{"title":"Sebo X5","description":null,"products":[{"product_id":"bearing-block-l-h-complete-for-x2-and-x5-internal","title":"SEBO Left-Hand Brush Roll Bearing Block for AUTOMATIC X2 and X5","description":"\u003cp\u003eThe left-hand end of a brush roll turns inside its own bearing block, and on the SEBO AUTOMATIC X2 and the AUTOMATIC X5 that block is part 5767HG. It is the internal left-hand unit, built up at the factory, so housing and bearing surface arrive as one piece rather than as components to press together on the bench.\u003c\/p\u003e\u003cp\u003eWound hair is what finishes these off. Thread and pet hair gather at the exposed shaft end, work past the seal, pack solid inside the bearing and drive out the grease that ought to be in there. The roll then feels notchy when spun by hand, whines under load, or sits fractionally out of line so the drive belt stops running square in its groove. Any of those symptoms alongside an undamaged belt points at the block rather than at the belt or the motor.\u003c\/p\u003e\u003cp\u003eLeft and right are separate castings and neither will stand in for the other. The right-hand side of these machines is served by its own numbers, 5031WE being the white right-hand block, and a second left-hand block is catalogued under 5766HG for different machines in the range — which is exactly why ordering against a part number beats ordering against a description.\u003c\/p\u003e\u003cp\u003eWhile the nozzle is apart, strip the wound debris off both shaft ends and off the roll itself. A new block dropped into a dirty head starts its life under the same attack that killed the last one, and the toothed belt that runs between the sensor and the bearing block deserves a look at the same time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachines:\u003c\/strong\u003e AUTOMATIC X2 and AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder code:\u003c\/strong\u003e 5767HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e left hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e complete internal block, nothing to assemble\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpposite side:\u003c\/strong\u003e 5031WE right-hand bearing block in white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorth ordering alongside:\u003c\/strong\u003e 5110 toothed belt, 5249WE brush cover in white, 5108 felt strip\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO stock; delivery in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473388282,"sku":"5767HG","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5767HG.jpg?v=1785146413"},{"product_id":"rear-bottom-plate-complete-for-x2-and-x5-gray-black","title":"SEBO Rear Bottom Plate, Complete, for AUTOMATIC X2 and X5 — Gray Black","description":"\u003cp\u003eTurn an AUTOMATIC X2 or X5 cleaning head over and the rear bottom plate is the panel behind the brush opening, the one sliding across the floor every time the machine is pushed forward. SEBO draws it as item 135 and lists it under 5414GS in gray black, arriving with the parts shown at items 136 and 139 already in place.\u003c\/p\u003e\u003cp\u003eBecause those two smaller items travel with it, the repair is one order rather than three. The plate does a pair of jobs at once. It keeps the back of the head flat against the floor, and it closes the rear of the air path so suction is drawn through the brush opening and nowhere else. Once the plastic has worn thin, split across a mounting tab or lost its seal, the head begins to sit unevenly and air finds a way in behind the brush roll instead of under it. Pickup falls off across the full width of the machine even though motor, bag and filters are all sound.\u003c\/p\u003e\u003cp\u003eWear here is easy to judge by eye. Rest the plate on a flat surface and watch for a rocking edge, then run a fingernail over the tabs to check that none have sheared. Hard-floor use polishes the panel smooth; carpet work tends to crack it around the fixings. Either pattern calls for the same moulding.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder code:\u003c\/strong\u003e 5414GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachines covered:\u003c\/strong\u003e AUTOMATIC X2, AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoulded in:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComes as:\u003c\/strong\u003e a complete assembly, taking in the items drawn at 136 and 139\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSheet reference:\u003c\/strong\u003e item 135, AUTOMATIC X4\/X5 drawing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront counterpart:\u003c\/strong\u003e 5413GS at item 134\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTerms leading here include SEBO rear bottom plate, AUTOMATIC X2 base plate and X5 sole plate replacement. Sold as a genuine SEBO service part and dispatched within 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214476763386,"sku":"5414GS","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5414GS_6167c474-2c0e-4570-aa01-04f7817fc203.jpg?v=1785144651"},{"product_id":"bumper-set-for-x2-and-x5-gray-black","title":"SEBO Bumper Set for AUTOMATIC X2 and X5 — Gray Black","description":"\u003cp\u003eBumper trim is the sacrificial layer on an upright: the part that is meant to wear so the housing underneath keeps its shape. On the AUTOMATIC X2 and the AUTOMATIC X5 that layer is gray black, and 5230GS is the replacement set for both machines.\u003c\/p\u003e\u003cp\u003eAge does most of the damage. The material stiffens over several seasons, then a corner takes a hard knock against a door frame and splits rather than flexing, and from that point the section works its way loose at one end. What follows is predictable: bare plastic meeting furniture legs and painted skirting, and marks appearing on both. Renewing the trim restores the cushioned edge and quietly tidies up a machine that has started to look battered — each piece seats in the location the factory item came out of, with no cutting, drilling or adhesive needed.\u003c\/p\u003e\u003cp\u003eMatch the colour as well as the number. Gray black is the finish specified for the SEBO AUTOMATIC X2 and AUTOMATIC X5, and trim is the most visible component on the machine, so a substituted shade is obvious the moment the vacuum is stood up in a hallway.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number 5230GS — bumper set\u003c\/li\u003e\n\u003cli\u003eColour and finish: gray black\u003c\/li\u003e\n\u003cli\u003eFits the SEBO AUTOMATIC X2 and AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003eJob: cushions contact with furniture, walls and door frames\u003c\/li\u003e\n\u003cli\u003eFitting: seats in the original mounting positions\u003c\/li\u003e\n\u003cli\u003eReplace when a section is split, hardened, hanging loose or lost\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTrim is also the first thing anyone notices on a second-hand machine, so this is a sensible set to fit before a vacuum is sold on or handed down to a family member. There is no alignment to get right and no adjustment afterwards: each section locates positively and stays where it is put.\u003c\/p\u003e\u003cp\u003eListed for shoppers looking for an AUTOMATIC X2 bumper, an X5 bumper replacement or a genuine SEBO body trim set. Supplied by an authorized SEBO dealer, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214477091066,"sku":"5230GS","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5230GS.jpg?v=1709347845"},{"product_id":"cover-release-for-x4-x5-g1-and-g2-gray-black","title":"SEBO Cover Release for AUTOMATIC X4, X5 and ESSENTIAL G1\/G2 — Gray Black","description":"\u003cp\u003eEvery bag change on these machines begins with the cover release, and 5706GS is the gray black one. SEBO shows it at item 19 of the AUTOMATIC X4\/X5 drawing, working against the return spring 5210 that sits a few positions along at 29.\u003c\/p\u003e\u003cp\u003eThe catch is handled at every single bag change, and its engaging tab slowly rounds over. Once that happens the release either loses its grip, letting the cover rise under vibration and breaking the seal around the bag chamber, or it binds so tightly that the door has to be forced open each time. Suction complaints that survive a fresh bag and clean filters often come back to this one moulding, because a cover held a fraction proud leaks air the whole time the motor runs. A new release pulls the cover down onto its gasket the way it should.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4, X4 Boost and X5, plus ESSENTIAL G1 and G2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e item 19, AUTOMATIC X4\/X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5706GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternative finishes:\u003c\/strong\u003e 5706SB in silver for the X4 and X4 Boost, 5706SG in yellow for the X4 and X5\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe moulded cover that caps the latch is a separate number and colour-specific: 5707WE in white, 5707DB in dark blue and 5707SW in black.\u003c\/p\u003e\u003cp\u003eOne release covers both the X series and the smaller ESSENTIAL machines here, which is convenient for anyone running more than one SEBO. It is the same moulding across all of them, and it fits the original mounting without modification.\u003c\/p\u003e\u003cp\u003eSearches for a SEBO X4 bag door latch, an ESSENTIAL G1 cover release, an X5 bag compartment catch, or part 5706GS by number all arrive here. Genuine SEBO moulding, supplied by an authorised dealer. If the catch has snapped rather than worn, look at the return spring behind it before reassembly, since a spring that has lost tension will chew through a new release just as quickly. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214479188218,"sku":"5706GS","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5706GS.jpg?v=1785163543"},{"product_id":"handle-with-cord-tube-and-switch-for-white-x4-x5-and-x7-gray-black-white","title":"SEBO Handle with Cord, Tube and Switch for AUTOMATIC X4, X4 Boost, X5 and X7 Premium — Gray Black \/ White","description":"\u003cp\u003eWhite-trimmed machines take the gray black and white handle, and 5642AM supplies it complete: grip, tube, internal wiring and switch built up as one part. SEBO shows the assembled handle at item 1, the very first entry on its exploded parts drawing, directly above the switch cap and the cable clamps that follow it.