba2028741c79821e4c216750.jpg?v=1786668925"},{"product_id":"bearing-block-hinge-for-c-series","title":"SEBO Bearing Block and Hinge for C Series Canisters","description":"\u003cp\u003eHinged panels need something to pivot on, and on C-series canisters that duty falls to 6168DG. The moulding combines a bearing block with the hinge itself, giving the panel a defined axis and absorbing the small side loads that come from opening and closing it. It is listed for the C1.1, the C2.1 and the C3.1 alike, in the dark gray finish SEBO uses across the range's fittings.\u003c\/p\u003e\u003cp\u003eRepeated use wears the bore oval or snaps a lug clean off, at which point the panel sits crooked, drags on its opposite edge, or will not latch square. A panel that has started to bind is usually blamed on the catch when the pivot is the real culprit. A new block restores a clean axis without touching the rest of the body, and it is an inexpensive moulding, so renewing it during any strip-down is sensible. Anyone searching for a SEBO bearing block, a SEBO C series hinge or a genuine SEBO hinge block in dark gray is on the right listing.\u003c\/p\u003e\u003cp\u003eSeveral small pivot parts on these canisters look similar once a machine is in pieces, so check the number before ordering. The bearing cover that belongs to the cover release is 6039, the cover release itself with its seal is 6036DG, and the pin with screw and washer is 6027ER — all listed for the same C1.1, C2.1 and C3.1 machines, and all easy to mistake for one another on a stripped bench. Dark gray trim numbers nearby include the rear parking holder 6008DG, the side parking holder 6009DG and the castor 6095DG.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6168DG, bearing block and hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, C2.1 and C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e carries the pivot for a hinged panel and takes its side loads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasily confused with:\u003c\/strong\u003e 6039 bearing cover, 6036DG cover release with seal, 6027ER pin with screw and washer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e genuine SEBO part, ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214532075770,"sku":"6168DG","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3103268bce55adca61d664b65d105c58.jpg?v=1786670569"},{"product_id":"lever-with-leaf-spring-for-et-1-and-et-2","title":"SEBO Switch Lever with Leaf Spring for ET-1 and ET-2 Power Heads","description":"\u003cp\u003eBetween your thumb and the electrical contacts sits a lever backed by a leaf spring, and 2958ER supplies both as one piece. The spring gives the on\/off action its snap and returns the lever to rest after each press, so the control commits to on or to off rather than hovering somewhere between the two.\u003c\/p\u003e\u003cp\u003eSEBO draws the lever at position 131 on the ET-1\/ET-2 power head sheet, at 131 on the FELIX diagram and at 139 on the DART, where it sits with the single pole switch 05114 and the wire 0881 in the group that makes up the complete switch. A tired or broken spring shows up as a mushy button, a lever that stays pushed in, or a brush roll that shuts itself off when the head takes a knock against a chair leg. The lever is also supplied inside the built-up assembly 2959ER, which is the better choice when the switch body or its wiring has failed as well.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2958ER, lever and leaf spring together\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ET-1 and ET-2 power heads, switched and unswitched\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e FELIX Premium, FELIX 2 Premium, DART, C3.1, AIRBELT D4 PREMIUM, AIRBELT E3 Premium and AIRBELT K3 PREMIUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram positions:\u003c\/strong\u003e 131 on the power head and FELIX sheets, 139 on the DART\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e gives the on\/off control its travel, snap and return\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 2959ER complete switch assembly, 05114 single pole switch, 0881 wire to the board, 2957 button lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhen a SEBO ET-1 switch feels dead under the thumb but the machine still runs, the lever and its spring are the parts to look at before anything electrical gets condemned, and they are far less work to change than the board behind them. Genuine SEBO parts, authorized dealer supply, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214532763898,"sku":"2958ER","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2958ER.jpg?v=1785151879"},{"product_id":"swivel-neck-slide-for-et-1-et-2-felix-except-white-and-disco-gray-black","title":"SEBO Swivel Neck Slide for FELIX, ET-1, ET-2 and DISCO \u0026mdash; Gray Black","description":"\u003cp\u003eSteering feel comes from the swivel neck, and the slide is the piece that guides it. Finished in gray black, 2945GS rides in the neck joint linking head to handle, holding the pivot on a controlled path as the machine is swept left and right along a wall.