{"title":"Sebo Duo","description":null,"products":[{"product_id":"bearing-block-assembly-l-h-for-duo-light-gray","title":"SEBO Left-Hand Bearing Block Assembly for the Duo, Light Gray","description":"\u003cp\u003eSupplied as an assembly rather than a bare moulding, part 3052HG puts the whole left-hand bearing station back into a Duo brush machine in one operation. SEBO shows it at position 70 of the Duo parts diagram, finished in light gray to match the rest of the machine, with the brush drive cog 3007 at 68 and the plain bearing block 3074HG at 69 immediately before it.\u003c\/p\u003e\u003cp\u003eBearing blocks wear from the inside out, and the sequence is always the same. The seat opens up, the shaft gains a little play, and the end of the brush begins to knock and drag rather than spinning freely. From the handle it sounds like a rumble that comes and goes with load, and on the carpet it looks like grooming that has gone patchy at one side. Because this part arrives complete, there is no matching of individual pieces on the bench - which matters on a repair where a fractional misalignment is enough to bring the noise straight back within a week. The right-hand side of the machine uses bearing block 3010HG under its own number, so check which end you have out before ordering, and look at the spring 3028 and the pulleys either side while the assembly is off.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3052HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e left hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e as a complete assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 70 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpposite side:\u003c\/strong\u003e right-hand bearing block 3010HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated:\u003c\/strong\u003e bearing block 3074HG, brush drive cog 3007, spring 3028\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAnyone searching a SEBO Duo bearing block, a Duo left hand brush bearing or the number 3052HG has the correct listing. Genuine SEBO assembly supplied by an authorized dealer, shipping in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473027834,"sku":"3052HG","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3052HG_8142e7a0-c8ac-4825-941f-f61275beec6d.jpg?v=1785143278"},{"product_id":"bearing-block-l-h-for-duo-light-gray","title":"SEBO Left-Hand Brush Roll Bearing Block for the Duo, Light Gray","description":"\u003cp\u003eLight gray and left-hand specific, SEBO 3074HG supports the left-hand end of the brush roll in the Duo brush machine. It is item 69 on the Duo parts diagram, sitting between the brush drive cog 3007 at 68 and the left-hand bearing block assembly 3052HG at 70, and its job is to give the roll a low-friction surface to spin against.\u003c\/p\u003e\u003cp\u003eBlocks wear from the inside out, and the fault reports itself long before anything breaks. A grinding note from one end of the head, a roll that visibly wobbles as it turns, or a roll that binds and drags on the motor all point at the block rather than at the brush strip itself. Left alone, the extra play works through into the belt, the pulleys and the drive cog, so a small moulding turns into a much larger repair. Two things are worth confirming before ordering. First the side, because the opposite end of the roll takes bearing block 3010HG under its own number. Second whether the bare block is what is needed at all, since SEBO also lists 3052HG as a complete left-hand bearing block assembly for machines where more than the block has gone. Colour is part of the identity here as well: this is the light gray moulding, matching the other light gray components along that side of the machine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3074HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e left hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 69 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpposite side:\u003c\/strong\u003e right-hand bearing block 3010HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete assembly version:\u003c\/strong\u003e 3052HG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSupplied as genuine SEBO stock by an authorized dealer, shipping in 2-5 business days. This is the listing for a Duo bearing block, a SEBO brush roll bearing or part 3074HG by number.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473093370,"sku":"3074HG","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0d2059866bb06300b26f82f325077344.jpg?v=1786670904"},{"product_id":"bearing-block-r-h-for-duo-light-gray","title":"SEBO Right-Hand Bearing Block for the Duo, Light Gray","description":"\u003cp\u003eRumble or wobble from the brush's right-hand end is normally the block carrying it, worn oval after enough hours on carpet. Part 3010HG is SEBO's right-hand bearing block for the Duo, moulded in light gray to match the machine, and drawn at position 30 of the parts diagram between the M4 x 10 screws at 29 and the brush housing at 31.\u003c\/p\u003e\u003cp\u003eThe block locates the shaft end and absorbs the side loading that brushing produces. When the seat opens up, the brush drifts out of line, scuffs against the housing and adds drag that the belt and motor have to pay for; left long enough it will mark the housing itself, which is a considerably larger repair. The symptoms worth acting on are a knock that follows brush speed rather than motor speed, visible play when the brush end is lifted by hand, and a brush that has started to polish one edge of its chamber.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3010HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e right hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 30 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 3074HG bearing block LH at 69, 3052HG bearing block assembly LH at 70, 0222 ball bearing 626-2Z at 58, 3030 clamp at 52\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe left-hand side of the machine uses its own numbers, so confirm which end you have stripped down before ordering: SEBO lists 3074HG for the left bearing block and 3052HG for the left bearing block assembly. If the ball bearing 0222 has been running rough, replacing it alongside the block saves a second strip-down, and the clamp 3030 that retains it is a small item worth having on the same order. Searches for a SEBO Duo bearing block, a right hand brush bearing or part 3010HG all arrive here. Genuine SEBO component from an authorized dealer. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473715962,"sku":"3010HG","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/d63fb67e2ec1d4149a44271f3392d403.jpg?v=1786670831"},{"product_id":"drive-belt-3mm-for-duo","title":"SEBO 3 mm Drive Belt for the Duo","description":"\u003cp\u003eTwo different drive belts are listed for the SEBO Duo brush machine and they cannot stand in for one another. This is the 3 mm belt, part 3038, drawn at position 37 of the Duo parts diagram in the main body group - close to the 120 V motor 3049ER at position 34, the locking washer 0141 at 35 and the cover 3004SE at 39. The 5 mm belt carries its own number and lives further into the gear group.\u003c\/p\u003e\u003cp\u003eRubber gives up in a predictable order. It stretches first, so the belt slips under load without looking any different. Then the running face glazes and stops keying into the pulley grooves at all. By the last stage there is black dust collecting around the pulleys and the brush is turning noticeably slower than the motor is asking for, even though nothing sounds obviously wrong from the handle. That gap between how the machine sounds and what the brush is actually doing is the symptom worth trusting. A belt is a wear item on any brush machine, and keeping a spare with the vacuum turns a failure into a few minutes of work instead of a few days of waiting.\u003c\/p\u003e\u003cp\u003eWhile the belt is off, it is worth looking at what it runs on. A grooved or glazed pulley will chew through a new belt as quickly as it did the old one.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3038\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3 mm, as designated by SEBO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e rubber drive belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 37 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck at the same time:\u003c\/strong\u003e motor pulley 3014, pulley 3013 and pulley 3009\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is the listing to order from for a SEBO Duo belt replacement, a Duo 3 mm drive belt, or genuine SEBO belt 3038 by part number. Supplied by an authorized dealer, shipping in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214474961146,"sku":"3038","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3022906de9f9573101fa57eb2e4e09c6.jpg?v=1786670879"},{"product_id":"drive-belt-5-mm-for-duo","title":"SEBO 5 mm Drive Belt for the Duo","description":"\u003cp\u003eSEBO designates this one the 5 mm belt. Part 3042 sits at position 54 of the Duo parts diagram, deep in the gear group between the pulley 3013 at 53 and the left-hand-thread gear wheel 3022 at 55, and it is a different item from the 3 mm belt listed separately for the same machine. Ordering by width rather than by number is where most mistakes happen, so take the part number from the diagram.\u003c\/p\u003e\u003cp\u003eThe symptoms build slowly enough to be easy to miss. First the belt stretches and starts to slip under load, so the brush loses speed only when it meets resistance. Then the running face glazes and stops gripping the pulley grooves at all. In the end the brush is barely turning while the motor sounds perfectly healthy, which is exactly the combination that sends people looking for a fault in the wrong half of the machine. Anyone already stripping the drive to reach the pulleys, the gear wheels or the bearing blocks should renew the belt while it is off the machine, because getting back in later costs far more time than the belt itself. Keeping one in the toolbox turns a dead machine into a short job rather than a wait.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3042\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5 mm, as designated by SEBO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 54 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns between:\u003c\/strong\u003e pulley 3013 at position 53 and gear wheel 3022 at position 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot interchangeable with:\u003c\/strong\u003e the 3 mm Duo belt, which carries its own part number\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA SEBO Duo 5 mm belt, a Duo gear drive belt and SEBO part 3042 all describe this listing. Genuine SEBO belt, dispatched by an authorized dealer in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214475059450,"sku":"3042","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3042.jpg?v=1785143302"},{"product_id":"bumper-for-duo-middle-gray","title":"SEBO Bumper for the DUO - Middle Gray","description":"\u003cp\u003eMiddle gray is the bumper shade used on the SEBO DUO, and part 2007HG is that trim supplied as a genuine replacement. It runs along the machine at exactly the height where contact with furniture, walls and door frames actually happens.\u003c\/p\u003e\u003cp\u003eBumpers are consumable by design, since they exist so the housing does not have to take the damage. When one goes brittle with age, splits along its length, or drops out of the channel retaining it, that protection is gone and the body of the machine starts collecting the scrapes itself. Marks on skirting boards and furniture legs tend to follow, because a hard plastic edge is far less forgiving than the trim that used to cover it. Renewing the strip protects the housing behind it and keeps both the DUO and the rooms it works in looking considerably better.\u003c\/p\u003e\u003cp\u003eThe DUO is the machine this shade belongs to, and confirming that before ordering is the most useful thing you can do, since the base number also covers a dark gray version of the same trim. Trim is one of the few areas of a vacuum where the visual match matters as much as the fit, and a bumper in the wrong shade is obvious from across a room. Middle gray is what the DUO wore when it left the factory.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO DUO\u003c\/li\u003e\n\u003cli\u003eColour: middle gray\u003c\/li\u003e\n\u003cli\u003eReplace when: the bumper is cracked, brittle, hanging loose or missing\u003c\/li\u003e\n\u003cli\u003ePart number: 2007HG, sold each\u003c\/li\u003e\n\u003cli\u003eRelated: 2007DG, the same base number supplied in dark gray\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe replacement seats where the old strip sat, with no cutting and no adhesive involved. Confirm the machine is a DUO before ordering, because the base number is shared and the finish is given by the suffix. Anyone searching for a SEBO DUO bumper, a DUO trim strip or a middle gray bumper replacement is in the right place. Genuine SEBO stock, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214477582586,"sku":"2007HG","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2007HG.jpg?v=1709347854"},{"product_id":"plunger-button-complete-for-duo-light-gray","title":"SEBO Plunger Button, Complete, for the Duo - Light Gray","description":"\u003cp\u003eLight gray and supplied ready to drop in, 2438HG is the full push-button sub-assembly for the SEBO Duo, listed at position 44 in the machine parts diagram. It is the control surface a thumb lands on, seated in the housing so its travel stays square.\u003c\/p\u003e\u003cp\u003eButtons fail two ways. The plastic splits around the shaft, usually starting as a hairline that only shows when the button is pressed, or the action goes mushy and the button no longer stands proud of the housing. Either way the press stops being definite, and on a control operated without looking, that ambiguity is the whole problem. Because this part arrives built up rather than as loose pieces, the repair is a straight exchange with no fiddling to align internals or to hold small components in place while the housing closes.\u003c\/p\u003e\u003cp\u003eThe return spring behind the button is a separate item at position 45, part 2423, and it is worth fitting at the same time. A tired spring will make a brand new button feel just as vague as the old one, and the two are only a few minutes apart once the machine is open. Clean the recess the button sits in while it is accessible, since grit in the bore will drag on a new assembly exactly as it did on the old one.