{"title":"Sebo X4","description":null,"products":[{"product_id":"cover-release-for-x4-x5-g1-and-g2-gray-black","title":"SEBO Cover Release for AUTOMATIC X4, X5 and ESSENTIAL G1\/G2 — Gray Black","description":"\u003cp\u003eEvery bag change on these machines begins with the cover release, and 5706GS is the gray black one. SEBO shows it at item 19 of the AUTOMATIC X4\/X5 drawing, working against the return spring 5210 that sits a few positions along at 29.\u003c\/p\u003e\u003cp\u003eThe catch is handled at every single bag change, and its engaging tab slowly rounds over. Once that happens the release either loses its grip, letting the cover rise under vibration and breaking the seal around the bag chamber, or it binds so tightly that the door has to be forced open each time. Suction complaints that survive a fresh bag and clean filters often come back to this one moulding, because a cover held a fraction proud leaks air the whole time the motor runs. A new release pulls the cover down onto its gasket the way it should.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4, X4 Boost and X5, plus ESSENTIAL G1 and G2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e item 19, AUTOMATIC X4\/X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5706GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternative finishes:\u003c\/strong\u003e 5706SB in silver for the X4 and X4 Boost, 5706SG in yellow for the X4 and X5\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe moulded cover that caps the latch is a separate number and colour-specific: 5707WE in white, 5707DB in dark blue and 5707SW in black.\u003c\/p\u003e\u003cp\u003eOne release covers both the X series and the smaller ESSENTIAL machines here, which is convenient for anyone running more than one SEBO. It is the same moulding across all of them, and it fits the original mounting without modification.\u003c\/p\u003e\u003cp\u003eSearches for a SEBO X4 bag door latch, an ESSENTIAL G1 cover release, an X5 bag compartment catch, or part 5706GS by number all arrive here. Genuine SEBO moulding, supplied by an authorised dealer. If the catch has snapped rather than worn, look at the return spring behind it before reassembly, since a spring that has lost tension will chew through a new release just as quickly. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214479188218,"sku":"5706GS","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5706GS.jpg?v=1785163543"},{"product_id":"cover-release-for-x4-and-x4-boost-silver","title":"SEBO Cover Release for AUTOMATIC X4 and X4 Boost — Silver","description":"\u003cp\u003eThe catch that holds the bag compartment shut is finish-specific on the AUTOMATIC X4 and X4 Boost, and 5706SB is the silver listing. It is the small moulding a thumb presses to swing the front cover clear of the machine.\u003c\/p\u003e\u003cp\u003eA cover release has a hard life. The same little tab is loaded at every bag change, and the plastic gradually deforms until the door no longer pulls down tight against its gasket. A cover sitting a fraction proud costs suction the whole time the machine runs, and the loss usually gets blamed on a full bag or dirty filters rather than on the latch. A new catch draws the door back down onto its gasket, and the difference is usually obvious at the nozzle straight away.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4 and AUTOMATIC X4 Boost\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5706SB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes:\u003c\/strong\u003e holds the bag compartment cover shut and lets it go on demand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilver and red trim, same fitment:\u003c\/strong\u003e 5722SB bag housing catch, 5721DR carrying handle, 5160DR switch cap, 5703DR cable hook, 5645AM handle assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe gray black release is 5706GS and the yellow one is 5706SG, so check the trim on your own machine before ordering rather than going by the model alone.\u003c\/p\u003e\u003cp\u003eWorth checking while the catch is off: the gasket the cover closes against. A latch and a hardened seal produce much the same symptom, and replacing one without looking at the other often leaves the fault half-cured.\u003c\/p\u003e\u003cp\u003eTypical searches that land here are SEBO X4 cover release, AUTOMATIC X4 Boost bag door catch, silver bag compartment release, and part 5706SB. Supplied as a genuine SEBO moulding by an authorised dealer. Fitting needs no special tools, and there is nothing to set up afterwards beyond checking that the cover closes with a positive click rather than a soft one. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214479253754,"sku":"5706SB","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/e72257301d5fcd1d753acbc2eda4a22d.jpg?v=1786668366"},{"product_id":"handle-with-cord-tube-and-switch-for-white-x4-x5-and-x7-gray-black-white","title":"SEBO Handle with Cord, Tube and Switch for AUTOMATIC X4, X4 Boost, X5 and X7 Premium — Gray Black \/ White","description":"\u003cp\u003eWhite-trimmed machines take the gray black and white handle, and 5642AM supplies it complete: grip, tube, internal wiring and switch built up as one part. SEBO shows the assembled handle at item 1, the very first entry on its exploded parts drawing, directly above the switch cap and the cable clamps that follow it.\u003c\/p\u003e\u003cp\u003eIntermittent running is the usual reason this number gets ordered. A conductor broken inside the lead will make contact at one handle angle and drop it at another, and a switch that has been worked for years produces the same fault from a different cause. Fitting the built-up section rules out the cable, the switch and the wiring together, and it saves splicing a fresh cord onto a worn switch or feeding new wire down a tube that has already split. On a machine used daily, that is one repair instead of three visits to the same casing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4, X4 Boost, X5 and X7 Premium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e gray black with white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e grip, tube, cord and switch, pre-wired\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e item 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5642AM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite trim, identical fitment:\u003c\/strong\u003e 5160WE switch cap, 5703WE cable hook, 5721WE carrying handle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTrim colour decides the part number here, so compare your machine against the photograph before ordering; the silver, red and yellow versions each carry a number of their own and will not match a white-trimmed body. If only the grip has been damaged, the gray black grip on its own is 5297GSAM, and the switch behind the cap is 05113.\u003c\/p\u003e\u003cp\u003eTypical searches include SEBO X5 handle assembly, AUTOMATIC X4 handle with cord and switch, X7 Premium handle replacement, and genuine SEBO handle 5642AM. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214485643514,"sku":"5642AM","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1595dc7ffaebe63966c9d0cc11e65fd7.jpg?v=1786668332"},{"product_id":"handle-with-cord-tube-and-switch-for-red-x4-and-x7-gray-black-red","title":"SEBO Handle with Cord, Tube and Switch for AUTOMATIC X4 and X4 Boost — Gray Black \/ Red","description":"\u003cp\u003eRed AUTOMATIC X4 machines were finished with red detailing, and 5645AM is the matching upper handle: gray black with red, delivered as one wired assembly holding the tube, the cord and the switch. It is the section that sits above the bag compartment, and it is where a hand rests through every minute of use.\u003c\/p\u003e\u003cp\u003eRepair shops tend to fit the whole section rather than pieces of it, because the components inside age at much the same rate. Years of unplugging a machine by pulling on its cord leave the wires weakened right where they enter the grip, switch contacts burn and stick after enough operations, and by that stage the tube is usually carrying a hairline split as well. Doing the work once with a complete handle beats opening the same casing three times across a couple of seasons.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4 and AUTOMATIC X4 Boost\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5645AM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e gray black with red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e an assembled upper handle, wired ready to fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed trim, same fitment:\u003c\/strong\u003e 5160DR switch cap, 5703DR cable hook, 5721DR carrying handle, 5707DR latch release cover, 5711DR exhaust filter cover, 5755DR bag housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRun the replacement cord the way the original was routed inside the tube, and make certain its strain relief sits properly before the casing goes back together. A cord pinched at that point will fail again in the same place within a season.\u003c\/p\u003e\u003cp\u003eAnyone looking for a SEBO X4 handle with cord and switch, an X4 Boost handle assembly, or part 5645AM by number is in the right place. The gray black bumper base for these bodies is 5702GS, the silver cover release is 5706SB, and the bag housing catch in silver is 5722SB. Genuine SEBO spare, ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214485774586,"sku":"5645AM","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5645AM_9a8f943d-17ff-46d9-9285-53626b246938.jpg?v=1785138165"},{"product_id":"handle-with-cord-tube-and-switch-for-dark-blue-x4-and-x5-gray-black-yellow","title":"SEBO Handle with Cord, Tube and Switch for AUTOMATIC X4 and X5 — Gray Black \/ Yellow","description":"\u003cp\u003eYellow is the accent colour SEBO gave the dark blue AUTOMATIC X4 and X5 uprights, and 5647AM is the upper handle built to suit them: gray black with yellow, and it arrives with the tube, the cord and the switch already fitted.\u003c\/p\u003e\u003cp\u003eA vacuum that only keeps running while its handle is held at one exact angle has lost a conductor somewhere in the cable between plug and switch. Tape and heat-shrink never hold that repair for long, because the wire carries on flexing at the same spot every time the machine is folded. Changing the complete section removes the doubt in one go: fresh cable, fresh switch, fresh tube, all sitting in the positions the factory intended. It is also the tidier outcome, because there is no join left inside the tube to be found again by whoever services the machine next.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4 and AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5647AM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e gray black with yellow accents\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e grip, tube, cord and switch, wired\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYellow trim, same machines:\u003c\/strong\u003e 5160SG switch cap, 1859SG handle catch, 5706SG cover release, 5722SG bag housing catch, 5730SG display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDark blue panels:\u003c\/strong\u003e 5702DB bumper base, 5711DB exhaust filter cover, 5713DB brush roller release\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch the accent colour to your machine before ordering, since the white, red and silver versions are separate listings altogether. Searches such as SEBO X5 handle assembly, AUTOMATIC X4 handle with cord and switch, yellow switch handle, or simply 5647AM all lead to this listing. If the machine has been sitting unused, look over the cord along its full length as well; a lead cut by a vacuum wheel is a separate part number.\u003c\/p\u003e\u003cp\u003eGenuine SEBO assembly, supplied by an authorised dealer rather than pulled from a used machine, and it ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214485807354,"sku":"5647AM","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5647AM_3d2246a2-aafd-4159-8718-9be0ea4ede83.jpg?v=1785138983"},{"product_id":"dust-bag-housing-bumper-base-for-x4-and-x5-dark-blue","title":"SEBO Bag Housing Bumper Base for AUTOMATIC X4 and X5 — Dark Blue","description":"\u003cp\u003eThe strip of moulding that runs along the foot of the bag housing is the first part of an upright to meet a baseboard, and dark blue AUTOMATIC X4 and X5 machines use 5702DB for it. SEBO's AUTOMATIC X4\/X5 drawing carries the bumper base at item 47, between the locking rod 5083 at 46 and the bag housing itself at 48.\u003c\/p\u003e\u003cp\u003eBumpers are meant to be sacrificial. They deform, take the energy out of an impact and keep it away from the shell behind them, and after enough seasons of that treatment the plastic hardens, tears away from its fixing tabs and finally drops off. From then on every knock arrives directly on the housing, and splitting one of those means changing a much bigger moulding. A new strip puts the buffer back and tidies the front of the machine while it is at it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4 and AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSits:\u003c\/strong\u003e across the lower front edge of the bag housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e item 47, AUTOMATIC X4\/X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5702DB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther dark blue panels:\u003c\/strong\u003e 5749SE front cover, 5755DB bag housing, 5711DB exhaust filter cover, 5713DB brush roller release, 5768DB cable hook with carrying handle and stop spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLook over the mounting tabs on the housing while the old strip is off, because a tab that has broken away will leave the new bumper standing proud and it will be knocked off again in short order.