\u003c\/p\u003e\u003cp\u003eSEBO draws this slide at position 119 on the ET-1\/ET-2 power head sheet and at the same number on the FELIX diagram, one place after the button cover at 118 and one before the socket cover at 120. A slide worn thin lets the neck feel loose and vague; one that has scored or picked up grit makes the head fight every change of direction. Either symptom points straight at this part. While the joint is apart it is worth checking the two components that share the load with it: the six-piece metal segment set 2950ER at position 116 and the swivel neck bearing 2954 at 122. If the neck itself is cracked rather than merely worn, the complete gray black assembly is 2307GS at 113.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2945GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ET-1 and ET-2 power heads, switched and unswitched, and the DISCO floor polisher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e FELIX Premium, FELIX 2 Premium, C3.1, AIRBELT D4 PREMIUM, AIRBELT E3 Premium and AIRBELT K3 PREMIUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 119 on the power head and FELIX sheets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish check:\u003c\/strong\u003e the light gray equivalent is stocked separately as 2945HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 2950ER segment set, 2954 neck bearing, 2947GS back cover, 2951GS socket cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSearches for a SEBO ET-2 swivel neck repair usually end at one of three parts, and the slide is the one to rule out before committing to a full rebuild of the joint. Authorized SEBO dealer stock, dispatched in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214533714170,"sku":"2945GS","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0d89380aa5368074327b0d406778b531.jpg?v=1786668915"},{"product_id":"plug-surround-for-c1-1-c2-1-and-c3-1-dark-gray","title":"SEBO Plug Surround for C1.1, C2.1 and C3.1 Canisters — Dark Gray","description":"\u003cp\u003eThe collar that frames the mains fitting on a C-series canister is a serviceable item in its own right, catalogued by SEBO as 6007DG in dark gray.\u003c\/p\u003e\u003cp\u003eIt holds that fitting square in its opening and absorbs the sideways load applied every time a lead is pushed home or tugged out. Plastic worked on for years eventually splits at a clip, or spreads far enough that the retaining tabs stop gripping, and from then on the fitting is free to rock in the panel. What moves next is the wiring behind it, because loads the housing used to carry are now being fed straight into the connection. That makes the repair which merely looks tidier also the one that protects the electrics: a fitting held firm is a fitting that stops working its own terminals loose.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6007DG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, SEBO C2.1 and SEBO C3.1 canister vacuums\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e frames the plug fitting and supports it in the body panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace it when:\u003c\/strong\u003e the collar is cracked, the tabs no longer grip, or the fitting moves in its aperture\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate listing:\u003c\/strong\u003e 6622GS is a different plug surround number and is not interchangeable with this one\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther dark gray C trim:\u003c\/strong\u003e release button 6083DG, cover release 6036DG, parking holders 6008DG and 6009DG, bottom casing 6197DG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWork with the machine disconnected from the mains, and support the fitting as the old collar comes away so that nothing is left hanging on the cable. If the panel around the aperture is also cracked the surround alone will not hold, and the casing behind it needs looking at first. Searches that bring people here include SEBO plug surround, C2.1 socket surround replacement, and SEBO canister plug collar in dark gray. Genuine SEBO moulding, dispatched in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214534566138,"sku":"6007DG","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5b737f43470745e38a78646b2d54ba21.jpg?v=1786670511"},{"product_id":"elbow-for-c-series","title":"SEBO Elbow Hose Connector for C1.1, C2.1 and C3.1","description":"\u003cp\u003eBetween the hose end and the wand on a C-series machine sits a rigid bend, and SEBO supplies it as part 6088. The elbow turns the airstream through its angle while giving you a solid place to hold and steer the tools, which is why it absorbs more handling than nearly anything else on the machine.\u003c\/p\u003e\u003cp\u003eHairline cracks around the collar are the usual failure. They whistle, they bleed off draw before the air ever reaches the nozzle, and they tend to lengthen once started. A sound elbow seals the joint again and the tools recover their bite. The quick test is to run the machine and cup a hand over the bend: if the note changes, the leak has been found.