{"title":"Sebo","description":"Crafted with precision and designed to perfection, SEBO vacuums embody the pinnacle of German engineering—where quality, dependability, and reliability are not just features, but promises. These machines combine sleek aesthetics with robust performance, ensuring a superior cleaning experience. Advanced filtration systems make them ideal for allergy sufferers, capturing fine dust and allergens with ease. Renowned for their durability, SEBO vacuums are built to last, making them a wise investment for those who value cleanliness and efficiency. Choose SEBO for an effortless cleaning solution that stands the test of time.","products":[{"product_id":"axle-for-et-c","title":"SEBO Axle for ET-C Power Heads","description":"\u003cp\u003eInside an ET-C power head this shaft is the pivot a moving assembly turns on as the nozzle travels across carpet and hard floors. Part 2009 is the genuine SEBO axle for that position.\u003c\/p\u003e\u003cp\u003eAn axle that has worn oval, taken a bend, or packed itself with wound hair and fine grit stops letting the component it carries turn freely. You feel it as a head that has become heavier to push, hear it as a rattle or a squeak that was not there a year ago, or notice it as drag pulling the nozzle to one side of the pass. Whatever the axle carries then wears faster than it should, since a shaft no longer running true loads its bearing surfaces unevenly. A straight replacement takes the friction back out of the head.\u003c\/p\u003e\u003cp\u003eFitment is straightforward: SEBO ET-C power heads, one axle, supplied on its own rather than as part of a kit. What is worth knowing is that an axle rarely fails alone. The debris that wears a shaft has usually been through the bearing seats and the wheels around it first, so a head opened for this reason is a head worth going through properly while it is on the bench. The axle spring, part 2010, is listed for the ET-C as well and is the natural companion order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO ET-C power heads\u003c\/li\u003e\n\u003cli\u003eFunction: shaft for a rotating assembly inside the power head\u003c\/li\u003e\n\u003cli\u003eReplace when: the head is stiff to push, rattles, or drags to one side\u003c\/li\u003e\n\u003cli\u003ePart number: 2009, sold individually\u003c\/li\u003e\n\u003cli\u003eRelated ET-C service parts: 2010 axle spring, 2002SW chassis and bottom plate set, 2005ER metal bottom plate set\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWith the head apart it is worth clearing thread and hair off the wheels and checking the bearing seats before everything goes back together, since the debris that finishes an axle is usually working on its neighbours as well. Genuine SEBO spare, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472208634,"sku":"2009","price":12.0,"currency_code":"USD","in_stock":true}]},{"product_id":"axle-for-370-electronic","title":"SEBO Axle for the ELECTRONIC 370","description":"\u003cp\u003eOrdering the right axle for a 370 matters, because SEBO lists two of them. Part 2525 is the plain axle covered by this listing, while the pile adjustment shaft carries its own number, 2524. Both are used on the SEBO ELECTRONIC 370, and neither substitutes for the other.\u003c\/p\u003e\u003cp\u003eAn axle takes constant rotational load plus the occasional shock every time the machine is dragged over a threshold or bumped down a step. Wear concentrates where the shaft runs in its bearing faces, and it shows up as a wobble, a knock over hard floors, or components that no longer sit square on the shaft and start to run untrue. Once that happens the wear stops being confined to the axle: whatever it carries begins to wear at an angle, and a small part turns into a more involved repair.\u003c\/p\u003e\u003cp\u003eA straight, unworn axle puts the geometry back and stops that spreading. Check the shaft for scoring and for play at the ends before deciding, and if the fault lies with the height setting rather than the running gear, the part wanted is 2524 instead. Other 370 items worth inspecting while the machine is apart are the brush roller pulley 2458, the inner roller bearing 2467, the bumper 2522HG and the brush strip cover 2542.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2525, sold individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistinct from:\u003c\/strong\u003e the pile adjustment axle, part 2524\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e there is play, a knock over hard floors, or visible wear along the shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom it cures:\u003c\/strong\u003e components running untrue on a worn shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder note:\u003c\/strong\u003e quote 2525 so the plain axle is picked rather than the adjustment shaft\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO component supplied by an authorized dealer; ships in 2-5 business days. Searches for a SEBO 370 axle or an ELECTRONIC 370 shaft replacement both describe this number.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472274170,"sku":"2525","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1eebec18becacc80d67d70f369e1504a.jpg?v=1786669974"},{"product_id":"axle-for-swivel-neck-supports-for-et-1-and-et-2","title":"SEBO Swivel Neck Support Axle for ET-1 and ET-2 Power Heads","description":"\u003cp\u003eEvery change of direction is absorbed by the neck joint between wand and power head. Part 2928 is the axle the swivel neck supports turn on, drawn at position 126 on SEBO's ET-1\/ET-2, DART and FELIX parts sheets, sitting one number along from the neck switch wiring that runs through the same joint.\u003c\/p\u003e\u003cp\u003eWear here is felt rather than seen. The head starts to lag behind the handle, flops at the end of a stroke, or refuses to follow into a turn at all. The right and left supports the shaft passes through are listed separately as 2311 and 2312 at positions 123 and 124, and they wear in step with it, so put a thumb on both and check for play while the joint is open. If the swivel also feels notchy rather than merely loose, the six-piece metal segment set 2950ER and the swivel neck bearing 2954 are the next two items on the same sheet worth inspecting. Disconnect the machine from the outlet before disturbing anything that carries power down into the head.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2928, supplied singly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ET-1 and ET-2 power heads, switched and unswitched\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e FELIX Premium, FELIX 2 Premium, DART, C3.1, AIRBELT D4 PREMIUM, AIRBELT E3 Premium and AIRBELT K3 PREMIUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e pivot shaft carrying the swivel neck supports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 126 on the ET-1\/ET-2, DART and FELIX lists\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 2311 support right, 2312 support left, 2954 swivel neck bearing, 2950ER metal segment set, 2307GS complete swivel neck\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical symptom:\u003c\/strong\u003e a head that wanders, flops or fights the line you are steering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA SEBO ET-1 axle replacement is a bench job rather than a roadside one, but it is the quickest way to bring the steering back to where it was, and always worth doing while the neck is apart for any other reason. Genuine SEBO stock from an authorized dealer; ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472339706,"sku":"2928","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2928.jpg?v=1709347663"},{"product_id":"axle-for-disco","title":"SEBO Replacement Axle for the DISCO Floor Polisher","description":"\u003cp\u003eInside the SEBO DISCO floor polisher, a small shaft gives one of the moving assemblies its pivot. Part 2938ER is the factory item for that job, made to the original diameter and length so the piece it carries turns true rather than wandering in an oversized bore.\u003c\/p\u003e\u003cp\u003eSEBO's DISCO parts list puts the axle at position 16, between the switch lever at 15 and the complete motor assembly at 17, in the group of hardware that sits behind the head rather than under it. Axles wear slowly and quietly. Hair and fine grit work their way onto the shaft, the surface scores, and the rotation picks up drag or a faint knock; a bent shaft announces itself as a component that turns with a wobble. Clearing the seat and fitting a fresh axle puts that movement back where it belongs, and it is worth doing while the machine is already opened for any other reason.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2938ER, supplied singly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO DISCO floor polisher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose:\u003c\/strong\u003e pivot shaft for a rotating assembly inside the machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 16 on the DISCO parts list\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore fitting:\u003c\/strong\u003e clear wound hair and grit from the shaft seat so the new axle sits square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther DISCO service parts:\u003c\/strong\u003e 3221 drive belt, 3222 motor pulley, 3220ER center castor, 3254GS rear castor, 3250ER centrifuge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck hardware on the same list:\u003c\/strong\u003e 3226GS turning swivel neck, 3258GS swivel neck support, 3257ER swivel neck support L.H.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAnyone hunting a genuine SEBO DISCO axle is normally chasing a knock, a drag or a wobble rather than an outright breakage, so it pays to inspect the surrounding bearing surfaces at the same time and change what is worn while the machine is open. Ordered through our authorized SEBO account and shipped in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472405242,"sku":"2938ER","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/ebd37aba63c821a0a42581d4834415cf.jpg?v=1786670667"},{"product_id":"axle-for-dust-bag-lever-for-300-and-350","title":"SEBO Axle for the Dust Bag Lever - 300 and 350 MECHANICAL","description":"\u003cp\u003eEvery lever needs something to turn on. Part 50123ER is the axle the dust bag lever pivots around on the SEBO 300 MECHANICAL and 350 MECHANICAL, a small pin carrying a control that gets used at every bag change for the working life of the machine.\u003c\/p\u003e\n\u003cp\u003eWear here comes on gradually rather than as a clean failure. The bore opens up, the pin slackens, and the lever begins to sit crooked or move with more slop than it should, until eventually it will not hold its latched position at all. Operators describe it as the lever feeling sloppy or the bag not staying put, and the lever gets blamed and replaced while the worn pin underneath it goes back in. The axle costs a fraction of the parts it carries, so renewing both while the mechanism is open is the sensible order of work.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSEBO part number:\u003c\/strong\u003e 50123ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e the SEBO 300 MECHANICAL and 350 MECHANICAL uprights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e pivot pin for the dust bag lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGoes with:\u003c\/strong\u003e bag lever 50122OR and return spring 50124ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e a lever with play in it, sitting crooked or failing to latch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSits in:\u003c\/strong\u003e the release mechanism on the front of the dust bag compartment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThose three parts make up the release mechanism on the front of bag housing 50100SE, alongside bag holder 50125ER which locates the bag collar against the inlet. If the compartment is being stripped anyway, the mounting fitting 50131HG and the bumper base 50118HG along its lower edge are the neighboring items most often found damaged. Filter bags for these uprights are ordered as 5093AM, and the pre-motor filter behind safety catch 50205ER is stocked as 5036AM, 5425AM or 5812ER.