\u003c\/p\u003e\u003cp\u003eIntermittent running is the usual reason this number gets ordered. A conductor broken inside the lead will make contact at one handle angle and drop it at another, and a switch that has been worked for years produces the same fault from a different cause. Fitting the built-up section rules out the cable, the switch and the wiring together, and it saves splicing a fresh cord onto a worn switch or feeding new wire down a tube that has already split. On a machine used daily, that is one repair instead of three visits to the same casing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4, X4 Boost, X5 and X7 Premium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e gray black with white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e grip, tube, cord and switch, pre-wired\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e item 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5642AM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite trim, identical fitment:\u003c\/strong\u003e 5160WE switch cap, 5703WE cable hook, 5721WE carrying handle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTrim colour decides the part number here, so compare your machine against the photograph before ordering; the silver, red and yellow versions each carry a number of their own and will not match a white-trimmed body. If only the grip has been damaged, the gray black grip on its own is 5297GSAM, and the switch behind the cap is 05113.\u003c\/p\u003e\u003cp\u003eTypical searches include SEBO X5 handle assembly, AUTOMATIC X4 handle with cord and switch, X7 Premium handle replacement, and genuine SEBO handle 5642AM. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214485643514,"sku":"5642AM","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1595dc7ffaebe63966c9d0cc11e65fd7.jpg?v=1786668332"},{"product_id":"handle-with-cord-tube-and-switch-for-dark-blue-x4-and-x5-gray-black-yellow","title":"SEBO Handle with Cord, Tube and Switch for AUTOMATIC X4 and X5 — Gray Black \/ Yellow","description":"\u003cp\u003eYellow is the accent colour SEBO gave the dark blue AUTOMATIC X4 and X5 uprights, and 5647AM is the upper handle built to suit them: gray black with yellow, and it arrives with the tube, the cord and the switch already fitted.\u003c\/p\u003e\u003cp\u003eA vacuum that only keeps running while its handle is held at one exact angle has lost a conductor somewhere in the cable between plug and switch. Tape and heat-shrink never hold that repair for long, because the wire carries on flexing at the same spot every time the machine is folded. Changing the complete section removes the doubt in one go: fresh cable, fresh switch, fresh tube, all sitting in the positions the factory intended. It is also the tidier outcome, because there is no join left inside the tube to be found again by whoever services the machine next.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4 and AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5647AM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e gray black with yellow accents\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e grip, tube, cord and switch, wired\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYellow trim, same machines:\u003c\/strong\u003e 5160SG switch cap, 1859SG handle catch, 5706SG cover release, 5722SG bag housing catch, 5730SG display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDark blue panels:\u003c\/strong\u003e 5702DB bumper base, 5711DB exhaust filter cover, 5713DB brush roller release\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch the accent colour to your machine before ordering, since the white, red and silver versions are separate listings altogether. Searches such as SEBO X5 handle assembly, AUTOMATIC X4 handle with cord and switch, yellow switch handle, or simply 5647AM all lead to this listing. If the machine has been sitting unused, look over the cord along its full length as well; a lead cut by a vacuum wheel is a separate part number.\u003c\/p\u003e\u003cp\u003eGenuine SEBO assembly, supplied by an authorised dealer rather than pulled from a used machine, and it ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214485807354,"sku":"5647AM","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5647AM_3d2246a2-aafd-4159-8718-9be0ea4ede83.jpg?v=1785138983"},{"product_id":"dust-bag-housing-bumper-base-for-x4-and-x5-dark-blue","title":"SEBO Bag Housing Bumper Base for AUTOMATIC X4 and X5 — Dark Blue","description":"\u003cp\u003eThe strip of moulding that runs along the foot of the bag housing is the first part of an upright to meet a baseboard, and dark blue AUTOMATIC X4 and X5 machines use 5702DB for it. SEBO's AUTOMATIC X4\/X5 drawing carries the bumper base at item 47, between the locking rod 5083 at 46 and the bag housing itself at 48.\u003c\/p\u003e\u003cp\u003eBumpers are meant to be sacrificial. They deform, take the energy out of an impact and keep it away from the shell behind them, and after enough seasons of that treatment the plastic hardens, tears away from its fixing tabs and finally drops off. From then on every knock arrives directly on the housing, and splitting one of those means changing a much bigger moulding. A new strip puts the buffer back and tidies the front of the machine while it is at it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4 and AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSits:\u003c\/strong\u003e across the lower front edge of the bag housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e item 47, AUTOMATIC X4\/X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5702DB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther dark blue panels:\u003c\/strong\u003e 5749SE front cover, 5755DB bag housing, 5711DB exhaust filter cover, 5713DB brush roller release, 5768DB cable hook with carrying handle and stop spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLook over the mounting tabs on the housing while the old strip is off, because a tab that has broken away will leave the new bumper standing proud and it will be knocked off again in short order.\u003c\/p\u003e\u003cp\u003eThe same moulding in other finishes is 5702WE in white, 5702GS in gray black and 5702SW in black. Shoppers searching for a SEBO X4 bumper strip, an AUTOMATIC X5 dust bag housing bumper, a dark blue bumper trim, or the number 5702DB on its own have found the right listing. Genuine SEBO spare, supplied by an authorised dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214493081850,"sku":"5702DB","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/27d09a3c7c1705da5ac2023fd8f8131b.jpg?v=1786668338"},{"product_id":"dust-bag-housing-bumper-base-for-x4-and-x5-white","title":"SEBO Bag Housing Bumper Base for AUTOMATIC X4, X4 Boost and X5 — White","description":"\u003cp\u003eWhite-bodied AUTOMATIC X4, X4 Boost and X5 uprights take 5702WE at the foot of the bag housing. SEBO lists it as item 47 on the AUTOMATIC X4\/X5 sheet, sitting between the locking rod 5083 at position 46 and the complete bag housing at position 48.\u003c\/p\u003e\u003cp\u003eA white moulding shows its years more plainly than a dark one. The colour goes off first, the material stiffens next, and eventually it splits where it has taken the most hits, at which point the bumper is cushioning nothing. Renewing it guards the shell underneath and visibly freshens the front of the vacuum. There is nothing to adjust afterwards, since the strip locates on its own tabs and the housing does the aligning. White also makes damage obvious early, which is a small advantage: the strip is usually changed before the shell behind it has taken any punishment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4, X4 Boost and X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e item 47, AUTOMATIC X4\/X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5702WE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite panels with the same fitment:\u003c\/strong\u003e 50750SE front cover, 5755WE bag housing, 5711WE exhaust filter cover, 5712WE exhaust filter catch, 5713WE brush roller release, 5768WE cable hook with carrying handle and stop spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe front cover seal 5454 fits the same three machines and is worth renewing while the front of the vacuum is apart, since a hardened seal costs suction in the same quiet way a lifted cover does.\u003c\/p\u003e\u003cp\u003eDark blue, gray black and black bumper bases carry the numbers 5702DB, 5702GS and 5702SW. Searches for a SEBO X5 bumper base, a white dust bag housing bumper, an X4 Boost bumper strip, or part 5702WE all arrive here. Supplied as a genuine SEBO moulding by an authorised dealer, it ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214493180154,"sku":"5702WE","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3b02f02b6845f891a2175c9e9d220863.jpg?v=1786668348"},{"product_id":"cable-hook-for-x4-x5-and-x8-dark-blue","title":"SEBO Cable Hook for AUTOMATIC X4, X5 and X8 — Dark Blue","description":"\u003cp\u003eWinding several yards of mains cable puts real leverage on a catch not much bigger than a thumbnail, which is why cord hooks are a routine replacement. 5703DB is the dark blue one, shared by the AUTOMATIC X4, the X5 and the X8.\u003c\/p\u003e\u003cp\u003eFailure comes at the root of the moulding, where years of daily winding have worked the plastic back and forth. What follows is more than untidiness: an unsecured cable drags along behind the vacuum, gets pinched under its wheels and loses its outer jacket far earlier than it should. Refitting a hook at the original mounting point puts the coil back where it belongs, high on the body and clear of the floor, and it takes one screw and a couple of minutes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4, AUTOMATIC X5 and AUTOMATIC X8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5703DB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e keeps the coiled lead secured while the machine is stored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching dark blue part:\u003c\/strong\u003e 5721DB carrying handle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOn the X4 and X5 the hook is also sold as a set together with the carrying handle and stop spring under number 5768DB, which is the tidier route when both mouldings have aged at the same rate and neither looks likely to see out another year.