\u003c\/p\u003e\u003cp\u003eThe same moulding in other finishes is 5702WE in white, 5702GS in gray black and 5702SW in black. Shoppers searching for a SEBO X4 bumper strip, an AUTOMATIC X5 dust bag housing bumper, a dark blue bumper trim, or the number 5702DB on its own have found the right listing. Genuine SEBO spare, supplied by an authorised dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214493081850,"sku":"5702DB","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/27d09a3c7c1705da5ac2023fd8f8131b.jpg?v=1786668338"},{"product_id":"dust-bag-housing-bumper-base-for-x4-gray-black","title":"SEBO Bag Housing Bumper Base for AUTOMATIC X4 and X4 Boost — Gray Black","description":"\u003cp\u003eGraphite AUTOMATIC X4 and X4 Boost bodies wear gray black trim, and 5702GS is the strip moulded to match. It runs along the lower front face of the bag housing at item 47 of SEBO's exploded drawing, taking the contact between a heavy upright and whatever it is steered into.\u003c\/p\u003e\u003cp\u003eMost owners only notice the part once it has gone. An ageing bumper stiffens, lifts at one end and finally snaps off, and after that doorframes and furniture legs meet painted plastic instead of rubber-hard trim. Scuffing turns into chipping at the leading corners, which is exactly where a shell is hardest to repair and where damage shows most on a graphite finish. Fitting a fresh strip is a few minutes' work with a driver.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4 and AUTOMATIC X4 Boost\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes:\u003c\/strong\u003e impact trim along the bottom edge of the bag housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e item 47\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5702GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame fitment:\u003c\/strong\u003e 5712GS exhaust filter catch, 5722SB bag housing catch, 5706SB cover release, 5703DR cable hook, 5645AM handle with cord, tube and switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEach body colour takes its own strip, so check yours first: white is 5702WE, dark blue is 5702DB and black is 5702SW. The graphite bag housing that this strip mounts to is 5763GS on the X4 Boost, and the gray black exhaust filter catch on the same panel is 5712GS, so a machine being tidied up can be brought back to one consistent finish.\u003c\/p\u003e\u003cp\u003eSearch terms that reach this page include SEBO X4 bumper base, AUTOMATIC X4 Boost dust bag housing bumper, gray black bumper trim, and part 5702GS. It is a genuine SEBO moulding rather than a universal rubber strip, so it follows the contour of the housing and sits flush at both ends. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214493114618,"sku":"5702GS","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2fc4824b45af8bf67e8608d739396980.jpg?v=1786668340"},{"product_id":"dust-bag-housing-bumper-base-for-x4-black","title":"SEBO Bag Housing Bumper Base for AUTOMATIC X4 — Black","description":"\u003cp\u003eFew mouldings on a black AUTOMATIC X4 are replaced as often as the bumper base, and 5702SW is the black one. It is the impact trim fixed across the bottom of the bag housing, drawn at item 47 of SEBO's exploded parts sheet.\u003c\/p\u003e\u003cp\u003eThe job it does is plain enough: absorb whatever a heavy upright is pushed into, whether a doorframe, a stair riser or the leg of a sofa, and give way so the shell does not have to. Once the strip has cracked through or fallen away, those knocks land on painted plastic, and light marking at the front corners soon turns into chipping. A fresh bumper puts the buffer back and smartens up a vacuum that still has plenty of service ahead of it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e moulded bumper base for the bag housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e item 47\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5702SW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack trim for the same machine:\u003c\/strong\u003e 5707SW latch release cover, 5711SW exhaust filter cover, 5713SW brush roller release, 5763SW bag housing, 5774SE front cover, 5768SW cable hook with carrying handle and stop spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCheck that the tabs on the housing are intact before the new strip goes on, and press each one home rather than forcing the moulding down at one end. A tab left unclipped is what turns a five-minute job into a repeat purchase.\u003c\/p\u003e\u003cp\u003eBodies in dark blue, white or gray black each need a different strip: 5702DB, 5702WE and 5702GS respectively. Anyone searching for a SEBO X4 bumper strip, a black dust bag housing bumper base, or simply 5702SW is looking at the correct part. A genuine SEBO moulding follows the curve of the housing exactly, which a generic strip cut to length will not do. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214493147386,"sku":"5702SW","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/a92c99d5bb7e7d513f931fc0656e6fdf.jpg?v=1786668343"},{"product_id":"dust-bag-housing-bumper-base-for-x4-and-x5-white","title":"SEBO Bag Housing Bumper Base for AUTOMATIC X4, X4 Boost and X5 — White","description":"\u003cp\u003eWhite-bodied AUTOMATIC X4, X4 Boost and X5 uprights take 5702WE at the foot of the bag housing. SEBO lists it as item 47 on the AUTOMATIC X4\/X5 sheet, sitting between the locking rod 5083 at position 46 and the complete bag housing at position 48.\u003c\/p\u003e\u003cp\u003eA white moulding shows its years more plainly than a dark one. The colour goes off first, the material stiffens next, and eventually it splits where it has taken the most hits, at which point the bumper is cushioning nothing. Renewing it guards the shell underneath and visibly freshens the front of the vacuum. There is nothing to adjust afterwards, since the strip locates on its own tabs and the housing does the aligning. White also makes damage obvious early, which is a small advantage: the strip is usually changed before the shell behind it has taken any punishment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4, X4 Boost and X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e item 47, AUTOMATIC X4\/X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5702WE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite panels with the same fitment:\u003c\/strong\u003e 50750SE front cover, 5755WE bag housing, 5711WE exhaust filter cover, 5712WE exhaust filter catch, 5713WE brush roller release, 5768WE cable hook with carrying handle and stop spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe front cover seal 5454 fits the same three machines and is worth renewing while the front of the vacuum is apart, since a hardened seal costs suction in the same quiet way a lifted cover does.\u003c\/p\u003e\u003cp\u003eDark blue, gray black and black bumper bases carry the numbers 5702DB, 5702GS and 5702SW. Searches for a SEBO X5 bumper base, a white dust bag housing bumper, an X4 Boost bumper strip, or part 5702WE all arrive here. Supplied as a genuine SEBO moulding by an authorised dealer, it ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214493180154,"sku":"5702WE","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3b02f02b6845f891a2175c9e9d220863.jpg?v=1786668348"},{"product_id":"cable-hook-for-x4-x5-and-x8-dark-blue","title":"SEBO Cable Hook for AUTOMATIC X4, X5 and X8 — Dark Blue","description":"\u003cp\u003eWinding several yards of mains cable puts real leverage on a catch not much bigger than a thumbnail, which is why cord hooks are a routine replacement. 5703DB is the dark blue one, shared by the AUTOMATIC X4, the X5 and the X8.\u003c\/p\u003e\u003cp\u003eFailure comes at the root of the moulding, where years of daily winding have worked the plastic back and forth. What follows is more than untidiness: an unsecured cable drags along behind the vacuum, gets pinched under its wheels and loses its outer jacket far earlier than it should. Refitting a hook at the original mounting point puts the coil back where it belongs, high on the body and clear of the floor, and it takes one screw and a couple of minutes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4, AUTOMATIC X5 and AUTOMATIC X8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5703DB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e keeps the coiled lead secured while the machine is stored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching dark blue part:\u003c\/strong\u003e 5721DB carrying handle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOn the X4 and X5 the hook is also sold as a set together with the carrying handle and stop spring under number 5768DB, which is the tidier route when both mouldings have aged at the same rate and neither looks likely to see out another year.\u003c\/p\u003e\u003cp\u003eOne moulding covering three machines is useful for a household or a small cleaning round running a mixed fleet, since the same spare suits whichever of them breaks first. It is worth keeping one on the shelf for that reason alone, as a hook tends to snap at the least convenient moment, part-way through a job with the cable already out.\u003c\/p\u003e\u003cp\u003eSearches that lead here include SEBO X8 cable hook, AUTOMATIC X4 cord hook, X5 cord storage hook in dark blue, and the number 5703DB on its own. Genuine SEBO moulding rather than a generic clip, and it ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214493835514,"sku":"5703DB","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/e08112371ad614debc2b38b853bff55c.jpg?v=1786668351"},{"product_id":"cable-hook-for-x4-and-x7-red","title":"SEBO Cable Hook for AUTOMATIC X4 and X4 Boost — Red","description":"\u003cp\u003ePart 5703DR is the red cord hook for AUTOMATIC X4 and X4 Boost uprights, the small catch high on the body that a coiled mains lead hangs from between jobs.\u003c\/p\u003e\u003cp\u003eMovement is the early warning. A hook that has begun to work loose no longer holds the base of the wrap, so the cable slides free a turn at a time and finishes up trailing across the floor behind the vacuum. Renewing the moulding as soon as it feels slack keeps the lead off the ground and away from the wheels, which is where jackets get cut and crushed. Left long enough, the hook simply parts company with the machine and the coil lands in a heap.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4 and AUTOMATIC X4 Boost\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5703DR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e cord wrap hook on the upper body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed trim, same fitment:\u003c\/strong\u003e 5160DR switch cap, 5721DR carrying handle, 5707DR latch release cover, 5711DR exhaust filter cover, 5645AM handle with cord, tube and switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSEBO also lists the hook together with the carrying handle and the stop spring as 5768DR, which suits a machine where the whole upper trim has aged rather than one moulding failing on its own.\u003c\/p\u003e\u003cp\u003eRed is specific to these bodies, so the number cannot be swapped for the white, black or graphite hook without the colour standing out. Check the carrying handle at the same time, since the two mouldings sit within a few inches of each other and tend to be damaged by the same knock.\u003c\/p\u003e\u003cp\u003ePeople find this page looking for a SEBO X4 cable hook, an X4 Boost cord hook, a red cord wrap hook, or part 5703DR by number. It is a genuine SEBO moulding, so the fixing boss and the curve of the hook match the original exactly and the cord wraps to the same depth as before. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214493868282,"sku":"5703DR","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/8bf59d8e3187bbd3081585c564fe4214.jpg?v=1786668353"},{"product_id":"cable-hook-for-x4-and-x7-black","title":"SEBO Cable Hook for AUTOMATIC X4 and X7 Pet — Black","description":"\u003cp\u003ePart 5703SW is the black cord hook used on black-bodied AUTOMATIC X4 uprights and on the X7 Pet — the catch on the upper body that the mains lead is wound onto.\u003c\/p\u003e\u003cp\u003eMachines bought for animal hair see more of this part than most. A pet vacuum gets carried from room to room and has its cord unwound and rewound several times in a session rather than being plugged in and left alone, and all of that handling is what wears a hook out. Once one fails, the wrap comes undone as soon as the machine is lifted, leaving the lead loose on the floor to be stepped on or run over, so this is a part worth having spare.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO AUTOMATIC X4 and the AUTOMATIC X7 Pet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5703SW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e cord wrap hook on the upper section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack trim with the same fitment:\u003c\/strong\u003e 5721SW carrying handle, 5161SW switch cap holder, 5295AM handle grip, 5380SW internal cover, 5045SW cleaning wand, 1823SW attachment clip\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe black and silver handle assembly for these two machines is 5640AM. On the X4 the hook is also sold as a set together with the carrying handle and stop spring under number 5768SW, which is the sensible option when both mouldings are tired.