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, C2.1 and C3.1 canister vacuums\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e angled connector between hose and wand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace it:\u003c\/strong\u003e when air can be heard escaping at the bend\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6088\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe rest of the hose train is catalogued separately, so a leak traced elsewhere has its own number to order against. On the C1.1 and C2.1 the handle, retaining ring, hose and coupling come as 6355AM and the stainless telescopic tube as 6237ER, with the sliding knob 6425ER and locking mechanism 6238ER on the tube itself. The C3.1 takes the dual-control handle and hose 8545AM with the 60237PI tube.\u003c\/p\u003e\u003cp\u003eEverything that clips onto the far end of the bend depends on it sealing. The crevice nozzle is 1092GS, the upholstery nozzle 1491GS and the dusting brush 1094GS, and all three feel weak on a machine that is losing air here rather than at the nozzle itself. Check the cuff for a split before blaming the tool.\u003c\/p\u003e\u003cp\u003eBecause suction loss at the tool has several possible causes, it is worth ruling the bend in or out before ordering deeper into the machine. Genuine SEBO from an authorized SEBO dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214534598906,"sku":"6088","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/b33c5ec32ffaface0005a3d455792228.jpg?v=1786670545"},{"product_id":"air-adapter-for-c-series","title":"SEBO Air Adapter for C Series Canisters","description":"\u003cp\u003eSmall fittings do quiet work. This adapter joins one section of the C-series airway to the next, and when it fails the loss shows up as suction that never quite reaches the floor tool. Part 6293 is the replacement, moulded to the original dimensions so the mating pieces seat without play. SEBO lists it for the C1.1, the C2.1 and the C3.1.\u003c\/p\u003e\u003cp\u003eAdapters take a beating from repeated connection and disconnection. Hairline cracks and worn sealing lips let air enter partway along the path, robbing the nozzle of the flow it needs. Because the leak is inside the machine rather than at the hose, the symptom is easy to misread — people change bags and filters twice before they think to look at a fitting. Hold the old part to the light and flex it gently; a crack that opens under load will show itself. Useful search terms for this item are SEBO air adapter, SEBO C series airflow fitting, and genuine SEBO repair part for a canister vacuum losing suction.\u003c\/p\u003e\u003cp\u003eThe rest of the air path is catalogued piece by piece for these canisters, which makes tracing a leak a matter of elimination rather than guesswork. The elbow is 6088, the bag holder assembly with its safety catch is 6094, and the microfilter is sealed by 6034 — all listed for the same C1.1, C2.1 and C3.1 machines. Suction necks are model-specific and carry their own numbers, 6319UL and 6318UL. If the leak turns out to be at a panel joint rather than in the airway, the seals to look at are 6186, 6187, 6213 and 6120\/3.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6293, air adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, C2.1 and C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e joins sections of the machine's air path\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e cracked, distorted, or no longer sealing against its mating part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearby in the airway:\u003c\/strong\u003e 6088 elbow, 6094 bag holder, 6034 microfilter seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e genuine SEBO fitting, ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214534631674,"sku":"6293","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/387ea1bcfafec54bdf7dec00ec807220.jpg?v=1786670600"},{"product_id":"pin-with-screw-and-washer-for-c-series","title":"SEBO Pin with Screw and Washer for C1.1, C2.1 and C3.1 Canisters","description":"\u003cp\u003eThree pieces travel under one catalogue number: the pin itself, the screw that retains it and the washer that goes between screw head and moulding. SEBO lists the set for the C1.1, C2.1 and C3.1 canisters.\u003c\/p\u003e\u003cp\u003eThe pin is an axis. A moving component turns on it, and the screw with its washer is what stops that pin walking out of its bore under the vibration of a running machine — which, given enough hours, is exactly what an unretained pin does. That is why the three are sold as a set: fitting a fresh pin under a screw whose thread has already given up is a repair with a short life ahead of it.\u003c\/p\u003e\u003cp\u003eTwo fitting notes decide whether the joint lasts. Put the washer back where it belongs — without it, the screw head presses straight into the plastic and cuts its own recess, which is how a joint that was merely slack becomes one that will not hold at all. And tighten to snug rather than hard: the thread is going into a moulded boss, not steel, and a single turn past snug strips it, turning a small hardware order into a housing repair.\u003c\/p\u003e\u003cp\u003eWhat sends people looking is play at the pin. A component that rocks where it should be firm, one sitting slightly off square, or one that clicks once each time it moves through its travel. Related C-series internals carrying the same listed fitment are the rod 6022 and the springs 6023 and 6045, worth inspecting while the assembly is open. Shoppers reach this listing searching for a SEBO pin screw and washer set, C3.1 pivot pin hardware, or genuine SEBO fastener 6027ER.