\u003c\/p\u003e\u003cp\u003eOne moulding covering three machines is useful for a household or a small cleaning round running a mixed fleet, since the same spare suits whichever of them breaks first. It is worth keeping one on the shelf for that reason alone, as a hook tends to snap at the least convenient moment, part-way through a job with the cable already out.\u003c\/p\u003e\u003cp\u003eSearches that lead here include SEBO X8 cable hook, AUTOMATIC X4 cord hook, X5 cord storage hook in dark blue, and the number 5703DB on its own. Genuine SEBO moulding rather than a generic clip, and it ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214493835514,"sku":"5703DB","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/e08112371ad614debc2b38b853bff55c.jpg?v=1786668351"},{"product_id":"cable-hook-for-x4-x5-and-x7-white","title":"SEBO Cable Hook for AUTOMATIC X4, X4 Boost, X5 and X7 Premium — White","description":"\u003cp\u003eOne white hook serves four machines: 5703WE goes on the AUTOMATIC X4, the X4 Boost, the X5 and the X7 Premium, all of which use the same moulding on a white body.\u003c\/p\u003e\u003cp\u003eThis is the catch that the mains lead wraps around for storage. A white version shows its age sooner than the darker trims, and a cracked one will often still grip a short coil while dropping a full wrap, so the fault seems to come and go before it becomes permanent. Replacing it removes the guesswork, and it also removes the habit that a failing hook encourages, which is leaving the cord loosely looped over the handle where it slides off and gets walked on.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4, X4 Boost, X5 and X7 Premium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5703WE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose:\u003c\/strong\u003e keeps the wrapped lead in place during storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite trim, identical fitment:\u003c\/strong\u003e 5160WE switch cap, 5721WE carrying handle, 5642AM handle with cord, tube and switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOn the X4, X4 Boost and X5 the hook also comes as a set with the carrying handle and stop spring under 5768WE, and the white bumper base for those three is 5702WE. Between them those numbers cover most of the white trim on the front and top of the machine.\u003c\/p\u003e\u003cp\u003eFitting takes a driver and no adjustment. If the old hook broke some time ago, check the cable itself along its whole length before winding it back on, because a lead that has spent months being dragged behind the machine often carries a nick in its jacket.\u003c\/p\u003e\u003cp\u003eCommon searches include SEBO X5 cable hook, AUTOMATIC X4 cord hook in white, X7 Premium cord wrap, and part 5703WE. Genuine SEBO moulding in the factory shade, supplied by an authorised dealer. Colour is the only thing separating these hooks from one another, so order by finish rather than by machine alone. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214494032122,"sku":"5703WE","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5703WE.jpg?v=1785142415"},{"product_id":"front-cover-complete-for-x4-and-x5-white","title":"SEBO Front Cover for the AUTOMATIC X4, X4 Boost and X5 — Complete, White","description":"\u003cp\u003eWhite bodywork shows every scuff, which is why the front panel is often the first part of an AUTOMATIC X to look past its best. Part 50750SE is the full white cover: it closes over the dust bag compartment and forms the front face of the upright.\u003c\/p\u003e \u003cp\u003eThere is a functional reason to change it as well as a cosmetic one. A panel cracked at the pivot or missing its latch will not pull the compartment shut against its seal, and a bag chamber that does not close tightly draws air in at the door instead of through the floor head. Suction at the nozzle falls away even with a fresh bag fitted, which sends plenty of owners looking at filters and hoses before they think to look at the door.\u003c\/p\u003e \u003cp\u003eOf the three front covers in this family, the white one has the broadest fitment: it covers the AUTOMATIC X4, the X4 Boost and the X5. The same panel in red is 50751SE and in graphite it is 50747SE, so a machine in another finish can still be put right with the correct number. The white power head shell for the X4 Boost, at the other end of the machine, is 50799WE.\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePart number: SEBO 50750SE\u003c\/li\u003e \u003cli\u003eColor: white\u003c\/li\u003e \u003cli\u003eFits: SEBO AUTOMATIC X4, AUTOMATIC X4 Boost and AUTOMATIC X5\u003c\/li\u003e \u003cli\u003eSupplied complete and ready to hang on the machine\u003c\/li\u003e \u003cli\u003eCovers and seals the dust bag compartment\u003c\/li\u003e \u003cli\u003eOther finishes: 50751SE in red, 50747SE in graphite\u003c\/li\u003e \u003cli\u003eRelated part numbers: 5324 bag holder, 5360 safety catch, 5143 exhaust filter\u003c\/li\u003e \u003cli\u003eGenuine SEBO panel from an authorized dealer; ships in 2-5 business days\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWhile the compartment is open, the bag holder is part 5324 and the safety catch that trips when a bag is missing is 5360 — both worth checking, since a door that has been forced shut over the years tends to have strained them too. Consumables for the same machines include the service box 5828AM, the HEPA service box 5827AM and the exhaust filter 5143.\u003c\/p\u003e \u003cp\u003eThis listing answers searches for a SEBO AUTOMATIC X5 front cover, an X4 white bag door, an X4 Boost front panel and SEBO part 50750SE.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214498717946,"sku":"50750SE","price":51.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/d9d97f0ed69e5f3c82838450471f03d1_bca01120-46a1-4afd-9769-4cc0a8675f83.jpg?v=1786668120"},{"product_id":"power-head-cover-complete-for-x5-white","title":"SEBO Complete Power Head Cover in White for AUTOMATIC X5","description":"\u003cp\u003eSEBO stocks the upper moulding of the cleaning head on a white AUTOMATIC X5 under 5791SE, and supplies it as a finished assembly rather than a bare panel. It closes the brush chamber, gives the nozzle its visible upper surface and holds the decorative strip along the leading edge.\u003c\/p\u003e\u003cp\u003eVery few of these wear out. They break. Around each mounting boss the wall thickness is at its lowest, so an encounter with a stair nosing or a table leg starts a fracture there, and once one has opened the shell begins to flex under load instead of bracing the two sides of the head against each other. The strip along the front then lifts where the crack runs beneath it, dust starts collecting in the opening, and what should be a closed enclosure over a turning roller no longer is. Bonding the break tends to fail again in the same spot, because whatever load created it is still being applied. Buying the assembly complete puts the mouldings and their fixings on the bench together, which is considerably faster than tracking down individual pieces with the head already in bits.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits\u003c\/strong\u003e — AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour\u003c\/strong\u003e — white, as the machine left the factory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber\u003c\/strong\u003e — 5791SE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied\u003c\/strong\u003e — power head cover, complete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChange it when\u003c\/strong\u003e — the shell has cracked, a fixing point has sheared, or the trim no longer lies flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite parts in the same head\u003c\/strong\u003e — exhaust filter cover 5711WE, exhaust filter catch 5712WE, brush roller release 5713WE, brush cover release 5714WE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRest of the white bodywork\u003c\/strong\u003e — front cover 50750SE, dust bag housing 5755WE, bumper base 5702WE, right-hand bearing block 5031WE, cable hook kit 5768WE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBoth the model and the finish decide which SEBO power head cover is correct, since every upright in the range uses a shell of its own and each colour is listed under a separate number. Check the badge, not just the paintwork. Pull the plug and wait for the roller to stop before opening anything, then unclip the trim rather than levering against it. Genuine SEBO from an authorized dealer, moving in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214503928058,"sku":"5791SE","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/f039123fc078beb9b4bafd5ec3ca8136.jpg?v=1786669671"},{"product_id":"power-head-cover-complete-for-x5-dark-blue","title":"SEBO Complete Power Head Cover in Dark Blue for AUTOMATIC X5","description":"\u003cp\u003eDark blue examples of the AUTOMATIC X5 take 5796AM when the top of the cleaning head has been damaged. The number covers a complete power head cover: the moulded shell that closes over the brush chamber, holds the two sides of the nozzle in line with each other and gives the front trim something to clip into.\u003c\/p\u003e\u003cp\u003eDamage here is impact rather than age. A cleaning head works at ankle height, where thresholds, stair nosings and furniture feet all reach it, and the shell is what arrives first. Once a fixing point has sheared or the plastic has opened along a crack, the head chatters across hard flooring, the trim stands proud at one edge and dust begins to collect in the split. Rigidity goes at the same time, and the bearing blocks and roller notice that long before the owner does. Fitting a new assembly restores the structure and the finish together.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e dark blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5796AM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e one complete cover assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching dark blue mouldings:\u003c\/strong\u003e brush cover release 5714DB, brush cover 5249DB1, brush roller release 5713DB, right-hand bearing block 5031DB1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFurther up the machine:\u003c\/strong\u003e front cover 5749SE, dust bag housing 5755DB, cable hook kit 5768DB, and handle with cord, tube and switch 5647AM in gray black and yellow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIdentification is the part most people get wrong when they search for a SEBO power head cover. Shells from neighbouring models look similar and do not interchange, so start from the model badge and then match the colour. Take the plug out of the socket and let the roller come to a stop before opening anything up. Genuine SEBO component, dispatched in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214504026362,"sku":"5796AM","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/b1fb41cbd0918aaf8213ce755924bff1.jpg?v=1786669674"},{"product_id":"brush-cover-for-x2-and-x5-dark-blue","title":"SEBO Brush Cover for AUTOMATIC X2 and X5 — Dark Blue","description":"\u003cp\u003eThe dark blue cover at the brush roller end of the power head is doing more than finishing the styling: it closes off that end of the housing, keeps the roller assembly captive and stops debris working its way into the bearing area from the side. Part 5249DB1 is the SEBO replacement for the AUTOMATIC X2 and AUTOMATIC X5.