\u003c\/p\u003e\u003cp\u003eColour is what separates this listing from its neighbours rather than any difference in shape, so a black machine needs the black number even though the white and red hooks look identical from a distance.\u003c\/p\u003e\u003cp\u003eSearch phrases that reach this listing include SEBO X4 cord hook, AUTOMATIC X7 Pet cable hook, black cord storage hook, and 5703SW on its own. It is a genuine SEBO part, so it screws onto the original boss without packing, drilling or trimming, and the cord wraps to the same depth as it did when the machine was new. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214493966586,"sku":"5703SW","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/275d8808b54451b74f52908411575436.jpg?v=1786668356"},{"product_id":"cable-hook-for-x4-x5-and-x7-white","title":"SEBO Cable Hook for AUTOMATIC X4, X4 Boost, X5 and X7 Premium — White","description":"\u003cp\u003eOne white hook serves four machines: 5703WE goes on the AUTOMATIC X4, the X4 Boost, the X5 and the X7 Premium, all of which use the same moulding on a white body.\u003c\/p\u003e\u003cp\u003eThis is the catch that the mains lead wraps around for storage. A white version shows its age sooner than the darker trims, and a cracked one will often still grip a short coil while dropping a full wrap, so the fault seems to come and go before it becomes permanent. Replacing it removes the guesswork, and it also removes the habit that a failing hook encourages, which is leaving the cord loosely looped over the handle where it slides off and gets walked on.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4, X4 Boost, X5 and X7 Premium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5703WE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose:\u003c\/strong\u003e keeps the wrapped lead in place during storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite trim, identical fitment:\u003c\/strong\u003e 5160WE switch cap, 5721WE carrying handle, 5642AM handle with cord, tube and switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOn the X4, X4 Boost and X5 the hook also comes as a set with the carrying handle and stop spring under 5768WE, and the white bumper base for those three is 5702WE. Between them those numbers cover most of the white trim on the front and top of the machine.\u003c\/p\u003e\u003cp\u003eFitting takes a driver and no adjustment. If the old hook broke some time ago, check the cable itself along its whole length before winding it back on, because a lead that has spent months being dragged behind the machine often carries a nick in its jacket.\u003c\/p\u003e\u003cp\u003eCommon searches include SEBO X5 cable hook, AUTOMATIC X4 cord hook in white, X7 Premium cord wrap, and part 5703WE. Genuine SEBO moulding in the factory shade, supplied by an authorised dealer. Colour is the only thing separating these hooks from one another, so order by finish rather than by machine alone. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214494032122,"sku":"5703WE","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5703WE.jpg?v=1785142415"},{"product_id":"power-head-cover-complete-for-x4-red","title":"SEBO Power Head Cover for the AUTOMATIC X4 — Complete, Red","description":"\u003cp\u003eOver the brush roller and its drive sits a molded shell, and part 50778SE is that shell for a red AUTOMATIC X4, supplied complete rather than as separate pieces. It keeps grit off the belt and gears and gives the head its finished shape.\u003c\/p\u003e \u003cp\u003eCracks tend to start where the cover meets furniture or a doorframe, and once a clip has broken the head no longer closes down flat. Debris then finds a path onto the drive, and a stripped gear train is a far bigger repair than a cover. The warning most owners notice first is a rattle from the head at speed, followed by a cover that lifts at one corner when the machine is lowered onto carpet.\u003c\/p\u003e \u003cp\u003eWith the shell off, the drive is easy to inspect and the parts are all listed separately. The belt is 5110, the 12-inch brush roller is 5010AM with 5010GE as the soft-bristle alternative, and 8366WS is the tool SEBO sells for cutting hair and thread off a roller without taking it out of the machine. A worn belt fitted at the same time as a new cover saves opening the head twice in the same year.\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePart number: SEBO 50778SE\u003c\/li\u003e \u003cli\u003eColor: red\u003c\/li\u003e \u003cli\u003eFits: SEBO AUTOMATIC X4\u003c\/li\u003e \u003cli\u003eComplete top cover for the power head\u003c\/li\u003e \u003cli\u003eLook over the belt and roller while the head is open\u003c\/li\u003e \u003cli\u003eOther finish for the same machine: 50783SE in black\u003c\/li\u003e \u003cli\u003eRelated part numbers: 5110 belt, 5010AM and 5010GE brush rollers, 8366WS roller cleaning tool\u003c\/li\u003e \u003cli\u003eGenuine SEBO part from an authorized dealer; ships in 2-5 business days\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe matching red front cover for the same machine is 50751SE. For a black-bodied AUTOMATIC X4 the power head shell is 50783SE instead, so check the finish before ordering rather than going by the model name alone. Common searches include SEBO AUTOMATIC X4 power head cover, X4 brush head shell in red and SEBO part 50778SE.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214502453498,"sku":"50778SE","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/dd476402075959e74c3467402dfc82c5_b110bf6b-38b5-4ac9-a5da-f5d478359fd9.jpg?v=1786668125"},{"product_id":"power-head-cover-complete-for-x4-black","title":"SEBO Power Head Cover for the AUTOMATIC X4 — Complete, Black","description":"\u003cp\u003eBlack-bodied AUTOMATIC X4 machines take this cover. Part 50783SE caps the power head and encloses the roller drive and its wiring, arriving as one finished piece so nothing has to be moved across from the old shell.\u003c\/p\u003e \u003cp\u003eThe reason to change it is rarely cosmetic. A split shell or a snapped retaining tab lets the head sit proud of the base, and once dust starts reaching the gear train the wear rate climbs quickly. A sound cover keeps that side of the machine closed up, and it also keeps the wiring to the head out of the way of the roller itself, which is the failure nobody wants to discover the slow way.\u003c\/p\u003e \u003cp\u003eDamage here is almost always down to impact rather than age. The head is the part that meets stair risers, table legs and door thresholds, and a hard knock on a cold morning will crack the plastic where a warm one would not. Once a corner has gone, the remaining clips carry more load than they were meant to and the rest of the shell tends to follow within a season.\u003c\/p\u003e \u003cp\u003eBlack is a finish SEBO uses across a small group of accessories on this machine, so a cover replaced after an impact often goes in alongside the black attachment clip 1823SW and the black on-board cleaning wand 5045SW. Ordering those together keeps the machine looking of a piece rather than assembled from whatever was on the shelf.\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePart number: SEBO 50783SE\u003c\/li\u003e \u003cli\u003eColor: black\u003c\/li\u003e \u003cli\u003eFits: SEBO AUTOMATIC X4\u003c\/li\u003e \u003cli\u003eComplete power head cover assembly\u003c\/li\u003e \u003cli\u003eCheck the finish of your machine before ordering; this is the black version\u003c\/li\u003e \u003cli\u003eOther finish for the same machine: 50778SE in red\u003c\/li\u003e \u003cli\u003eRelated part numbers: 1823SW attachment clip, 5045SW cleaning wand, 5110 belt, 5010AM brush roller\u003c\/li\u003e \u003cli\u003eGenuine SEBO part supplied by an authorized dealer, shipping in 2-5 business days\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWhile the head is apart, the belt is part 5110 and the 12-inch brush roller is 5010AM, with 5010GE the soft-bristle version for smoother floors. Searches that arrive at this listing include SEBO X4 power head cover black, AUTOMATIC X4 brush head top shell and SEBO part 50783SE.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214502519034,"sku":"50783SE","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/13841e54bf36070119b8ff934e576443_131d44c3-5c9d-4327-a625-d8cf131621dd.jpg?v=1786668127"},{"product_id":"retaining-ring-single-for-x4-black-and-graphite-and-all-x7-x8-silver","title":"SEBO Retaining Ring, Single, for AUTOMATIC X4, X7 and X8 — Silver","description":"\u003cp\u003eBuy one silver retaining ring rather than ten. Order code 5424SB1 is the single-unit listing of the ring keeping a hose coupling locked into the machine, and it appears at position 37 of SEBO's AUTOMATIC X series exploded drawing, among the handle catch, carrying handle and stop spring making up that section of the body.\u003c\/p\u003e\u003cp\u003eThe repair itself is undramatic. The old ring lifts out of its groove, the new one presses in, and the coupling goes from a loose rattling fit back to a firm click. What justifies doing it promptly is what a failed ring gives away in the meantime: air pulled in at a joint that ought to be sealed never reaches the nozzle, so the machine works harder and lifts less.\u003c\/p\u003e\u003cp\u003eCheck the groove itself while the ring is out. Anything left in there — grit, a fragment of the old ring, a burr — will stop the new one seating fully, and a ring that is not fully home fails again quickly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder code:\u003c\/strong\u003e 5424SB1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCount:\u003c\/strong\u003e one ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShade:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachines covered:\u003c\/strong\u003e AUTOMATIC X4, AUTOMATIC X4 Boost\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso covered:\u003c\/strong\u003e AUTOMATIC X7 Premium, AUTOMATIC X7 Pet, AUTOMATIC X8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawn at:\u003c\/strong\u003e position 37\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeighbouring items:\u003c\/strong\u003e stop spring 5146, cable clamp 5266, seal 5842\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTen-pack:\u003c\/strong\u003e 5424SB\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSeated properly the ring lies flush the whole way around, with no lip standing above the groove. That flush seat is what keeps the coupling locked once the machine goes back into service.\u003c\/p\u003e\u003cp\u003eThe gray black version of this ring carries a different number, so check the finish on the machine first. Common searches include SEBO silver retaining ring, X7 hose coupling ring and AUTOMATIC X8 ring replacement. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214504222970,"sku":"5424SB1","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/6338261fd76e1cfd6902a70261332a13.jpg?v=1786668293"},{"product_id":"retaining-ring-10-pack-for-x4-black-and-graphite-and-all-x7-x8-silver","title":"SEBO Retaining Ring for AUTOMATIC X4, X7 and X8 — Silver, 10 Pack","description":"\u003cp\u003eSilver rather than gray black, and packed ten to a bag: 5424SB is the retaining ring SEBO fits to the darker-bodied uprights. On the AUTOMATIC X7\/X8 parts sheet it is drawn at position 33, in the same group as the stop spring at 32 and the cable hook at 31, among the small components clustered around the upper body.\u003c\/p\u003e\u003cp\u003eIts job is holding a hose coupling captive where it enters the machine, keeping that connection airtight while the vacuum works. Rings stiffen with age and with repeated coupling changes, and a split one lets the coupling creep loose. What shows up at the floor is weak pickup with nothing else to blame it on. A bag of ten means the fix is never the thing holding up a service.\u003c\/p\u003e\u003cp\u003eChoosing between the two finishes matters as much as choosing the number. Silver belongs on these machines, so a repair finished with the right ring looks factory rather than made-do, and the difference is visible every time the hose is unclipped.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder code:\u003c\/strong\u003e 5424SB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCount:\u003c\/strong\u003e ten rings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShade:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachines covered:\u003c\/strong\u003e AUTOMATIC X4, AUTOMATIC X4 Boost\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso covered:\u003c\/strong\u003e AUTOMATIC X7 Premium, AUTOMATIC X7 Pet, AUTOMATIC X8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawn at:\u003c\/strong\u003e position 33 on the AUTOMATIC X7\/X8 sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAround it there:\u003c\/strong\u003e stop spring 5146, cable hook 5703GS, attachment clip 1823SW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle ring:\u003c\/strong\u003e 5424SB1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOrdering ten also means the correct ring is on hand for the next machine through the door, whether that is an AUTOMATIC X4 Boost, an X7 Pet or an X8. All of them take the same silver ring, so one pack covers the whole group rather than three separate part lines.