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2438HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 44, SEBO Duo exploded view\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition supplied:\u003c\/strong\u003e complete assembly, ready to fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the button is cracked, sits low in the housing, or no longer returns cleanly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorth doing together:\u003c\/strong\u003e return spring 2423 at position 45\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStocked genuine through our authorized SEBO dealership, shipping in 2-5 business days. This is the part behind searches for a SEBO Duo plunger button, a Duo push button replacement, or a light gray Duo button assembly.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214478500090,"sku":"2438HG","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/a625f5ecc91182ba5dcdc715e3bba784.jpg?v=1786670816"},{"product_id":"handle-with-cord-complete-for-duo-light-gray","title":"SEBO Complete Handle with Power Cord for the Duo, Light Gray","description":"\u003cp\u003eSold as one finished assembly, SEBO 3122\/H pairs the light gray upper handle of the Duo brush machine with its power cord already installed. SEBO lists it at position 23 in the Duo parts diagram and notes on that sheet that the assembly covers items 1 through 21 of the same drawing.\u003c\/p\u003e\u003cp\u003eThat scope is the reason to buy it. Positions 1 to 21 take in the cable clamp, the handle cable, the switch cap and its holder, the rocker switch, the handle grip, the cord itself, the cable hook, the handle connector and its cover, and the contact cover - which is to say very nearly everything above the neck. A handle cracked at a stress point and a cord broken somewhere in its flex zone are both common on machines with years of work behind them, and the two faults tend to arrive together because the same movement causes both. Rebuilding the top of the vacuum piece by piece off the diagram means chasing a dozen small part numbers and refitting each one; 3122\/H arrives as one finished unit, ready to bolt on.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3122\/H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 23 on the SEBO Duo parts diagram, covering positions 1 to 21\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e upper handle with the power cord attached\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore you start:\u003c\/strong\u003e unplug the machine at the wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual parts within the same group:\u003c\/strong\u003e handle grip 3142HG, switch cap 3137GS, switch cap holder 3136HG, handle cable 3125, cable hook 3118HG, handle connector 3113HG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO assembly from an authorized dealer, shipping in 2-5 business days. Listed for anyone searching a Duo handle assembly, a SEBO handle with cord, or part number 3122\/H.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214485446906,"sku":"3122\/H","price":100.0,"currency_code":"USD","in_stock":true}]},{"product_id":"power-supply-cord-for-x1-x2-and-duo-dark-gray","title":"SEBO Power Supply Cord for AUTOMATIC X1, X2 and the Duo — Dark Gray","description":"\u003cp\u003eA cord that only works when held at a certain angle, or one starting to fray where it leaves the machine, has stopped being an annoyance and become a hazard. Order code 5433DG covers the dark gray mains lead used on the AUTOMATIC X1, the AUTOMATIC X2 and the SEBO Duo, listed as item 9 on the Duo drawing.\u003c\/p\u003e\u003cp\u003eOn that sheet it belongs to the handle group, sitting beside the handle cable at item 3 and the switch cap with its holder at items 5 and 6 — the wiring run between the grip and the body of the machine. What arrives is a full-length lead rather than a repair section, terminated the way the factory terminated it so that it lands on the same internal connections.\u003c\/p\u003e\u003cp\u003eReplace rather than tape when any of the following turn up: bare conductor showing anywhere along the jacket, a plug running warm or carrying scorch marks, a slice taken out by a doorway or a caster, or power that flickers as the cable is flexed. Work of this kind involves mains terminations, which suits someone confident with them or a service centre.\u003c\/p\u003e\u003cp\u003eRoute the new lead exactly as the old one ran, through every original clamp and guide. A cord pinched under a screw boss, or pulled tight where it enters the body, will fail again at that point of strain rather than lasting the life of the machine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder code:\u003c\/strong\u003e 5433DG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachines covered:\u003c\/strong\u003e AUTOMATIC X1, AUTOMATIC X2, SEBO Duo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShade:\u003c\/strong\u003e dark gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawn at:\u003c\/strong\u003e item 9 on the SEBO Duo sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAround it there:\u003c\/strong\u003e handle cable 3125, switch cap 3137GS, switch cap holder 3136HG, handle grip 3142HG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA genuine SEBO lead meets the original clamps and connections as it was meant to, which is what keeps this a repair rather than an adaptation.\u003c\/p\u003e\u003cp\u003eGenuine SEBO mains lead, dispatched within 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214486102266,"sku":"5433DG","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5433DG.jpg?v=1785157940"},{"product_id":"handle-cable-for-duo","title":"SEBO Handle Cable for the Duo","description":"\u003cp\u003eIntermittent controls on a Duo brush machine usually mean a tired handle cable rather than a dead switch. SEBO 3125 is that cable, listed at position 3 in the Duo parts diagram between the cable clamp 1030UL at position 1 and the switch cap at 5, and it runs up inside the handle to link the controls with the body of the machine.\u003c\/p\u003e\u003cp\u003eIts conductors flex with every stroke the operator takes, thousands of cycles a week in commercial use, and copper only tolerates that for so long. Eventually a strand fractures inside the insulation or a terminal backs out of its housing, and the machine begins to drop out when the handle moves, respond erratically to the switch, or refuse to start at all. The tell is that the fault follows movement rather than the switch itself: press the control and nothing happens, nudge the handle and the machine comes back. Renewing the cable clears the fault at source instead of masking it, and it is a far smaller job than replacing the rocker switch 05113 or the complete handle. Photograph the routing and the connector orientation before anything comes apart, and unplug the machine at the wall first.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3125\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 3 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarries:\u003c\/strong\u003e switch signals and power up the handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the machine cuts out as the handle moves or answers the switch inconsistently\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated parts:\u003c\/strong\u003e cable clamp 1030UL, contact cover 1020UL, rocker switch 05113, complete handle 3122\/H\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO cable from an authorized dealer, shipping in 2-5 business days. Searches for a Duo handle cable, SEBO handle wiring or part 3125 land here.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214486593786,"sku":"3125","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/637bf43fc152d56988405aff295da8b9.jpg?v=1786670919"},{"product_id":"terminal-block-2-wire-for-370-series-and-duo","title":"SEBO 2-Wire Terminal Block for 370 Series and DUO","description":"\u003cp\u003eInside a SEBO 370 series machine or a SEBO DUO, part 502 is the small insulated block that brings a pair of conductors together at one fixed junction and keeps them isolated from the metal and moulding around them. It is an unglamorous component that quietly carries everything the machine runs on.\u003c\/p\u003e\u003cp\u003eTerminal blocks fail quietly as well. Vibration from the motor slowly backs a connection off, heat discolours the terminal, and what is left is a high-resistance joint that warms under load and drops power in and out. The symptoms read as something far more serious: a machine that cuts out when the cord is moved, a burning smell around the body, intermittent running that resolves itself the moment you go looking for it. A block showing scorch marks, browned plastic or a cracked body is a replacement item, not something to re-tighten and hope for. A new block puts the pair of conductors back onto clean, tight metal, and the resistance at that junction drops back to where it belongs.\u003c\/p\u003e\u003cp\u003eBecause the block itself is inexpensive and the labour to reach it is the same whether you replace it or merely inspect it, most people who have the machine open change it anyway. It is also worth remembering that a block is only ever as good as the conductors landing in it: a terminal that has already cooked once has usually taken the insulation and the copper with it, and replacing the block without dressing the wire ends back to clean metal simply hands the new part the same problem.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 370 series machines and the SEBO DUO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e two-wire terminal block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e ties a pair of conductors into one insulated junction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the block is scorched, cracked, or no longer holds a tight connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 502\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnplug the machine before going anywhere near it, note which conductor lands where, and trim back any wire ends that have gone dark before reconnecting. If the fault turns out to be switching rather than the junction, the two-pole power switch shared by the DUO and the X and G series machines is SEBO 5113. Genuine SEBO 370 series terminal block, DUO wiring repair part 502, ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214489837818,"sku":"502","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/167b08e65960fd8346675667fd3442cf.jpg?v=1786671113"},{"product_id":"brush-housing-for-duo-light-gray","title":"SEBO Brush Housing for the DUO — Light Gray","description":"\u003cp\u003eLight gray moulding forms the brush chamber of the SEBO Duo, and 3001HG is the factory replacement for it. The housing holds the brush assembly in position and shapes the space it works in, so its condition decides whether the brushes meet the floor evenly across their full width. SEBO supplies the Duo brush machine itself in light gray under 9401AM, and this housing is moulded in the same finish, which is why a replacement blends in rather than announcing itself.\u003c\/p\u003e\u003cp\u003eThe Duo parts diagram lists the brush housing at position 31, between the bearing block RH at 30, part 3010HG, and the handle stop spring block at 32, part 3032. Cracked mounting bosses are the usual reason one gets changed. The housing still looks serviceable from above, but the brush now sits at a slight angle, working hard on one side and skimming on the other; impact damage at the corners has the same effect. A housing that has been dragged over a threshold enough times can also lose its seating faces, and then no amount of retightening keeps the assembly square.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3001HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 31 on the Duo parts sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolds:\u003c\/strong\u003e the brush assembly and the chamber around it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 3005ER brush roller at 27, 3002SW base plate at 28, 3010HG bearing block RH at 30, 3074HG bearing block LH at 69\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners:\u003c\/strong\u003e screws 0112 and 0129 appear in this area of the drawing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWith the machine this far apart, most owners take the chance to check the brush rollers and the drive before closing it up, since both are exposed once the housing is off. Anyone searching for a SEBO brush housing, a Duo brush chamber or part 3001HG is looking at this component. Genuine SEBO housing from an authorized dealer, shipping in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214493278458,"sku":"3001HG","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/06db63b801506345a532354ef4242f7a.jpg?v=1786670820"},{"product_id":"cable-hook-for-duo-light-gray","title":"SEBO Cord Hook for the Duo, Light Gray","description":"\u003cp\u003eCord storage on the Duo brush machine depends on this hook. SEBO 3118HG is the light gray cable hook shown at position 17 on the Duo parts diagram, mounted on the handle tube listed at 16, and it is the anchor the power cord wraps around whenever the machine is parked.\u003c\/p\u003e\u003cp\u003eHooks fail in two places. Either they snap clean off at the base, where the moulding is thinnest and the leverage highest, or the tip wears round until it no longer holds a wrap. Neither is dramatic on the day it happens, but the consequence is. Once the coil slides free, the cord ends up trailing across the floor between jobs, where it gets stepped on, run over, kinked at the strain relief and eventually damaged badly enough to need the power cord itself replaced - a far larger repair than the hook that caused it. A new hook gives the wrap something firm to bite on and keeps the cord clear of the wheels and the brush. It is a small moulding and a quick fit, which is the argument for dealing with it as soon as the first crack appears rather than after the cord has taken the damage. Colour matters for anyone matching the machine: this is the light gray version.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3118HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 17 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e anchors the coiled power cord for storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the hook is cracked at its base or the cord no longer stays wound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated Duo handle parts:\u003c\/strong\u003e power cord 5433DG, handle connector 3113HG, cable clamp 1030UL\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO component supplied through an authorized dealer and shipped in 2-5 business days. Whether the search was for a Duo cable hook, a SEBO cord hook or part 3118HG, this is it.