\u003c\/p\u003e\u003cp\u003eSEBO shows the cover at position 161 of the AUTOMATIC X4 \/ X5 exploded diagram, catalogued there in dark blue and gray black finishes; this listing supplies the dark blue version. Directly above it on the same sheet, at position 160, sits the seal bearing 5244HG — worth ordering together, because a cover that has been broken off in a collision usually means the end of the roller has taken a knock as well, and a fresh seal keeps grit out of a bearing that has just been disturbed.\u003c\/p\u003e\u003cp\u003eCovers break in a moment rather than wearing out: a hard contact with a stair nosing, a doorway, or a metal threshold strip. On the AUTOMATIC X2, the catch that holds the cover closed is a separate part, 5239GS, so check whether it is the cover, the catch, or both that need renewing. Owners with a white machine want the white version instead, listed as 5249WE.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number 5249DB1 — brush cover\u003c\/li\u003e\n\u003cli\u003eColour and finish: dark blue\u003c\/li\u003e\n\u003cli\u003eFits the SEBO AUTOMATIC X2 and AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003eDiagram position 161, AUTOMATIC X4 \/ X5 breakdown (dark blue \/ gray black entry)\u003c\/li\u003e\n\u003cli\u003eJob: encloses the brush roller end of the power head\u003c\/li\u003e\n\u003cli\u003eRelated numbers: seal bearing 5244HG (position 160), white cover 5249WE, X2 cover release 5239GS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eColour and number both matter at the counter, because SEBO catalogues this cover in more than one finish and a dark blue machine wearing a white end cap is the one repair every visitor spots. Searches for an AUTOMATIC X5 brush cover, an X2 roller end cap or a dark blue SEBO power head cover all resolve to this number.\u003c\/p\u003e\u003cp\u003eGenuine SEBO brush cover from an authorized dealer, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214517494010,"sku":"5249DB1","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5249DB1_08ed8cf2-d637-4713-940d-8b6fea8a9c04.jpg?v=1785143942"},{"product_id":"brush-cover-for-x2-and-x5-white","title":"SEBO Brush Cover for AUTOMATIC X2 and X5 — White","description":"\u003cp\u003eColour is the whole decision on this part. An AUTOMATIC X2 or X5 finished in white takes the white brush cover, and part 5249WE is it — the same component as the dark blue cover, moulded in the shade that keeps a repaired machine looking untouched.\u003c\/p\u003e\u003cp\u003eThe cover caps the brush roller end of the power head. It holds the roller assembly enclosed, seals that end of the housing against knocks, and keeps stray fibre and grit from getting in from the side rather than through the nozzle. Damage is almost always sudden and physical: a stair nosing caught at speed, a doorway, a threshold strip. Because a broken cover keeps working in the sense that the machine still runs, it is easy to leave in place for months, by which time the roller end has been collecting everything the cover was meant to exclude.\u003c\/p\u003e\u003cp\u003eFitment is the SEBO AUTOMATIC X2 and AUTOMATIC X5, and it drops straight in where the factory cover came out. Two related numbers are worth knowing: the dark blue equivalent is 5249DB1, and on the AUTOMATIC X2 the catch that latches the cover shut is 5239GS, which is a separate order if that is the piece that has failed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number 5249WE — brush cover, white\u003c\/li\u003e\n\u003cli\u003eColour and finish: white\u003c\/li\u003e\n\u003cli\u003eFits the SEBO AUTOMATIC X2 and AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003eJob: encloses the brush roller end of the power head\u003c\/li\u003e\n\u003cli\u003eFitting: direct replacement for the original cover, no modification\u003c\/li\u003e\n\u003cli\u003eRelated numbers: dark blue cover 5249DB1, X2 cover release 5239GS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitting is quick and there is nothing to adjust afterwards, since the cover locates on the original mountings and the roller stays where it was. Take the moment while everything is open to pull wound hair and thread off the roller ends — that is precisely the debris that works its way in once a cover has been broken for a while.\u003c\/p\u003e\u003cp\u003eGenuine SEBO white brush cover, authorized dealer stock, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214517559546,"sku":"5249WE","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5249WE_5ab21b8a-49fd-4268-989f-454fedbbd34d.jpg?v=1785138516"},{"product_id":"seal-bearing-for-x2-and-x5","title":"SEBO Seal Bearing for AUTOMATIC X2 and X5","description":"\u003cp\u003eCarpet fibre, grit and fine dust are exactly what a brush roller bearing cannot tolerate, and the seal at the end of the roller is the barrier that keeps them on the outside. Part 5244HG is the SEBO seal bearing that does that job on the AUTOMATIC X2 and the AUTOMATIC X5.\u003c\/p\u003e\u003cp\u003eOnce a seal hardens, distorts or splits, the ingress starts immediately and the noise follows within a season: a dry rumble that rises with speed, then a howl, then a roller that drags and cooks belts. Because the symptom arrives gradually, most owners tune it out until something louder happens. SEBO places this part at position 160 of the AUTOMATIC X4 \/ X5 exploded diagram, listed simply as the seal bearing, immediately below the brush cover at position 161 — the part supplied for these machines as 5249DB1 in dark blue. That is the practical hint: the seal is buried under components you have to remove for a belt change or a bearing job anyway, so renewing it during any brush roll service saves stripping the head twice.\u003c\/p\u003e\u003cp\u003eFitment is the SEBO AUTOMATIC X2 and AUTOMATIC X5. If the bearing itself is already noisy, expect to change bearing and seal together — a fresh seal will not quieten a bearing that has been running contaminated.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number 5244HG — seal bearing\u003c\/li\u003e\n\u003cli\u003eFits the SEBO AUTOMATIC X2 and AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003eDiagram position 160, AUTOMATIC X4 \/ X5 breakdown\u003c\/li\u003e\n\u003cli\u003eJob: keeps dust, grit and carpet fibre out of the brush roller bearing seat\u003c\/li\u003e\n\u003cli\u003eReplace whenever the roller is out for a belt, bearing or noise complaint\u003c\/li\u003e\n\u003cli\u003eSits alongside brush cover 5249DB1 at position 161 of the same sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShoppers reach this listing looking for a SEBO brush roll bearing seal, an AUTOMATIC X5 roller seal, or the small seal that sits behind the brush cover on an X2 power head. Genuine SEBO seal bearing for X2 and X5 brush roll repairs, from an authorized dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214531092730,"sku":"5244HG","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5244HG.jpg?v=1785157879"},{"product_id":"shaft-extension-for-x2-x5-and-x8","title":"SEBO Shaft Extension for AUTOMATIC X2, X5 and X8","description":"\u003cp\u003eBetween the motor and the brush roller of a SEBO upright there is a short extension shaft, and everything the drive does has to pass through it. Part 5246 is the replacement for that component on the AUTOMATIC X2, AUTOMATIC X5 and AUTOMATIC X8.\u003c\/p\u003e\u003cp\u003eWear at the shaft rarely announces itself as a failure. It shows up first as noise — a rattle that arrives under load on deep pile and disappears on hard floor — and then as behaviour: a belt that creeps toward one shoulder of the pulley and wears bright on one edge, a roller that will not hold speed against a heavy carpet, and eventually drive that slips away entirely. Because a slipping belt produces the same complaint, the shaft is often overlooked and the belt gets changed twice before anyone checks the extension it runs against.\u003c\/p\u003e\u003cp\u003eRenewing a worn shaft takes the slack out of the drive line so the roller turns true and the belt tracks where the design intended. It is a sensible inspection point during any power head service, alongside the belt and the roller bearings. On the AUTOMATIC X2 and AUTOMATIC X5, the bearing seal at the end of the roller is 5244HG, and it is common practice to renew that seal while the head is already open.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number 5246 — drive shaft extension\u003c\/li\u003e\n\u003cli\u003eFits the SEBO AUTOMATIC X2, AUTOMATIC X5 and AUTOMATIC X8\u003c\/li\u003e\n\u003cli\u003eJob: transmits drive from the motor pulley through to the brush roller\u003c\/li\u003e\n\u003cli\u003eReplace when the power head rattles under load, drops drive, or eats belts on one edge\u003c\/li\u003e\n\u003cli\u003eInspect with the belt and roller bearings during a power head strip\u003c\/li\u003e\n\u003cli\u003eRelated number: seal bearing 5244HG for AUTOMATIC X2 and X5 brush rolls\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eListed for anyone searching a SEBO drive shaft extension, an AUTOMATIC X8 power head shaft, or an X5 brush roller drive repair. Genuine SEBO part supplied by an authorized dealer, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214549541114,"sku":"5246","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/9b6d6a3dfa09d68972a05feed5fde2a1.jpg?v=1786668750"},{"product_id":"front-cover-seal-for-x4-and-x5-also-available-with-front-cover-complete-item-s-5749-or-5750","title":"SEBO Front Cover Seal for AUTOMATIC X4 and X5","description":"\u003cp\u003eSuction that never reaches the nozzle is usually escaping somewhere it should not, and the joint at the front cover is a common place for it to go. Order code 5454 is the seal closing that joint on the AUTOMATIC X4, the X4 Boost and the AUTOMATIC X5, drawn as item 11 on the AUTOMATIC X4\/X5 sheet.