\u003c\/p\u003e\u003cp\u003eGenuine SEBO retaining rings in silver, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214504550650,"sku":"5424SB","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/19cbd65a8050b7d94d7cadd3b80f0b1d.jpg?v=1786668291"},{"product_id":"chassis-complete-without-support-screws-for-x4-gray-black-w-x1-include-5480-swivel-neck-support","title":"SEBO Chassis, Complete, for AUTOMATIC X4 and X1 — Gray Black","description":"\u003cp\u003eOrder code 5482GS is the full gray black chassis for the cleaning head, covering the AUTOMATIC X4, the X4 Boost and the AUTOMATIC X1. Support screws are not part of the supply. Everything else in the head hangs on this frame, which is why its condition governs how squarely the brush roll, the wheels and the motor all sit.\u003c\/p\u003e\u003cp\u003eFrames end their lives through impact more than age: a fall onto tile, a threshold hit at walking pace, or a decade of being backed into skirting boards and table legs. Once the moulding has twisted or split, the head no longer meets the floor evenly. The brush strip touches heavily at one end and barely at the other, the machine leans toward one side as it runs, and no amount of pile height adjustment corrects it. A structural crack is not a candidate for repair — the frame either holds the assembly true or it needs renewing.\u003c\/p\u003e\u003cp\u003eStrip the old frame methodically and lay the fasteners out in the order they come off. Since screws are not included here, keep the originals safe or have equivalents ready before starting, and check the swivel neck supports at the same time because they mount to this frame.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder code:\u003c\/strong\u003e 5482GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachines covered:\u003c\/strong\u003e AUTOMATIC X4, AUTOMATIC X4 Boost, AUTOMATIC X1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoulded in:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComes as:\u003c\/strong\u003e one complete frame, no support screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd on the X1:\u003c\/strong\u003e swivel neck support 5480\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated item:\u003c\/strong\u003e left-hand swivel neck support 5479\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSearches leading here include SEBO X4 chassis, AUTOMATIC X1 cleaning head frame and gray black chassis replacement.\u003c\/p\u003e\u003cp\u003eOne ordering note repays a second read: on the AUTOMATIC X1 this chassis is used together with swivel neck support 5480. Genuine SEBO chassis, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214510350586,"sku":"5482GS","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5482GS.jpg?v=1785148279"},{"product_id":"handle-grip-with-5161-5253-and-5359-for-x-series-gray-black","title":"SEBO Handle Grip for AUTOMATIC X Series Uprights — Gray Black","description":"\u003cp\u003eGray black is the finish that covers most of the AUTOMATIC line, which makes 5297GSAM the handle grip that fits the largest slice of it. It reaches you already built up with 5161, 5253 and 5359, so a cracked grip is exchanged rather than rebuilt piece by piece.\u003c\/p\u003e\u003cp\u003eSEBO catalogues it at position 2 of the AUTOMATIC X7 \/ X8 exploded diagram — handle grip, gray black, incorporating positions 7 and 9. Those two positions are the gray black switch cap holder 5161GS and the antistatic wire 5253UL, both preinstalled here. The rest of that corner of the diagram is the switchgear itself: the switch at position 5 and the switch cap at position 6, which is what you are working around when the grip comes apart.\u003c\/p\u003e\u003cp\u003eFitment covers the SEBO AUTOMATIC X1, X2, X4, X4 Boost, X5, X7 Premium and X8. The usual reason for ordering is a split at the tube entry after the machine has been carried up and down stairs by the grip for a few years, though a broken switch aperture is a close second. Other finishes carry their own numbers: 5295AM in black and 5297GSSE in graphite.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number 5297GSAM — handle grip, gray black\u003c\/li\u003e\n\u003cli\u003eSupplied preassembled with 5161, 5253 and 5359\u003c\/li\u003e\n\u003cli\u003eFits SEBO AUTOMATIC X1, X2, X4, X4 Boost, X5, X7 Premium and X8\u003c\/li\u003e\n\u003cli\u003eDiagram position 2, AUTOMATIC X7 \/ X8 breakdown, incorporating positions 7 and 9\u003c\/li\u003e\n\u003cli\u003ePositions 7 and 9 are switch cap holder 5161GS and antistatic wire 5253UL\u003c\/li\u003e\n\u003cli\u003eOther finishes: black 5295AM, graphite 5297GSSE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOne assembled grip is supplied. Because SEBO shares this grip across so much of the range, it is the number most AUTOMATIC owners end up needing, but the finish still decides it — confirm the machine is gray black rather than black or graphite before ordering. Common searches that land here include SEBO gray black handle grip, AUTOMATIC X5 handle replacement, and cracked SEBO upright handle.\u003c\/p\u003e\u003cp\u003eGenuine SEBO handle grip assembly supplied by an authorized dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214528930042,"sku":"5297GSAM","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/381032a1fa0c8e5ac30ab3fadf39c4b2_1531a641-950d-4eb1-8ad1-12d00f3f5033.jpg?v=1786668233"},{"product_id":"front-cover-seal-for-x4-and-x5-also-available-with-front-cover-complete-item-s-5749-or-5750","title":"SEBO Front Cover Seal for AUTOMATIC X4 and X5","description":"\u003cp\u003eSuction that never reaches the nozzle is usually escaping somewhere it should not, and the joint at the front cover is a common place for it to go. Order code 5454 is the seal closing that joint on the AUTOMATIC X4, the X4 Boost and the AUTOMATIC X5, drawn as item 11 on the AUTOMATIC X4\/X5 sheet.\u003c\/p\u003e\u003cp\u003eRubber held under constant compression takes a permanent set. After enough years the seal no longer stands proud enough to be squeezed when the cover shuts, or it has hardened until it splits along the compressed face. The cover, released by the catch at item 19 and carrying the moulding at item 17, then closes onto a broken sealing face instead of a continuous one. What you notice is a thin whistle at the seam while the machine runs, dust escaping at the cover edge, and airflow that has quietly fallen away with no blocked bag or filter to explain it.\u003c\/p\u003e\u003cp\u003eIt is one of the few genuinely simple restorations on these machines. The tired seal lifts out of its channel, the channel is wiped clean, and the new one presses in. Where the cover itself has cracked as well, the seal also forms part of the complete front cover assemblies, items 5749 and 5750.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder code:\u003c\/strong\u003e 5454\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachines covered:\u003c\/strong\u003e AUTOMATIC X4, AUTOMATIC X4 Boost, AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e closes the cover joint so air stays in the filtration path\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawn at:\u003c\/strong\u003e item 11 on the AUTOMATIC X4\/X5 sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso inside:\u003c\/strong\u003e complete front cover 5749 and 5750\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAround it there:\u003c\/strong\u003e cable clamp 5162, cover release 5706GS, cover 5707SW\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSeals are better changed on schedule than on symptom, because what they give away builds so gradually that nobody can name the day it started.\u003c\/p\u003e\u003cp\u003eGenuine SEBO front cover seal, dispatched in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214549999866,"sku":"5454","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/10d2b6e032c44a4c0076ddedbbe770f4.jpg?v=1786668302"},{"product_id":"sensor-with-pulley-and-screws-for-x4-g1-and-g4-has-yellow-ring","title":"SEBO Sensor with Pulley and Screws for AUTOMATIC X4 and ESSENTIAL G1, G4 — Yellow Ring","description":"\u003cp\u003eYellow ring on the collar is the identifier. Two SEBO sensors look alike sitting on a shelf and only the coloured ring separates them, so 5464 is the yellow-ringed unit for the AUTOMATIC X4 and X4 Boost and the ESSENTIAL G1 and G4. Its pulley and mounting screws are in the box, and the drawings place it at item 151 on the AUTOMATIC X4\/X5 sheet and item 157 on the ESSENTIAL G4\/G5 sheet.\u003c\/p\u003e\u003cp\u003eThat pulley explains the design. The unit is turned by the 2MR belt taken off the motor, which means it reads the drive itself rather than sitting to one side of it, and on the ESSENTIAL sheet it is drawn a few items away from the computer controller at 154. Trouble here therefore shows up in how the machine acts rather than in any noise it makes: erratic response to the controls, a running speed that wanders instead of holding, or a stop partway across a room with nothing blocked and nothing jammed.\u003c\/p\u003e\u003cp\u003eTwo checks are worth making before the new unit goes in. Confirm the belt is sound, since a belt that skips produces several of the same complaints, and confirm the ring colour on the old sensor matches the one ordered. Photograph every connector first: the replacement wants to go back on exactly the routing the factory used, and a picture turns reassembly into a five-minute job.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder code:\u003c\/strong\u003e 5464\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarked by:\u003c\/strong\u003e a yellow ring at the collar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e sensor, pulley, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachines covered:\u003c\/strong\u003e AUTOMATIC X4, AUTOMATIC X4 Boost, ESSENTIAL G1, ESSENTIAL G4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawn at:\u003c\/strong\u003e item 151 (AUTOMATIC X4\/X5) and item 157 (ESSENTIAL G4\/G5)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurned by:\u003c\/strong\u003e belt 5463, running off motor pulley 5462\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed-ringed alternative:\u003c\/strong\u003e 5465\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO sensor assembly, dispatched in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214554358010,"sku":"5464","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5464.jpg?v=1785153370"},{"product_id":"switch-cap-for-x4-red","title":"SEBO Switch Cap for AUTOMATIC X4 and X4 Boost — Red","description":"\u003cp\u003eRed is the correct cap colour for the AUTOMATIC X4 and X4 Boost that left the factory in that finish, and 5160DR is the moulding that goes back over the power rocker. SEBO's parts drawings list the dark red cap at position 6, alongside the other colours of the same part, so the number you order is decided by the machine in front of you rather than by the model name alone.\u003c\/p\u003e\u003cp\u003eCaps crack around their retaining lugs after years of being pressed with a shoe. Once one splits, the switch underneath is open to grit and lint and the action starts to feel vague — a press that used to click now needs a second push. A new cap closes the opening and gives back a definite action, and it goes on without tools. If the cap will not stay seated after fitting, the fault is the surround it clips into rather than the cap itself. The cap lifts off with a fingernail under one edge, so nothing is unscrewed and no wiring is disturbed to change one.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5160DR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 6, listed as the dark red switch cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e the cap alone, one per machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4 and AUTOMATIC X4 Boost\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurround it clips into:\u003c\/strong\u003e 5161GS in gray black; 5161SW in black also fits the AUTOMATIC X4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching red trim for the same machines:\u003c\/strong\u003e cable hook 5703DR, carrying handle 5721DR, bag housing 5755DR, exhaust filter cover 5711DR, latch release cover 5707DR, front cover 50751SE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSearches for a SEBO red switch cap, an X4 power button cover or a cracked on\/off cap all end at this part. Match the finish of your own machine before ordering: SEBO moulds the same cap in several colours, each under its own number. Genuine SEBO moulding in the factory finish, authorized dealer stock, ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214554489082,"sku":"5160DR","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/38b67100edb928cc9cbca79e6b2e4d54.jpg?v=1786668176"},{"product_id":"swivel-neck-support-r-h-w-1-screw-for-x4-use-w-5482gs-chassis","title":"SEBO Swivel Neck Support, Right-Hand, for AUTOMATIC X4 — Single-Screw Mount","description":"\u003cp\u003eOrder code 5480 is the right-hand support at the neck of an AUTOMATIC X4 or X4 Boost, the pivot translating a push at the handle into a turn at the floor. It takes a single screw, is the version matched to chassis 5482GS, and appears as item 109 on the AUTOMATIC X4\/X5 sheet, between the right-hand neck bearing 5101 at 108 and the left-hand support 5479 at 110.