\u003c\/p\u003e\n\u003cp\u003eGenuine SEBO hardware supplied by an authorized dealer; typically out the door inside 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472438010,"sku":"50123ER","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/50123ER.jpg?v=1709347661"},{"product_id":"axle-for-chassis-on-x1-x2-x4-x5-and-g-series","title":"SEBO Chassis Axle for AUTOMATIC X and ESSENTIAL G Uprights","description":"\u003cp\u003eJust the bar, not the whole rear group: part 5053 is the plain axle running across the chassis of an AUTOMATIC X or ESSENTIAL G upright, carrying the rear wheels on either end. SEBO shows it at position 118 in the AUTOMATIC X4\/X5 exploded diagram.\u003c\/p\u003e \u003cp\u003eThis is the part to order when the wheels and pedal are still sound but the bar itself has bent or worn where it turns, which is what makes an upright drag to one side or roll unevenly across a hard floor. A bent axle is easy to confirm once the machine is on its side: the wheels will not sit in the same plane, and one of them will show a rub mark on the housing where it has been running out of true. On its own it is a much smaller job than swapping the whole rear group, and there is no reason to take more parts than the fault calls for.\u003c\/p\u003e \u003cp\u003eThe parts around it are all listed separately, which makes a targeted repair straightforward. The axle spring is 2010 and the retaining clamps are 2014 individually or 2014ER as a ten pack, worth having in the drawer since they are easy to lose during the job. The orange release pedal is 5059OR. If the wheels and pedal have gone as well, the complete rear assembly is 5051GS in gray black for the AUTOMATIC X machines and 5051HG in light gray for the ESSENTIAL G.\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePart number: SEBO 5053, axle only\u003c\/li\u003e \u003cli\u003eFits: SEBO AUTOMATIC X1, X2, X4, X4 Boost and X5\u003c\/li\u003e \u003cli\u003eAlso fits: SEBO ESSENTIAL G1, G2, G4 and G5\u003c\/li\u003e \u003cli\u003eDiagram position: 118 in the AUTOMATIC X4\/X5 exploded parts diagram\u003c\/li\u003e \u003cli\u003eRelated part numbers: 2010 axle spring, 2014 and 2014ER axle clamps, 5059OR foot pedal, 5051GS and 5051HG complete assemblies\u003c\/li\u003e \u003cli\u003eGenuine SEBO hardware from an authorized dealer; ships in 2-5 business days\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eTypical searches that arrive here are SEBO chassis axle 5053, AUTOMATIC X4 rear axle bar and ESSENTIAL G5 wheel axle replacement.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472470778,"sku":"5053","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5053.jpg?v=1785140329"},{"product_id":"axle-assembly-for-370-electronic-light-gray","title":"SEBO Axle Assembly for the ELECTRONIC 370 — Light Gray","description":"\u003cp\u003eShaft, wheel and mounting hardware arrive together in part 2630HG, the light gray axle assembly for the SEBO ELECTRONIC 370. Buying it made up renews the running gear in one operation instead of piecemeal.\u003c\/p\u003e\u003cp\u003eThis axle carries the weight of the machine on every stroke and takes a shock load each time the vacuum is bumped over a threshold or dropped the last inch onto a hard floor. A shaft that has bent, or a bore that has worn oval, turns into wobble and uneven rolling, and the extra load is then thrown at the plastics around it. The machine feels heavy, tracks badly, and can leave the nozzle sitting at the wrong height on one side.\u003c\/p\u003e\u003cp\u003eReplacing the whole unit removes any argument about which half had actually gone, which is the usual difficulty once a shaft and a bore have worn into each other. Note how the old assembly is oriented as it comes out, clear packed hair from around the shaft, and check the remaining wheels for wear while the machine is turned over.\u003c\/p\u003e\u003cp\u003eIndividual light gray wheels for this model are listed under 2614HG if only one wheel has failed and the shaft is sound. Anyone searching for a SEBO 370 axle or an ELECTRONIC 370 wheel and axle replacement is looking at this number.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2630HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e complete assembly with shaft, wheel and mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptom:\u003c\/strong\u003e wobble, uneven rolling or a machine that has become hard to push\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 2614HG complete wheel, 2543HG complete chassis\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO component from an authorized dealer. Ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472536314,"sku":"2630HG","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/030fae07dd9a6d84645ea7023db5d302.jpg?v=1786670013"},{"product_id":"bag-cover-axle-set-for-d1-and-d4","title":"SEBO Bag Cover Axle Set for AIRBELT D1 Turbo and D4 Premium","description":"\u003cp\u003eThe bag compartment door on a SEBO D series canister swings on a pair of pivots rather than a moulded hinge, and 6750ER is the set of pivot hardware for them. SEBO catalogues it as position 24 of the AIRBELT D parts sheet, a few numbers along from the filter bag spring at 23 and the bag cover seal at 34 — the three components that together decide whether the compartment actually closes airtight.\u003c\/p\u003e\u003cp\u003eThat grouping is the useful part. The axle set carries the door, the 8130 seal is the face it lands on, and the 8140ER spring behind it pushes the 8120AM AeraPure bag forward against its holder. Worn pivots let the door drop a millimetre or two at one end, so it meets the seal unevenly and the compartment breathes. What the owner notices is a door that sags open, feels gritty through its travel or springs back instead of latching, followed by dust around the cover edge and weaker pull at the floor tool.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 6750ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e SEBO AIRBELT D1 TURBO and D4 PREMIUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e the axle set for the bag compartment door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 24, AIRBELT D parts sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjacent numbers:\u003c\/strong\u003e 8130 cover seal at 34, 8140ER bag spring at 23\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixes:\u003c\/strong\u003e a sagging, stiff or non-latching bag cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumable it serves:\u003c\/strong\u003e 8120AM AeraPure filter bags for these canisters\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSEBO also catalogues a bag indicator adjuster at position 33 of the same sheet, part 8127ER, which is worth knowing about if the bag light behaves oddly once the cover shuts properly again. Searches for a SEBO bag cover axle, a D series hinge pin set or a D4 Premium cover pivot all lead to this kit.\u003c\/p\u003e\u003cp\u003eWith the cover off, run a finger round the seal: perished rubber there undoes the benefit of new pivots, and both are quick jobs while the machine is open. Factory SEBO pivot parts, supplied by an authorized dealer and usually with you inside 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472569082,"sku":"6750ER","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/192285878d117ca1ef5fa3fdef6a7345.jpg?v=1786670047"},{"product_id":"axle-with-wheel-for-300-and-350-light-gray","title":"SEBO Axle with Wheel for 300 and 350 Mechanical Uprights — Light Gray","description":"\u003cp\u003eHow a SEBO 300 Mechanical or 350 Mechanical rolls comes down to the axle under the back of the body, and part 50348HGER supplies that axle with its light gray wheel already mounted. Ordering it as a made-up assembly is the point: shaft and running surface are renewed together in a single fitting, with no pressing a bare wheel onto a worn spindle and hoping it runs true. SEBO carries it at position 125 in the exploded drawing that covers both machines.\u003c\/p\u003e\u003cp\u003eRear wheels on an upright take the whole weight of the machine every time it is pushed, tipped back, or hauled up a step, and they collect everything the floor has to offer. Hair and thread wind into the hub until the wheel drags instead of rolling. Grit works into the bearing surface and puts flat spots on the shaft. The tread hardens and eventually splits. The symptoms are easy to read: the vacuum limps or judders on a straight pass, one rear corner sits lower than the other, and hard flooring starts showing marks from a wheel that is no longer turning freely. None of that improves with cleaning once the shaft itself has worn.\u003c\/p\u003e\u003cp\u003eWheels wear as a pair, so hold the new assembly against the one on the opposite side before the machine goes back together — if the second wheel shows the same flats or the same play, change both and the vacuum will track straight again. With the back of the chassis open, it is also a sensible moment to look over the rear bottom plate, which is 50310HGER on the 300 Mechanical and 50311HGER on the 350 Mechanical.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder code:\u003c\/strong\u003e 50348HGER, SEBO axle and wheel assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e the 300 Mechanical and 350 Mechanical uprights from SEBO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShade:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 125\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e one axle with the wheel already fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the wheel drags, the tread is split, or the machine judders across a smooth floor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e axle clamp 2849, axle clamp 2014 (10-pack 2014ER), retaining ring 5424GS1 single or 5424GS in a 10-pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAuthorized-dealer SEBO running gear, on its way in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472601850,"sku":"50348HGER","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1e5524e1d607fdb79367e1dc4a1d9c39.jpg?v=1786669473"},{"product_id":"axle-with-wheels-foot-pedal-and-spring-for-x1-x2-x4-and-x5-gray-black","title":"SEBO Rear Axle Assembly with Wheels, Pedal and Spring for AUTOMATIC X1, X2, X4, X4 Boost and X5 — Gray Black","description":"\u003cp\u003eOne assembly does two jobs at the back of an AUTOMATIC X upright: it carries the rear wheels the machine rolls on and it holds the pedal that releases the handle into the reclined position. Part 5051GS is that unit in gray black, listed at position 116 in SEBO's AUTOMATIC X4\/X5 diagram, with items 117 through 120 making up its individual pieces.\u003c\/p\u003e \u003cp\u003eWheels, pedal and spring all age at much the same rate, so taking the complete set is usually the last work the back end needs for years. Fitting it whole also avoids tensioning a new spring against plastic that is already worn, which is what shortens the life of a piecemeal repair. The symptoms that send people here are a machine that rolls unevenly or pulls to one side, a handle that will not stay upright, and a pedal that has to be pressed twice before the latch lets go.\u003c\/p\u003e \u003cp\u003eThe individual numbers inside the group are useful when only one thing has broken. The orange foot pedal on its own is 5059OR, shown at position 117; the bare axle is 5053 at position 118; the axle spring is 2010 and the clamps that retain the axle are 2014 singly or 2014ER in a ten pack. Where two or more of those have gone, the complete assembly is the cleaner job.\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePart number: SEBO 5051GS\u003c\/li\u003e \u003cli\u003eColor: gray black\u003c\/li\u003e \u003cli\u003eFits: SEBO AUTOMATIC X1, X2, X4, X4 Boost and X5\u003c\/li\u003e \u003cli\u003eSupplied as one unit: axle, rear wheels, release pedal and return spring\u003c\/li\u003e \u003cli\u003eDiagram position: 116 in the AUTOMATIC X4\/X5 exploded diagram, covering items 117 to 120\u003c\/li\u003e \u003cli\u003eRelated part numbers: 5059OR foot pedal, 5053 axle, 2010 axle spring, 2014 and 2014ER axle clamps\u003c\/li\u003e \u003cli\u003eGenuine SEBO assembly from an authorized dealer; ships in 2-5 business days\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSearches such as SEBO AUTOMATIC X4 rear axle, X5 wheel and pedal assembly, or SEBO part 5051GS all describe this item. Service supplies for the same machines are worth adding while the upright is on its side: the service box 5828AM brings eight bags with a microfilter, exhaust filter and sealing strip, and 5827AM is the HEPA equivalent.