\u003c\/p\u003e\u003cp\u003eRubber held under constant compression takes a permanent set. After enough years the seal no longer stands proud enough to be squeezed when the cover shuts, or it has hardened until it splits along the compressed face. The cover, released by the catch at item 19 and carrying the moulding at item 17, then closes onto a broken sealing face instead of a continuous one. What you notice is a thin whistle at the seam while the machine runs, dust escaping at the cover edge, and airflow that has quietly fallen away with no blocked bag or filter to explain it.\u003c\/p\u003e\u003cp\u003eIt is one of the few genuinely simple restorations on these machines. The tired seal lifts out of its channel, the channel is wiped clean, and the new one presses in. Where the cover itself has cracked as well, the seal also forms part of the complete front cover assemblies, items 5749 and 5750.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder code:\u003c\/strong\u003e 5454\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachines covered:\u003c\/strong\u003e AUTOMATIC X4, AUTOMATIC X4 Boost, AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e closes the cover joint so air stays in the filtration path\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawn at:\u003c\/strong\u003e item 11 on the AUTOMATIC X4\/X5 sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso inside:\u003c\/strong\u003e complete front cover 5749 and 5750\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAround it there:\u003c\/strong\u003e cable clamp 5162, cover release 5706GS, cover 5707SW\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSeals are better changed on schedule than on symptom, because what they give away builds so gradually that nobody can name the day it started.\u003c\/p\u003e\u003cp\u003eGenuine SEBO front cover seal, dispatched in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214549999866,"sku":"5454","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/10d2b6e032c44a4c0076ddedbbe770f4.jpg?v=1786668302"},{"product_id":"sensor-with-pulley-and-screws-for-x5-g2-and-g5-has-red-ring","title":"SEBO Sensor with Pulley and Screws for AUTOMATIC X5 and ESSENTIAL G2, G5 — Red Ring","description":"\u003cp\u003eColour is the whole distinction here. SEBO builds two versions of this sensor and marks each with a coloured ring at the collar; the red-ringed one carries order code 5465 and serves the AUTOMATIC X5 together with the ESSENTIAL G2 and G5. The pulley and mounting screws travel with it.\u003c\/p\u003e\u003cp\u003eCarrying a pulley means the unit is turned by the machine's belt run, so it sees the drive directly. That is why trouble here reads as strange behaviour rather than as a noise: response to the controls becomes inconsistent, running speed drifts instead of holding steady, or the machine stops halfway across a room and then restarts as though nothing had happened. Those complaints are routinely blamed on the motor, and the motor is routinely innocent.\u003c\/p\u003e\u003cp\u003eWork through it in order. Check the belt for cracked teeth or slack first, since a belt that skips imitates a failing sensor closely. Then confirm the ring colour on the unit coming out, because red and yellow are not interchangeable and the yellow-ringed part carries its own number, 5464. Photograph each connector and the path every lead follows before anything is unplugged; rebuilding to the factory routing is most of the labour.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder code:\u003c\/strong\u003e 5465\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarked by:\u003c\/strong\u003e a red ring at the collar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e sensor, pulley, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachines covered:\u003c\/strong\u003e AUTOMATIC X5, ESSENTIAL G2, ESSENTIAL G5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYellow-ringed alternative:\u003c\/strong\u003e 5464\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSearches reaching this listing include SEBO X5 sensor, ESSENTIAL G5 sensor with pulley and red ring sensor replacement. Each describes the same assembly, supplied ready to mount with its pulley already in place, which is what keeps the swap to an hour rather than an afternoon.\u003c\/p\u003e\u003cp\u003eGenuine SEBO replacement sensor, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214554390778,"sku":"5465","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5465.jpg?v=1785154149"},{"product_id":"wheel-complete-for-x1-x2-and-x4-x5-gray-black","title":"SEBO Gray Black Wheel for AUTOMATIC X1, X2, X4, X4 Boost and X5","description":"\u003cp\u003eWheel 5819GS arrives complete in gray black — hub and tread moulded as one piece, with no bearing to press home and nothing to build up beforehand. SEBO marks it as item 119 on the AUTOMATIC X4 X5 parts diagram, and it is one of the few components carried straight across the upright family: the AUTOMATIC X1, X2, X4, X4 Boost and X5 all take it.\u003c\/p\u003e\u003cp\u003eReading the diagram around item 119 shows how the back of the chassis is put together, and decodes what the bigger assemblies contain. Item 118 is the axle, item 120 the return spring, item 121 the clamp. Item 116 is axle assembly 5051GS, and the note against it covers items 117 through 120 — meaning that assembly turns up with the wheels already on it, along with the orange foot pedal 5059OR from item 117 and the spring. Reach for that number when the axle itself has been bent and only the clamps get reused. Where the axle runs true and the fault is confined to the rolling surface, one wheel is the whole repair.\u003c\/p\u003e\u003cp\u003eSymptoms are easy to read from the handle. A tread that has flat-spotted, embedded grit or lost part of its rim skids rather than rotates, felt as extra effort on the forward stroke and heard as a tick once per turn. On hard flooring a broken rim can leave a trace behind the machine. On a high-mileage upright it makes sense to fit both sides at once, because a fresh wheel running against a worn one leaves the chassis marginally out of level and puts the difference through the newer part.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits\u003c\/strong\u003e — AUTOMATIC X1, AUTOMATIC X2, AUTOMATIC X4, AUTOMATIC X4 Boost, AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour\u003c\/strong\u003e — gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied\u003c\/strong\u003e — complete, one wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram\u003c\/strong\u003e — item 119\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber\u003c\/strong\u003e — 5819GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAround it\u003c\/strong\u003e — 5051GS axle assembly, 5059OR pedal, 5053 axle, 2010 spring, 2014 clamp singly or 2014ER in tens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight gray version\u003c\/strong\u003e — 5819HG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO wheel from an authorized dealer, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214560157946,"sku":"5819GS","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5819GS.jpg?v=1785139242"},{"product_id":"service-box-x4-x5-x1-x2-1-piece-8-bags-microfilter-exhaust-filter-and-sealing-strip","title":"Genuine SEBO 5828AM X1, X2, X4 \u0026 X5 Service Box – 8 Bags \u0026 Filters","description":"\u003cp\u003eReplace the bags and service filters in your SEBO X1, X2, X4 or X5 with one matched kit. This genuine service box combines everyday bag refills with the microfilter, exhaust filter and sealing strip specified for these models.\u003c\/p\u003e\u003ch2\u003eWhat you receive\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e8 genuine SEBO filter bags with sealing caps\u003c\/li\u003e\n\u003cli\u003e1 microfilter\u003c\/li\u003e\n\u003cli\u003e1 exhaust filter\u003c\/li\u003e\n\u003cli\u003e1 sealing strip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatible SEBO models\u003c\/h2\u003e\u003cp\u003eAUTOMATIC X1, X2, X4, X4 Boost and X5.\u003c\/p\u003e\u003cp\u003eThe included filters fit the listed X1\/X2\/X4\/X5 models. For X7 or X8, choose service box 51828AM instead.\u003c\/p\u003e\u003ch2\u003ePart numbers and package labels\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e5828AM\u003c\/strong\u003e is the U.S. catalog reference for this service box. \u003cstrong\u003e5828ER\u003c\/strong\u003e is an alternate genuine SEBO reference for the same listed model fitment and kit contents. If your existing package says 5828AM or 5828ER, use the compatible-model list and the contents above to confirm your replacement. The different letter suffix alone does not mean it is the wrong kit.\u003c\/p\u003e\u003cp\u003eThis cross-reference applies specifically to 5828AM\/5828ER; it is not a rule that all SEBO numbers or carton codes are interchangeable.\u003c\/p\u003e\u003ch2\u003eWhen and how to replace bags and filters\u003c\/h2\u003e\u003cp\u003eFollow the bag-change indicator and instructions in your vacuum's manual. Fine dust can restrict airflow before a bag looks full. Switch off and unplug the vacuum, remove the used bag, close its sealing cap, and seat the new collar fully in the holder. Check that the bag is correctly positioned before closing the cover.\u003c\/p\u003e\u003cp\u003eReplace the filters according to your model's maintenance instructions. Do not wash disposable bags or filters. How long a box lasts depends on the debris collected and how often you clean.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering reference:\u003c\/strong\u003e 5828AM. Check the model name on your vacuum's rating label against the list above. If you need help, \u003ca href=\"\/pages\/contact\"\u003econtact Vacuums and More\u003c\/a\u003e with the model number before ordering.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214563500282,"sku":"5828AM","price":77.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/genuine-sebo-5828am-bags-service-box_269bd11b-70ff-484a-92c4-db436b7794d1.jpg?v=1789085426"},{"product_id":"hepa-service-box-x4-x5-x1-x2-1-piece-8-bags-hepa-microfilter-and-exhaust-filter","title":"Genuine SEBO 5827AM X1, X2, X4 \u0026 X5 HEPA Service Box – 8 Bags \u0026 Filters","description":"\u003cp\u003eService your SEBO X1, X2, X4 or X5 with genuine bags and the matching HEPA microfilter. The box also includes the exhaust filter, putting the correct replacement supplies together for the listed machines.