\u003c\/p\u003e\u003cp\u003eWhat fails is usually the plastic around the screw boss. Once that has cracked, or the screw has worked loose in it, the base and the handle stop being held in a fixed relationship, so the head wanders off the line you point it down and has to be pulled back constantly. The same drawing offers the neck assembly 5729UL at item 104, which takes in the bearings and related items as one unit where damage has gone beyond a single support.\u003c\/p\u003e\u003cp\u003eNote the cable route before lifting the tired support away. The replacement lands on the original screw point and the internal lead has to follow the same path, or it will be trapped when the neck is closed up. Cable clamp 2494 and contact holder 5176UL appear in that section of the sheet and are worth a look while the neck is open.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder code:\u003c\/strong\u003e 5480\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHanded:\u003c\/strong\u003e right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeld by:\u003c\/strong\u003e a single screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGoes with:\u003c\/strong\u003e chassis 5482GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachines covered:\u003c\/strong\u003e AUTOMATIC X4, AUTOMATIC X4 Boost\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawn at:\u003c\/strong\u003e item 109 on the AUTOMATIC X4\/X5 sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpposite side:\u003c\/strong\u003e 5479\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAround it there:\u003c\/strong\u003e neck bearing 5101, cable clamp 2494, neck assembly 5729UL\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRenewing one side while the other stays original is ordinary practice, though both have carried the same load across the same years and it is worth looking at the pair.\u003c\/p\u003e\u003cp\u003eGenuine SEBO service part, dispatched in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214557438202,"sku":"5480","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5480.jpg?v=1785140106"},{"product_id":"wheel-complete-for-x1-x2-and-x4-x5-gray-black","title":"SEBO Gray Black Wheel for AUTOMATIC X1, X2, X4, X4 Boost and X5","description":"\u003cp\u003eWheel 5819GS arrives complete in gray black — hub and tread moulded as one piece, with no bearing to press home and nothing to build up beforehand. SEBO marks it as item 119 on the AUTOMATIC X4 X5 parts diagram, and it is one of the few components carried straight across the upright family: the AUTOMATIC X1, X2, X4, X4 Boost and X5 all take it.\u003c\/p\u003e\u003cp\u003eReading the diagram around item 119 shows how the back of the chassis is put together, and decodes what the bigger assemblies contain. Item 118 is the axle, item 120 the return spring, item 121 the clamp. Item 116 is axle assembly 5051GS, and the note against it covers items 117 through 120 — meaning that assembly turns up with the wheels already on it, along with the orange foot pedal 5059OR from item 117 and the spring. Reach for that number when the axle itself has been bent and only the clamps get reused. Where the axle runs true and the fault is confined to the rolling surface, one wheel is the whole repair.\u003c\/p\u003e\u003cp\u003eSymptoms are easy to read from the handle. A tread that has flat-spotted, embedded grit or lost part of its rim skids rather than rotates, felt as extra effort on the forward stroke and heard as a tick once per turn. On hard flooring a broken rim can leave a trace behind the machine. On a high-mileage upright it makes sense to fit both sides at once, because a fresh wheel running against a worn one leaves the chassis marginally out of level and puts the difference through the newer part.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits\u003c\/strong\u003e — AUTOMATIC X1, AUTOMATIC X2, AUTOMATIC X4, AUTOMATIC X4 Boost, AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour\u003c\/strong\u003e — gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied\u003c\/strong\u003e — complete, one wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram\u003c\/strong\u003e — item 119\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber\u003c\/strong\u003e — 5819GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAround it\u003c\/strong\u003e — 5051GS axle assembly, 5059OR pedal, 5053 axle, 2010 spring, 2014 clamp singly or 2014ER in tens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight gray version\u003c\/strong\u003e — 5819HG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO wheel from an authorized dealer, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214560157946,"sku":"5819GS","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5819GS.jpg?v=1785139242"},{"product_id":"automatic-x4-white","title":"SEBO AUTOMATIC X4 Bagged Upright Vacuum – White","description":"\u003ch2\u003eAUTOMATIC X4: features and floor care\u003c\/h2\u003e\n\u003cp\u003eThe SEBO AUTOMATIC X4 is a bagged upright with electronic brush-height adjustment. It responds to brush resistance as you clean, while its integrated hose and wand give you quick access to furniture and room edges.\u003c\/p\u003e\n\u003cp\u003eThis listing is the White configuration, SEBO part 9570AM.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic head adjustment:\u003c\/strong\u003e Electronic sensing raises or lowers the head as brush resistance changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-inch head:\u003c\/strong\u003e A 10.5-inch cleaning path reaches along one side for edge cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40-foot cord:\u003c\/strong\u003e Cover adjoining rooms with fewer outlet changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose and wand:\u003c\/strong\u003e Three stored tools handle edges, furniture and crevices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService access:\u003c\/strong\u003e Remove the brush roller without tools; warning lights help identify airflow restrictions and worn bristles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncluded equipment\u003c\/h2\u003e\n\u003cp\u003eAUTOMATIC X4 upright vacuum; integrated hose and cleaning wand; crevice nozzle; dusting brush; upholstery nozzle.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel \/ MPN\u003c\/th\u003e\n\u003ctd\u003eAUTOMATIC X4 \/ 9570AM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower head width\u003c\/th\u003e\n\u003ctd\u003e12 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCleaning path\u003c\/th\u003e\n\u003ctd\u003e10.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrush height\u003c\/th\u003e\n\u003ctd\u003eElectronic automatic adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCord length\u003c\/th\u003e\n\u003ctd\u003e40 ft.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBag capacity\u003c\/th\u003e\n\u003ctd\u003e1.4 US gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiltration\u003c\/th\u003e\n\u003ctd\u003eS-class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReplacement bag\u003c\/th\u003e\n\u003ctd\u003e5093AM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower source\u003c\/th\u003e\n\u003ctd\u003eCorded electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatible bags and filters\u003c\/h2\u003e\n\u003cp\u003eOrder supplies specified for this model:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/filter-bag-box-x-g-c-300-350-and-370-1-piece-8-bags-with-caps\"\u003eSEBO 5093AM replacement bags (8-pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pre-motor-microfilter-for-x-g-and-300-350\"\u003eSEBO 5036AM pre-motor microfilter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/exhaust-filter-for-automatic-x4-x5-and-x1-x2\"\u003eSEBO 5143 X4 exhaust filter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/service-box-x4-x5-x1-x2-1-piece-8-bags-microfilter-exhaust-filter-and-sealing-strip\"\u003eSEBO 5828AM X4 service box: 8 bags, filters and sealing strip\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eReplace the bag when the machine indicates restricted airflow or the bag is full. Switch off and unplug before maintenance; close the bag’s sealing cap before disposal. Bags are disposable and should not be washed or reused.\u003c\/p\u003e\n\u003ch2\u003eBefore you choose\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eX4 or X4 Boost?\u003c\/strong\u003e The regular X4 has automatic height adjustment. The separate X4 Boost model adds a selectable setting for deeper brush agitation.\u003c\/p\u003e\u003cp\u003eFollow your flooring manufacturer’s care instructions for brush use and height settings. For delicate rugs or unusual carpet constructions, ask us to help match the machine and floor tool before ordering.\u003c\/p\u003e\n\u003ch2\u003eDealer support and warranty\u003c\/h2\u003e\n\u003cp\u003eVacuums and More offers complimentary extended coverage of 10 years on the motor, 10 years on parts and 7 years on labor for eligible residential purchases. Terms and exclusions apply; contact us for registration and coverage details.\u003c\/p\u003e\n","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214560551162,"sku":"9570AM","price":949.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/db1a7204d819bde62141cf03ff7d4852_53f0a794-b218-4d95-be12-da50f28009c8.jpg?v=1786667616"},{"product_id":"automatic-x4-black","title":"SEBO AUTOMATIC X4 Bagged Upright Vacuum – Black","description":"\u003ch2\u003eAUTOMATIC X4: features and floor care\u003c\/h2\u003e\n\u003cp\u003eThe SEBO AUTOMATIC X4 is a bagged upright with electronic brush-height adjustment. It responds to brush resistance as you clean, while its integrated hose and wand give you quick access to furniture and room edges.\u003c\/p\u003e\n\u003cp\u003eThis listing is the Black configuration, SEBO part 9501AM.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic head adjustment:\u003c\/strong\u003e Electronic sensing raises or lowers the head as brush resistance changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-inch head:\u003c\/strong\u003e A 10.5-inch cleaning path reaches along one side for edge cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40-foot cord:\u003c\/strong\u003e Cover adjoining rooms with fewer outlet changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose and wand:\u003c\/strong\u003e Three stored tools handle edges, furniture and crevices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService access:\u003c\/strong\u003e Remove the brush roller without tools; warning lights help identify airflow restrictions and worn bristles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncluded equipment\u003c\/h2\u003e\n\u003cp\u003eAUTOMATIC X4 upright vacuum; integrated hose and cleaning wand; crevice nozzle; dusting brush; upholstery nozzle.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel \/ MPN\u003c\/th\u003e\n\u003ctd\u003eAUTOMATIC X4 \/ 9501AM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower head width\u003c\/th\u003e\n\u003ctd\u003e12 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCleaning path\u003c\/th\u003e\n\u003ctd\u003e10.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrush height\u003c\/th\u003e\n\u003ctd\u003eElectronic automatic adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCord length\u003c\/th\u003e\n\u003ctd\u003e40 ft.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBag capacity\u003c\/th\u003e\n\u003ctd\u003e1.4 US gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiltration\u003c\/th\u003e\n\u003ctd\u003eS-class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReplacement bag\u003c\/th\u003e\n\u003ctd\u003e5093AM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower source\u003c\/th\u003e\n\u003ctd\u003eCorded electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatible bags and filters\u003c\/h2\u003e\n\u003cp\u003eOrder supplies specified for this model:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/filter-bag-box-x-g-c-300-350-and-370-1-piece-8-bags-with-caps\"\u003eSEBO 5093AM replacement bags (8-pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pre-motor-microfilter-for-x-g-and-300-350\"\u003eSEBO 5036AM pre-motor microfilter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/exhaust-filter-for-automatic-x4-x5-and-x1-x2\"\u003eSEBO 5143 X4 exhaust filter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/service-box-x4-x5-x1-x2-1-piece-8-bags-microfilter-exhaust-filter-and-sealing-strip\"\u003eSEBO 5828AM X4 service box: 8 bags, filters and sealing strip\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eReplace the bag when the machine indicates restricted airflow or the bag is full. Switch off and unplug before maintenance; close the bag’s sealing cap before disposal. Bags are disposable and should not be washed or reused.\u003c\/p\u003e\n\u003ch2\u003eBefore you choose\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eX4 or X4 Boost?\u003c\/strong\u003e The regular X4 has automatic height adjustment. The separate X4 Boost model adds a selectable setting for deeper brush agitation.\u003c\/p\u003e\u003cp\u003eFollow your flooring manufacturer’s care instructions for brush use and height settings. For delicate rugs or unusual carpet constructions, ask us to help match the machine and floor tool before ordering.