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214493540602,"sku":"3118HG","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/ac8d906abbe74ab0caeabed11eac585c.jpg?v=1786670909"},{"product_id":"clip-for-duo","title":"SEBO Retaining Clip for the Duo","description":"\u003cp\u003eSmall retaining clips do unglamorous work and are almost never the reason anyone opens a machine, yet they are frequently the reason it has to be opened twice. SEBO 3071 is the clip that holds mating components together inside the Duo brush machine, drawn at position 64 on the Duo parts diagram between the pulley 3018 at 63 and the end plate 3040 at 65. One clip is supplied, not a kit.\u003c\/p\u003e\u003cp\u003eVibration and years of handling take the spring out of a moulded clip. It relaxes first, so it still looks correct but no longer pulls the joint tight, and then it splits at the point where it flexes. Once that happens, whatever it was holding gains a small amount of freedom to shift, rattle or work loose while the machine is running, and the noise that results is usually blamed on something larger further along the drive. A factory clip puts positive tension back into the joint, and because it snaps into its original location it normally goes in without tools. Anyone already inside the drive group for a belt, a bearing block or the end plate should have a spare clip to hand, since an old one that has been prised off rarely goes back with quite the same grip it had before.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3071\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 64 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e one clip, supplied singly rather than as a kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e snaps back into the original location, usually with no tools\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeighbouring parts:\u003c\/strong\u003e pulley 3018 at position 63, end plate 3040 at position 65\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOrdered through an authorized SEBO dealer and shipped in 2-5 business days. Searches for a Duo retaining clip, a SEBO clip or part number 3071 all arrive at this listing.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214511300858,"sku":"3071","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/6f02d6ac868fed467ef60d2c2a8d84cb.jpg?v=1786670901"},{"product_id":"handle-cable-contact-cover-for-duo","title":"SEBO Handle Cable Contact Cover for the Duo","description":"\u003cp\u003eSnap a cracked cover off the Duo handle and a live cable termination is looking straight back at you. Part 1020UL is the moulded SEBO cover that closes that junction again, holding the cable contact enclosed where the lead enters the handle.\u003c\/p\u003e\u003cp\u003eSEBO lists it at position 21 on the Duo parts sheet as the contact cover. Covers tend to go one of two ways: brittle with age and split along a mounting boss, or simply lost during an earlier service and never put back. Either state leaves the connection open to dust and to knocks, and that is precisely how an intermittent contact begins its career. Fits the SEBO Duo Machine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e SEBO 1020UL, handle cable contact cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO Duo Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 21 on the SEBO Duo sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEncloses:\u003c\/strong\u003e the cable contact point where the lead meets the handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorth checking while it is off:\u003c\/strong\u003e the terminals for browning or heat marks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated:\u003c\/strong\u003e 1030UL, the cable clamp used on the Duo and several other SEBO models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the cover is cracked at a boss, rattling loose, or absent altogether\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e moulded plastic, shaped to the handle it closes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompare the new cover against the handle before fixing it down, so the cable sits in its channel rather than being trapped as the cover is pressed home. Order 1020UL if the cover on a Duo is cracked, loose or missing altogether, and refit it before the machine goes back into service rather than after. A cover is a small moulding, but on a floor machine dragged across grit and knocked into skirting boards it is the only thing standing between the mains contact and the outside world.\u003c\/p\u003e\u003cp\u003eGenuine SEBO Duo handle parts, ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214515101946,"sku":"1020UL","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/78838f7117583acd63de3fe2bd9699b6.jpg?v=1786670805"},{"product_id":"neck-cover-for-duo-light-gray","title":"SEBO Swivel Neck Cover in Light Gray for the Duo","description":"\u003cp\u003ePosition 47 on SEBO's Duo parts drawing is a small light gray cover, and part 2022HG is it. The neck cover closes over the swivel joint where the handle meets the machine on the SEBO Duo, finishing the pivot and keeping it enclosed.\u003c\/p\u003e\u003cp\u003eIts job sounds modest and is not. Once the cover has split or gone missing, the joint sits open to fluff, hair and grit, all of which end up somewhere they were never meant to be. Broken retaining tabs also have a habit of taking their neighbours with them: with one tab gone the remaining ones carry more strain each time the cover is flexed, and the failure spreads across the moulding rather than staying where it started. A cover held on by half its clips rattles, then works loose, then disappears.\u003c\/p\u003e\u003cp\u003eRefitting the correct part puts the joint back under wraps and tidies the machine at the same time. Light gray is the finish specified here, so match it against the machine before ordering. The cover comes away and goes back without touching anything mechanical inside the neck, which makes this one of the more straightforward repairs on the Duo.\u003c\/p\u003e\u003cp\u003eBeing able to quote a diagram position helps when identifying the part, since a machine of this age carries several small covers and they are easy to confuse in a photograph. Item 47 on the SEBO Duo exploded view is the swivel neck cover, and 2022HG is the light gray version of it. That is the number to quote when searching for a SEBO Duo neck cover, a Duo swivel joint cover, or a genuine SEBO Duo replacement cover in light gray.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 2022HG, SEBO swivel neck cover\u003c\/li\u003e\n\u003cli\u003eColour: light gray\u003c\/li\u003e\n\u003cli\u003eFits: SEBO Duo\u003c\/li\u003e\n\u003cli\u003eDiagram position: 47 on the SEBO Duo parts sheet\u003c\/li\u003e\n\u003cli\u003eFunction: encloses and finishes the swivel joint between handle and machine\u003c\/li\u003e\n\u003cli\u003eReplace when: the cover is cracked, missing, rattling, or has lost its retaining tabs\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO part; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214515527930,"sku":"2022HG","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/9223e9cafe516502048f10317e1ce3ce.jpg?v=1786670809"},{"product_id":"cover-for-duo","title":"SEBO Housing Cover for the DUO","description":"\u003cp\u003eHousing panels take the knocks on a SEBO Duo, and this one, part 3004SE, is the cover SEBO lists at position 39 on the Duo diagram. It closes off a section of the body, keeping dust away from what sits behind it and giving the machine back its finished outline. On the drawing it falls between the AM4 x 30 screw at 38, part 0176TL, and the spacer washer at 41, part 0149, in the group around the 120 V motor at 34 and the drive belt at 37.\u003c\/p\u003e\u003cp\u003eA cover with a broken tab tends to buzz against the body in use, while one that is missing entirely leaves an opening where fluff gathers on the parts underneath. Neither fault stops the machine running, which is why the job gets postponed and why the covered components are usually filthy by the time the panel is finally renewed. Cleaning that area out before the new cover goes on is half the value of the repair. Broken clips are the most common single reason for ordering one: the panel itself is intact, but it no longer holds against the body and works loose again within a few passes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3004SE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 39\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e body panel enclosing a section of the machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearby on the diagram:\u003c\/strong\u003e 3049ER motor at 34, 3038 drive belt at 37, 0176TL screw at 38, 0149 spacer washer at 41\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e as a single panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn removal:\u003c\/strong\u003e keep track of which fastener came from where\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBecause the drive sits behind this panel, a cover that comes off for any reason is a good moment to look over the belt and the motor pulley rather than closing everything up and coming back to it later. Anyone searching for a SEBO Duo cover, a Duo housing panel or part 3004SE has found the right listing. Factory SEBO part from an authorized dealer, shipping in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214515724538,"sku":"3004SE","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/82ad3754c1bd1dc178343abf8e1bdaec.jpg?v=1786670826"},{"product_id":"handle-connector-cover-for-duo-light-gray","title":"SEBO Handle Connector Cover for the Duo, Light Gray","description":"\u003cp\u003eWhere the handle meets the body of the machine there is a moulded shroud that hides and protects the joint, and part 3027HG is the SEBO replacement for it in light gray. The Duo parts diagram places it at position 19, wrapped around the handle connector at 20, part 3113HG, with the contact cover at 21, part 1020UL, and the 3.9 x 16 screws at 22, part 0103, completing that section of the drawing.\u003c\/p\u003e\u003cp\u003eThis is the part that takes knocks against door frames and furniture legs, so cracks, deep scuffs and broken clips are ordinary wear rather than a fault. A split cover leaves the connection open to dust and lets the joint rattle as the handle moves, and once a clip has gone the cover works loose a little further with every pass. Fitting a new one closes the joint back up and tidies the most visible junction on the machine, which is why it is one of the more frequently ordered cosmetic parts for the Duo.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3027HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 19 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 3113HG handle connector at 20, 1020UL contact cover at 21, 0103 screw at 22, 3118HG cable hook at 17\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSEBO does list the handle complete as 3122\/H, which covers positions 1 to 21 in one item, but a cracked shroud rarely justifies that route on its own. If the handle is coming apart anyway, the cable hook 3118HG and the handle grip 3142HG are in the same area and worth checking while access is easy. Anyone searching for a SEBO Duo handle cover, a handle connector shroud or part 3027HG has found the right listing. Genuine SEBO part from an authorized dealer. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214515790074,"sku":"3027HG","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/4d0f9e07233f8e343f6668be18a804bc.jpg?v=1786670851"},{"product_id":"handle-grip-with-grommet-and-switch-cap-holder-for-duo-light-gray","title":"SEBO Handle Grip with Grommet and Switch Cap Holder for the Duo, Light Gray","description":"\u003cp\u003eThree components arrive together here. SEBO 3142HG is the light gray handle grip for the Duo brush machine, and it comes with its cable grommet and the holder for the switch cap already included. The grip itself is item 11 on the Duo parts diagram, at the very top of the machine, and it is the hand-hold the operator steers with.\u003c\/p\u003e\u003cp\u003eGrips take constant hand pressure and eventually show it. The moulding crazes around its fixings, the surface goes slippery under the palm where the texture has polished away, and the grommet loosens where the cable passes through, which lets the wiring move against a plastic edge every time the handle is worked. That last one matters more than it sounds, because a chafed handle cable turns into an intermittent machine. Buying the grip as a set saves tracking down the two smaller pieces separately when the whole top of the handle is being refreshed at once, and it means the grommet going back in is a new one rather than the tired item that was already letting the cable move. The switch cap itself is not part of this pack and carries its own number.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3142HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 11 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the pack:\u003c\/strong\u003e handle grip, cable grommet and switch cap holder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated Duo parts:\u003c\/strong\u003e switch cap 3137GS, handle cable 3125, mounting clamp 5352HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhole-handle option:\u003c\/strong\u003e 3122\/H, the complete Duo handle with cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO assembly supplied by an authorized dealer and shipped in 2-5 business days. This listing answers to a Duo handle grip, a SEBO handle grommet or the part number 3142HG.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214528864506,"sku":"3142HG","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/56b6ca88535ba2f3c2c66a39cc9f741e.jpg?v=1786670927"},{"product_id":"ball-bearing-626-2z-for-duo","title":"SEBO 626-2Z Shielded Ball Bearing for the DUO","description":"\u003cp\u003eA bearing announces itself well before it fails: first a rumble you notice only in a quiet room, then a whine that rises with speed, then real drag. The 626-2Z is the shielded ball bearing used inside the SEBO DUO, listed here as part 222.\u003c\/p\u003e\u003cp\u003eThe 626 designation fixes the size, and the 2Z suffix means it is shielded on both faces, with metal covers keeping the grease in and dust out. That is exactly the specification a floor machine needs, because the working environment is full of the fine grit that destroys an open bearing. It carries a rotating shaft inside the DUO.