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e SEBO C1.1, C2.1 and C3.1 canister vacuums\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e pin, retaining screw and washer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6027ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChange it when:\u003c\/strong\u003e the component it carries has developed play, sits out of line, or clicks in use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearby C-series numbers:\u003c\/strong\u003e 6022 rod, 6023 spring, 6045 spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO hardware, dispatched in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214534992122,"sku":"6027ER","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/212c81c87dabbefc14deeae74376937d.jpg?v=1786670525"},{"product_id":"screw-m4-x-12-iso-7380-10-pack-for-c-series","title":"SEBO M4 x 12 ISO 7380 Button-Head Screws for C Series Canisters — 10 Pack","description":"\u003cp\u003eTen button-head M4 x 12 screws to ISO 7380, bagged under SEBO part number 0199ER, sized for the shell and cover fixings on the C series canister. The single of the same screw is stocked as 0199.\u003c\/p\u003e\u003cp\u003eThe low profile of an ISO 7380 head is deliberate here rather than decorative: it sits down in its recess instead of standing proud where a hose, a chair leg or a doorframe would catch it. A canister is dragged behind its user all day, so the fasteners on the outside of the shell take knocks that an upright's never see. Ten is roughly what a full teardown consumes once the two or three that came out damaged are set aside, which is why the screw is bagged this way rather than sold one at a time. Screws that come out of a shell are rarely all reusable: some have picked up a burr, one has a rounded recess, and at least one has usually gone under the bench.\u003c\/p\u003e\u003cp\u003eBoth halves of the description have to match when ordering. M4 x 12 fixes the thread and the length; ISO 7380 fixes the head form, and a pan-head screw of identical thread will hold the panel but sit higher than SEBO intended. Fits the SEBO C1.1, C2.1 and C3.1. If the same fixing keeps working loose after a fresh screw goes in, the fault is in the boss rather than the fastener, and no new hardware will hold in a stripped thread.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSEBO part 0199ER — ten screws per bag\u003c\/li\u003e\n\u003cli\u003eM4 x 12 to ISO 7380, button head\u003c\/li\u003e\n\u003cli\u003eConstruction: metric M4 machine thread, 12 mm length, low domed head\u003c\/li\u003e\n\u003cli\u003eFits the SEBO C1.1, C2.1 and C3.1 canisters\u003c\/li\u003e\n\u003cli\u003ePack: ten screws. The single unit of the same screw is 0199\u003c\/li\u003e\n\u003cli\u003eReplace when: heads have been rounded out, screws cross-threaded, or fasteners lost during a strip-down\u003c\/li\u003e\n\u003cli\u003eOther C series service parts: carbon brush set 05101S for the 6165 suction motor\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO hardware; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214540333306,"sku":"0199ER","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/458e800f36d8fe79439a1a331a14247b.jpg?v=1786670503"},{"product_id":"spring-for-axle-adjustment-assembly-for-et-1-and-et-2","title":"SEBO Spring for the Axle Adjustment Assembly \u0026mdash; ET-1 and ET-2 Power Heads","description":"\u003cp\u003eA height setting only holds because a spring is holding it. Part 2929 is that spring inside the axle adjustment assembly of the ET-1 and ET-2 power heads, catalogued at position 106 on SEBO's ET-1\/ET-2, DART and FELIX sheets, immediately ahead of the complete pile adjustment assembly at 107 and the selector knob at 110.\u003c\/p\u003e\u003cp\u003eAs the spring weakens, the head stops keeping the height it was given. Brush contact turns uneven, one setting drags on plush carpet while the next barely reaches the fibers, and the selector loses the crisp step from one position to the next. Because the part is buried in the adjustment group, it is usually renewed while the head is already stripped on the bench, alongside whichever selector knob the machine carries: 2931GS in gray black, 2931HG in light gray, 2931SB in silver. Where the whole group is tired rather than just the spring, SEBO sells the assembly complete as 2316GS or, for light gray machines, 2316HG.