\u003c\/p\u003e\n\u003ch2\u003eDealer support and warranty\u003c\/h2\u003e\n\u003cp\u003eVacuums and More offers complimentary extended coverage of 10 years on the motor, 10 years on parts and 7 years on labor for eligible residential purchases. Terms and exclusions apply; contact us for registration and coverage details.\u003c\/p\u003e\n","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214560583930,"sku":"9501AM","price":949.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/6ef810e7ea38389db291866957a54c93.jpg?v=1786667605"},{"product_id":"automatic-x4-boost-red","title":"SEBO AUTOMATIC X4 Boost Bagged Upright Vacuum – Red","description":"\u003ch2\u003eAUTOMATIC X4 Boost: features and floor care\u003c\/h2\u003e\n\u003cp\u003eThe AUTOMATIC X4 Boost combines electronic brush-height adjustment with a selectable setting for deeper carpet agitation. Choose it when you want the vacuum to adjust its head as you move between suitable surfaces, with extra brush action available when the cleaning job calls for it.\u003c\/p\u003e\n\u003cp\u003eThis listing is the Red configuration, SEBO part 90505AM.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA functional Boost button:\u003c\/strong\u003e Boost changes how the height-control system responds to brush resistance, allowing more aggressive brushing on suitable carpets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic height adjustment:\u003c\/strong\u003e The machine senses brush resistance and raises or lowers its head during cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy above-floor cleaning:\u003c\/strong\u003e An integrated hose, wand and three stored tools help clean edges and furnishings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService-friendly design:\u003c\/strong\u003e The brush roller removes without tools; warning lights help identify clogs, worn bristles and brush obstructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eS-class filtration:\u003c\/strong\u003e A replaceable bag, pre-motor filter and exhaust filter work together to capture dust. This configuration uses S-class filtration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncluded equipment\u003c\/h2\u003e\n\u003cp\u003eAUTOMATIC X4 Boost upright vacuum; integrated hose and cleaning wand; crevice nozzle; dusting brush; upholstery nozzle.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel \/ MPN\u003c\/th\u003e\n\u003ctd\u003eAUTOMATIC X4 Boost \/ 90505AM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower head width\u003c\/th\u003e\n\u003ctd\u003e12 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCleaning path\u003c\/th\u003e\n\u003ctd\u003e10.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrush height\u003c\/th\u003e\n\u003ctd\u003eElectronic automatic adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCord length\u003c\/th\u003e\n\u003ctd\u003e40 ft.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBag capacity\u003c\/th\u003e\n\u003ctd\u003e1.4 US gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiltration\u003c\/th\u003e\n\u003ctd\u003eS-class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReplacement bag\u003c\/th\u003e\n\u003ctd\u003e5093AM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower source\u003c\/th\u003e\n\u003ctd\u003eCorded electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatible bags and filters\u003c\/h2\u003e\n\u003cp\u003eOrder supplies specified for this model:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/filter-bag-box-x-g-c-300-350-and-370-1-piece-8-bags-with-caps\"\u003eSEBO 5093AM replacement bags (8-pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pre-motor-microfilter-for-x-g-and-300-350\"\u003eSEBO 5036AM pre-motor microfilter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/exhaust-filter-for-automatic-x4-x5-and-x1-x2\"\u003eSEBO 5143 X4 exhaust filter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/service-box-x4-x5-x1-x2-1-piece-8-bags-microfilter-exhaust-filter-and-sealing-strip\"\u003eSEBO 5828AM X4 service box: 8 bags, filters and sealing strip\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eReplace the bag when the machine indicates restricted airflow or the bag is full. Switch off and unplug before maintenance; close the bag’s sealing cap before disposal. Bags are disposable and should not be washed or reused.\u003c\/p\u003e\n\u003ch2\u003eBefore you choose\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does Boost mean?\u003c\/strong\u003e It is a brush-agitation setting operated by the button on the cleaning head. It does not describe a bag bundle or an increase in the suction motor's wattage.\u003c\/p\u003e\n\u003cp\u003eFollow your flooring manufacturer's care requirements when selecting brush height and using a rotating brush. Ask us for help with delicate rugs, unusual carpet constructions or accessory fit.\u003c\/p\u003e\n\u003ch2\u003eDealer support and warranty\u003c\/h2\u003e\n\u003cp\u003eVacuums and More offers complimentary extended coverage of 10 years on the motor, 10 years on parts and 7 years on labor for eligible residential purchases. Terms and exclusions apply; contact us for registration and coverage details.\u003c\/p\u003e\n","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214560649466,"sku":"90505AM","price":1049.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/85a4a60e5fbd4b277e64c4f910fb7c2a.jpg?v=1786667533"},{"product_id":"automatic-x4-boost-white","title":"SEBO AUTOMATIC X4 Boost Bagged Upright Vacuum – White","description":"\u003ch2\u003eAUTOMATIC X4 Boost: features and floor care\u003c\/h2\u003e\n\u003cp\u003eThe AUTOMATIC X4 Boost combines electronic brush-height adjustment with a selectable setting for deeper carpet agitation. Choose it when you want the vacuum to adjust its head as you move between suitable surfaces, with extra brush action available when the cleaning job calls for it.\u003c\/p\u003e\n\u003cp\u003eThis listing is the White configuration, SEBO part 90506AM.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA functional Boost button:\u003c\/strong\u003e Boost changes how the height-control system responds to brush resistance, allowing more aggressive brushing on suitable carpets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic height adjustment:\u003c\/strong\u003e The machine senses brush resistance and raises or lowers its head during cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy above-floor cleaning:\u003c\/strong\u003e An integrated hose, wand and three stored tools help clean edges and furnishings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService-friendly design:\u003c\/strong\u003e The brush roller removes without tools; warning lights help identify clogs, worn bristles and brush obstructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eS-class filtration:\u003c\/strong\u003e A replaceable bag, pre-motor filter and exhaust filter work together to capture dust. This configuration uses S-class filtration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncluded equipment\u003c\/h2\u003e\n\u003cp\u003eAUTOMATIC X4 Boost upright vacuum; integrated hose and cleaning wand; crevice nozzle; dusting brush; upholstery nozzle.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel \/ MPN\u003c\/th\u003e\n\u003ctd\u003eAUTOMATIC X4 Boost \/ 90506AM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower head width\u003c\/th\u003e\n\u003ctd\u003e12 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCleaning path\u003c\/th\u003e\n\u003ctd\u003e10.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrush height\u003c\/th\u003e\n\u003ctd\u003eElectronic automatic adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCord length\u003c\/th\u003e\n\u003ctd\u003e40 ft.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBag capacity\u003c\/th\u003e\n\u003ctd\u003e1.4 US gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiltration\u003c\/th\u003e\n\u003ctd\u003eS-class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReplacement bag\u003c\/th\u003e\n\u003ctd\u003e5093AM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower source\u003c\/th\u003e\n\u003ctd\u003eCorded electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatible bags and filters\u003c\/h2\u003e\n\u003cp\u003eOrder supplies specified for this model:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/filter-bag-box-x-g-c-300-350-and-370-1-piece-8-bags-with-caps\"\u003eSEBO 5093AM replacement bags (8-pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pre-motor-microfilter-for-x-g-and-300-350\"\u003eSEBO 5036AM pre-motor microfilter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/exhaust-filter-for-automatic-x4-x5-and-x1-x2\"\u003eSEBO 5143 X4 exhaust filter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/service-box-x4-x5-x1-x2-1-piece-8-bags-microfilter-exhaust-filter-and-sealing-strip\"\u003eSEBO 5828AM X4 service box: 8 bags, filters and sealing strip\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eReplace the bag when the machine indicates restricted airflow or the bag is full. Switch off and unplug before maintenance; close the bag’s sealing cap before disposal. Bags are disposable and should not be washed or reused.\u003c\/p\u003e\n\u003ch2\u003eBefore you choose\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does Boost mean?\u003c\/strong\u003e It is a brush-agitation setting operated by the button on the cleaning head. It does not describe a bag bundle or an increase in the suction motor's wattage.\u003c\/p\u003e\n\u003cp\u003eFollow your flooring manufacturer's care requirements when selecting brush height and using a rotating brush. Ask us for help with delicate rugs, unusual carpet constructions or accessory fit.\u003c\/p\u003e\n\u003ch2\u003eDealer support and warranty\u003c\/h2\u003e\n\u003cp\u003eVacuums and More offers complimentary extended coverage of 10 years on the motor, 10 years on parts and 7 years on labor for eligible residential purchases. Terms and exclusions apply; contact us for registration and coverage details.\u003c\/p\u003e\n","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214560682234,"sku":"90506AM","price":1049.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/9fe285ffeee7de4979649ed2e52b0564_505ba619-edd9-4481-9f07-6a86153dcd15.jpg?v=1786667543"},{"product_id":"service-box-x4-x5-x1-x2-1-piece-8-bags-microfilter-exhaust-filter-and-sealing-strip","title":"Genuine SEBO 5828AM X1, X2, X4 \u0026 X5 Service Box – 8 Bags \u0026 Filters","description":"\u003cp\u003eReplace the bags and service filters in your SEBO X1, X2, X4 or X5 with one matched kit. This genuine service box combines everyday bag refills with the microfilter, exhaust filter and sealing strip specified for these models.\u003c\/p\u003e\u003ch2\u003eWhat you receive\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e8 genuine SEBO filter bags with sealing caps\u003c\/li\u003e\n\u003cli\u003e1 microfilter\u003c\/li\u003e\n\u003cli\u003e1 exhaust filter\u003c\/li\u003e\n\u003cli\u003e1 sealing strip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatible SEBO models\u003c\/h2\u003e\u003cp\u003eAUTOMATIC X1, X2, X4, X4 Boost and X5.\u003c\/p\u003e\u003cp\u003eThe included filters fit the listed X1\/X2\/X4\/X5 models. For X7 or X8, choose service box 51828AM instead.\u003c\/p\u003e\u003ch2\u003ePart numbers and package labels\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e5828AM\u003c\/strong\u003e is the U.S. catalog reference for this service box. \u003cstrong\u003e5828ER\u003c\/strong\u003e is an alternate genuine SEBO reference for the same listed model fitment and kit contents. If your existing package says 5828AM or 5828ER, use the compatible-model list and the contents above to confirm your replacement. The different letter suffix alone does not mean it is the wrong kit.\u003c\/p\u003e\u003cp\u003eThis cross-reference applies specifically to 5828AM\/5828ER; it is not a rule that all SEBO numbers or carton codes are interchangeable.\u003c\/p\u003e\u003ch2\u003eWhen and how to replace bags and filters\u003c\/h2\u003e\u003cp\u003eFollow the bag-change indicator and instructions in your vacuum's manual. Fine dust can restrict airflow before a bag looks full. Switch off and unplug the vacuum, remove the used bag, close its sealing cap, and seat the new collar fully in the holder. Check that the bag is correctly positioned before closing the cover.\u003c\/p\u003e\u003cp\u003eReplace the filters according to your model's maintenance instructions. Do not wash disposable bags or filters. How long a box lasts depends on the debris collected and how often you clean.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering reference:\u003c\/strong\u003e 5828AM. Check the model name on your vacuum's rating label against the list above. If you need help, \u003ca href=\"\/pages\/contact\"\u003econtact Vacuums and More\u003c\/a\u003e with the model number before ordering.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214563500282,"sku":"5828AM","price":77.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/genuine-sebo-5828am-bags-service-box_269bd11b-70ff-484a-92c4-db436b7794d1.jpg?v=1789085426"},{"product_id":"hepa-service-box-x4-x5-x1-x2-1-piece-8-bags-hepa-microfilter-and-exhaust-filter","title":"Genuine SEBO 5827AM X1, X2, X4 \u0026 X5 HEPA Service Box – 8 Bags \u0026 Filters","description":"\u003cp\u003eService your SEBO X1, X2, X4 or X5 with genuine bags and the matching HEPA microfilter. The box also includes the exhaust filter, putting the correct replacement supplies together for the listed machines.