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO DUO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing:\u003c\/strong\u003e 626-2Z, shielded on both sides\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e carries a rotating shaft within the machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResult:\u003c\/strong\u003e quiet rotation and less strain on the drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e press it squarely into its seat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e one bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder as:\u003c\/strong\u003e SEBO part 222\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs the grease dries out and the races begin to pit, the shaft turns rough, runs hot and loads everything driving it. Spin the shaft by hand with the machine unplugged: a good bearing feels glassy and coasts, a tired one feels gritty, notchy or tight. Fitting a new bearing at the first change in noise costs a great deal less than replacing the components a seized one takes with it.\u003c\/p\u003e\u003cp\u003eFit it with clean hands into a clean seat. Grit trapped between the outer race and its housing stops the bearing seating fully square, and a bearing sitting even slightly cocked in its bore will run hot and fail early however good it was in the box.\u003c\/p\u003e\u003cp\u003ePress it home squarely, on the outer race rather than the inner, and support the housing while you do it. Searches for a SEBO DUO bearing, a 626-2Z shielded bearing or genuine SEBO part 222 end here. Supplied by an authorized dealer.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214530863354,"sku":"222","price":12.0,"currency_code":"USD","in_stock":true}]},{"product_id":"cable-clamp-for-felix-softcase-370-series-and-duo","title":"SEBO Power Cord Cable Clamp for FELIX, CE12 Softcase, 370 Series and Duo","description":"\u003cp\u003eStrain relief is what stops a tug on the power cord from reaching the terminations inside the machine, and on these SEBO models that duty falls to a single moulded clamp. Part 1030UL is the replacement: it holds the cord on its intended path and absorbs the load before the conductors ever feel it.\u003c\/p\u003e\u003cp\u003eSEBO shows the clamp at position 170 on the SOFTCASE CE12 sheet, listed there as the strain relief. Once it cracks or loses its grip the cord is free to move at the entry point, chafing its jacket against the housing edge and pulling directly on the internal connections, which turns a minor moulding into the cause of a much larger repair. It is catalogued for the SEBO FELIX Premium, FELIX 2 Premium, CE12 Softcase, 370 COMFORT, ELECTRONIC 370 and the Duo Machine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e SEBO 1030UL, cable clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e FELIX Premium, FELIX 2 Premium, CE12 Softcase, 370 COMFORT, ELECTRONIC 370 and Duo Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 170 on the SOFTCASE CE12 sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e anchors the mains cord and keeps it clear of moving parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the clamp is cracked, the cord slides through it, or the jacket shows wear at the entry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated:\u003c\/strong\u003e 1035GS and 1035SW, the grommets at the FELIX handle cord entry; 1020UL, the Duo contact cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSits at:\u003c\/strong\u003e the point where the mains cord enters the machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptoms:\u003c\/strong\u003e a cord that slides in and out of the housing, or shows wear in one spot near the entry\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInspect the cord jacket at the clamp point while the housing is open, because chafing there is reason enough to renew the cord as well as the clamp. Authorized SEBO dealer stock, allow 2-5 business days for dispatch.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214531223802,"sku":"1030UL","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/80784a63557d71eeff2f96bb56ca265e.jpg?v=1786668765"},{"product_id":"clamp-for-ball-bearing-for-duo","title":"SEBO Ball Bearing Clamp for the Duo","description":"\u003cp\u003eA ball bearing stays where it belongs only for as long as something holds it there, and on the Duo that job falls to this clamp. Part 3030 is SEBO's retainer for the bearing, marked at position 52 on the machine's parts diagram between the motor pulley at 51, part 3014, and the pulley at 53, part 3013.\u003c\/p\u003e\u003cp\u003eA clamp that has splayed, cracked or lost its grip lets the bearing creep in its seat. What follows is play in the shaft, a bearing that runs hot, and eventually damage to the housing that is a far larger job to put right than the retainer itself. The early sign is a fine rocking movement at the shaft end that was not there before, usually noticed when the drive is turned over by hand rather than under power. A clamp that has been off and refitted several times is also worth renewing on principle, since the grip is the whole of what it does and a retainer that has been sprung open once tends not to close down as tightly again.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 52 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e retains the ball bearing in its seat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 0222 ball bearing 626-2Z at 58, 3014 motor pulley at 51, 3013 pulley at 53, 3010HG bearing block RH at 30\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSEBO lists the bearing itself as 0222, a 626-2Z, at position 58 of the same drawing. If that bearing is being replaced, fitting a fresh clamp at the same time is sensible insurance and saves opening the drive twice for two small items. Searching for a SEBO Duo bearing clamp, a bearing retainer or part 3030 brings up this same component. Genuine SEBO spare, dispatched by an authorized dealer in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214531682554,"sku":"3030","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/54a4d4f42247049bbd99c74674e6e02a.jpg?v=1786670858"},{"product_id":"locking-washer-single-for-x1-x2-x4-x5-370-electronic-et-c-and-duo","title":"SEBO Locking Washer for X1, X2, X4, X5, 370 ELECTRONIC, ET-C and DUO — Single","description":"\u003cp\u003eVibration is what loosens a fastener, and a locking washer is what argues with it. Part 141 is the SEBO locking washer used on the X1, X2, X4 and X5 uprights, on the ET-C power head, and on the 370 ELECTRONIC and the DUO. It is supplied one at a time, so order the count your repair actually calls for rather than a pack you will not finish.\u003c\/p\u003e\u003cp\u003eThe washer sits under a screw head or against a shoulder and keeps tension in the joint long after the driver has come off. That stored spring is what holds a fastening still against the constant buzz of a suction motor and a turning brush roller. Once the washer has flattened it stops biting, and whatever it holds — an axle, a screw, a bracket — gives up a fraction of a turn with every pass across the carpet until something is visibly loose.\u003c\/p\u003e\u003cp\u003eFit a fresh one when you find a screw finger-tight that you know was torqued down, when a wheel or roller axle has picked up side play, or when a panel keeps rattling however often you go back to it. Any washer that comes out already squashed flat has done its work and should not go back in, so it is worth renewing every one you disturb while the machine is open.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO X1, X2, X4 and X5 uprights, the ET-C power head, the 370 ELECTRONIC and the DUO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e holds tension in a threaded joint so it cannot back off under vibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e one washer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e drops straight into the original position with no modification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder as:\u003c\/strong\u003e SEBO part 141\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is the listing to use whether you searched for a SEBO locking washer, an X5 locking washer replacement or simply genuine SEBO 141. Check the model on the data plate first, then count the positions you intend to service. Genuine SEBO hardware, shipped in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214532993274,"sku":"141","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0141.jpg?v=1709348432"},{"product_id":"locking-washer-10-pack-for-x1-x2-x4-x5-370-electronic-et-c-and-duo","title":"SEBO Locking Washer for AUTOMATIC X1, X2, X4, X5, ELECTRONIC 370, ET-C and Duo — 10 Pack","description":"\u003cp\u003eTen locking washers is roughly what a full brush-housing rebuild consumes, once you accept that none of the old ones should go back in. Part 0141ER is the ten-pack of the washer SEBO uses on the AUTOMATIC X uprights, the ELECTRONIC 370, the ET-C power heads and the Duo — identical to the single listed as 0141, bagged for anyone who opens these machines more than once.\u003c\/p\u003e\u003cp\u003eThese washers work by spring tension rather than friction. Compressed under a fastener head or a retaining collar, they push back and stop the fastener creeping round under the vibration that a running brush roll feeds into the chassis. That tension is a one-time asset. A washer removed from a machine has already given it up, and the flattened original going back in is why a repaired axle or bracket develops play again within weeks rather than years. Keeping a bag in the drawer also means the correct washer is at hand at the moment the machine is open, which is when the decision to reuse or replace actually gets made.\u003c\/p\u003e\u003cp\u003eBuying by the pack is what makes that discipline practical. A single upright strip-down turns up half a dozen of these at once, and a bag on the shelf removes the temptation to salvage. The usual prompts to order a SEBO locking washer replacement are a knocking brush-roll end, a cover screw found loose, or a collar that has started to walk along its shaft.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSEBO part 0141ER — locking washer, ten per pack\u003c\/li\u003e\n\u003cli\u003eFits SEBO AUTOMATIC X1, AUTOMATIC X2, AUTOMATIC X4, AUTOMATIC X4 Boost and AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003eAlso fits the ELECTRONIC 370, the ET-C power heads and the Duo\u003c\/li\u003e\n\u003cli\u003eSprung form; treat as a replace-on-assembly item rather than something to reuse\u003c\/li\u003e\n\u003cli\u003ePack: ten washers. Singles are stocked as 0141\u003c\/li\u003e\n\u003cli\u003eOther bagged hardware in the same group: flat washer 3.2 (0143ER), C clip (0161), screw 4 x 12 (0129ER)\u003c\/li\u003e\n\u003cli\u003eReplace when: a cover screw is found finger-loose, a bracket knocks, or a collar has started to walk along its shaft\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO part from an authorized dealer; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214533026042,"sku":"0141ER","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/d8880b3926ce6c1bf56c62f4b67319ee.jpg?v=1786667973"},{"product_id":"bridge-for-duo","title":"SEBO Bridge for the Duo Drive Assembly","description":"\u003cp\u003eSEBO calls part 3039 the bridge, and the Duo parts diagram puts it at position 60 - almost exactly halfway through the numbered drive group that runs from the motor pulley 3014 at 51 through to the pulley 3056 at 72. It is a structural member rather than a moving one, tying that section of the assembly together so the shafts and pulleys either side of it keep their relationship to each other.\u003c\/p\u003e\u003cp\u003eBecause it holds other components in relation to one another, a bridge that has cracked or distorted does not fail on its own account. It lets the shafts 3035 and 3037, the gear wheels 3021 and 3022 and the pulleys around them drift out of alignment, and what the owner hears is a machine that has become noisy for no reason anyone can point at. Wear then accelerates on parts that were perfectly serviceable until the geometry shifted. Order by the diagram position rather than by the name, since bridge is a generic description across many parts catalogues and the number is what actually identifies this one. It is supplied as a single moulding, ready to fit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3039\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 60 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e structural member holding the drive group in alignment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeighbouring parts:\u003c\/strong\u003e pulley 3015 at position 59 and right-hand shaft 3035 at position 61\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso in the group:\u003c\/strong\u003e clip 3071, end plate 3040, spacer 3036, ball bearing 0222\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA SEBO Duo bridge, a Duo drive assembly bridge and SEBO part 3039 are all the same component and all point here. Genuine SEBO spare supplied through an authorized dealer, shipping in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214533812474,"sku":"3039","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/73cf96481401db5d62e09234c9cc11b3.jpg?v=1786670881"},{"product_id":"handle-connector-for-duo-light-gray","title":"SEBO Handle Connector for the Duo, Light Gray","description":"\u003cp\u003eEvery push, pull and lift on a Duo brush machine loads the joint where the handle meets the body, and SEBO 3113HG is the connector that forms it. The light gray moulding is item 20 on the Duo parts diagram, immediately after its own cover 3027HG at position 19 and immediately before the contact cover 1020UL at 21.\u003c\/p\u003e\u003cp\u003ePlastic that has flexed for years develops hairline cracks around its fixing points, usually starting at a screw boss where the load concentrates. The first sign is a handle with slightly too much play in it, the kind of looseness that is easy to attribute to a screw needing a turn. Left alone, the connector breaks through and the handle stops steering the machine cleanly, at which point the cable running through the joint is taking strain it was never meant to carry. Fitting a new connector returns a solid, rattle-free link between the two halves and takes that load off the wiring. The 3.9 x 16 screws used in this part of the handle are listed at position 22 as 0103, available singly or as a ten pack, and they are worth renewing at the same time if the old ones have chewed their threads on the way out.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3113HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 20 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e handle play, wobble, or a cracked mounting boss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits with:\u003c\/strong\u003e handle connector cover 3027HG, contact cover 1020UL, screws 0103\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhole-handle option:\u003c\/strong\u003e 3122\/H, the complete handle with cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO part from an authorized dealer, shipping in 2-5 business days, covering searches for a Duo handle connector, a SEBO handle repair part or the number 3113HG.