\u003c\/p\u003e\u003ch2\u003eWhat you receive\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e8 genuine SEBO filter bags with sealing caps\u003c\/li\u003e\n\u003cli\u003e1 HEPA microfilter\u003c\/li\u003e\n\u003cli\u003e1 exhaust filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatible SEBO models\u003c\/h2\u003e\u003cp\u003eAUTOMATIC X1, X2, X4, X4 Boost and X5.\u003c\/p\u003e\u003cp\u003eThis kit's filters fit X1\/X2\/X4\/X5 models. For X7 or X8, choose HEPA service box 51829AM. The HEPA specification describes the included microfilter, not a separate certification of the complete vacuum.\u003c\/p\u003e\u003ch2\u003ePart numbers and package labels\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e5827AM\u003c\/strong\u003e is the U.S. catalog reference for this service box. \u003cstrong\u003e5827ER\u003c\/strong\u003e is an alternate genuine SEBO reference for the same listed model fitment and kit contents. If your existing package says 5827AM or 5827ER, use the compatible-model list and the contents above to confirm your replacement. The different letter suffix alone does not mean it is the wrong kit.\u003c\/p\u003e\u003cp\u003eThis cross-reference applies specifically to 5827AM\/5827ER; it is not a rule that all SEBO numbers or carton codes are interchangeable.\u003c\/p\u003e\u003ch2\u003eWhen and how to replace bags and filters\u003c\/h2\u003e\u003cp\u003eFollow the bag-change indicator and instructions in your vacuum's manual. Fine dust can restrict airflow before a bag looks full. Switch off and unplug the vacuum, remove the used bag, close its sealing cap, and seat the new collar fully in the holder. Check that the bag is correctly positioned before closing the cover.\u003c\/p\u003e\u003cp\u003eReplace the filters according to your model's maintenance instructions. Do not wash disposable bags or filters. How long a box lasts depends on the debris collected and how often you clean.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering reference:\u003c\/strong\u003e 5827AM. Check the model name on your vacuum's rating label against the list above. If you need help, \u003ca href=\"\/pages\/contact\"\u003econtact Vacuums and More\u003c\/a\u003e with the model number before ordering.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214564221178,"sku":"5827AM","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/genuine-sebo-5827er-bags-service-box_e44f82b7-94b4-4c78-b5af-a4f9ccfd65b9.jpg?v=1789085477"},{"product_id":"edge-brush-roller-for-x2-x5-and-x8","title":"SEBO Edge Brush Roller for AUTOMATIC X2, X5 and X8","description":"\u003cp\u003eCleaning right out to the edge of the path is what this roller is for. SEBO lists it as 5250, the edge brush roller for the AUTOMATIC X2, AUTOMATIC X5 and AUTOMATIC X8, and it is supplied on its own rather than as half of a pair.\u003c\/p\u003e\u003cp\u003eThose machines carry two rollers side by side in the housing, which is why a single number is useful: when only one has worn out there is no reason to buy both. The symptom owners notice first is a narrow band of carpet left untouched along baseboards, under cabinet kicks and around furniture legs, which is what happens once the bristles at that end stop reaching the floor. The edge roller is the one that reaches that far out, so it takes the punishment of every pass along a wall while the inner roller works easier ground, and it is common for it to be the first of the pair to go.\u003c\/p\u003e\u003cp\u003eCheck two things while the roller is out. Wound hair at the ends binds a roller and loads everything downstream of it, and the belt that turns the rollers on those machines, 5110, is worth a look at the same time — a belt that has stretched or glazed will let a perfectly good roller slip under load. If both rollers have lost bristle height, the matched set for the same machines is 5290AM. A soft-filament edge roller is stocked as 5250GE.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e AUTOMATIC X2, AUTOMATIC X5 and AUTOMATIC X8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSEBO part number:\u003c\/strong\u003e 5250\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e one edge brush roller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBristle grade:\u003c\/strong\u003e standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e a strip of carpet is left uncleaned along edges and skirtings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull matched set:\u003c\/strong\u003e 5290AM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft-bristle version:\u003c\/strong\u003e 5250GE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated number:\u003c\/strong\u003e drive belt 5110 for the AUTOMATIC X2, X5 and X8\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO roller, ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214568284410,"sku":"5250","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5250_0a245062-46dd-4123-82cd-e363d7b4861a.jpg?v=1785140740"},{"product_id":"edge-brush-roller-soft-bristle-for-x2-x5-and-x8","title":"SEBO Soft-Bristle Edge Brush Roller for AUTOMATIC X2 and X5","description":"\u003cp\u003eWhere fine rugs and polished hard floors are part of the round, the soft-filament edge roller is the safer choice. SEBO stocks it as 5250GE and lists it for the AUTOMATIC X2 and AUTOMATIC X5.\u003c\/p\u003e\u003cp\u003eBristle grade aside it is the same edge roller as the standard 5250, going into the same place in the brush housing and driven the same way. The soft rows are less inclined to fuzz delicate yarn or leave brush marks on a finished floor, while still reaching into the outer edge of the cleaning path — the part of the floor a worn edge roller quietly stops touching. Skirting boards, the line where carpet meets a door threshold and the strip beside a kitchen kick are the places that give it away.\u003c\/p\u003e\u003cp\u003eWork through the head properly while it is apart. Cut away hair wound at the roller ends before it reaches the bearings, and check the drive belt 5110 fitted to those machines for stretch or glazing, since a slipping belt imitates a worn roller closely enough to waste a part. If both rollers in the head have lost bristle height, the soft-filament set 5290GE renews them together, and the firmer edge roller is 5250.\u003c\/p\u003e\u003cp\u003eGrade is a floor decision rather than a machine decision, so a household can move between the two as its flooring changes without touching anything else in the head. Anyone hunting for a soft-bristle SEBO edge roller, an AUTOMATIC X5 edge brush replacement, or simply for 5250GE, is looking at this part.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e AUTOMATIC X2 and AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSEBO part number:\u003c\/strong\u003e 5250GE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e one soft-bristle edge brush roller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest suited to:\u003c\/strong\u003e wool, fine rugs and polished bare floors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard-bristle version:\u003c\/strong\u003e 5250\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft-bristle set:\u003c\/strong\u003e 5290GE, for the AUTOMATIC X2 and X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated number:\u003c\/strong\u003e drive belt 5110\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO roller, ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214568317178,"sku":"5250GE","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/41fe14fdccb29ef73b0227ef77c16627.jpg?v=1786667916"},{"product_id":"brush-roller-set-for-x2-x5-and-x8","title":"SEBO 15 in. Brush Roller Set for AUTOMATIC X2, X5 and X8 — 2 Piece","description":"\u003cp\u003eWhen both rollers in an X-series head have gone smooth, changing them as a matched pair is the tidy repair. Part number 5290AM is the 15 in. two-piece brush roller set for the SEBO AUTOMATIC X2, AUTOMATIC X5 and AUTOMATIC X8.\u003c\/p\u003e\u003cp\u003eRollers wear together because they take the same passes over the same floors, so renewing one and leaving its neighbour usually just pushes the job a few months down the road and leaves the head agitating unevenly across its width in the meantime. This set covers both positions in the housing. Where only the outer roller is tired, the edge roller on its own is 5250. Judge them at inspection by bristle height: once the rows sit level with the roller body the agitation has effectively stopped and the carpet is being cleaned by airflow alone, which is a slow way to notice that a vacuum has stopped earning its keep.\u003c\/p\u003e\u003cp\u003eFit the set with the drive in mind. The belt that turns the rollers on the AUTOMATIC X2, X5 and X8 is 5110, and a belt that has stretched or glazed will let a brand-new pair of rollers slip under load and imitate the very wear they were bought to cure. Clear any hair wrapped at the ends of the old rollers before the new pair goes in, so nothing is dragged into fresh bearings. The soft-filament version of this set is 5290GE.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e AUTOMATIC X2, AUTOMATIC X5 and AUTOMATIC X8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSEBO part number:\u003c\/strong\u003e 5290AM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e a two-piece brush roller set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 15 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBristle grade:\u003c\/strong\u003e standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle edge roller:\u003c\/strong\u003e 5250\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft-bristle set:\u003c\/strong\u003e 5290GE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated number:\u003c\/strong\u003e drive belt 5110 for the AUTOMATIC X2, X5 and X8\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO rollers, ship in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214568382714,"sku":"5290AM","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5290AM_be2c4425-cd5f-40d8-88a2-955595920e0d.jpg?v=1785141087"},{"product_id":"brush-roller-set-soft-bristle-for-x2-x5-and-x8","title":"SEBO Soft-Bristle Brush Roller Set for AUTOMATIC X2, X5 and X8","description":"\u003cp\u003eTwo soft-filament rollers supplied together: 5290GE renews the complete brush set in a SEBO AUTOMATIC X2, AUTOMATIC X5 or AUTOMATIC X8 head in a single order.