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472634618,"sku":"5051GS","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5051GS_aa6c1f04-5bd0-44a1-a4ec-8690345ef717.jpg?v=1785149395"},{"product_id":"axle-with-wheels-foot-pedal-and-spring-for-g-series-light-gray","title":"SEBO Rear Axle Assembly with Wheels, Pedal and Spring for ESSENTIAL G Series — Light Gray","description":"\u003cp\u003eLight gray with the orange pedal SEBO uses across the ESSENTIAL range, part 5051HG is the complete rear assembly for a G series upright. It arrives as a single unit, so the axle, both wheels, the foot release and its return spring are renewed at the same moment. SEBO shows it at position 117 in the ESSENTIAL G4\/G5 parts diagram.\u003c\/p\u003e \u003cp\u003eThe signs it is due are easy to read. The machine wobbles or tracks off line as it is pushed, or the handle drops out of the upright position because the pedal no longer holds it. Replacing the group as one means the new spring works against new plastic, which is what keeps the latch positive rather than vague. It also saves opening the same corner of the machine twice in a year.\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePart number: SEBO 5051HG\u003c\/li\u003e \u003cli\u003eColor: light gray with orange pedal\u003c\/li\u003e \u003cli\u003eFits: SEBO ESSENTIAL G1, ESSENTIAL G2, ESSENTIAL G4 and ESSENTIAL G5\u003c\/li\u003e \u003cli\u003eDiagram position: 117 in SEBO's ESSENTIAL G4\/G5 parts diagram\u003c\/li\u003e \u003cli\u003eOne unit covering the axle, both wheels, the release pedal and its spring\u003c\/li\u003e \u003cli\u003eRelated part numbers: 5059OR foot pedal, 5053 axle, 2010 axle spring, 2014 and 2014ER axle clamps\u003c\/li\u003e \u003cli\u003eGenuine SEBO part from an authorized dealer, shipping in 2-5 business days\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWhere only one piece has failed there is no need to take the whole group. The orange pedal is sold on its own as 5059OR, the plain chassis axle as 5053, the axle spring as 2010, and the retaining clamps as 2014 singly or 2014ER in a ten pack. The equivalent complete assembly for the AUTOMATIC X uprights is 5051GS in gray black, which is worth knowing if you keep both families in the same house or on the same round.\u003c\/p\u003e \u003cp\u003ePeople find this listing looking for a SEBO ESSENTIAL G4 axle, a G5 rear wheel assembly, a G1 or G2 foot pedal repair, or SEBO part 5051HG by number.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472700154,"sku":"5051HG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5051HG_0c382add-d9b1-4fd0-9863-7286550394ba.jpg?v=1785145207"},{"product_id":"access-door-axle-for-x-and-g-series","title":"SEBO Access Door Axle for AUTOMATIC X and ESSENTIAL G Series Uprights","description":"\u003cp\u003eThe bag access door swings on a slim axle, and everything about how that door sits depends on it. Bend the axle, or let it migrate sideways out of its housing, and the door stops closing square: one corner touches first, the seal is loaded unevenly, and the latch either fights or misses altogether. Part 5303 is the replacement axle.\u003c\/p\u003e\u003cp\u003eSEBO uses the same component across a wide span of machines, and the diagrams show it three times over — position 127 on the AUTOMATIC X4 \/ X5 sheet, position 138 on the AUTOMATIC X7 \/ X8 sheet and position 127 on the ESSENTIAL G4 \/ G5 sheet. On the X7 \/ X8 drawing it sits immediately beside the access door spring, 5304, at position 137, which is the pairing to keep in mind: axle and spring share the same duty cycle and a door that has been forced usually needs both. The AUTOMATIC X4 \/ X5 sheet also lists the door itself as 5172OR at position 126, noted there as including its axle and spring.\u003c\/p\u003e\u003cp\u003eFitment covers the SEBO AUTOMATIC X1, X2, X4, X4 Boost, X5, X7 Premium, X7 Pet and X8, along with the ESSENTIAL G1, G2, G4 and G5. A door that will not latch, or one that rocks when pressed at a corner, is the symptom that leads here.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number 5303 — access door axle\u003c\/li\u003e\n\u003cli\u003eDiagram positions: 127 on AUTOMATIC X4 \/ X5, 138 on AUTOMATIC X7 \/ X8, 127 on ESSENTIAL G4 \/ G5\u003c\/li\u003e\n\u003cli\u003eFits SEBO AUTOMATIC X1, X2, X4, X4 Boost, X5, X7 Premium, X7 Pet and X8\u003c\/li\u003e\n\u003cli\u003eFits SEBO ESSENTIAL G1, G2, G4 and G5\u003c\/li\u003e\n\u003cli\u003eJob: the pivot the bag compartment door hinges on\u003c\/li\u003e\n\u003cli\u003eRelated number: access door spring 5304\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOne axle is supplied. It is small enough that most workshops keep one on the shelf, since a door forced open against a full bag tends to take the axle with it. Searches for a SEBO bag door hinge pin, an AUTOMATIC X7 access door pivot, or an ESSENTIAL G bag door repair all resolve to this part.\u003c\/p\u003e\u003cp\u003eGenuine SEBO access door axle, authorized dealer stock, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472732922,"sku":"5303","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5303.jpg?v=1785154129"},{"product_id":"axle-for-pile-adjustment-wheels-for-370-comfort","title":"SEBO Pile Adjustment Wheel Axle for the 370 COMFORT","description":"\u003cp\u003eHeight selection on the SEBO 370 COMFORT rides on a single shaft. Part 20126ER is that shaft, the axle the pile adjustment wheels rotate around inside the cleaning head, and the component that decides whether a chosen setting stays chosen.\u003c\/p\u003e\u003cp\u003eBecause the height gets changed every time the machine moves from a rug to bare boards, this small part sees far more cycles than its size suggests. Bend it, or wear out the seats it turns in, and the wheels stop indexing cleanly: the setting wanders under load, the control goes vague underfoot, and the nozzle either scrubs the carpet or floats above it. A straight replacement axle brings the mechanism back to definite, repeatable steps.\u003c\/p\u003e\u003cp\u003eThe axle is listed for the 370 COMFORT. Height adjustment is one of the few mechanisms on an upright the user operates deliberately every session, which is why its parts wear at a rate that surprises people. Judging the shaft is simple once it is out: roll it across a flat surface and any bend shows itself immediately. If it is straight and the setting still wanders, the wear has moved into the wheels or into the lever that indexes them.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT\u003c\/li\u003e\n\u003cli\u003eFunction: carries the pile adjustment wheels in the cleaning head\u003c\/li\u003e\n\u003cli\u003eReplace when: the height setting will not hold, the wheels bind, or the shaft is visibly bent\u003c\/li\u003e\n\u003cli\u003ePart number: 20126ER\u003c\/li\u003e\n\u003cli\u003eCheck at the same time: the pile adjustment lever, part 20127ER, and its knob, part 20128ER\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAnything in the height mechanism is easiest to judge with the head already apart, so look over the lever, the knob and the wheels themselves before it all goes back together. Anyone searching for a SEBO 370 height adjustment shaft, a pile adjustment axle or a 370 COMFORT carpet height repair part is in the right place. Genuine SEBO stock, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472798458,"sku":"20126ER","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/20126ER.jpg?v=1709347662"},{"product_id":"pile-adjustment-axle-for-370-electronic","title":"SEBO Pile Adjustment Axle for the ELECTRONIC 370","description":"\u003cp\u003eHeight settings that drift back on their own, or a pile adjustment that turns without changing anything, usually mean the axle it acts through has worn or broken. Part 2524 is that axle on the SEBO ELECTRONIC 370.\u003c\/p\u003e\u003cp\u003ePile adjustment raises and lowers the cleaning head so the brush sits correctly in the carpet. Too high and the roller skates over the surface, leaving the grit down in the pile; too low and it drags, loading the motor and wearing the bristle strip flat in a fraction of its normal life. This axle is the shaft that carries the adjustment motion across to the head, so everything the control does has to pass through it. When it wears at the bearing faces or shears outright, the link between control and head is lost, and the setting either slips under load or stops responding at all.\u003c\/p\u003e\u003cp\u003eRenewing the axle gives back a positive, repeatable height setting, and the difference is obvious on the first pass over cut pile. Take care with the number: SEBO lists two axles for this machine, and the plain one is 2525. They are not interchangeable, so quote 2524 for the pile adjustment shaft. If the strip itself has worn flat rather than the setting drifting, the height control is not the fault to chase.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2524\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart supplied:\u003c\/strong\u003e pile adjustment axle, sold singly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCures:\u003c\/strong\u003e a height control that slips, drifts, or feels disconnected from the head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot to be confused with:\u003c\/strong\u003e the separate axle listed as 2525\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated 370 spares:\u003c\/strong\u003e brush strip cover 2542, brush roller pulley 2458, inner roller bearing 2467\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO spare from an authorized dealer; ships in 2-5 business days. A search for a SEBO 370 pile height adjuster shaft or an ELECTRONIC 370 pile adjustment axle lands on this part.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472831226,"sku":"2524","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/f24581052d975e814cc4239a61c40ee0.jpg?v=1786669971"},{"product_id":"pile-adjustment-axle-for-g-series-300-and-350","title":"SEBO Pile Adjustment Axle for G Series and 300\/350 Uprights","description":"\u003cp\u003eEvery notch of carpet height on these uprights is carried by a single shaft. Part 2861 is that shaft: the pile adjustment axle shared by the SEBO ESSENTIAL G1, ESSENTIAL G2, ESSENTIAL G4 and ESSENTIAL G5 and by the 300 MECHANICAL and 350 MECHANICAL, drawn at position 118 on the SEBO 300\/350 Mechanical sheet.\u003c\/p\u003e\u003cp\u003eTurning the height control rotates this axle, and the axle in turn sets how far the nozzle drops toward the floor. Everything else in the mechanism — the thrust members, the spring, the clamps, the rubbing plate — exists to hold it steady and let it index cleanly. An axle that has been bent, or worn where it passes through its bearing points, tends to bind at one end of its travel, or to leave the nozzle sitting lower on one side than the other so the brush grooms unevenly and one edge of the head wears its strip away first. A machine that will only hold the deepest setting, or that fights the operator halfway through the range, is showing the same fault.\u003c\/p\u003e\u003cp\u003eThe parts that ride on this axle are inexpensive and are already exposed once the chassis is open, so there is little sense refitting tired ones: clamp 2856 captures the spring, spring 2867 loads the assembly, thrust member 2834 bears on the axle with 2833 serving the knob, rubbing plate 2869HG is the sacrificial face, axle clamp 2849 retains the pile wheel axle, and pile adjustment wheel 5174HG completes the set. Common searches are SEBO pile adjustment axle, G series carpet height shaft and 300 MECHANICAL height adjustment axle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSEBO part 2861 — pile adjustment axle\u003c\/li\u003e\n\u003cli\u003eFits: SEBO ESSENTIAL G1, G2, G4 and G5, plus the 300 MECHANICAL and 350 MECHANICAL\u003c\/li\u003e\n\u003cli\u003eParts-diagram position: 118 on the SEBO 300\/350 Mechanical sheet\u003c\/li\u003e\n\u003cli\u003eTypical symptom: height control binding, or a nozzle sitting lower on one side\u003c\/li\u003e\n\u003cli\u003eRelated hardware: 2856 clamp, 2867 spring, 2834 and 2833 thrust members, 2869HG rubbing plate, 2849 axle clamp, 5174HG pile adjustment wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine SEBO\u003c\/strong\u003e; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472863994,"sku":"2861","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2861.jpg?v=1785154258"},{"product_id":"bearing-block-l-h-for-370-electronic-and-et-c","title":"SEBO Bearing Block Left Hand - 370 \u0026 ET-C","description":"\u003cp\u003eEvery SEBO ET-C power head carries its brush roll in a pair of plastic bearing blocks, and this is the left-hand one, ordered as part 2091. It fits the ET-C power heads and the Electronic 370.