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214533845242,"sku":"3113HG","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/befb3775416e61ae6f3b291196c03b88.jpg?v=1786670907"},{"product_id":"storage-tray-for-duo-light-gray","title":"SEBO Storage Tray for the Duo, Light Gray","description":"\u003cp\u003eCracked and missing trays are among the more ordinary casualties on a machine that spends its life being carried between rooms. Part 3033HG is the SEBO storage tray for the Duo in light gray, shown at position 25 of the parts diagram, just past the complete handle at 23, part 3122\/H, and ahead of the bumper at 26, part 2007HG.\u003c\/p\u003e\u003cp\u003eNothing about the tray touches the drive or the brush, so a broken one does not stop the machine working. What it does mean is that whatever normally travels with the Duo no longer has a place to sit, and the remaining plastic tends to snag and split further from there once an edge has gone. Replacing it is a straightforward job that restores the machine to its original configuration, and the light gray moulding matches the finish SEBO supplies the Duo in under 9401AM, so a replacement does not stand out against the rest of the body. Colour is worth confirming when ordering, since the Duo's exterior parts are catalogued by finish as well as by position.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3033HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 25 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 3122\/H handle complete at 23, 2007HG bumper at 26, 3055HG spot cleaning brush at 10, 5352HG mounting clip at 14\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe small items that go out with a Duo have their own numbers if any have gone astray alongside the tray: the spot cleaning brush is 3055HG, its mounting clip with screw is 5352HG, and the DUO-P large hand brush is 6392. Searching for a SEBO Duo tray, a Duo storage tray in light gray or part 3033HG all lead to this listing. Genuine SEBO part supplied by an authorized dealer. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214534729978,"sku":"3033HG","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/38f360b34bc5620bf70c268b24ba2727.jpg?v=1786670864"},{"product_id":"screw-c-3-9-x-16-din-7981-single-for-x-series-felix-series-g-series-370-series-et-c-and-duo","title":"SEBO Screw C 3.9 x 16 (DIN 7981) for X, FELIX, G and 370 Series, ET-C and DUO","description":"\u003cp\u003eStep up from the 2.9 mm screws and you reach the 3.9 mm size, used where a joint carries load rather than simply holding a cover shut. SEBO lists the C 3.9 x 16 to DIN 7981 across the X, FELIX and G series machines, the 370 series, the ET-C power head and the DUO, and supplies it individually as part 103. The DIN 7981 form is a cross-recessed pan head on a self-tapping thread.\u003c\/p\u003e\u003cp\u003eA loose screw in a load-bearing position does not stay a small problem. The hole elongates as the joint works, the moulding flexes at every push of the machine, and the crack that follows turns a fastener job into a housing job. The early warning is a panel that has begun to move under hand pressure at one corner, long before anything is audible.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 103\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO X, FELIX and G series machines, the 370 series, the ET-C power head and the DUO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e C 3.9 x 16 to DIN 7981\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead and drive:\u003c\/strong\u003e cross-recessed pan head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3.9 mm diameter, 16 mm long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther lengths in the same family:\u003c\/strong\u003e part 102 at 13 mm, part 105 at 19 mm and part 104 at 25 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTighten to firm hand pressure only, since the thread is cut in plastic and will not take a torque setting meant for metal. If the replacement spins without pulling down, the boss rather than the screw has failed, and moving up to a longer screw only splits the moulding further along.\u003c\/p\u003e\u003cp\u003eThis is the fastener behind searches for a SEBO FELIX chassis screw, a SEBO 370 series body screw, a DIN 7981 3.9 x 16 replacement or a genuine SEBO 103. Take a moment to match the length against the one you removed, because all four screws in this family carry the same head. Genuine SEBO part from an authorized dealer, dispatched in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214535549178,"sku":"103","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0103.jpg?v=1709348785"},{"product_id":"screw-c-3-9-x-19-din-7981-single-for-k-series-370-electronic-and-duo","title":"SEBO Screw C 3.9 x 19 (DIN 7981) for K Series, 370 ELECTRONIC and DUO","description":"\u003cp\u003eBetween the 16 mm and 25 mm versions sits this one, the C 3.9 x 19 to DIN 7981, which SEBO specifies for the K series, the 370 ELECTRONIC and the DUO. It is sold singly under part number 105. Like the rest of the DIN 7981 family it carries a cross-recessed pan head on a self-tapping thread, cutting its own path into the moulded boss and needing no nut behind the joint.\u003c\/p\u003e\u003cp\u003eWhen a screw in this size backs out, the shell it holds begins to move at the seam, and that movement then works on the fasteners either side of it until one loose screw has quietly become four. The symptom starts as a click or a creak as the machine changes direction rather than as anything dramatic. Catching it early keeps the repair down to a single part instead of a panel with four ruined bosses.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 105\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO K series, the 370 ELECTRONIC and the DUO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e C 3.9 x 19 to DIN 7981\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead and drive:\u003c\/strong\u003e cross-recessed pan head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3.9 mm diameter, 19 mm long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeighbouring lengths:\u003c\/strong\u003e part 103 at 16 mm and part 104 at 25 mm, plus part 102 at 13 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf the hole has opened up rather than the screw failing, the repair belongs to the housing and not to a longer fastener. Driving a 25 mm screw into a seat sized for 19 mm simply moves the damage deeper. Check the length you removed against the specification above, since the four screws in this family are identical above the thread.\u003c\/p\u003e\u003cp\u003eTighten to firm hand pressure and stop there. The thread this screw cuts is in plastic, not metal, and it will accept far more turning force than the boss around it can survive. The characteristic sound of that mistake is a short creak followed by a screw that suddenly turns freely, at which point the fastener is no longer the part that needs replacing.\u003c\/p\u003e\u003cp\u003eOrder this one when searching for a SEBO K series body screw, a SEBO 370 ELECTRONIC casing fastener, a DUO 3.9 x 19 replacement or a genuine SEBO 105. Genuine SEBO hardware supplied by an authorized dealer, shipping in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214535844090,"sku":"105","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0105.jpg?v=1709348788"},{"product_id":"screw-3-9-x-13-din-7981-a2-single-for-duo","title":"SEBO Stainless A2 Screw 3.9 x 13 (DIN 7981-A2) for DUO","description":"\u003cp\u003eThe A2 suffix is the whole story here. This 3.9 x 13 is made in A2 stainless steel instead of the plated steel used for most SEBO fasteners, and it is the screw SEBO specifies for the DUO, where an ordinary one would be exposed to moisture. The form is otherwise the familiar DIN 7981 shape, a cross-recessed pan head on a self-tapping thread, so it fits and drives exactly like its plated equivalent.\u003c\/p\u003e\u003cp\u003eCorrosion does more than spoil the look of a fastener. Rust expands in the thread and locks the screw into the plastic around it, so the next attempt at removal either shears the head off or tears the boss out along with the screw. Stainless keeps the joint serviceable years later, which matters most on screws that only ever come out during a repair and are therefore left undisturbed for the longest.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 106\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO DUO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e A2 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e 3.9 x 13 to DIN 7981-A2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead and drive:\u003c\/strong\u003e cross-recessed pan head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlated-steel screw of the same size:\u003c\/strong\u003e part 102, an F 3.9 x 13 to DIN 7981\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDo not substitute a plated steel screw of the same size in this position, however well it fits. The dimensions are identical and the service life is not. Replace one when the head has rounded, when it no longer holds torque, or simply while the area is open for other work, since fitting it takes no longer than refitting the old one.\u003c\/p\u003e\u003cp\u003eTelling the two apart on the bench is straightforward once you know to look. A2 stainless has a duller, greyer surface than bright zinc plating and carries no plating to flake away at the edges of the recess. If a screw removed from this position shows rust staining around its head, it was not the correct part and the seat underneath is worth inspecting before anything new goes into it.\u003c\/p\u003e\u003cp\u003eThis listing answers searches for a SEBO DUO stainless screw, a DIN 7981-A2 3.9 x 13 replacement, a SEBO corrosion-resistant fastener and a genuine SEBO 106. Genuine SEBO part from an authorized dealer, shipping in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214535942394,"sku":"106","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0106.jpg?v=1709348756"},{"product_id":"screw-am4-x-10-din-7985-single-for-duo","title":"SEBO Machine Screw AM4 x 10 (DIN 7985) for DUO","description":"\u003cp\u003eTen millimetres of M4 machine thread, listed by SEBO for the DUO. A short machine screw like this holds a component onto a threaded seat where there is no room for anything longer, and part 112 replaces the original exactly, in the DIN 7985 cross-recessed pan head form the machine was built with.\u003c\/p\u003e\u003cp\u003eThe advantage of a machine thread over a self-tapping one is repeatability. It can come out and go back through service after service without wearing its seat away, which is why SEBO uses this type at points that are opened deliberately rather than once in the life of the machine. What finishes it instead is a burred or bent thread, usually from being started crooked, and no amount of force will make that version pull down square.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO DUO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e AM4 x 10 to DIN 7985\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead and drive:\u003c\/strong\u003e cross-recessed pan head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M4 machine thread, 10 mm long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonger M4 screw to the same standard:\u003c\/strong\u003e part 1010 at 16 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompare the thread of the old screw with the new one before fitting, and give the seat it goes into the same attention, because a damaged female thread will ruin a fresh screw on the first pass. If the replacement will not start with light finger pressure, stop and clear the thread rather than driving through the resistance.\u003c\/p\u003e\u003cp\u003eOrder one when the head has rounded, when the thread will no longer draw the component down onto its seat, or when a fastener has gone missing during a strip-down and the job cannot be closed up without it. Ten millimetres leaves little margin, so substituting a longer M4 screw is not an option here: it bottoms in the seat and holds the part off the surface it should be clamped against.\u003c\/p\u003e\u003cp\u003eLook for this part when searching a SEBO DUO screw, an M4 x 10 machine screw for a vacuum, a DIN 7985 AM4 x 10 replacement or a genuine SEBO 112. Genuine SEBO fastener supplied by an authorized dealer, shipping in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214536892666,"sku":"112","price":6.99,"currency_code":"USD","in_stock":true}]},{"product_id":"screw-m4-x-10-k-single-for-felix-dart-softcase-370-series-300-350-and-duo","title":"SEBO M4 x 10 Screw for FELIX, DART, SOFTCASE, 370, 300\/350 and DUO — Single","description":"\u003cp\u003eA rebuild stops dead over one missing fastener. Part 127 is the M4 x 10 k screw SEBO specifies across a wide slice of its range, sold as a single piece so a one-screw repair does not mean buying a bag of fifty. It carries a metric M4 thread 10 mm long, which is short enough to sit in a shallow seat and still be recovered and refitted at the next service.\u003c\/p\u003e\u003cp\u003eThreads flatten out after a few teardowns, and a screw that no longer holds torque lets the cover it clamps drift loose while the machine is running. The early symptoms are a panel that lifts under a fingernail at one corner and a buzz that appears only at certain motor speeds. Left alone, the loose panel loads the fasteners either side of it and the single-screw repair grows.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 127\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO FELIX and DART, the SOFTCASE, the 370 series, the 300 and 350, and the DUO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M4 x 10 k\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e one screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit:\u003c\/strong\u003e drops into the factory hole, with no drilling or tapping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated M4 screws:\u003c\/strong\u003e part 129 at M4 x 12 to DIN 966 and part 112 at AM4 x 10 to DIN 7985\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHold it against the screw you removed to confirm both head style and length before ordering. Several M4 screws with different heads appear on a single SEBO machine, and while any of them will start in the hole, only the correct one seats the way the design intended. Order more than one if the repair calls for it, since these are supplied individually.