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2929, single spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ET-1 and ET-2 power heads, with or without the on\/off switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e FELIX Premium, FELIX 2 Premium, DART, C3.1, AIRBELT D4 PREMIUM, AIRBELT E3 Premium and AIRBELT K3 PREMIUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 106 on the ET-1\/ET-2, DART and FELIX lists\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e holds tension in the axle adjustment mechanism that sets brush height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 2316GS and 2316HG pile adjustment assemblies, 2931GS, 2931HG and 2931SB knobs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical symptom:\u003c\/strong\u003e a carpet height setting that will not stay where it is put\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAnyone searching for a SEBO ET-1 height adjustment spring is usually chasing that one fault, and this is the smallest part in the group capable of causing it, so it is the sensible place to start. Genuine SEBO component supplied by an authorized dealer, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214540890362,"sku":"2929","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/ef2faebb8522a36290cbd8c73a909dc9.jpg?v=1786668898"},{"product_id":"spring-for-cable-rewind-pedal-c-series","title":"SEBO Cable Rewind Pedal Spring for C1.1, C2.1 and C3.1 Canisters","description":"\u003cp\u003eWhen a rewind pedal goes dead underfoot, the spring behind it has usually failed rather than the pedal itself. SEBO stocks that spring separately as part 6023 for the C1.1, C2.1 and C3.1.\u003c\/p\u003e\u003cp\u003eIt does two jobs in one stroke. Going down, it gives the pedal enough load to trip the catch holding the cord reel; coming back, it lifts the pedal clear again so that the next press starts from the same place. A spring that has fatigued, or snapped at a coil, leaves the pedal lying wherever it was last pushed and the cable waiting to be wound in by hand — the same complaint a cracked pedal produces, which is exactly why both are worth checking before an order goes in. The distinction is simple enough to make at the machine: if the pedal moves through its full stroke and nothing releases, suspect the spring; if the stroke itself has shortened, suspect the moulding.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, SEBO C2.1 and SEBO C3.1 canister vacuums\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e loads and returns the cord rewind pedal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e as one spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePedals it works behind:\u003c\/strong\u003e 6006DR in red, 6006GW in white, 6006TK in teal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther springs listed for these canisters:\u003c\/strong\u003e 6045 for the attachment cover, and 6143\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSince SEBO lists more than one spring for this family of machines, give the number when ordering rather than the description — the wording overlaps, the numbers do not. It is small enough to be worth adding to any order that already has the canister coming apart for other work. Searches that land here include SEBO rewind spring, C2.1 cord reel pedal spring, and SEBO cable retract spring replacement. Genuine SEBO part, dispatched in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214541381882,"sku":"6023","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/a4879ab4a989289e9aaf01987384442a.jpg?v=1786670522"},{"product_id":"spring-lock-for-k-and-c-series","title":"SEBO Spring Lock for AIRBELT K and C Series Canisters","description":"\u003cp\u003eA coil supplying tension against a formed lock face — that is the whole of 6042WS, the spring lock SEBO fits to the AIRBELT K2 Kombi, K2 Turbo and K3 Premium and to the C1.1, C2.1 and C3.1 canisters. Working the latch loads the coil, releasing it lets the lock face drop back onto its mating component, and the arrangement resets itself every cycle without adjustment.\u003c\/p\u003e\u003cp\u003eIts place on the exploded view says a good deal about what it holds. The AIRBELT K sheet opens with the bottom casing at item 1, the suction neck at item 2 and the seal between them, 6014, at item 3, with the spring lock following immediately at item 4. That puts it at the front of the machine where the hose enters, rather than anywhere near the filtration internals. Anybody who has the canister apart far enough to reach the seal has this catch in front of them at the same moment, which makes changing both during one strip-down sensible use of the work.\u003c\/p\u003e\u003cp\u003eSprings relax as they age. When the tension has faded, or the lock face has rounded off at its working edge, whatever the catch holds down begins to creep while the machine runs and eventually releases at an unhelpful moment. The change is felt before it is seen. A catch that once shut with a definite snap starts shutting with a soft push, and because the decline is gradual most owners register it only after something has already come adrift.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber\u003c\/strong\u003e — 6042WS, supplied singly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIRBELT machines\u003c\/strong\u003e — SEBO AIRBELT K2 Kombi, K2 Turbo, K3 Premium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanisters\u003c\/strong\u003e — SEBO C1.1, C2.1, C3.