\u003c\/p\u003e\u003cp\u003eBearing blocks are the first thing to wear in a power head that has run for years. The brush roll starts to grind or whine, one end sits lower than the other, the roller wobbles instead of turning true, and the belt begins to track off center. Left alone, a collapsing block will chew up the brush roll end cap as well.\u003c\/p\u003e\u003cp\u003eFit it with the brush roll out: lift the roller, swap the block, drop the roller back in and check that it spins freely by hand. This is the left side only, so if both ends feel rough, order the right-hand block at the same time.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472929530,"sku":"2091","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2091.jpg?v=1785156494"},{"product_id":"bearing-block-l-h-complete-for-et-1-and-et-2-gray-black","title":"SEBO Left-Hand Bearing Block for ET-1 and ET-2 Power Heads — Gray Black","description":"\u003cp\u003ePosition 102 on SEBO's exploded views marks the left-hand brush roll bearing, and 2314GS is that component in gray black, assembled and ready to seat. The same position number applies across the ET 1 \/ ET 2 power head, DART and FELIX diagrams, so whichever sheet you are working from the reference holds.\u003c\/p\u003e\u003cp\u003eLeft and right blocks are not interchangeable and carry separate part numbers, so identify which end has gone noisy before ordering. Grinding under load, a roll that will not turn freely by hand, or visible play when you rock the roll in its seat all point at the bearing rather than the belt. The distinction matters because a slipping belt and a failed bearing can both leave a head that cleans poorly on carpet, yet the fix and the part are entirely different. With the roll out, spin each bearing on its own: a healthy one runs on smoothly for a few seconds, a failed one feels notchy or stops immediately, and a housing that has worn oval will let the whole bearing turn in its seat.\u003c\/p\u003e\u003cp\u003eBecause both ends accumulate identical hours, pairing this with the right-hand block, part 2313GS, avoids taking the head apart twice. Clear wound hair and thread from the roll shaft before reassembly, since that binding is what loads the bearings in the first place, and check the belt runs central on its pulley once everything is back together. Light gray ET-1 heads use the colour-matched block 2314HG instead of this one.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits the SEBO FELIX Premium, FELIX 2 Premium, DART, C3.1, AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium\u003c\/li\u003e\n\u003cli\u003eSuits ET-1 as well as ET-2 power heads, switched or unswitched\u003c\/li\u003e\n\u003cli\u003ePart number: 2314GS\u003c\/li\u003e\n\u003cli\u003eLeft-hand brush roll bearing block, supplied complete with the bearing seated\u003c\/li\u003e\n\u003cli\u003eFinish: gray black\u003c\/li\u003e\n\u003cli\u003eDiagram position: 102 in the ET 1 \/ ET 2, DART and FELIX parts lists\u003c\/li\u003e\n\u003cli\u003eRelated numbers: 2313GS right-hand block, 2314HG in light gray\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO part. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472962298,"sku":"2314GS","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2314GS.jpg?v=1785150350"},{"product_id":"bearing-block-l-h-complete-for-et-1-light-gray","title":"SEBO Left-Hand Bearing Block for Light Gray ET-1 Power Heads","description":"\u003cp\u003eSeated where the roll meets the left side of a light gray ET-1 head, 2314HG comes as one complete piece, housing and bearing together, so it drops straight into the frame with no press work and no loose parts to align.\u003c\/p\u003e\u003cp\u003eSEBO shows it at position 102 in the FELIX diagram. A tired left-hand block lets the roll sit slightly off square, which turns up as uneven bristle wear along the strip and extra noise every time the head is under load. Because the wear is gradual, most owners notice the cleaning result before they notice the sound: one side of the head keeps lifting pile properly while the other seems to skim over it, and a belt that used to sit central starts creeping toward one end of the pulley. Taking the roll out and spinning each bearing individually separates a worn block from a stretched belt in a few seconds.\u003c\/p\u003e\u003cp\u003eThe matching right-hand block is part 2313HG in the same light gray, and checking both together is the sensible approach given that the pair have run identical hours. Clear packed hair from the roll shaft while it is out, since that binding loads the bearings continuously, and confirm the roll coasts briefly after the head is switched off rather than stopping dead. The gray black version of this block is ordered as 2314GS.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits the SEBO FELIX Premium\u003c\/li\u003e\n\u003cli\u003eSuits ET-1 power heads built with or without an on\/off rocker\u003c\/li\u003e\n\u003cli\u003ePart number: 2314HG\u003c\/li\u003e\n\u003cli\u003eComplete left-hand bearing block, bearing already seated in the housing\u003c\/li\u003e\n\u003cli\u003eFinish: light gray, colour-matched to light gray heads\u003c\/li\u003e\n\u003cli\u003eDiagram position: 102, FELIX parts list\u003c\/li\u003e\n\u003cli\u003eRelated numbers: 2313HG right-hand block, 2314GS in gray black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAuthentic SEBO stock for anyone searching a FELIX Premium brush roll bearing or an ET-1 left-hand bearing block in light gray. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214472995066,"sku":"2314HG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/e8126626d4d9854cb13f92a5ea8bfac7.jpg?v=1786668853"},{"product_id":"bearing-block-assembly-l-h-for-duo-light-gray","title":"SEBO Left-Hand Bearing Block Assembly for the Duo, Light Gray","description":"\u003cp\u003eSupplied as an assembly rather than a bare moulding, part 3052HG puts the whole left-hand bearing station back into a Duo brush machine in one operation. SEBO shows it at position 70 of the Duo parts diagram, finished in light gray to match the rest of the machine, with the brush drive cog 3007 at 68 and the plain bearing block 3074HG at 69 immediately before it.\u003c\/p\u003e\u003cp\u003eBearing blocks wear from the inside out, and the sequence is always the same. The seat opens up, the shaft gains a little play, and the end of the brush begins to knock and drag rather than spinning freely. From the handle it sounds like a rumble that comes and goes with load, and on the carpet it looks like grooming that has gone patchy at one side. Because this part arrives complete, there is no matching of individual pieces on the bench - which matters on a repair where a fractional misalignment is enough to bring the noise straight back within a week. The right-hand side of the machine uses bearing block 3010HG under its own number, so check which end you have out before ordering, and look at the spring 3028 and the pulleys either side while the assembly is off.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3052HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e left hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e as a complete assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 70 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpposite side:\u003c\/strong\u003e right-hand bearing block 3010HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated:\u003c\/strong\u003e bearing block 3074HG, brush drive cog 3007, spring 3028\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAnyone searching a SEBO Duo bearing block, a Duo left hand brush bearing or the number 3052HG has the correct listing. Genuine SEBO assembly supplied by an authorized dealer, shipping in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473027834,"sku":"3052HG","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3052HG_8142e7a0-c8ac-4825-941f-f61275beec6d.jpg?v=1785143278"},{"product_id":"bearing-block-l-h-for-duo-light-gray","title":"SEBO Left-Hand Brush Roll Bearing Block for the Duo, Light Gray","description":"\u003cp\u003eLight gray and left-hand specific, SEBO 3074HG supports the left-hand end of the brush roll in the Duo brush machine. It is item 69 on the Duo parts diagram, sitting between the brush drive cog 3007 at 68 and the left-hand bearing block assembly 3052HG at 70, and its job is to give the roll a low-friction surface to spin against.\u003c\/p\u003e\u003cp\u003eBlocks wear from the inside out, and the fault reports itself long before anything breaks. A grinding note from one end of the head, a roll that visibly wobbles as it turns, or a roll that binds and drags on the motor all point at the block rather than at the brush strip itself. Left alone, the extra play works through into the belt, the pulleys and the drive cog, so a small moulding turns into a much larger repair. Two things are worth confirming before ordering. First the side, because the opposite end of the roll takes bearing block 3010HG under its own number. Second whether the bare block is what is needed at all, since SEBO also lists 3052HG as a complete left-hand bearing block assembly for machines where more than the block has gone. Colour is part of the identity here as well: this is the light gray moulding, matching the other light gray components along that side of the machine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3074HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e left hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 69 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpposite side:\u003c\/strong\u003e right-hand bearing block 3010HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete assembly version:\u003c\/strong\u003e 3052HG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSupplied as genuine SEBO stock by an authorized dealer, shipping in 2-5 business days. This is the listing for a Duo bearing block, a SEBO brush roll bearing or part 3074HG by number.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473093370,"sku":"3074HG","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0d2059866bb06300b26f82f325077344.jpg?v=1786670904"},{"product_id":"bearing-block-l-h-for-300-and-350-light-gray","title":"SEBO Left-Hand Brush Roll Bearing Block for 300 and 350 Mechanical — Light Gray","description":"\u003cp\u003eOn a SEBO 300 Mechanical or 350 Mechanical the brush roller turns in a block at either end, and part 50355HG is the light gray one on the left. It gives the shaft a low-friction seat so the roller can spin all day without loading up the belt. Its opposite number is 50356HG, and one will not stand in for the other, so check which side you are holding before ordering.\u003c\/p\u003e\u003cp\u003eBearings turn every second the machine runs, so wear here is a question of when rather than whether. A tired left-hand block announces itself in three ways: a growl or rumble from the head that rises with brush load, a roller you can rock or lift by hand once the head is open, and bristle rows that have worn down more on one side than the other. Left alone, the play spreads. The roller leans, the belt runs off-centre and heats up, and the drive works harder to turn a brush that is dragging in its seat. A new block quiets the head and puts the roller back on a true axis.\u003c\/p\u003e\u003cp\u003eBearing blocks protect far larger components than themselves, so most technicians replace both ends at the same visit and clear wound hair out of the roller shafts while the head is open. If the belt has been running against a leaning roller, renew belt 5110 at the same time. The roller itself is 50470ER on the 300 Mechanical and 50471ER on the 350 Mechanical.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 50355HG, genuine SEBO bearing block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e left hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 300 Mechanical and 350 Mechanical uprights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShade:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e gives the left side of the roller shaft its running seat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymptoms:\u003c\/strong\u003e growling power head, roller play, uneven bristle wear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching and related parts:\u003c\/strong\u003e right-hand block 50356HG, belt 5110, brush rollers 50470ER and 50471ER, brush strip cover 50352HG\u003c\/li\u003e\n\u003cli\u003eFactory SEBO stock, not a copy, moving in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473158906,"sku":"50355HG","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3b7a2d34847a1b4f187fba37745aadc0.jpg?v=1786669477"},{"product_id":"bearing-block-l-h-for-x7-internal","title":"SEBO Left-Hand Internal Bearing Block for X7","description":"\u003cp\u003eA brush roll that rumbles, drags or wobbles at one end is usually telling you a bearing has had enough. Part 52111ER is the internal-pattern bearing block that carries the left side of the brush roll inside a SEBO X7 housing and lets it spin with almost no resistance.