\u003c\/p\u003e\u003cp\u003eThe advantage of a metric machine thread in this position is that it survives being taken apart. Where a self-tapping screw wears its own seat away a little on every removal, this one engages a thread that already exists and returns to the same tightness each time, which is why it turns up at the access points a technician opens as a matter of routine rather than once in the life of the machine.\u003c\/p\u003e\u003cp\u003eSearches that lead to this listing include SEBO FELIX M4 screw, SEBO 370 series fastener, SEBO DUO cover screw and genuine SEBO 127. Genuine SEBO hardware supplied by an authorized dealer, shipping in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214537023738,"sku":"127","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0127.jpg?v=1709348814"},{"product_id":"screw-m4-x-12-din-966-single-for-x-series-g-series-and-duo","title":"SEBO M4 x 12 DIN 966 Screw for X Series, G Series and DUO — Single","description":"\u003cp\u003eDIN 966 is the head profile SEBO calls for at this fastening point on the X series, the G series and the DUO. The standard covers a cross-recessed raised countersunk head, the oval-topped form that pulls down into a chamfered seat so the screw finishes flush with a slight dome rather than standing proud. Part 129 is that screw in M4 x 12, supplied singly rather than in a pack.\u003c\/p\u003e\u003cp\u003eStrip one during a brush roll or filter service and the panel it held sits proud, rattles on the next run, or works its way free entirely. Because the head is countersunk, a damaged one also stops centring itself in its seat, so the panel is pulled slightly out of line as the screw is tightened. Driving in the correct M4 x 12 pulls the cover flat again and keeps it there.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 129\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO X-series and G-series uprights, plus the DUO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M4 machine thread, 12 mm long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e DIN 966, cross-recessed raised countersunk head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e sold individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTen-pack version:\u003c\/strong\u003e part 0129ER, the same M4 x 12 DIN 966 screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther M4 x 12 head forms:\u003c\/strong\u003e part 0117ER to DIN 84 and part 0199ER to ISO 7380\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRead what is stamped on the screw you removed and match it before ordering, since several M4 screws with different heads appear on one machine and the thread alone does not identify the part. If the same repair calls for a handful of these, the ten-pack under 0129ER covers it in one order.\u003c\/p\u003e\u003cp\u003eHead form is the detail most easily overlooked on an M4 x 12. A pan head will start and tighten in a countersunk seat, but it bears on the rim of the chamfer instead of down its cone, so the panel is held on a narrow ring and the screw sits high. Ordering by part number rather than by thread size avoids that entirely.\u003c\/p\u003e\u003cp\u003eThis is the listing for searches such as SEBO X series M4 screw, SEBO G series DIN 966 fastener, SEBO DUO countersunk screw and genuine SEBO 129. Genuine SEBO part, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214537122042,"sku":"129","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0129.jpg?v=1709348817"},{"product_id":"screw-am4-x-30-din-7985-single-for-x-g-series-370-comfort-300-350-et-1-et-2-and-duo","title":"SEBO AM4 x 30 Screw, DIN 7985, for X and G Series, 370 COMFORT, 300\/350, ET-1, ET-2 and DUO","description":"\u003cp\u003eAt 30 mm this is the long one. Part 176, an AM4 x 30 screw to DIN 7985, reaches deep through the housing on SEBO's X-series and G-series machines, on the 370 COMFORT, on the 300 and the 350, on the ET-1 and ET-2 power heads, and on the DUO. It is sold individually.\u003c\/p\u003e\u003cp\u003eDIN 7985 is the pan-head cross-recess standard, so the head sits proud and takes a Phillips driver. The reason to order by the full designation is that several M4 screws of different lengths appear on the same machine, often within a few centimetres of each other, and they are not interchangeable — a shorter screw in this hole simply will not reach the material it is meant to be pulling together.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO X series, G series, 370 COMFORT, 300 and 350, the ET-1 and ET-2 power heads, and the DUO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e AM4 x 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e DIN 7985\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e sold individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder as:\u003c\/strong\u003e SEBO part 176\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDeep fastenings such as this one carry more of the clamping load than the short screws around them. Strip the thread here and you are left with an assembly that never quite pulls together no matter how hard everything else is tightened, usually announced by a creak when the machine is picked up or a seam you can open with a thumbnail. If the boss itself has broken up rather than the screw, fitting a new screw alone will not cure it.\u003c\/p\u003e\u003cp\u003eOne designation covering this many machines is a consequence of SEBO reusing a small set of fasteners across the range, which is convenient if you are stocking a workshop drawer rather than repairing a single vacuum. A few spares ordered alongside the part you actually came for are rarely wasted.\u003c\/p\u003e\u003cp\u003eSearches for a SEBO X series screw, an ET-2 housing screw or DIN 7985 M4 x 30 all point here. Keep the old screw for comparison, and note where each length came from before the parts tray gets mixed. Genuine SEBO hardware from an authorized dealer.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214537253114,"sku":"176","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0176.jpg?v=1709348766"},{"product_id":"screw-c-3-9-x-16-din-7981-10-pack-for-x-series-felix-series-g-series-370-series-et-c-and-duo","title":"SEBO 3.9 x 16 Pan Head Screws (DIN 7981) for AUTOMATIC X, FELIX, ESSENTIAL G and 370 — 10 Pack","description":"\u003cp\u003eDIN 7981 is the standard behind this pan head tapping screw, and 0103ER supplies it ten to a pack in the 3.9 mm gauge, 16 mm long, that runs right through the SEBO upright range. Length is the only thing separating it from the near-identical numbers around it in the parts list: 0104 is the 25 mm screw, 0105 the 19 mm and 0107 the slimmer 2.9 mm fastener.\u003c\/p\u003e\u003cp\u003eA tapping screw forms its own thread the first time it is driven home. Repeat that in the same plastic boss often enough and the walls give up, at which point the head keeps turning without ever drawing the panel down. New screws with sharp threads are the easy half of putting that right; the awkward half is a cracked boss, which is what happens when somebody reaches for a thicker screw to take up the slack. Reach for this part number when a cover on an AUTOMATIC X or ESSENTIAL G will not sit flush, when a FELIX handle fixing has worked loose, or when a screw comes out with its threads visibly polished.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 0103ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e ten screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e 3.9 x 16 pan head tapping screw to DIN 7981\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X1, X2, X4, X4 Boost, X5, X7 Premium, X7 Pet and X8; FELIX Premium and FELIX 2 Premium; ESSENTIAL G1, G2, G4 and G5; 370 COMFORT and ELECTRONIC 370; ET-C power heads; and the DUO machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle screw:\u003c\/strong\u003e 0103\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther lengths in the family:\u003c\/strong\u003e 0104 and 0104ER at 25 mm, 0105 and 0105ER at 19 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching washers:\u003c\/strong\u003e 0143 in the 3.2 size, 0141 as a locking washer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRun these in by hand or on a low clutch setting. A tapping screw wants to be driven until the head just meets the surface, and the last fraction of a turn on a power tool is what tears the thread out of the boss it has only just formed. Where that has already happened the screw will spin freely at the end of its travel rather than stopping firmly.\u003c\/p\u003e\u003cp\u003eGenuine SEBO hardware, dispatched in 2–5 business days. Listed for anyone searching a SEBO DIN 7981 screw, an AUTOMATIC X4 case screw pack or part 0103ER by number.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214538170618,"sku":"0103ER","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0103ER.jpg?v=1785144769"},{"product_id":"screw-c-3-9-x-19-din-7981-10-pack-for-k-series-370-electronic-and-duo","title":"SEBO 3.9 x 19 Pan Head Screws (DIN 7981) for AIRBELT K, ELECTRONIC 370 and DUO — 10 Pack","description":"\u003cp\u003eCanister machines take knocks an upright never sees, dragged over thresholds and set down hard on their sides, and the fixings in the body shell wear accordingly. Part 0105ER answers with ten pan head screws in the 3.9 mm gauge at 19 mm long, made to DIN 7981, the size SEBO uses on the AIRBELT K and the DUO.\u003c\/p\u003e\u003cp\u003eWorking through a full pack while the shell is open is worth the few minutes it adds. Any screw driven repeatedly into the same boss has less bite left than it looks, and mixing worn fixings with new ones simply moves the next loose panel along one position. Where a self-tapping screw has already chewed its hole oversize, the replacement will feel soft going in, which is the point to check the boss itself rather than keep tightening. The prompts to reorder are the familiar ones: a rattling body panel, a screw that will not draw down, and heads rounded by a slipping driver.\u003c\/p\u003e\u003cp\u003eSorting matters on a machine that mixes fastener types. The AIRBELT K and DUO both use self-tapping screws in some positions and metric machine screws in others, and the two look similar enough in a tray to be swapped by accident. A tapping screw has a coarse, tapering thread; a machine screw runs uniform to a blunt end.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 0105ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e ten screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e 3.9 x 19 pan head tapping screw to DIN 7981\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AIRBELT K2 KOMBI, K2 TURBO and K3 PREMIUM; ELECTRONIC 370; and the DUO machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle screw:\u003c\/strong\u003e 0105\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther DUO fasteners:\u003c\/strong\u003e 0106ER in A2 stainless, 0112ER in M4 x 10 machine thread\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO fasteners from an authorized dealer, dispatched in 2–5 business days. Covers searches for a SEBO AIRBELT K3 screw set, a DIN 7981 screw 10 pack or part 0105ER.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214538399994,"sku":"0105ER","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/da21df2fc2723493fb835892c443ecf7.jpg?v=1786669924"},{"product_id":"screw-3-9-x-13-din-7981-a2-10-pack-for-duo","title":"SEBO 3.9 x 13 Stainless Screws (DIN 7981-A2) for the DUO Machine — 10 Pack","description":"\u003cp\u003eRebuilding a DUO goes faster with the fixings already sorted, and 0106ER puts ten pan head screws of 3.9 mm gauge and 13 mm length, in A2 stainless, into one pack. That grade is what SEBO specifies for this machine and it is written into the designation as DIN 7981-A2 rather than left to the fitter to decide.\u003c\/p\u003e\u003cp\u003eKeep the stainless ones separate from the plated hardware on the bench. They are the same length and the same thread, so once the two get mixed there is no telling them apart by feel, and the position that wanted stainless quietly ends up with something else in it. The consequence turns up months later as a rust bloom around one screw head while the others stay clean. Replacing the run in one go while the machine is open avoids that, and it also deals with any screw whose thread has been formed once too often in the same boss.\u003c\/p\u003e\u003cp\u003eA2 is the general-purpose austenitic stainless grade, which is what makes it worth a separate part number rather than being treated as an ordinary screw. It resists the moisture and cleaning residue that a plated fastener in the same position would eventually give in to, and it is the reason the specification on this line ends in that suffix.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 0106ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e ten screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e 3.9 x 13 pan head to DIN 7981-A2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e A2 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO DUO machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle screw:\u003c\/strong\u003e 0106\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther DUO packs:\u003c\/strong\u003e 0105ER at 3.9 x 19, 0112ER in M4 x 10, 0127ER in M4 x 10 taptite form\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO fasteners from an authorized dealer; ships in 2–5 business days. This is the listing for a SEBO DUO screw set, a stainless DIN 7981-A2 10 pack or part 0106ER.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214538432762,"sku":"0106ER","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/51f187ce266b995d1f91f2f63ee764f5.jpg?v=1786670793"},{"product_id":"screw-am4-x-10-din-7985-10-pack-for-duo","title":"SEBO M4 x 10 Pan Head Machine Screws (DIN 7985) for the DUO Machine — 10 Pack","description":"\u003cp\u003eRebuilding a SEBO DUO goes badly when one of the small case screws is chewed up or lost in the carpet. Part 0112ER answers that with ten cross-recessed pan head fasteners in M4, 10 mm long, made to DIN 7985, the size the DUO uses to pull its covers and brackets down against the body.\u003c\/p\u003e\u003cp\u003eA rounded head or a cross-threaded shank is usually why a panel refuses to sit flush after a service. Driving a fresh screw lets the bit bite squarely and the fastener reach full clamp instead of turning in a recess it has already worn away. Keep these separate from the tapping screws on the same machine: they look alike at a glance, but only one of the two belongs in a tapped seat, and putting the wrong pattern in ruins the thread rather than the screw. Ten in a pack is enough to redo every fixing of this size while the DUO is open on the bench.