\u003c\/p\u003e\u003ch2\u003eWhat you receive\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e8 genuine SEBO filter bags with sealing caps\u003c\/li\u003e\n\u003cli\u003e1 HEPA microfilter\u003c\/li\u003e\n\u003cli\u003e1 exhaust filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatible SEBO models\u003c\/h2\u003e\u003cp\u003eAUTOMATIC X1, X2, X4, X4 Boost and X5.\u003c\/p\u003e\u003cp\u003eThis kit's filters fit X1\/X2\/X4\/X5 models. For X7 or X8, choose HEPA service box 51829AM. The HEPA specification describes the included microfilter, not a separate certification of the complete vacuum.\u003c\/p\u003e\u003ch2\u003ePart numbers and package labels\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e5827AM\u003c\/strong\u003e is the U.S. catalog reference for this service box. \u003cstrong\u003e5827ER\u003c\/strong\u003e is an alternate genuine SEBO reference for the same listed model fitment and kit contents. If your existing package says 5827AM or 5827ER, use the compatible-model list and the contents above to confirm your replacement. The different letter suffix alone does not mean it is the wrong kit.\u003c\/p\u003e\u003cp\u003eThis cross-reference applies specifically to 5827AM\/5827ER; it is not a rule that all SEBO numbers or carton codes are interchangeable.\u003c\/p\u003e\u003ch2\u003eWhen and how to replace bags and filters\u003c\/h2\u003e\u003cp\u003eFollow the bag-change indicator and instructions in your vacuum's manual. Fine dust can restrict airflow before a bag looks full. Switch off and unplug the vacuum, remove the used bag, close its sealing cap, and seat the new collar fully in the holder. Check that the bag is correctly positioned before closing the cover.\u003c\/p\u003e\u003cp\u003eReplace the filters according to your model's maintenance instructions. Do not wash disposable bags or filters. How long a box lasts depends on the debris collected and how often you clean.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering reference:\u003c\/strong\u003e 5827AM. Check the model name on your vacuum's rating label against the list above. If you need help, \u003ca href=\"\/pages\/contact\"\u003econtact Vacuums and More\u003c\/a\u003e with the model number before ordering.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214564221178,"sku":"5827AM","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/genuine-sebo-5827er-bags-service-box_e44f82b7-94b4-4c78-b5af-a4f9ccfd65b9.jpg?v=1789085477"},{"product_id":"hepa-service-box-x4-x5-x1-x2-6-piece-carton-8-bags-hepa-microfilter-and-exhaust-filter","title":"Genuine SEBO 5827A1 X1, X2, X4 \u0026 X5 HEPA Service Box – 6-Box Case (48 Bags)","description":"\u003cp\u003eService your SEBO X1, X2, X4 or X5 with genuine bags and the matching HEPA microfilter. The box also includes the exhaust filter, putting the correct replacement supplies together for the listed machines.\u003c\/p\u003e\u003ch2\u003eWhat you receive\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eOne carton contains 6 individual boxes: 48 bags in total.\u003c\/strong\u003e The product photo shows one representative box and its contents; this listing is for the full 6-box case.\u003c\/p\u003e\u003cp\u003eEach box includes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8 genuine SEBO filter bags with sealing caps\u003c\/li\u003e\n\u003cli\u003e1 HEPA microfilter\u003c\/li\u003e\n\u003cli\u003e1 exhaust filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatible SEBO models\u003c\/h2\u003e\u003cp\u003eAUTOMATIC X1, X2, X4, X4 Boost and X5.\u003c\/p\u003e\u003cp\u003eThis kit's filters fit X1\/X2\/X4\/X5 models. For X7 or X8, choose HEPA service box 51829AM. The HEPA specification describes the included microfilter, not a separate certification of the complete vacuum.\u003c\/p\u003e\u003ch2\u003ePart numbers and package labels\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e5827AM\u003c\/strong\u003e is the U.S. catalog reference for this service box. \u003cstrong\u003e5827ER\u003c\/strong\u003e is an alternate genuine SEBO reference for the same listed model fitment and kit contents. If your existing package says 5827AM or 5827ER, use the compatible-model list and the contents above to confirm your replacement. The different letter suffix alone does not mean it is the wrong kit.\u003c\/p\u003e\u003cp\u003eThe AM\/ER references describe each individual service box inside this carton. Your order is still the 6-box case shown above. This cross-reference applies specifically to 5827AM\/5827ER; it is not a rule that all SEBO numbers or carton codes are interchangeable.\u003c\/p\u003e\u003ch2\u003eWhen and how to replace bags and filters\u003c\/h2\u003e\u003cp\u003eFollow the bag-change indicator and instructions in your vacuum's manual. Fine dust can restrict airflow before a bag looks full. Switch off and unplug the vacuum, remove the used bag, close its sealing cap, and seat the new collar fully in the holder. Check that the bag is correctly positioned before closing the cover.\u003c\/p\u003e\u003cp\u003eReplace the filters according to your model's maintenance instructions. Do not wash disposable bags or filters. How long a box lasts depends on the debris collected and how often you clean.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering reference:\u003c\/strong\u003e 5827A1; 6-box case. Check the model name on your vacuum's rating label against the list above. If you need help, \u003ca href=\"\/pages\/contact\"\u003econtact Vacuums and More\u003c\/a\u003e with the model number before ordering.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214564253946,"sku":"5827A1","price":569.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/genuine-sebo-5827er-bags-service-box_fc6fcb23-efb4-4ee1-a067-8711477c8839.jpg?v=1789085335"},{"product_id":"sealing-strip-for-x1-x4-and-x7","title":"SEBO 12 in. Sealing Strip for AUTOMATIC X1, X4, X4 Boost and X7","description":"\u003cp\u003eSuction at the nozzle is only ever as good as the seal against the floor, and part number 5400-1 is the 12 in. sealing strip that closes the gap along the base of the power head. SEBO draws it at position 136 on the sheet titled AUTOMATIC X4\/X5.\u003c\/p\u003e\u003cp\u003eRead the surrounding rows before ordering. Position 135 on that sheet carries two complete rear bottom plate assemblies, 5412GS and 5414GS, and both are listed as including position 136 along with the M4 x 12 screw at position 139 — order the plate and this strip arrives inside it, so the bare strip is the right line only when the plate itself is still sound. The neighbours place it: front bottom plate 5413GS at position 134, rubbing plate 5155GS at 125, pile adjustment wheel 5174GS at 132. The strip closes off the rear of the base so the air that the brush roller 5010AM stirs up is dragged through the pile and on into the bag housing instead of leaking in from behind.\u003c\/p\u003e\u003cp\u003eIt is a wear item by design, rubbing along carpet and hard floor on every pass. Once it hardens, curls, splits or simply thins, air starts entering where the machine wants it pulled through the fibres. Plenty of owners meet this part while chasing a loss of pickup that turns out to have nothing to do with the motor, the bag or the filters; the tell is a head that glides more easily than it used to while still leaving grit in the pile behind it. Worth inspecting whenever the brush roller is out of the machine. Wider bases take the 15 in. strip, 5400-2, instead.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSEBO part number:\u003c\/strong\u003e 5400-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 12 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawn at:\u003c\/strong\u003e position 136 on the AUTOMATIC X4\/X5 parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts to:\u003c\/strong\u003e the rear bottom plate, retained with the position 139 M4 x 12 screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e AUTOMATIC X1, AUTOMATIC X4, AUTOMATIC X4 Boost, AUTOMATIC X7 Premium and AUTOMATIC X7 Pet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWider equivalent:\u003c\/strong\u003e 5400-2, the 15 in. strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e single strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the edge is hardened, curled, split or visibly shorter than new\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold under several search phrasings: SEBO X4 sealing strip, AUTOMATIC X1 base plate seal, genuine SEBO 5400-1 nozzle seal replacement.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214568972538,"sku":"5400-1","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5400-1_9e8a83cc-77a8-4a09-a807-c7542f145197.jpg?v=1785147255"},{"product_id":"sebo-x1-x2-x4-x5-hepa-service-box-8-bags-hepa-exhaust-filters","title":"Genuine SEBO 5827AM X1, X2, X4 \u0026 X5 HEPA Service Box – 8 Bags \u0026 Filters","description":"\u003cp\u003eService your SEBO X1, X2, X4 or X5 with genuine bags and the matching HEPA microfilter. The box also includes the exhaust filter, putting the correct replacement supplies together for the listed machines.\u003c\/p\u003e\u003ch2\u003eWhat you receive\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e8 genuine SEBO filter bags with sealing caps\u003c\/li\u003e\n\u003cli\u003e1 HEPA microfilter\u003c\/li\u003e\n\u003cli\u003e1 exhaust filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatible SEBO models\u003c\/h2\u003e\u003cp\u003eAUTOMATIC X1, X2, X4, X4 Boost and X5.\u003c\/p\u003e\u003cp\u003eThis kit's filters fit X1\/X2\/X4\/X5 models. For X7 or X8, choose HEPA service box 51829AM. The HEPA specification describes the included microfilter, not a separate certification of the complete vacuum.\u003c\/p\u003e\u003ch2\u003ePart numbers and package labels\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e5827AM\u003c\/strong\u003e is the U.S. catalog reference for this service box. \u003cstrong\u003e5827ER\u003c\/strong\u003e is an alternate genuine SEBO reference for the same listed model fitment and kit contents. If your existing package says 5827AM or 5827ER, use the compatible-model list and the contents above to confirm your replacement. The different letter suffix alone does not mean it is the wrong kit.\u003c\/p\u003e\u003cp\u003eThis cross-reference applies specifically to 5827AM\/5827ER; it is not a rule that all SEBO numbers or carton codes are interchangeable.\u003c\/p\u003e\u003ch2\u003eWhen and how to replace bags and filters\u003c\/h2\u003e\u003cp\u003eFollow the bag-change indicator and instructions in your vacuum's manual. Fine dust can restrict airflow before a bag looks full. Switch off and unplug the vacuum, remove the used bag, close its sealing cap, and seat the new collar fully in the holder. Check that the bag is correctly positioned before closing the cover.\u003c\/p\u003e\u003cp\u003eReplace the filters according to your model's maintenance instructions. Do not wash disposable bags or filters. How long a box lasts depends on the debris collected and how often you clean.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer reference:\u003c\/strong\u003e 5827AM. \u003cstrong\u003eAlternate reference \/ stock code:\u003c\/strong\u003e 5827ER. Check the model name on your vacuum's rating label against the list above. If you need help, \u003ca href=\"\/pages\/contact\"\u003econtact Vacuums and More\u003c\/a\u003e with the model number before ordering.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":49014433710330,"sku":"5827ER","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/genuine-sebo-5827er-bags-service-box_6ec4316d-1c5e-4946-8d6b-f64d5033639f.jpg?v=1789085528"},{"product_id":"sebo-x4-handle-with-tube-cord-switch-black","title":"SEBO Handle Assembly with Tube, Cord and Switch for the Black AUTOMATIC X4 and X7 Pet — Black \/ Silver","description":"\u003cp\u003eBlack with silver, sold complete and already wired, 5640AM is the upper handle for black AUTOMATIC X4 and X4 Boost uprights and for the X7 Pet. SEBO puts the built-up assembly at item 1, the first entry on the parts breakdown for these machines.\u003c\/p\u003e\u003cp\u003eEverything an operator touches sits in this one section, which is why it shows age before the rest of the vacuum does. Any service counter knows the symptoms: a tube split around the grip, a switch you have to hit twice before the motor spins up, and a lead gone stiff or fraying at the point it enters the handle. One number answers all three, and since the finish matches the original black with silver, a completed repair leaves no trace. Working on the section as a unit also avoids the awkward part of the job, which is feeding fresh cable down a tube while trying to keep the antistatic wire and the clips in their proper places.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4, AUTOMATIC X4 Boost and AUTOMATIC X7 Pet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e tube, mains lead and switch, assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e black with silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e item 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5640AM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching black trim:\u003c\/strong\u003e 5295AM handle grip, 5161SW switch cap holder, 5721SW carrying handle, 5703SW cable hook, 1823SW attachment clip\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe silver switch cap used across these bodies is listed on its own as 5160SB, and the handle catch is 1859SB. Terms that lead shoppers here include SEBO X4 handle assembly, X4 Boost handle with cord and switch, AUTOMATIC X7 Pet handle replacement, and genuine SEBO handle 5640AM. Trim colour decides the number, so check yours before ordering; the white, red and yellow versions will not match a black machine.