\u003c\/p\u003e\u003cp\u003eIt is the gentle-bristle counterpart to the standard 5290AM set, and the reason to choose it is the flooring rather than the machine. Wool, loop pile, fine rugs and polished hard floors all take a softer brush better over the long run, where a firm filament can fuzz delicate yarn season after season. The agitation is still there — soft rows knock dust out of the pile perfectly well — it simply arrives with less scrubbing at the surface of the weave.\u003c\/p\u003e\u003cp\u003eChanging both rollers at once keeps the agitation even across the width of the head, which a mismatched pair of one new and one worn roller cannot manage. While the head is open, clear the hair wound at the roller ends and look over the drive: 5110 is the belt fitted to the AUTOMATIC X2, X5 and X8, and a glazed or stretched belt will let new rollers slip just as the old ones did. Where only the outer roller has worn, the soft edge roller on its own is 5250GE.\u003c\/p\u003e\u003cp\u003eBristle height is the measure to judge by. Once the rows sit flush with the roller body they are riding on the carpet rather than reaching into it, and the machine will sound exactly as it always has while lifting steadily less. Cut away hair wound at the roller ends before fitting, since the tightest wraps sit where the roller meets its bearing and will chew a new set as readily as they chewed the old one.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e AUTOMATIC X2, AUTOMATIC X5 and AUTOMATIC X8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSEBO part number:\u003c\/strong\u003e 5290GE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e a complete soft-bristle brush roller set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose it for:\u003c\/strong\u003e wool, loop pile and delicate hard floors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard-bristle set:\u003c\/strong\u003e 5290AM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle soft edge roller:\u003c\/strong\u003e 5250GE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated number:\u003c\/strong\u003e drive belt 5110\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO rollers, ship in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214568546554,"sku":"5290GE","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5290GE_0fe986aa-757b-4804-b0d0-75cb265bd001.jpg?v=1785151638"},{"product_id":"sealing-strip-for-x2-x5-and-x8","title":"SEBO 15 in. Sealing Strip for AUTOMATIC X2, X5 and X8","description":"\u003cp\u003eWide bases need the longer seal. 5400-2 is the 15 in. sealing strip, listed at position 150 on the parts sheet SEBO titles AUTOMATIC X7\/X8.\u003c\/p\u003e\u003cp\u003eThat sheet covers two different base plate builds, and telling them apart is where an order goes astray. The rear bottom plate 52120GS at position 149 is listed as including positions 150 and 165, so it ships with this strip and with screw 0197ER, an M4 x 12, already fitted. The other rear plate on the same sheet, 52110GS at position 144, is listed with positions 145 and 160 instead — a different fastener, 01029ER — and does not carry position 150 at all. Matching on a balloon number alone is how a 15 in. strip ends up ordered for a base that never took one. Match on the code 5400-2.\u003c\/p\u003e\u003cp\u003eIn service the strip runs along the underside of the base and stops air slipping in around the edges instead of being drawn up through the carpet. A hardened or torn strip presents as weak pickup while the motor, the bag and the filters all check out fine, and it is exactly the sort of cheap part a service skips because nothing about it looks broken. Nearby on the same drawing sit the rubbing plate 5155GS at position 139 and the pile adjustment wheel 5174GS at 141, both worth a glance while the machine is upside down. Narrower bases use the 12 in. strip, 5400-1.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSEBO part number:\u003c\/strong\u003e 5400-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 15 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawn at:\u003c\/strong\u003e position 150 on the AUTOMATIC X7\/X8 parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts to:\u003c\/strong\u003e the position 149 rear plate assembly, 52120GS, retained by screw 0197ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e AUTOMATIC X2, AUTOMATIC X5 and AUTOMATIC X8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e one strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the lip is stiff, split or worn back from its original depth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNarrower equivalent:\u003c\/strong\u003e 5400-1, the 12 in. strip\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCommon search phrasings for this one include SEBO X5 sealing strip, AUTOMATIC X8 base plate seal and genuine SEBO 5400-2 nozzle seal.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214569038074,"sku":"5400-2","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5400-2_3881ebb9-fac5-4f71-8eca-1d41df6ace17.jpg?v=1785145873"},{"product_id":"sebo-x1-x2-x4-x5-hepa-service-box-8-bags-hepa-exhaust-filters","title":"Genuine SEBO 5827AM X1, X2, X4 \u0026 X5 HEPA Service Box – 8 Bags \u0026 Filters","description":"\u003cp\u003eService your SEBO X1, X2, X4 or X5 with genuine bags and the matching HEPA microfilter. The box also includes the exhaust filter, putting the correct replacement supplies together for the listed machines.\u003c\/p\u003e\u003ch2\u003eWhat you receive\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e8 genuine SEBO filter bags with sealing caps\u003c\/li\u003e\n\u003cli\u003e1 HEPA microfilter\u003c\/li\u003e\n\u003cli\u003e1 exhaust filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatible SEBO models\u003c\/h2\u003e\u003cp\u003eAUTOMATIC X1, X2, X4, X4 Boost and X5.\u003c\/p\u003e\u003cp\u003eThis kit's filters fit X1\/X2\/X4\/X5 models. For X7 or X8, choose HEPA service box 51829AM. The HEPA specification describes the included microfilter, not a separate certification of the complete vacuum.\u003c\/p\u003e\u003ch2\u003ePart numbers and package labels\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e5827AM\u003c\/strong\u003e is the U.S. catalog reference for this service box. \u003cstrong\u003e5827ER\u003c\/strong\u003e is an alternate genuine SEBO reference for the same listed model fitment and kit contents. If your existing package says 5827AM or 5827ER, use the compatible-model list and the contents above to confirm your replacement. The different letter suffix alone does not mean it is the wrong kit.\u003c\/p\u003e\u003cp\u003eThis cross-reference applies specifically to 5827AM\/5827ER; it is not a rule that all SEBO numbers or carton codes are interchangeable.\u003c\/p\u003e\u003ch2\u003eWhen and how to replace bags and filters\u003c\/h2\u003e\u003cp\u003eFollow the bag-change indicator and instructions in your vacuum's manual. Fine dust can restrict airflow before a bag looks full. Switch off and unplug the vacuum, remove the used bag, close its sealing cap, and seat the new collar fully in the holder. Check that the bag is correctly positioned before closing the cover.\u003c\/p\u003e\u003cp\u003eReplace the filters according to your model's maintenance instructions. Do not wash disposable bags or filters. How long a box lasts depends on the debris collected and how often you clean.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer reference:\u003c\/strong\u003e 5827AM. \u003cstrong\u003eAlternate reference \/ stock code:\u003c\/strong\u003e 5827ER. Check the model name on your vacuum's rating label against the list above. If you need help, \u003ca href=\"\/pages\/contact\"\u003econtact Vacuums and More\u003c\/a\u003e with the model number before ordering.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":49014433710330,"sku":"5827ER","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/genuine-sebo-5827er-bags-service-box_6ec4316d-1c5e-4946-8d6b-f64d5033639f.jpg?v=1789085528"},{"product_id":"sebo-handle-catch-for-x4-x5-370-grey-black-replacement","title":"SEBO Handle Catch for X4, X5 and the 370 — Dark Grey","description":"\u003cp\u003eStep on the pedal and the handle drops; stand the machine back up and it clicks home. The handle catch is what makes both of those things happen, and part 1859DG is the dark grey one for the SEBO X4 and X5 uprights and for the 370.\u003c\/p\u003e\u003cp\u003eIt is a wear item by design. Every park and every recline loads the same small latch, and on a machine used daily that is thousands of cycles a year against a moulding the size of a thumb. Colour is worth checking before you order, because SEBO has run this catch in more than one finish and the dark grey is what matches a dark grey handle assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: the SEBO X4, X5 and 370 uprights\u003c\/li\u003e\n\u003cli\u003eColour: dark grey\u003c\/li\u003e\n\u003cli\u003eJob: holds the handle upright when parked and releases it at the pedal\u003c\/li\u003e\n\u003cli\u003eOther finishes: listed separately as 1859GS, 1859SB and 1859SG, each with its own fitment\u003c\/li\u003e\n\u003cli\u003eInstallation: seats in the existing housing with no modification\u003c\/li\u003e\n\u003cli\u003eOrder as: SEBO part 1859DG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA tired catch announces itself clearly enough. The handle sags forward on its own while you are trying to work, or it refuses to click into place when the machine is stood up, or it needs a definite shove before it will let go. Some people get used to a machine that has to be nudged; the fix is one small moulding rather than a whole new upright.\u003c\/p\u003e\u003cp\u003eFitting one is straightforward with the machine unplugged and laid on its back, but photograph the spring and the catch in place before anything comes out, because the spring only works one way round. Look over the pedal linkage while you are in there: a catch that has been fighting a bent or stiff pedal will wear out again quickly.\u003c\/p\u003e\u003cp\u003eThis is the listing for anyone searching a SEBO X5 handle catch, an X4 handle latch replacement or genuine SEBO 1859DG. Check the finish against the handle you have before ordering, and inspect the pivot pin while the catch is out.