\u003c\/p\u003e\u003cp\u003eBearings in a vacuum cleaner live in fine grit and never stop turning, which is an unkind combination. Over time they roughen, begin to bind, or open up enough clearance for the roll to move around in its seat, and each of those failures has its own signature. Roughness comes through as noise from one side of the head. Binding shows up as a motor that sounds strained and a belt running hot. Clearance produces uneven brush contact, so the carpet is agitated harder at one end than the other and the brush strip wears out of square. A bearing that binds robs the roll of speed and leaves the motor pulling against friction it should never have to see.\u003c\/p\u003e\u003cp\u003eTwo details matter when ordering. The block is handed, so the left-hand part is not the same number as the right, and this is the internal style rather than an external one. Confirm both against the block you are taking out. If the head has been noisy for a while it is worth doing the pair, because a roll that has been running on one failed bearing has been loading the opposite end the whole time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e left hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e internal bearing block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e SEBO X7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e seats the roll's left-side shaft and keeps it running square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the roll rumbles, drags, or wobbles at the left end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 52111ER\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStrip wrapped hair and thread from both roller ends before the new block goes in, or the fresh bearing simply inherits the load that finished the last one. If the roller has also become awkward to remove, the right-hand brush roller release button for the red X7 is SEBO 52034DR. Genuine SEBO X7 bearing block, left hand brush roll bearing, part 52111ER.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473257210,"sku":"52111ER","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2158bc2c7bfbd931204f2e1cbe24c63d.jpg?v=1786670933"},{"product_id":"bearing-block-l-h-complete-for-x8-internal","title":"SEBO Bearing Block, Left Hand, Complete for AUTOMATIC X8","description":"\u003cp\u003eA grinding or rumbling note from the left end of the roller usually means the internal bearing block has had enough. Part 52121 is that block for the SEBO AUTOMATIC X8, supplied complete and shown at position 141 on the combined AUTOMATIC X7\/X8 parts diagram.\u003c\/p\u003e\u003cp\u003eThe left end is the driven end, which is why it wears first. SEBO's belt 5110 runs from the sensor pulley to this bearing block, so every rotation of the brush roll is delivered through it, under belt tension, for as long as the machine is switched on. A worn block lets the roller run out of true: the bristles stop meeting the carpet evenly across the width, the belt is pulled off line and starts to run hot, and the noise gets steadily worse rather than appearing overnight. Because this is the complete version, the bearing arrives already assembled into its block and goes into the housing as one piece, so there is no pressing or picking at a seized race.\u003c\/p\u003e\u003cp\u003eTwo neighbouring parts are worth having in mind. The left-hand brush cover 52134GS is the end cap that closes over this side of the housing, and it is often the reason grit reached the bearing in the first place if a clip has broken. The left-hand brush roller release knob 52224DB sits on the same end. SEBO also lists a sealed bearing, 52131, for this machine if a bearing rather than a whole block is what you are after.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 52121\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e left hand, internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e complete assembly, bearing already fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 141\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 5110 belt, 52198 sensor assembly, 52134GS left-hand brush cover, 52224DB left-hand release knob, 52131 sealed bearing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInspect the opposite end at the same time, as both sides accumulate hours at the same rate. Genuine SEBO, ships in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473289978,"sku":"52121","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/deab1c9b41ba16b84a2511fcd52c48cf.jpg?v=1786668722"},{"product_id":"bearing-block-l-h-complete-for-x1-x4-and-g-series-internal","title":"SEBO Left-Hand Brush Roll Bearing Block for AUTOMATIC X1, X4, X4 Boost and ESSENTIAL G Series","description":"\u003cp\u003eBearings announce themselves before they fail: a dry rumble that changes pitch with the brush roll, or a roll that can be rocked at one end once the machine is tipped over. SEBO 5766HG is the left-hand bearing block, supplied complete, and it is listed for AUTOMATIC X1, AUTOMATIC X4 and AUTOMATIC X4 Boost uprights and for the ESSENTIAL G1, ESSENTIAL G2, ESSENTIAL G4 and ESSENTIAL G5.\u003c\/p\u003e\u003cp\u003eThis block carries the left spindle of the brush roll and holds it square to the floor. Once worn, the roll no longer turns on a true axis: one end digs into the carpet while the other skims it, the belt begins running off centre, and the extra friction is paid for by the motor. Fitting new blocks at both ends in the same session is the usual approach, because a fresh part working against a worn one leaves the slack exactly where it was, only on the opposite side. Right-hand blocks are trim-specific and carry separate numbers — 5031WE, 5031DR1, 5031GS, 5031SW2 and 5031HG among them — so the pair is ordered as two lines rather than as one kit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachines:\u003c\/strong\u003e AUTOMATIC X1, AUTOMATIC X4 and AUTOMATIC X4 Boost; ESSENTIAL G1, ESSENTIAL G2, ESSENTIAL G4 and ESSENTIAL G5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e left hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5766HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e complete internal bearing block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e inside the power head, at one end of the brush roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorth checking together:\u003c\/strong\u003e belts and roller carry their own numbers, 5110, 5463 and 5010AM, and they do not all span this same list of machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTake the roll out and turn each end by hand before deciding what to buy: anything that feels notchy, or that allows the shaft to move sideways, has finished its service. Left-hand blocks are not common across the whole SEBO range — 5767HG is a different number covering other models — so match by machine rather than by appearance. Searches that arrive here include the part number, a SEBO left hand bearing block, and an ESSENTIAL G4 brush roll bearing. Shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473322746,"sku":"5766HG","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5766HG.jpg?v=1785140234"},{"product_id":"bearing-block-l-h-complete-for-x2-and-x5-internal","title":"SEBO Left-Hand Brush Roll Bearing Block for AUTOMATIC X2 and X5","description":"\u003cp\u003eThe left-hand end of a brush roll turns inside its own bearing block, and on the SEBO AUTOMATIC X2 and the AUTOMATIC X5 that block is part 5767HG. It is the internal left-hand unit, built up at the factory, so housing and bearing surface arrive as one piece rather than as components to press together on the bench.\u003c\/p\u003e\u003cp\u003eWound hair is what finishes these off. Thread and pet hair gather at the exposed shaft end, work past the seal, pack solid inside the bearing and drive out the grease that ought to be in there. The roll then feels notchy when spun by hand, whines under load, or sits fractionally out of line so the drive belt stops running square in its groove. Any of those symptoms alongside an undamaged belt points at the block rather than at the belt or the motor.\u003c\/p\u003e\u003cp\u003eLeft and right are separate castings and neither will stand in for the other. The right-hand side of these machines is served by its own numbers, 5031WE being the white right-hand block, and a second left-hand block is catalogued under 5766HG for different machines in the range — which is exactly why ordering against a part number beats ordering against a description.\u003c\/p\u003e\u003cp\u003eWhile the nozzle is apart, strip the wound debris off both shaft ends and off the roll itself. A new block dropped into a dirty head starts its life under the same attack that killed the last one, and the toothed belt that runs between the sensor and the bearing block deserves a look at the same time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachines:\u003c\/strong\u003e AUTOMATIC X2 and AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder code:\u003c\/strong\u003e 5767HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e left hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e complete internal block, nothing to assemble\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpposite side:\u003c\/strong\u003e 5031WE right-hand bearing block in white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorth ordering alongside:\u003c\/strong\u003e 5110 toothed belt, 5249WE brush cover in white, 5108 felt strip\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO stock; delivery in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473388282,"sku":"5767HG","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5767HG.jpg?v=1785146413"},{"product_id":"bearing-block-r-h-for-370-comfort","title":"SEBO Right-Hand Bearing Block for the 370 COMFORT","description":"\u003cp\u003eA grinding or rumbling note from the right-hand end of the brush roll usually means the bearing block on that side has reached the end of its life. Part 20117ER is the right-hand bearing block for the SEBO 370 COMFORT, the seat the roll turns in.\u003c\/p\u003e\u003cp\u003eThe block is working whenever the roller is, and it sits exactly where hair and fine grit collect once they have worked past the end of the shaft. Worn, it drags on the roll, adds load to the motor and the belt, and lets the roller wobble instead of sweeping evenly across the full width of the nozzle. Left long enough it takes the belt and the roller with it. A new block puts the roll back on a true, quiet seat and takes the extra load off everything driving it.\u003c\/p\u003e\u003cp\u003eThis is the right-hand block specifically, so establish which end the noise is coming from before ordering, or cover both ends if the roller has been in service a long time. It is listed for the 370 COMFORT. Bearing failure is progressive rather than sudden: the roller becomes slightly stiffer to spin by hand, then noisy, then loose, and each stage loads the belt driving it a little more. Catching it at the stiff stage usually saves the belt as well.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: SEBO 370 COMFORT\u003c\/li\u003e\n\u003cli\u003ePosition: right-hand end of the brush roll\u003c\/li\u003e\n\u003cli\u003eReplace when: the roller is noisy, stiff to turn by hand, or has play at the end\u003c\/li\u003e\n\u003cli\u003ePart number: 20117ER\u003c\/li\u003e\n\u003cli\u003eRelated: 20123ER left-hand bearing block cover, 20120ER brush roller release button, 20121 release spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBearings age at much the same rate at both ends, so check the opposite side while the roller is out and clear the wound thread off the shaft before it goes back in. Anyone searching for a SEBO 370 brush roll bearing, a 370 COMFORT bearing block or a noisy brush roller repair part is looking at the right number. Genuine SEBO component, shipped in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473421050,"sku":"20117ER","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/20117ER.jpg?v=1785149120"},{"product_id":"bearing-block-r-h-for-370-electronic-and-et-c","title":"SEBO Right-Hand Brush Roll Bearing Block for ET-C and ELECTRONIC 370","description":"\u003cp\u003eA rumbling, wobbling brush roll usually traces back to the moulded block carrying its shaft. Part 2047 is the right-hand bearing block used in the SEBO ET-C Power Heads and the SEBO ELECTRONIC 370, and its job is to hold one end of the roll at a fixed height so the shaft turns true.