\u003c\/p\u003e\u003cp\u003eTelling the two patterns apart takes a moment and saves a component. A machine screw has an even thread of constant diameter running to a blunt end; a tapping screw is coarser and tapers towards a point. The first belongs in a tapped seat or a captive nut, the second in a plain plastic boss, and neither does the other any good.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 0112ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e ten screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e AM4 x 10 cross-recessed pan head machine screw to DIN 7985\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e metric machine thread, not self-tapping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO DUO machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle screw:\u003c\/strong\u003e 0112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther DUO packs:\u003c\/strong\u003e 0106ER in A2 stainless, 0105ER at 3.9 x 19, 0127ER in taptite form\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO hardware from an authorized dealer; ships in 2–5 business days. Covers a SEBO DUO screw set, an M4 x 10 machine screw 10 pack or part 0112ER searched directly.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214538629370,"sku":"0112ER","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1eafc68c3746a599644b9d2ee43cdaae.jpg?v=1786670796"},{"product_id":"screw-m4-x-10-k-10-pack-for-felix-dart-softcase-370-series-300-350-and-duo","title":"SEBO M4 x 10 Taptite Screws for FELIX, DART, SOFTCASE, 370 and 300\/350 — 10 Pack","description":"\u003cp\u003eKeeping ten spares on the bench is the practical way to own a screw this common. Part 0127ER is the same M4 x 10 k taptite as the single 0127, boxed by the ten, and it is the fastener SEBO uses to close housings on the FELIX uprights, the DART, the CE12 Softcase, the 370 machines, the 300 and 350 MECHANICAL and the DUO.\u003c\/p\u003e\u003cp\u003eThread-forming screws cut their own path into a plastic boss, which is excellent once and merely adequate the fourth time the same hole is opened. Anyone who services these machines regularly runs short of M4 x 10s long before anything else fails, so a pack of ten covers several strip-downs without a reorder. The moment to use them is while a housing is already apart: swapping a full run of fixings takes minutes and removes the loose panel, the buzz at full suction and the cover that never quite closes flush.\u003c\/p\u003e\u003cp\u003eBecause the thread is rolled rather than cut, the boss keeps more of its strength than it would with an ordinary self-tapper, but each fresh pass still takes something out of it. That is the argument for fitting new screws to a housing that has been open more than once, and for driving them slowly enough to feel the head seat rather than relying on a clutch to decide.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 0127ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e ten screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e M4 x 10 k, thread-forming taptite pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO CE12 Softcase; FELIX Premium and FELIX 2 Premium; DART; 300 MECHANICAL and 350 MECHANICAL; 370 COMFORT and ELECTRONIC 370; and the DUO machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle screw:\u003c\/strong\u003e 0127\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonger M4 in the range:\u003c\/strong\u003e 0129ER, ten M4 x 12 screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashers for M4 hardware:\u003c\/strong\u003e 0140 singly, 0140ER for ten\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO hardware from an authorized dealer; ships in 2–5 business days. Covers a SEBO taptite screw 10 pack, a FELIX Premium screw set or part 0127ER by number.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214539153658,"sku":"0127ER","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/093e1d396ca817833503dd383de910a2.jpg?v=1786668758"},{"product_id":"screw-m4-x-12-din-966-10-pack-for-x-series-g-series-and-duo","title":"SEBO M4 x 12 Screws (DIN 966) for AUTOMATIC X, ESSENTIAL G and DUO — 10 Pack","description":"\u003cp\u003eTen M4 x 12 screws cover a full chassis strip-down with fasteners left over, which is the case for buying 0129ER rather than picking up singles as each one gives trouble. It is the DIN 966 screw SEBO uses through the AUTOMATIC X and ESSENTIAL G uprights and on the DUO, listed at position 61 in the ESSENTIAL G4\/G5 parts diagram.\u003c\/p\u003e\u003cp\u003eSteel screws driven repeatedly into moulded bosses lose their edge before the housing does. Swapping in new ones as a set, rather than reusing whatever came out, is what keeps a rebuilt machine quiet and free of the faint buzz a half-clamped panel produces. Twelve millimetres is the length to check carefully, since the M4 x 10 sitting beside it in most parts drawers starts just as easily and then falls short of the thread. Anyone servicing several of these machines will get through a pack faster than expected.\u003c\/p\u003e\u003cp\u003eMeasure from under the head when checking an old screw, and count the drive as well: within the M4 hardware on these machines there is a 10 mm and a 12 mm, and the shorter one starts in a 12 mm hole convincingly enough to be fitted by mistake. It reveals itself later as a bracket that will not stay square under load.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 0129ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e ten screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e M4 x 12 screw to DIN 966\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 61 on the ESSENTIAL G4\/G5 parts sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X1, X2, X4, X4 Boost, X5, X7 Premium, X7 Pet and X8; ESSENTIAL G1, G2, G4 and G5; and the DUO machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle screw:\u003c\/strong\u003e 0129\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShorter M4 pack:\u003c\/strong\u003e 0127ER at M4 x 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashers for the ESSENTIAL G:\u003c\/strong\u003e 0140ER, ten per pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO hardware from an authorized dealer; ships in 2–5 business days. Covers a SEBO M4 x 12 screw 10 pack, an ESSENTIAL G chassis screw set or part 0129ER.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214540169466,"sku":"0129ER","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/697e7d9d103e210817f8628648affad3.jpg?v=1786667970"},{"product_id":"screw-am4-x-30-din-7985-10-pack-for-x-and-g-series-370-comfort-300-350-et-1-et-2-and-duo","title":"SEBO AM4 x 30 Screw (DIN 7985) for AUTOMATIC X, ESSENTIAL G, FELIX, AIRBELT and ET Power Heads — 10 Pack","description":"\u003cp\u003eFew SEBO fasteners turn up on as many parts diagrams as the AM4 x 30, which is exactly why 0176ER is worth stocking by the pack. Ten DIN 7985 machine screws in the long M4 length, covering AUTOMATIC X and ESSENTIAL G uprights, FELIX and DART, the 300 and 350 MECHANICAL, the 370 COMFORT, AIRBELT canisters, the C3.1, ET-1 and ET-2 power heads, and the Duo. Singles of the same screw are listed as 0176.\u003c\/p\u003e\u003cp\u003eThe 30 mm length is doing real structural work in these locations, drawing two or three mouldings together in a single pull, so it is not a screw to improvise around. DIN 7985 gives it a machine thread and a low cross-recessed pan head, which means it engages a moulded-in insert or a matching thread rather than cutting its own; the wrong length therefore does not simply hold less well, it may not reach the thread at all.\u003c\/p\u003e\u003cp\u003eAnyone servicing a mixed fleet of SEBO machines reaches for this size more often than any other, and running out mid-job usually means a machine sits on the bench until the next delivery. A bag of ten is the difference between finishing a job and parking it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSEBO part 0176ER — screw AM4 x 30 to DIN 7985, ten per pack\u003c\/li\u003e\n\u003cli\u003eConstruction: cross-recessed pan-head machine screw, M4 thread, 30 mm length\u003c\/li\u003e\n\u003cli\u003eFits SEBO AUTOMATIC X1, AUTOMATIC X2, AUTOMATIC X4, AUTOMATIC X4 Boost, AUTOMATIC X5, AUTOMATIC X7 Premium, AUTOMATIC X7 Pet and AUTOMATIC X8\u003c\/li\u003e\n\u003cli\u003eAlso fits ESSENTIAL G1, ESSENTIAL G2, ESSENTIAL G4 and ESSENTIAL G5\u003c\/li\u003e\n\u003cli\u003eAlso fits FELIX Premium, FELIX 2 Premium and the DART\u003c\/li\u003e\n\u003cli\u003eAlso fits the 300 MECHANICAL, the 350 MECHANICAL and the 370 COMFORT\u003c\/li\u003e\n\u003cli\u003eAlso fits AIRBELT D4 Premium, AIRBELT E3 Premium, AIRBELT K3 Premium and the C3.1\u003c\/li\u003e\n\u003cli\u003eAlso fits ET-1 and ET-2 power heads, with or without switch, and the Duo\u003c\/li\u003e\n\u003cli\u003ePack: ten screws. Singles are stocked as 0176\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO hardware from an authorized dealer; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214540235002,"sku":"0176ER","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/54f4f72ecd2948ef1fdaf132debfeab5.jpg?v=1786667984"},{"product_id":"spacer-washer-18-25-1-0-single-for-duo","title":"SEBO Spacer Washer 18\/25\/1.0 for the DUO — Single","description":"\u003cp\u003eRunning clearance on a shaft is set by a washer of exactly this thickness, and on the SEBO DUO the number to order is 149. The designation 18\/25\/1.0 is the size, and the washer comes on its own.\u003c\/p\u003e\u003cp\u003eIts whole job is to take up the gap between a rotating component and whatever it sits against, so the component turns where it is meant to and nowhere else. There is no adjustment available at this position — the spacer either is the right thickness or it is not, which is why substituting a washer that merely looks similar rarely ends well.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO DUO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 18\/25\/1.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e sets running clearance on its shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e sold individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e slides back onto the shaft in the original position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder as:\u003c\/strong\u003e SEBO part 149\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWorn thin, or missing altogether after a previous repair, the spacer lets the part riding on that shaft wander sideways. It shows up as a knocking or grinding note that was not there before, as uneven wear on whatever sits either side of it, and as a machine that no longer feels smooth to push. Left alone, the side load keeps working on the neighbouring components and the bill grows.\u003c\/p\u003e\u003cp\u003eNote how many spacers came off the shaft and in what order before anything is cleaned, since a stack of washers is easy to reassemble wrong and the running clearance depends on all of them together. Measuring the old one is worth the moment it takes: a spacer that has worn will read under its nominal thickness, and that is confirmation rather than a guess.\u003c\/p\u003e\u003cp\u003eAnyone searching for a SEBO DUO spacer washer, a DUO shaft spacer or genuine SEBO part 149 has landed in the right place. Lay the old washer against the new one before reassembly to confirm the thickness matches, and check whether more than one sat on the shaft when you took it apart. Genuine SEBO part, shipped in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214540398842,"sku":"149","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0149.jpg?v=1709348897"},{"product_id":"spacer-washer-18-25-1-0-10-pack-for-duo","title":"SEBO Spacer Washer 18\/25\/1.0 for the Duo — 10 Pack","description":"\u003cp\u003eSpacers set clearance, and when clearance goes the first symptom is noise long before anything actually breaks. Part 0149ER puts ten of the 18\/25\/1.0 spacer washers used on the SEBO Duo into a single order — the same component sold individually as 0149.\u003c\/p\u003e\u003cp\u003eEach ring slips over its spindle and fixes how far the neighbouring component can travel along it. Get that dimension right and the part turns without touching what sits beside it. Get it wrong, or leave the spacer out entirely, and the assembly wanders under load, wearing unevenly on one face and picking up a tick or a rub that gets worse with every hour of running. Because the figures in the name are the specification, a spacer is one of the few parts where a visually similar washer from the drawer is definitely the wrong answer. A plain flat washer such as 0143 exists to spread a screw head's load; a spacer exists to hold a gap, and the two are not interchangeable even where the bores happen to look alike.\u003c\/p\u003e\u003cp\u003eThese are cheap, easy to mislay during a teardown and easy to drop into the wrong tray, so a bag of ten means the correct thickness is always to hand rather than approximated with whatever is closest. Shops running several Duo machines get through them steadily. The prompts to order are consistent: a component that can be pushed sideways along its spindle by hand, a tick that rises with speed, or wear concentrated on one face of a rotating part where it should be even.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSEBO part 0149ER — spacer washer 18\/25\/1.0, ten per pack\u003c\/li\u003e\n\u003cli\u003eFitment: the SEBO Duo\u003c\/li\u003e\n\u003cli\u003eFunction: holds the axial gap that stops a neighbouring part drifting along its spindle\u003c\/li\u003e\n\u003cli\u003ePack: ten washers. Singles are stocked as 0149\u003c\/li\u003e\n\u003cli\u003eThe Duo diagram also carries locking washer 0141ER and ball bearing 0222\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTen genuine SEBO washers to a bag, dispatched inside 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214540464378,"sku":"0149ER","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/542a4a1b8d4a62887d6ed78e3814808f.jpg?v=1786670799"},{"product_id":"handle-stop-spring-for-duo","title":"SEBO Handle Stop Spring for the Duo","description":"\u003cp\u003eLaying the handle back and having it hold its position depends on the handle stop, and this spring is the piece that loads it. SEBO shows the handle stop spring block at position 32 of the Duo parts diagram and supplies the spring as part 3032, sitting between the brush housing at 31, part 3001HG, and the terminal block at 33, part 0502.\u003c\/p\u003e\u003cp\u003eOnce the spring weakens or breaks, the stop no longer engages cleanly. The handle either drops on its own or refuses to lock where you set it, which turns a simple pass across the carpet into a fight with the machine and puts the whole weight of the Duo into the operator's wrist. The failure is gradual on a tired spring and instant on a broken one, but the fix is the same either way, and there is no adjustment anywhere on the machine that recovers a spring which has gone soft.