\u003c\/p\u003e\u003cp\u003eSold as a genuine SEBO assembly, not a generic tube and cord. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":49014910353658,"sku":"5640AM","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5640am-00_e970af12-c25a-474f-9c6a-16078e3d0f40.jpg?v=1785037202"},{"product_id":"sebo-handle-catch-for-x4-x5-370-grey-black-replacement","title":"SEBO Handle Catch for X4, X5 and the 370 — Dark Grey","description":"\u003cp\u003eStep on the pedal and the handle drops; stand the machine back up and it clicks home. The handle catch is what makes both of those things happen, and part 1859DG is the dark grey one for the SEBO X4 and X5 uprights and for the 370.\u003c\/p\u003e\u003cp\u003eIt is a wear item by design. Every park and every recline loads the same small latch, and on a machine used daily that is thousands of cycles a year against a moulding the size of a thumb. Colour is worth checking before you order, because SEBO has run this catch in more than one finish and the dark grey is what matches a dark grey handle assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: the SEBO X4, X5 and 370 uprights\u003c\/li\u003e\n\u003cli\u003eColour: dark grey\u003c\/li\u003e\n\u003cli\u003eJob: holds the handle upright when parked and releases it at the pedal\u003c\/li\u003e\n\u003cli\u003eOther finishes: listed separately as 1859GS, 1859SB and 1859SG, each with its own fitment\u003c\/li\u003e\n\u003cli\u003eInstallation: seats in the existing housing with no modification\u003c\/li\u003e\n\u003cli\u003eOrder as: SEBO part 1859DG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA tired catch announces itself clearly enough. The handle sags forward on its own while you are trying to work, or it refuses to click into place when the machine is stood up, or it needs a definite shove before it will let go. Some people get used to a machine that has to be nudged; the fix is one small moulding rather than a whole new upright.\u003c\/p\u003e\u003cp\u003eFitting one is straightforward with the machine unplugged and laid on its back, but photograph the spring and the catch in place before anything comes out, because the spring only works one way round. Look over the pedal linkage while you are in there: a catch that has been fighting a bent or stiff pedal will wear out again quickly.\u003c\/p\u003e\u003cp\u003eThis is the listing for anyone searching a SEBO X5 handle catch, an X4 handle latch replacement or genuine SEBO 1859DG. Check the finish against the handle you have before ordering, and inspect the pivot pin while the catch is out.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":49015239082234,"sku":"1859DG","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1859DG.jpg?v=1785163391"},{"product_id":"sebo-x1-x4-bumper-set-dark-grey-replacement-furniture-guards","title":"SEBO Bumper Set for X1 and X4 Uprights — Dark Grey","description":"\u003cp\u003eBumper trim is what stops an upright marking the skirting board and chipping its own housing. Part 5005DG is the dark grey bumper set for the SEBO X1 and the SEBO X4, supplying the matching trim pieces together in one purchase rather than sourcing them one at a time as each one fails.\u003c\/p\u003e\u003cp\u003eThe trim sits on the outside of the body, exactly where the machine meets the world. Steering an upright around table legs, through doorways and along a run of skirting puts every one of those knocks through the bumper first, and the moulding is there to take them so that the shell underneath does not. Trim hardens as it ages; once hardened it splits at the mounting points, works loose, and eventually drops off, and from that moment the machine is making shell-to-wall contact on every pass. The usual signs are fresh scuff marks appearing on painted skirting, a rattle from the front of the machine, or a visible gap where a piece of trim used to sit.\u003c\/p\u003e\u003cp\u003eBuying the trim as a set rather than piece by piece matters more than it first appears, because bumper mouldings fade and yellow at slightly different rates depending on where they sit on the body. Replacing one against three aged neighbours tends to look worse than leaving the damaged piece alone. Colour is also the thing that separates this part number from its neighbours in the SEBO range, so check your machine against the dark grey finish before ordering rather than going by the model name alone.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO X1 and X4 uprights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e a set of the matching bumper pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e cushions contact with walls, furniture and doorframes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e locates on the original fixing points, no modification needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5005DG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther finish:\u003c\/strong\u003e the same bumper set in gray black is SEBO 5005GS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAnyone searching for a SEBO X1 bumper set, an X4 furniture guard or a genuine SEBO 5005DG replacement is looking at the right part. It is a quick cosmetic job with a real protective purpose, and it keeps a machine that still works perfectly well from looking neglected. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":49015239606522,"sku":"5005DG","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5005dg-00_19e68bf8-d571-49fa-a598-eb20992f3386.jpg?v=1785039358"},{"product_id":"sebo-x4-chassis-without-support-screws-replacement-body","title":"SEBO X4 Chassis - Replacement Body Frame, Support Screws Not Included","description":"\u003cp\u003eSome X4 repairs start at the frame rather than at anything bolted to it, and 5482DG is that frame: the chassis every other assembly on a SEBO X4 hangs from and takes its alignment from. Motor, bottom plate and brush housing all reference it, and it absorbs the push load fed in through the nozzle on every stroke.\u003c\/p\u003e\u003cp\u003eIt arrives bare of fasteners, with no support screws in the box, so the existing hardware has to be kept and reused or the screws sourced in advance rather than discovered missing halfway through a strip-down. Frames crack or twist after a fall down a flight of stairs, or slowly, from years of the machine being dragged about by its head. Once the structure moves, the trouble spreads outward: sealing faces no longer meet squarely and airflow leaks past them, the brush meets carpet harder at one end than the other, and rattles appear that cannot be pinned on any single component. That last symptom is usually what leads an owner to suspect the frame at all.\u003c\/p\u003e\u003cp\u003eWorking on a straight chassis is what puts every other part back where the factory meant it to sit. Set expectations honestly before ordering: this is a full teardown and rebuild rather than a quick swap, and it earns its keep on an X4 whose motor and nozzle still have plenty of life left in them.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e the SEBO X4 upright\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e bare chassis, no support screws in the pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e load-bearing frame that every other assembly indexes from\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the frame is cracked or distorted and the machine flexes, leaks or runs noisy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5482DG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKeep the old hardware sorted and labelled as it comes off. While the X4 is apart, the white exhaust filter cover that fits the X4 is SEBO 5711GW, and a full set of bags and filters comes in HEPA service box SEBO 5827ER. SEBO's own chassis moulding, prepared for shipment in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":49015240130810,"sku":"5482DG","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5482dg-00_43a06e99-ed25-4524-8c88-3fe5c73f4afc.jpg?v=1785039364"},{"product_id":"sebo-x4-x5-exhaust-filter-cover-white","title":"SEBO Exhaust Filter Cover for X4 and X5 Uprights - White","description":"\u003cp\u003eLosing the panel over the exhaust filter leaves the element free to shift in its pocket, and once it moves, fine dust finds the gap around the edge instead of passing through the media. Part 5711GW is the white cover that replaces that panel on SEBO X4 and X5 uprights.\u003c\/p\u003e\u003cp\u003eIt clips over the exhaust compartment, holds the post-motor filter down against its seat, and directs the cleaned air out of the back of the machine. It also finishes the rear of the housing, so a cracked or absent one is obvious at a glance rather than something you have to hunt for. The failure modes are the ordinary ones for a clipped plastic part on an appliance that gets knocked about: a clip snapped during a filter change, a crack across the face after the machine went over on the stairs, or the cover simply lost somewhere after a service and never refitted.\u003c\/p\u003e\u003cp\u003eRunning without it is worse than it looks. The exhaust filter is the last stage before air returns to the room, and an element that is not held flat loads unevenly and lets a proportion of the airflow past its edge entirely. That is the whole sealed-system principle undone by a missing clip-on panel. The replacement snaps on without tools, so there is no reason to leave it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO X4 and X5 uprights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e white, as fitted from the factory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e holds the post-motor exhaust filter down on its seat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e snaps on, no tools required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the cover is cracked or missing, or the filter shifts in its pocket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5711GW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther finish:\u003c\/strong\u003e the dark blue exhaust filter cover for the X4 and X5 is SEBO 5711DB\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFit a fresh exhaust filter at the same time if the old one has gone grey, since a cover that has been loose for a while has usually let the filter work unevenly. Bags and filters for the X4 and X5 come together in HEPA service box SEBO 5827ER.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":49015240229114,"sku":"5711GW","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5711gw-00_6298529c-798c-4f47-905e-5e9c9ee1c395.jpg?v=1785039364"},{"product_id":"sebo-handle-grip-for-automatic-x4-and-x7-pet-black-preassembled","title":"SEBO Handle Grip for AUTOMATIC X4 and X7 Pet — Black, Preassembled","description":"\u003cp\u003eHandle grips fail where the tube enters them. Years of being used as the carrying handle on a staircase put a bending load on exactly that spot, and once the plastic opens up there the whole handle starts to feel vague in the hand. Part 5295AM is the black replacement grip, and it does not arrive as a bare shell — SEBO builds it up first with parts 5161, 5253 and 5359 already fitted.\u003c\/p\u003e\u003cp\u003eThe exploded diagram makes the content of that assembly explicit. SEBO lists the black handle grip at position 2 of the AUTOMATIC X7 \/ X8 sheet and notes that it incorporates positions 7 and 9, which are the switch cap holder in black, 5161SW, and the antistatic wire, 5253UL. Those are precisely the two small components that make a grip swap tedious when they have to be salvaged from the broken part, so having them preinstalled turns the repair into an exchange rather than a rebuild.\u003c\/p\u003e\u003cp\u003eColour is not interchangeable here. This is the black finish, and it is specified for the SEBO AUTOMATIC X4 and the AUTOMATIC X7 Pet. SEBO lists light gray, gray black and graphite grips separately for machines in those finishes, so check the machine before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number 5295AM — handle grip, black\u003c\/li\u003e\n\u003cli\u003eSupplied preassembled with 5161, 5253 and 5359\u003c\/li\u003e\n\u003cli\u003eFits the SEBO AUTOMATIC X4 and AUTOMATIC X7 Pet\u003c\/li\u003e\n\u003cli\u003eDiagram position 2, AUTOMATIC X7 \/ X8 breakdown, incorporating positions 7 and 9\u003c\/li\u003e\n\u003cli\u003ePositions 7 and 9 are switch cap holder 5161SW and antistatic wire 5253UL\u003c\/li\u003e\n\u003cli\u003eReplace when the grip has cracked at the tube entry or around the switch aperture\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOne grip is supplied, built up and ready to go onto the tube. Searches for a black SEBO handle grip, an AUTOMATIC X4 handle repair, or a cracked upright handle with the switch wiring included all land on this assembly.\u003c\/p\u003e\u003cp\u003eGenuine SEBO handle grip, authorized dealer stock, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":50068807876858,"sku":"5295AM","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/c8db21099f588f59315ffc28219d9c3e.jpg?v=1786666758"}],"url":"https:\/\/evacuumsandmore.com\/collections\/sebo-x4.oembed?page=2","provider":"Vacuums and More","version":"1.0","type":"link"}