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":49015239082234,"sku":"1859DG","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1859DG.jpg?v=1785163391"},{"product_id":"sebo-x2-x5-upright-brush-cover-grey-white-roller-cover","title":"SEBO Brush Roller Cover for X2 and X5 Uprights - Grey and White","description":"\u003cp\u003eCracked or missing, the panel over the brush roller stops doing three jobs at once: enclosing the spinning brushstrip, steering debris toward the nozzle throat, and shielding the belt from anything on the carpet that could snag it. Part 5249GW is the grey and white cover that replaces that panel on SEBO X2 and X5 uprights.\u003c\/p\u003e\u003cp\u003eBecause the cover forms part of the air path rather than merely sitting over it, damage there is not only cosmetic. A break in it opens the enclosure, and the lost seal around the roller shows up as a rattle underfoot and pickup that has quietly gone off with no obvious cause. The belt is the other casualty. With the enclosure open on one side, threads and hair that would have been kept clear find their way onto the belt and start wrapping, and a belt carrying a wrap of thread runs hot, tracks badly and eventually takes the bearing blocks with it.\u003c\/p\u003e\u003cp\u003eThis replacement is moulded on the original tooling, so the mounting points line up and the underside of the machine closes back to a flush, finished surface. That flatness matters for more than appearance: an underside that sits proud anywhere changes how the nozzle meets the floor and how well it seals against carpet.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO X2 and X5 uprights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e grey and white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e encloses the brush roller and directs debris toward the nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the panel is cracked or broken, or the underside rattles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5249GW\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA good moment to check the brushstrip for worn bristles while the cover is off, since strips that have gone flat lift very little from carpet no matter how well the rest of the head is sealed. Continuing underneath on the same machines, the dark grey front bottom plate is SEBO 5413DG and the complete rear bottom plate assembly is SEBO 5414DG. Genuine SEBO X2 brush cover, X5 roller cover, part 5249GW.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":49015239704826,"sku":"5249GW","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5249gw-00_272730e1-76de-4b2a-abbb-60ad172b3beb.jpg?v=1785039358"},{"product_id":"sebo-x2-x5-upt-front-bottom-plate-dark-grey-nozzle-sole-plate","title":"SEBO Front Bottom Plate for X2 and X5 UPT Power Nozzles - Dark Grey","description":"\u003cp\u003eEvery push across carpet wears the leading sole panel of a power nozzle a little more, and part 5413DG is the dark grey front bottom plate that replaces that panel on SEBO X2 and X5 UPT heads. It sets how the nozzle rides on the floor and forms the front edge of the intake opening.\u003c\/p\u003e\u003cp\u003eTwo things depend on it. The first is glide: the plate is the surface actually in contact with the floor, so its condition decides whether the head slides evenly or grabs and skates across a rug. The second is sealing, because the gap between the plate and the floor is the air channel through which everything is drawn in. Scuffs, thin spots and cracks change both at once. Once the plate no longer holds its height, the nozzle stops sealing against the surface, and the result is patchy pickup that no quantity of new bags or filters will cure. On hard floors, a worn plate also starts leaving marks of its own.\u003c\/p\u003e\u003cp\u003eA factory plate returns the original glide and closes the air channel back up. It is one of the more satisfying repairs on an upright, because the improvement is immediate and obvious on the first pass. Colour distinguishes this part from its neighbours in the range rather than any difference in shape, so match the dark grey finish to your machine before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO X2 and X5 UPT power nozzles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e front of the nozzle underside\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e dark grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e sets nozzle height and forms the front of the intake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the plate is worn thin or cracked, or the head skates and picks up unevenly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5413DG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther finish:\u003c\/strong\u003e the gray black front bottom plate for the same nozzle is SEBO 5413GS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCheck the rear plate and the wheels at the same time so the head sits level, since a new front plate working against a worn rear one simply moves the problem. The complete rear bottom plate assembly is SEBO 5414DG.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":49015239770362,"sku":"5413DG","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5413dg-00_588af086-956b-4973-907e-ebbde36af5b2.jpg?v=1785039361"},{"product_id":"sebo-x2-x5-upt-rear-bottom-plate-complete-assembly","title":"SEBO Rear Bottom Plate Assembly for X2 and X5 UPT Uprights","description":"\u003cp\u003eRattling at the base of a SEBO X2 or X5 UPT usually traces back to the rear underside, where this complete bottom plate assembly mounts. Part 5414DG closes off the back of the chassis, holds the brush chamber and the air route shut, and keeps grit away from what sits above it.\u003c\/p\u003e\u003cp\u003eBecause it arrives as a full assembly rather than a bare panel, everything needed to close the rear of the machine comes in the one part. That is a useful difference when the original has broken around its fixings rather than in the middle, which is the more common failure, since the mounting points carry the load every time the machine is set down or dragged over a threshold. A warped or split plate lets air in where none belongs, and the machine reports it twice over: pickup at the nozzle weakens because the suction is being satisfied by a leak instead of by the floor, and the base develops a hard rattle audible across the room.\u003c\/p\u003e\u003cp\u003eGetting the rear sealed again is what returns the consistent airflow these uprights are built around. It is also worth doing promptly, because an unsealed base draws grit into the chamber above it, and grit finds its way to bearings and belts long before anyone thinks to look for it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO X2 and X5 UPT uprights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e rear of the chassis underside\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e a complete assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e closes and seals the underside at the rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the original is cracked or warped, the base rattles, or suction has dropped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5414DG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther finish:\u003c\/strong\u003e the gray black rear bottom plate, complete, is SEBO 5414GS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe front bottom plate on the same nozzle wears at a similar rate, so it is worth inspecting while the machine is turned over; in dark grey that part is SEBO 5413DG. Genuine SEBO X2 rear bottom plate, X5 UPT base plate assembly, part 5414DG. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":49015239934202,"sku":"5414DG","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5414dg-00_efb27dc0-dba3-4eac-84a4-2568a533aed3.jpg?v=1785039356"},{"product_id":"sebo-x4-x5-exhaust-filter-cover-white","title":"SEBO Exhaust Filter Cover for X4 and X5 Uprights - White","description":"\u003cp\u003eLosing the panel over the exhaust filter leaves the element free to shift in its pocket, and once it moves, fine dust finds the gap around the edge instead of passing through the media. Part 5711GW is the white cover that replaces that panel on SEBO X4 and X5 uprights.\u003c\/p\u003e\u003cp\u003eIt clips over the exhaust compartment, holds the post-motor filter down against its seat, and directs the cleaned air out of the back of the machine. It also finishes the rear of the housing, so a cracked or absent one is obvious at a glance rather than something you have to hunt for. The failure modes are the ordinary ones for a clipped plastic part on an appliance that gets knocked about: a clip snapped during a filter change, a crack across the face after the machine went over on the stairs, or the cover simply lost somewhere after a service and never refitted.\u003c\/p\u003e\u003cp\u003eRunning without it is worse than it looks. The exhaust filter is the last stage before air returns to the room, and an element that is not held flat loads unevenly and lets a proportion of the airflow past its edge entirely. That is the whole sealed-system principle undone by a missing clip-on panel. The replacement snaps on without tools, so there is no reason to leave it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO X4 and X5 uprights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e white, as fitted from the factory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e holds the post-motor exhaust filter down on its seat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e snaps on, no tools required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the cover is cracked or missing, or the filter shifts in its pocket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5711GW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther finish:\u003c\/strong\u003e the dark blue exhaust filter cover for the X4 and X5 is SEBO 5711DB\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFit a fresh exhaust filter at the same time if the old one has gone grey, since a cover that has been loose for a while has usually let the filter work unevenly. Bags and filters for the X4 and X5 come together in HEPA service box SEBO 5827ER.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":49015240229114,"sku":"5711GW","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5711gw-00_6298529c-798c-4f47-905e-5e9c9ee1c395.jpg?v=1785039364"}],"url":"https:\/\/evacuumsandmore.com\/collections\/sebo-x5.oembed?page=2","provider":"Vacuums and More","version":"1.0","type":"link"}