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3032\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 32 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e loads the handle stop mechanism\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 3001HG brush housing at 31, 0502 terminal block at 33, 3113HG handle connector at 20, 3027HG handle connector cover at 19\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eReaching the spring means opening the area where the handle joins the body, so it is a sensible item to keep on hand before starting rather than ordering halfway through. While that section is apart, the handle connector 3113HG and its cover 3027HG are both accessible and often due attention at the same time. Anyone searching for a SEBO Duo handle spring, a handle stop spring or part 3032 has found the correct listing. Genuine SEBO spring supplied by an authorized dealer. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214541611258,"sku":"3032","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5705861f44640113503e6a7527df4d92.jpg?v=1786670861"},{"product_id":"spring-for-plunger-button-on-duo","title":"SEBO Plunger Button Return Spring for the Duo","description":"\u003cp\u003eWhen the plunger button on a Duo stops popping back after a press, the small return spring behind it has usually lost its set. Part 2423 is that spring, and SEBO draws it as position 45 in the Duo parts diagram, sitting directly beneath the plunger button itself.\u003c\/p\u003e\u003cp\u003eThe spring does one job and does it thousands of times: it pushes the button back out of the housing after each press so the control is ready for the next one. Steel loses temper slowly under repeated compression, and the failure is gradual rather than sudden. First the button feels lazy on the return, then it starts to hang halfway, then it stays down altogether and the control reads as dead even though the button itself is intact. Grit in the bore accelerates the same story, so it is worth cleaning the recess while the parts are out.\u003c\/p\u003e\u003cp\u003eA spring costs almost nothing and takes minutes to change, so it is the sensible first move before condemning the button. Fit the new spring, refit the button, and the control should return sharply under thumb pressure with no sticking at the top of the stroke. If the button itself is cracked or the plastic has gone soft around the shaft, the complete assembly is listed separately at position 44 as 2438HG, and doing both together saves opening the machine twice.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2423\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 45, SEBO Duo exploded view\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e a single spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom it cures:\u003c\/strong\u003e a button that stays depressed, returns slowly, or feels dead underneath\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePairs with:\u003c\/strong\u003e plunger button 2438HG, position 44\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO spare from an authorized dealer; ships in 2-5 business days. Searches for a SEBO Duo plunger spring or a Duo button return spring both point at this number.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214541807866,"sku":"2423","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2423.jpg?v=1785151917"},{"product_id":"spring-cog-to-bearing-block-for-duo","title":"SEBO Drive Cog Spring for the Duo","description":"\u003cp\u003eBetween the brush drive cog and the bearing block sits a small spring whose only job is to keep constant pressure on that connection. SEBO lists it as part 3028 and draws it at position 67 of the Duo parts diagram, with the pulley at 66, part 3009, on one side and the brush drive cog at 68, part 3007, on the other.\u003c\/p\u003e\u003cp\u003eSprings lose tension gradually, which is what makes this one awkward to diagnose. When it relaxes, the cog is free to shift a fraction under load and the drive begins to skip or rattle in a way that looks exactly like gear damage but is not. Owners often replace the cog, find the noise still there, and only then work back to the spring. The reverse case is worth knowing too: a spring that has broken outright will let the cog wander far enough to chew its own teeth, so a stripped cog is a reason to inspect the spring rather than simply fit a new cog.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3028\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 67 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e between the brush drive cog and the bearing block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 3009 pulley at 66, 3007 brush drive cog at 68, 3074HG bearing block at 69, 3052HG bearing block assembly LH at 70\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBecause it is a small item that is easy to overlook, many owners add one to the order whenever the drive side of the machine is being opened up for other work, rather than reaching the bench and discovering the old spring has gone slack with the machine already in pieces. Searches for a SEBO Duo spring, a drive cog spring or part number 3028 all resolve to this component. Genuine SEBO spare through an authorized dealer. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214541873402,"sku":"3028","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3028.jpg?v=1785154194"},{"product_id":"carbon-brush-set-w-capacitor-brush-m-for-3049er-motor-with-pulley-for-duo","title":"SEBO Carbon Brush Set with Capacitor for the DUO 3049ER Motor","description":"\u003cp\u003eSparking at the motor, a machine that cuts out and restarts, or power that has quietly dropped off over a season of use — on the Duo these all point at the same wear item. Part 05084S is the Brush M carbon set for the pulley-driven 3049ER motor, and the capacitor is included in the set rather than ordered separately.\u003c\/p\u003e\u003cp\u003eCarbon is sacrificial by design. The blocks are held against the spinning commutator by spring pressure and shorten a little every hour the motor turns, until the spring behind them can no longer maintain firm contact. Left past that point the arcing begins to pit the copper segments of the commutator itself, which is the step that turns a modest parts order into a motor replacement. The capacitor supplied alongside them suppresses the electrical noise that brush gear generates, and renewing it with the brushes means the whole contact assembly goes back in a known condition. Fitting new carbons alongside an aged capacitor leaves half the job done and the same components disturbed again later.\u003c\/p\u003e\u003cp\u003eTwo details are worth getting right at the bench. Change both blocks together so they bed in evenly against the commutator, and check the motor identification before ordering: this set is matched to the 3049ER motor with the pulley, so a Duo that has had a motor changed at some point in its life may not take it. Fits the SEBO Duo. It is worth measuring the remaining length of the old blocks before discarding them, since a set that has worn evenly and stopped short of the commutator tells a different story from one that has worn at an angle, which usually points at a bearing or an alignment issue behind the brush gear.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSEBO part 05084S — Brush M carbon set supplied with its capacitor\u003c\/li\u003e\n\u003cli\u003eMatched to the pulley-driven 3049ER motor\u003c\/li\u003e\n\u003cli\u003eFits the SEBO Duo\u003c\/li\u003e\n\u003cli\u003eReplace when: the motor sparks visibly, the machine cuts out and restarts, or suction and drive have faded gradually\u003c\/li\u003e\n\u003cli\u003eFit both blocks at once so they bed in evenly\u003c\/li\u003e\n\u003cli\u003eOther Duo service parts: ball bearing 0222, terminal block 0502, locking washer 0141\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO part; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214545379578,"sku":"05084S","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/206db5f726f839c48b7da0dcdeae5782.jpg?v=1786670802"},{"product_id":"motor-pulley-19-for-duo","title":"SEBO Motor Pulley 19 for the Duo","description":"\u003cp\u003eEverything the motor produces reaches the brush through this one component first. SEBO designates it Motor Pulley 19, part 3014, and places it at position 51 of the Duo parts diagram, in the group that starts at the 120 V motor at 34, part 3049ER, and runs down through the clamp at 52 and the pulley at 53.\u003c\/p\u003e\u003cp\u003eBecause it turns at motor speed, this pulley collects wear faster than the slower ones further along the drive. A groove that has gone shiny, or edges that have started to feather, will chew belts and shed drive at the same time, so a machine on its third belt in a short span is usually asking for a pulley rather than another belt. The tell is a brush that spins up normally with the machine tipped back but bogs down as soon as it meets pile, since that is the moment the belt has real work to do and the polished groove lets go.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3014\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSEBO designation:\u003c\/strong\u003e Motor Pulley 19\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 51 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 3049ER motor with pulley at 34, 3030 clamp at 52, 3013 pulley at 53, 3038 and 3042 drive belts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf the motor itself is being renewed, note that SEBO supplies 3049ER complete with its pulley, so the two orders overlap and only one is usually needed. The carbon brush set with capacitor listed for that motor is 05084S, and it is the item to rule out before assuming the motor has failed. Anyone searching for a SEBO Duo motor pulley, Pulley 19 or part 3014 has the right listing; matching the diagram position before ordering avoids the near-identical pulleys elsewhere in the same drive. Genuine SEBO component from an authorized dealer. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214546034938,"sku":"3014","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/d770ef164eec5fddd0415ebfbf211b33.jpg?v=1786670834"},{"product_id":"motor-120v-with-pulley-for-duo","title":"SEBO 120V Motor with Pulley for the Duo","description":"\u003cp\u003eWhen a Duo brush machine will not turn its brushes at all and the belts, pulleys and gears have already been ruled out, the motor is what remains. Part 3049ER is SEBO's 120 V replacement for the Duo, and it arrives with the pulley already fitted, so the drive can be rebuilt without transferring anything across from the old unit or hunting for a puller.\u003c\/p\u003e\u003cp\u003eThe Duo parts diagram lists the motor at position 34, with the terminal block 0502 at 33 and the locking washer 0141 at 35 either side of it, and the 3 mm drive belt 3038 close by at position 37. Motors end in one of three ways: carbon brushes worn down to the spring, a winding that has burnt, or bearings that have run dry. The warning signs overlap - a hot smell after a short run, hard or hesitant starting, a machine that hums without moving. Since this is the most substantial single component in the machine, confirm the diagnosis before ordering. Where the fault is only worn brushes, SEBO lists a carbon brush set with capacitor, part 05084S, specified for this very motor, and that is the smaller repair. Where the motor genuinely has to come out, inspect the belt path and pulleys while access is good.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3049ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 120 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e complete with pulley fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 34 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService alternative:\u003c\/strong\u003e carbon brush set with capacitor 05084S, listed by SEBO for motor 3049ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect while it is out:\u003c\/strong\u003e drive belt 3038, motor pulley 3014, terminal block 0502\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eListed for anyone searching a SEBO Duo motor, a Duo 120V replacement motor, or the number 3049ER on its own. Genuine SEBO motor through an authorized dealer, shipping in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214547476730,"sku":"3049ER","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5e0049f45040b6bbed11fe94d0756d08.jpg?v=1786670889"},{"product_id":"brush-drive-cog-for-duo","title":"SEBO Brush Drive Cog for the Duo Brush Machine","description":"\u003cp\u003eThe toothed wheel at position 68 of SEBO's Duo parts diagram is what hands drive over to the brush, and part 3007 replaces it. Once the teeth round off or strip, the drive skips under load: the brush slows or stops while the motor carries on running, and the carpet gets worked unevenly across the width of the machine.\u003c\/p\u003e\u003cp\u003eCog wear usually announces itself as a chatter that comes and goes with resistance rather than a steady noise, which is a useful way of telling it apart from a dry bearing. The cog does not work alone, and the parts either side of it on the drawing tend to fail together: the spring at 67, part 3028, that keeps pressure on the connection; the pulley at 66, part 3009; the bearing block at 69, part 3074HG; and the left-hand bearing block assembly at 70, part 3052HG. All are exposed in the same teardown, so it is worth looking at them before everything goes back together rather than opening the machine twice.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 68 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e toothed cog that transmits drive to the brush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 3028 spring at 67, 3009 pulley at 66, 3074HG bearing block at 69, 3052HG bearing block assembly LH at 70\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOrdering by name alone is risky on this machine, since the drive group runs from position 51 through to 72 and several of the components look similar on the bench. Matching the diagram number to what came out is the fastest way to get the right item first time. A SEBO brush drive cog, a Duo drive cog and part 3007 are all the same component under different search terms. Genuine SEBO part supplied by an authorized dealer. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214548721914,"sku":"3007","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/7119da1b06a279f7de842a4eb298257f.jpg?v=1786670828"}],"url":"https:\/\/evacuumsandmore.com\/collections\/sebo-duo.oembed?page=4","provider":"Vacuums and More","version":"1.0","type":"link"}