\u003c\/p\u003e\u003cp\u003eBlocks take load continuously and eventually wear oval. What you notice is a grinding note under the head, a roll that sits at a slight angle, or a belt that keeps creeping off its pulley because the roll it drives is no longer running parallel to the shaft above it. None of those symptoms announce themselves as a bearing fault, which is why owners often replace two or three belts before looking at the block. The tell is that a fresh belt cures the noise for a fortnight and then the same note returns.\u003c\/p\u003e\u003cp\u003eRenewing it at the same service as the belt is the sensible approach, and 2091 is the mirrored part at the opposite end of the same roll. If one block has worn, the other has done identical work and is worth inspecting while the roll is out. Check the roll shaft ends too: a block that has gone oval will have been letting the shaft move, and a shaft with a visible wear step will chew a new block just as quickly. Where the shaft ends are marked, brush roller 2030ER comes complete with its strip and puts a fresh pair of running surfaces in at the same time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 2047, SEBO brush roll bearing block, right hand\u003c\/li\u003e\n\u003cli\u003eFits: SEBO ET-C Power Heads\u003c\/li\u003e\n\u003cli\u003eFits: SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003eHanding: right-hand side only; the opposite end is part 2091\u003c\/li\u003e\n\u003cli\u003eFunction: locates one end of the brush roll shaft at a fixed height\u003c\/li\u003e\n\u003cli\u003eReplace when: the roll rumbles, sits at an angle, or belts repeatedly walk off the pulley\u003c\/li\u003e\n\u003cli\u003eDrive train part numbers on the same machines: drive belt 2049, motor pulley 2025, brush roller pulley 2458, inner plastic bearing 2467, brush motor with pulley 2241UE\u003c\/li\u003e\n\u003cli\u003eWear items: brush roller with strip 2030ER, brush roller strip 2046\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO component, sold individually; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473453818,"sku":"2047","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/c902e2f6ffae5ccca217d26c26a5f830.jpg?v=1786669956"},{"product_id":"bearing-block-r-h-for-300-and-350-light-gray","title":"SEBO Right-Hand Brush Roll Bearing Block for 300 and 350 Mechanical — Light Gray","description":"\u003cp\u003eWorking as a pair with the block at the opposite end, part 50356HG seats the right-hand end of the brush roller in a SEBO 300 Mechanical or 350 Mechanical. SEBO draws it at position 109 on the parts sheet that covers both machines, which is the quickest way to confirm you are ordering the correct side before the head goes back together.\u003c\/p\u003e\u003cp\u003eA worn right-hand block gives itself away with a growl that rises as the brush loads up on carpet, or with a roller that can be rocked by hand once the sole plate is off. Play at one end never stays at one end. The roller starts running out of square, the belt tracks toward one flange and warms up, and the bristle row wears at an angle so the machine cleans unevenly across its width. Renewing the block restores a square, quiet roller and takes the side load back off the drive.\u003c\/p\u003e\u003cp\u003eBecause both blocks live in the same dust and run the same hours, they usually wear together — inspecting the left-hand block 50355HG at the same visit saves stripping the head twice. Clear hair from the shaft ends before the new block goes on, check belt 5110 for glazing while the roller is out, and refit the light gray brush strip cover 50352HG once the assembly is closed up. The roller itself is 50470ER on the 300 Mechanical and 50471ER on the 350 Mechanical.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 50356HG, genuine SEBO bearing block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide and finish:\u003c\/strong\u003e right hand, light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO 300 Mechanical and SEBO 350 Mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 109\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the head growls under load or the roller rocks in its seat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion part numbers:\u003c\/strong\u003e left-hand block 50355HG, belt 5110, brush strip cover 50352HG, brush rollers 50470ER and 50471ER\u003c\/li\u003e\n\u003cli\u003eFactory SEBO stock held by an authorized dealer; delivery starts within 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473486586,"sku":"50356HG","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/634fd382e22a482d814e427fbcf24fa2.jpg?v=1786669482"},{"product_id":"bearing-block-r-h-complete-for-et-1-and-et-2-gray-black","title":"SEBO Right-Hand Bearing Block for ET-1 and ET-2 Power Heads — Gray Black","description":"\u003cp\u003eA brush roll that squeals at one end, wanders sideways, or takes a moment to come up to speed has usually lost a bearing. Part 2313GS is the right-hand half of that pair in the gray black finish, and it ships complete, so the bearing already sits in its housing and the repair is a swap rather than a press-fit rebuild on the bench.\u003c\/p\u003e\u003cp\u003eSEBO draws this piece at position 105 in the ET 1 \/ ET 2 power head diagram, and at position 105 again in the DART and FELIX diagrams. The failure has a recognisable arc. First comes a rise in running noise that tracks brush speed rather than motor speed, then the belt begins creeping toward one end of its pulley, and finally the roll develops enough play to be rocked visibly in its seat by hand. Left long enough, an out-of-square roll wears its own end cap and starts scrubbing the carpet harder on one side of the opening than the other.\u003c\/p\u003e\u003cp\u003eLook over the opposite end while the roll is out. The left-hand block, part 2314GS in the same finish, carries identical hours and tends to wear on much the same schedule, and doing both at once avoids a second strip-down. Clear wound hair from the roll shaft before reassembly, since that binding loads the bearings every time the head runs. Light gray ET-1 heads take block 2313HG instead, so order by the finish on the head in front of you. Fitment on this gray black block runs across both head widths, which is why one number covers uprights and canisters alike.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits the SEBO FELIX Premium, FELIX 2 Premium, DART, C3.1, AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium\u003c\/li\u003e\n\u003cli\u003eSuits ET-1 as well as ET-2 power heads, switched or unswitched\u003c\/li\u003e\n\u003cli\u003ePart number: 2313GS\u003c\/li\u003e\n\u003cli\u003eRight-hand brush roll bearing block, supplied complete with the bearing seated\u003c\/li\u003e\n\u003cli\u003eFinish: gray black\u003c\/li\u003e\n\u003cli\u003eDiagram position: 105 in the ET 1 \/ ET 2, DART and FELIX parts lists\u003c\/li\u003e\n\u003cli\u003eRelated numbers: 2314GS left-hand block, 2313HG in light gray\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO part. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473552122,"sku":"2313GS","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2313GS_74be7a83-888a-4bc1-812f-9e2c64caf642.jpg?v=1785153960"},{"product_id":"bearing-block-r-h-complete-for-et-1-light-gray","title":"SEBO Right-Hand Bearing Block for Light Gray ET-1 Power Heads","description":"\u003cp\u003eLight gray ET-1 heads use colour-matched bearing hardware, and 2313HG is the right-hand block made for them. The bearing arrives seated in its housing, so nothing has to be pressed together before the roll goes back in, and the job stays within reach of anyone comfortable taking a sole plate off.\u003c\/p\u003e\u003cp\u003eIn the FELIX parts diagram this one is drawn at position 105. Change it when the roll rattles at the right-hand end, when the belt starts tracking off centre, or when the head has picked up a low hum that rises and falls with brush speed rather than with the suction motor. A quick check settles it: lift the roll out, spin each bearing on its own, and feel for roughness or for a housing that lets the bearing turn inside its seat. A sound one runs on smoothly for several seconds after a flick.\u003c\/p\u003e\u003cp\u003eThe left-hand block for the same head is part 2314HG in matching light gray, and it is worth inspecting at the same time because both ends accumulate identical hours. The gray black version of this right-hand block is 2313GS. Clear packed hair from the roll shaft before reassembly and confirm the belt sits central once everything is back together. A roll that runs quietly and coasts for a moment after the head is switched off is seated properly; one that stops dead is still binding somewhere.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits the SEBO FELIX Premium\u003c\/li\u003e\n\u003cli\u003eSuits ET-1 power heads built with or without an on\/off rocker\u003c\/li\u003e\n\u003cli\u003ePart number: 2313HG\u003c\/li\u003e\n\u003cli\u003eComplete right-hand bearing block, bearing already seated in the housing\u003c\/li\u003e\n\u003cli\u003eKeeps the brush roll square to the floor across the width of the opening\u003c\/li\u003e\n\u003cli\u003eFinish: light gray\u003c\/li\u003e\n\u003cli\u003eDiagram position: 105, FELIX parts list\u003c\/li\u003e\n\u003cli\u003eRelated numbers: 2314HG left-hand block, 2313GS in gray black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAuthentic SEBO stock for anyone searching a FELIX Premium brush roll bearing or an ET-1 right-hand bearing block in light gray. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473584890,"sku":"2313HG","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/1d08c8e4dd7901fb8d792ad71316a793.jpg?v=1786668849"},{"product_id":"bearing-block-r-h-for-et-h","title":"SEBO Right Bearing Block for ET-H Power Head","description":"\u003cp\u003eA grinding or rattling note from one end of the roller on an ET-H power head is nearly always the bearing block rather than the roller itself. Part 2751DG is the right-side block: the moulded carrier that captures the brush roller shaft and holds it square inside the nozzle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRight-hand bearing block for the SEBO ET-H power head\u003c\/li\u003e\n\u003cli\u003eLocates and supports one end of the brush roller shaft\u003c\/li\u003e\n\u003cli\u003eCures roller wobble, side drag and uneven brush strip wear\u003c\/li\u003e\n\u003cli\u003eComes out and goes back with the roller lifted from the nozzle\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO component, ordered as 2751DG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOnce the bore wears oval the roller sits low on that side. The brush strips then scuff unevenly, which you can read directly off the roller as one end worn shorter than the other, the belt tracks off centre, and the motor works against the drag all the while. Left long enough, a roller running out of line will chew through belts at a rate that is far more annoying than the original fault.\u003c\/p\u003e\u003cp\u003eChecking it takes a moment with the machine unplugged and the head turned over: grip the roller at the right-hand end and try to move it up and down in its seat. Any perceptible play is the block, not the roller. A block that has cracked rather than worn is usually visible as soon as the roller is lifted out.\u003c\/p\u003e\u003cp\u003eFitting it is a roller-out repair. Lift the brush roller clear, transfer the block, and clean the shaft end and the seat before the new one goes in, since grit packed into the bore is what wore the old block in the first place. Check the roller ends for hair wound tight against the bearing while you have it out.\u003c\/p\u003e\u003cp\u003eInspect the opposite end at the same time, since both ends have seen the same hours, and look over the brush drive belt 2750 while the nozzle is open. Searches for a SEBO ET-H bearing block, an ET-H roller bearing right or genuine SEBO 2751DG land here.