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExploded view\u003c\/strong\u003e — item 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNext to it\u003c\/strong\u003e — seal 6014 at item 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShared hardware\u003c\/strong\u003e — casing clip 6086HG across all six machines, foam bumper 6046UL on the canisters\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eListings like this one turn up under SEBO spring lock, AIRBELT K2 catch spring, and SEBO canister latch spring replacement. Genuine SEBO hardware through an authorized dealership, dispatched in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214542201082,"sku":"6042WS","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/e1f023743985b482177577078d3f48a4.jpg?v=1786670368"},{"product_id":"spring-for-on-off-pedal-on-c-series","title":"SEBO On\/Off Pedal Return Spring for C Series Canisters","description":"\u003cp\u003eStep on the power pedal and nothing springs back — that dead feeling underfoot is what 6143 exists to cure. It is the small return spring behind the foot switch on C-series canisters, providing resistance as the pedal travels down and lifting it clear once your foot comes off. SEBO fits the same spring across the C1.1, the C2.1 and the C3.1, so one number covers every machine in the range.\u003c\/p\u003e\u003cp\u003eSprings this size fatigue after thousands of presses. A stretched or broken one leaves the pedal sitting low, sticking in place, or cycling the machine at random. The part costs very little, so most technicians fit a new one any time the housing is open for other work. If the pedal feels mushy but still returns, the spring is on its way out rather than gone.\u003c\/p\u003e\u003cp\u003eOrder the right one, because a C-series canister has a power pedal and a cord rewind pedal, and each is sprung separately. This spring belongs to the power pedal. The rewind side is listed under 6023, and the two are not interchangeable. Where the pedal moulding itself has cracked rather than merely gone limp, SEBO catalogues complete pedal assemblies as 6309TK and 6309DR, both of which list this spring among their contents — worth checking the plastic before you decide which number to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6143, return spring for the on\/off pedal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, C2.1 and C3.1 canisters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e gives the pedal its resistance and its return travel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not confuse with:\u003c\/strong\u003e 6023, the spring for the cord rewind pedal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso supplied inside:\u003c\/strong\u003e pedal assemblies 6309TK and 6309DR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e as a single spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e unplug the canister before opening the housing to reach it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e genuine SEBO spring, ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAnyone searching for a SEBO pedal spring, a C3.1 on\/off pedal spring replacement, or a genuine SEBO foot switch spring is looking at the correct listing.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214542233850,"sku":"6143","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/6143.jpg?v=1785156053"},{"product_id":"spring-for-attachment-cover-on-c-series","title":"SEBO Attachment Cover Spring for C1.1, C2.1 and C3.1","description":"\u003cp\u003eTool compartments on these canisters open under spring pressure: free the catch and the cover comes up to meet your hand. SEBO part 6045 supplies that lift.\u003c\/p\u003e\u003cp\u003eShut, the same spring holds the lid down flat against its surround. Once the coil has set solid or fractured, the cover either hangs slack on its hinge or stays where it is when released, and the crevice nozzle and dusting brush kept below it start knocking about as the machine is towed around. Neither symptom is serious in isolation. Together they are what makes a mechanically sound canister feel tired, and they are cured by a component that fits in the palm of one hand.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6045\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO C1.1, SEBO C2.1 and SEBO C3.1 canister vacuums\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e provides the lift and the closing pressure for the tool lid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e as a single spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovers it lifts:\u003c\/strong\u003e 6383C3 and 6383AM in red, 6380AM and 6382AM in teal green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClips inside the compartment:\u003c\/strong\u003e attachment clip set 6117ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools kept there:\u003c\/strong\u003e crevice nozzle 1092GS, dusting brush 1387GS, upholstery nozzle 1491GS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMore than one spring is catalogued for these canisters — 6023 loads the cord rewind pedal and 6143 is a separate item again — so quote the number rather than the description when ordering. Support the cover as the new spring goes in, so that it is not forced beyond its working range during fitting. Owners find this page searching for a SEBO attachment cover spring, a C3.1 tool lid spring, or a SEBO accessory compartment spring. Genuine SEBO part, dispatched in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214542430458,"sku":"6045","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/159f7e803252da84846419d80843d2b4.jpg?v=1786670537"}],"url":"https:\/\/evacuumsandmore.com\/collections\/sebo-c3-1.oembed?page=4","provider":"Vacuums and More","version":"1.0","type":"link"}