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473617658,"sku":"2751DG","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2751DG_a13a9576-69e7-4cb3-9d64-d2e1d0b913a7.jpg?v=1785148539"},{"product_id":"bearing-block-r-h-for-duo-light-gray","title":"SEBO Right-Hand Bearing Block for the Duo, Light Gray","description":"\u003cp\u003eRumble or wobble from the brush's right-hand end is normally the block carrying it, worn oval after enough hours on carpet. Part 3010HG is SEBO's right-hand bearing block for the Duo, moulded in light gray to match the machine, and drawn at position 30 of the parts diagram between the M4 x 10 screws at 29 and the brush housing at 31.\u003c\/p\u003e\u003cp\u003eThe block locates the shaft end and absorbs the side loading that brushing produces. When the seat opens up, the brush drifts out of line, scuffs against the housing and adds drag that the belt and motor have to pay for; left long enough it will mark the housing itself, which is a considerably larger repair. The symptoms worth acting on are a knock that follows brush speed rather than motor speed, visible play when the brush end is lifted by hand, and a brush that has started to polish one edge of its chamber.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3010HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e right hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e light gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 30 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated numbers:\u003c\/strong\u003e 3074HG bearing block LH at 69, 3052HG bearing block assembly LH at 70, 0222 ball bearing 626-2Z at 58, 3030 clamp at 52\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe left-hand side of the machine uses its own numbers, so confirm which end you have stripped down before ordering: SEBO lists 3074HG for the left bearing block and 3052HG for the left bearing block assembly. If the ball bearing 0222 has been running rough, replacing it alongside the block saves a second strip-down, and the clamp 3030 that retains it is a small item worth having on the same order. Searches for a SEBO Duo bearing block, a right hand brush bearing or part 3010HG all arrive here. Genuine SEBO component from an authorized dealer. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473715962,"sku":"3010HG","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/d63fb67e2ec1d4149a44271f3392d403.jpg?v=1786670831"},{"product_id":"bearing-block-r-h-for-x4-and-x5-dark-blue","title":"SEBO Right-Hand Brush Roll Bearing Block for AUTOMATIC X4 and X5 - Dark Blue","description":"\u003cp\u003eColor is part of the part number on this one. Bearing block 5031DB1 is the dark blue version, entered by SEBO at position 122 of the AUTOMATIC X4 X5 parts diagram as the right hand bearing block in dark blue and gray black.\u003c\/p\u003e\u003cp\u003eIt fits the SEBO AUTOMATIC X4 and the SEBO AUTOMATIC X5. The block carries the right end of the brush roll and decides how freely it turns. A rasp on start-up, a roll that wanders sideways in its housing, or a belt that keeps walking off its track normally trace back to a worn block rather than to the roll itself. Hair and fine grit get past the seal, the bore opens up, and from then on the motor is working against drag that should not be there. Lift the roll out, swap the block, and look over the opposite end while everything is apart, since both sides have done the same hours.\u003c\/p\u003e\u003cp\u003eThe left-hand block is a separate number and depends on the machine: 5766HG on the AUTOMATIC X4, 5767HG on the AUTOMATIC X5. Belts 5110 and 5463 drive the roll, with motor pulley 5462 and pulley cover 5112SW behind them, and 5117\/1 covering the sensor and motor pulleys together. Roll itself: 5010AM for the AUTOMATIC X4, brush roller set 5290AM for the AUTOMATIC X5. Dark blue trim parts that match this block are exhaust filter cover 5711DB, exhaust filter catch 5712DB and brush roller release 5713DB, with power head covers 5786AM for the AUTOMATIC X4 and 5796AM for the AUTOMATIC X5.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5031DB1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4 and SEBO AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e dark blue, listed by SEBO as dark blue and gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e right hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 122, AUTOMATIC X4 X5 parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the roll rasps, wobbles by hand, or the belt will not stay centered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 5766HG and 5767HG left-hand blocks, 5110 and 5463 belts, 8366WS brush roller cleaning tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO stock through an authorized dealer, and the right answer for a SEBO brush roll bearing or AUTOMATIC X4 bearing block replacement in dark blue. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473748730,"sku":"5031DB1","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5031DB1_52b68ec2-f76c-4998-a51d-2773659f75dc.jpg?v=1785138809"},{"product_id":"bearing-block-r-h-for-x4-red","title":"SEBO Right-Hand Brush Roll Bearing Block for AUTOMATIC X4 and X4 Boost - Red","description":"\u003cp\u003eRed-trimmed machines take their own version of this component. Part 5031DR1 is the bearing block that carries the right-hand end of the brush roll, finished in red and gray black, recorded at position 122 of SEBO's exploded parts diagram.\u003c\/p\u003e\u003cp\u003eIt fits the SEBO AUTOMATIC X4 and the SEBO AUTOMATIC X4 Boost. Bearing blocks are consumable in a way brush rolls are not. Hair and grit work past the seal, the bore opens up, and the roll begins running rough and noisy long before its bristles are finished. The early signs are a dry rasp that rises with roll speed and a machine that feels like harder work across carpet than it used to. Renewing the block takes a few minutes with the roll already out, and it lifts the extra drag straight back off the motor. Match the color as well as the model when ordering, because this range uses the same design in several finishes and only the matching one is listed for a given machine.\u003c\/p\u003e\u003cp\u003eLeft-hand block 5766HG covers both of these machines, so a pair is easy to order together. The roll runs on belts 5110 and 5463 with motor pulley 5462 behind them, and 8366WS is the tool for cutting hair off the bristles before it reaches the bearing in the first place. Matching red trim includes exhaust filter cover 5711DR, and power head covers are 5778AM and 50778SE on the AUTOMATIC X4 and 50799DR on the AUTOMATIC X4 Boost. Brush rollers 5010AM and 5010GE, the latter in soft bristle, suit both machines.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5031DR1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4 and SEBO AUTOMATIC X4 Boost\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e red, listed by SEBO as red and gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e right hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 122\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the block rasps, the roll has side play, or the belt drifts off center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 5766HG left-hand block, 5010AM and 5010GE brush rollers, 5110 and 5463 belts, 5711DR exhaust filter cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO part from an authorized dealer. The one to order for a red AUTOMATIC X4 bearing block, an X4 Boost brush roll bearing, or a genuine SEBO right-hand bearing block. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473781498,"sku":"5031DR1","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5031DR1_cace603e-faca-49dc-a4e9-a544d521f3bf.jpg?v=1785153056"},{"product_id":"bearing-block-r-h-for-x4-boost-gray-black-graphite","title":"SEBO Right-Hand Brush Roll Bearing Block for AUTOMATIC X4 Boost - Gray Black","description":"\u003cp\u003eSpecified for the graphite-finished machine, 5031GS is the gray black bearing block that seats the right-hand end of the brush roll in the SEBO AUTOMATIC X4 Boost power head. Order by finish as well as by model, since this range shares the design across several colors and only the matching one is listed for a given vacuum.\u003c\/p\u003e\u003cp\u003eThe block supports one end of the roll and holds it parallel to the floor. When the bore has worn out of round, the roll drops slightly at that end, the brushing pattern across the carpet turns uneven, and the belt starts running off center. Left long enough it chews the belt edge and puts a load on the drive that was never designed in. A new block re-seats the roll square and quiets the head down again. Check the left-hand block, 5766HG, at the same time, as both ends have seen identical hours and a block that is only half renewed will still let the roll sit off true.\u003c\/p\u003e\u003cp\u003eEverything else in the head is worth eyeballing while it is open. Brush rollers 5010AM and 5010GE, the second in soft bristle, both suit this machine, belts 5110 and 5463 drive them, and 8366WS is the cleaning tool for stripping wound hair off the bristles. The graphite trim parts that match this block are exhaust filter cover 5711GS, exhaust filter catch 5712GS, brush roller release 5713GS and power head cover 50799GS, with bottom plates 5411GS at the front and 5412GS at the rear.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5031GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4 Boost\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e gray black and graphite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e right hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the head is noisy, the roll wobbles, or a belt will not stay centered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 5766HG left-hand block, 5010AM and 5010GE brush rollers, 5110 and 5463 belts, 5713GS brush roller release\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO stock through an authorized dealer, and the correct number for an AUTOMATIC X4 Boost bearing block or SEBO brush roll bearing in graphite. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473814266,"sku":"5031GS","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5031GS_6912cf13-8a1d-446b-811a-7a51fbb77861.jpg?v=1785154248"},{"product_id":"bearing-block-r-h-for-g-series-light-gray-dark-gray","title":"SEBO Right-Hand Brush Roll Bearing Block for ESSENTIAL G Series - Light Gray and Dark Gray","description":"\u003cp\u003eOwners tracking down a noisy brush roll on an ESSENTIAL G upright normally end up at this part. Number 5031HG is the right hand bearing block in light gray and dark gray, the seat the roll turns in at that end of the power head.\u003c\/p\u003e\u003cp\u003eIt fits the SEBO ESSENTIAL G1, ESSENTIAL G2, ESSENTIAL G4 and ESSENTIAL G5. A block that has worn lets the roll rattle in its housing, and the noise gets worse under load as the bristles bite into carpet rather than skimming it. Side play at that end also pulls the belt off its line, so a machine that keeps throwing or fraying belts is often reporting a bearing fault rather than a belt fault. Because both ends of the roll accumulate the same running hours, it is worth pulling the left-hand block, 5766HG, at the same time and replacing the pair if either shows play.\u003c\/p\u003e\u003cp\u003eWhile the head is open, the drive and consumables are quick to check. Belts 5110 and 5463 turn the roll, motor pulley 5462 and pulley cover 5112SW sit behind them, and 5117\/1 covers the sensor and motor pulleys as a pair. Brush rollers 5010AM and 5010GE, the second in soft bristle, are listed for the ESSENTIAL G1 and ESSENTIAL G4, and 8366WS is the tool for cutting wound hair off any of them. On the filtration side these machines take bag box 5093AM, microfilter 5036AM with HEPA 5812ER and anti-odor 5425AM as alternatives, exhaust filter 2846 behind cover 2820GS, and filter safety catch 5208.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5031HG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO ESSENTIAL G1, ESSENTIAL G2, ESSENTIAL G4 and ESSENTIAL G5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e light gray and dark gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e right hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e remove the brush roll, change the block, refit the roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the roll rattles, runs rough under load, or keeps pulling the belt off line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 5766HG left-hand block, 5110 and 5463 belts, 5010AM brush roller, 8366WS cleaning tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO part supplied by an authorized dealer, and the number behind searches for an ESSENTIAL G4 bearing block, a G series brush roll bearing, or a SEBO right hand bearing block. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473879802,"sku":"5031HG","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/cc43f7b529f6c9b5e3feac998643104c.jpg?v=1786669289"},{"product_id":"bearing-block-r-h-for-x4-black","title":"SEBO Right-Hand Brush Roll Bearing Block for AUTOMATIC X4 - Black","description":"\u003cp\u003eBlack is the finish to order here. Part 5031SW2 carries the right-hand end of the agitator inside a SEBO AUTOMATIC X4, and it is molded in black to match the darker trim on that machine.\u003c\/p\u003e\u003cp\u003eThe block holds the right end of the brush roll and lets it spin with as little drag as it can. Wear announces itself first through the ears, as a dry rasp that rises with roll speed, and then through the handle, as a machine that seems to be working harder across carpet than it used to. What is actually happening is that hair and grit have worked past the seal and opened the bore out, so the roll no longer runs true. Fitting a fresh block quiets the head and takes that load back off the motor. Five minutes with the roll out is all the job takes, and the left-hand block, 5766HG, is worth changing at the same visit since it has done the same hours.\u003c\/p\u003e\u003cp\u003eBlack trim parts for this machine follow the same logic as the block itself, so exhaust filter cover 5711SW, brush roller release 5713SW and power head cover 50783SE are the matching numbers. Brush rollers 5010AM and 5010GE fit, belts 5110 and 5463 drive them, bottom plates are 5411GS at the front and 5412GS at the rear, and 8366WS is the tool for stripping wound hair off the bristles before it reaches the bearing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5031SW2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e right hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the head rasps, the roll wobbles by hand, or the roll binds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 5766HG left-hand block, 5711SW exhaust filter cover, 5713SW brush roller release, 5010AM brush roller\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWe are an authorized SEBO dealer and this block is genuine factory stock, the number to quote for a black AUTOMATIC X4 bearing block or SEBO brush roll bearing. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473912570,"sku":"5031SW2","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5031SW2_f626c45b-1d56-4351-bba6-8a0ae9706216.jpg?v=1785157278"},{"product_id":"bearing-block-r-h-for-x1-x2-x4-and-x5-white","title":"SEBO Right-Hand Brush Roll Bearing Block for AUTOMATIC X1, X2, X4, X4 Boost and X5 - White","description":"\u003cp\u003eGrinding or rumbling from the right end of the roller is the classic sign that this small white block has given up. Part 5031WE carries the right-hand end of the brush roll inside the power head, holding the shaft square while the bristles work the carpet, and it is the widest-fitting version of the block in the range.\u003c\/p\u003e\u003cp\u003eOnce the bearing seat wears oval, the roller develops side play, drags on its belt, and the bristles start wearing down on one edge only. The uneven bristle line is often noticed before the noise is, because the machine simply stops finishing one side of its stroke. A fresh block puts the roller back on center and takes the extra load off the belt and drive. The left-hand block is a separate number and depends on the machine: 5766HG on the AUTOMATIC X1, AUTOMATIC X4 and AUTOMATIC X4 Boost, 5767HG on the AUTOMATIC X2 and AUTOMATIC X5.\u003c\/p\u003e\u003cp\u003eBelt 5110 covers all five of these machines; 5463 is listed for the AUTOMATIC X4, X4 Boost and X5, and 5379 for the AUTOMATIC X1 and X2. Matching white trim runs to exhaust filter cover 5711WE, exhaust filter catch 5712WE and brush roller release 5713WE, with power head covers 5781SE on the AUTOMATIC X4, 50799WE on the AUTOMATIC X4 Boost and 5791SE on the AUTOMATIC X5. Consumables shared across the whole group include bag box 5093AM, exhaust filter 5143, microfilter 5036AM with HEPA 5812ER as the alternative, and service boxes 5827AM and 5828AM.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5031WE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X1, AUTOMATIC X2, AUTOMATIC X4, AUTOMATIC X4 Boost and AUTOMATIC X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e white, as fitted to the light-colored housings in this range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e right hand only, the opposite end takes its own block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e singly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWatch for:\u003c\/strong\u003e rumble under load, a roller that wobbles by hand, uneven bristle wear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 5766HG and 5767HG left-hand blocks, 5110 belt, 8366WS brush roller cleaning tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO stock through an authorized dealer. Parts orders normally ship in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214473945338,"sku":"5031WE","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5031WE_2a1766b4-2c9f-4b16-9c2a-88b08acd1071.jpg?v=1785145934"},{"product_id":"bearing-block-right-hand-for-x7-and-x8-gray-black","title":"SEBO Right-Hand Brush Roller Bearing Block for AUTOMATIC X7 and X8 - Gray Black","description":"\u003cp\u003eA brush roll that rattles or squeals at one end is usually telling you about its bearing block rather than the roll itself. Part 52032GS is the right-hand block in gray black, and it is the seat that the right end of the roller turns in. One part number covers three machines: the AUTOMATIC X7 Premium, the AUTOMATIC X7 Pet and the AUTOMATIC X8.\u003c\/p\u003e\u003cp\u003eHair and grit work their way into a block over the years, and once the bore is scored the roller stops spinning true. That drag shows up as a slower brush, a hotter belt and more noise than the machine ought to make. In the worst cases the roller sits a fraction off centre and scuffs its own housing, which is the point at which a cheap part starts costing money. Clear the roll of wrapped hair while the block is out, check the belt for glazing or cracking, and the repair lasts a great deal longer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 52032GS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e right hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e gray black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X7 Premium, AUTOMATIC X7 Pet and AUTOMATIC X8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 52033ER right-hand roller release ring with spring, 5110 sensor-to-bearing-block belt, 5463 motor-to-sensor belt, 52011ER belt adjuster\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWork with the machine unplugged and laid on its back, and keep the fixings together as they come out. A block that has been running dry usually leaves a polished band on the roller shaft, so inspect the roller end for scoring before deciding the block alone was the whole problem. If the roller release at the same end has felt vague, the ring and spring behind it are worth doing in the same session rather than opening the head twice.\u003c\/p\u003e\u003cp\u003eCommon searches that land here include AUTOMATIC X8 brush roller bearing block, X7 right-hand bearing block replacement, gray black roller bearing housing and genuine SEBO 52032GS. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214474010874,"sku":"52032GS","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/52032GS_f8885a43-0975-483b-894a-fe0946e805a3.jpg?v=1785156187"},{"product_id":"drive-belt-for-370-electronic-and-et-c","title":"SEBO Drive Belt for ET-C Power Heads and ELECTRONIC 370","description":"\u003cp\u003eCarpet pile that stops lifting is the first hint a nozzle belt has stretched. Belt 2049 carries drive from the brush motor pulley across to the brush roll in the SEBO ET-C Power Heads and the SEBO ELECTRONIC 370, and it is sold as a single belt.\u003c\/p\u003e\u003cp\u003eRubber glazes, hardens and loses tension long before it ever snaps, which is why the loss of agitation creeps up unnoticed. A slipping belt lets the roll turn slower than the motor commands, so fine grit stays down in the pile even though the suction at the hose feels perfectly normal. That is the trap with this fault: every test an owner naturally reaches for, hand over the nozzle, hose off the machine, points at a vacuum that is working properly, while the one thing that has failed is the part doing the brushing.\u003c\/p\u003e\u003cp\u003eLook the belt over every time the roll comes out for hair removal and change it at the first sign of shine, cracking or a flattened section. If a new belt fails quickly, the pulley or a bearing block is the more likely culprit rather than the belt itself — a grooved pulley face gives fresh rubber nothing to grip, and a worn block lets the roll run out of line so the belt tracks off its seat.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 2049, SEBO drive belt, sold as one belt\u003c\/li\u003e\n\u003cli\u003eFits: SEBO ET-C Power Heads\u003c\/li\u003e\n\u003cli\u003eFits: SEBO ELECTRONIC 370\u003c\/li\u003e\n\u003cli\u003eFunction: transfers drive from the brush motor pulley to the brush roll\u003c\/li\u003e\n\u003cli\u003eReplace when: agitation drops off, the belt is glazed or cracked, or the roll stalls under load\u003c\/li\u003e\n\u003cli\u003eRelated part numbers: motor pulley 2025, brush roller with strip 2030ER, bearing block 2047\u003c\/li\u003e\n\u003cli\u003eGenuine SEBO rubber, correct length and tension for these nozzles; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214474043642,"sku":"2049","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2049.jpg?v=1785137985"},{"product_id":"drive-belt-motor-to-transmission-for-et-h","title":"SEBO Motor-to-Transmission Drive Belt for the ET-H Power Head","description":"\u003cp\u003eThe ET-H takes its drive in two stages, and part 2749 is the first of them: the belt running from the motor to the transmission. The brush roller itself is turned by a second belt, part 2750, so a head that has lost drive is worth diagnosing before ordering just one.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO ET-H power head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e motor to transmission, the first stage of the drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion belt:\u003c\/strong\u003e 2750, which drives the brush roller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck:\u003c\/strong\u003e inspect it whenever the roller is serviced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e one belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder as:\u003c\/strong\u003e SEBO part 2749\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRubber stretches and hardens whether a machine is worked hard or left in a cupboard for a season, so age counts against a belt as much as use does. Slip at this first stage robs the roller of speed however healthy the motor sounds, and because the loss is gradual it is easy to put down to the carpet rather than the machine. Glazing, fine cracks across the inner face, or a shiny flat section where the belt has been sitting all mean it has had its day.\u003c\/p\u003e\u003cp\u003eA belt that has snapped outright is obvious; one that is merely slipping is not, and the giveaway is a roller that turns freely by hand but slows or stops the moment the head is pressed into carpet. If you are going in for one belt, fit both — the second is a few minutes of extra work and the same teardown either way.\u003c\/p\u003e\u003cp\u003eFitting it means opening the head, so have the roller out and the channel cleaned while everything is accessible. Look over the pulleys the belt runs on at the same time: a groove worn sharp, or filled with rubber dust from the belt that just failed, will shorten the life of the new one considerably.\u003c\/p\u003e\u003cp\u003eCommon searches that land here include SEBO ET-H drive belt, ET-H motor belt replacement and genuine SEBO 2749. Genuine SEBO belt from an authorized dealer, shipped in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214474076410,"sku":"2749","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/d9692075bb39990184286d767cdacf2f.jpg?v=1786670947"},{"product_id":"drive-belt-transmission-to-brush-drive-for-et-h","title":"SEBO Brush Drive Belt for the ET-H Power Head","description":"\u003cp\u003eCarpet pile only lifts if the brush roller is spinning at full speed, and on the SEBO ET-H head that comes down to this belt. Part 2750 is the brush drive belt for the ET-H, sometimes written ETH, power head.\u003c\/p\u003e\u003cp\u003eIt is the second stage of a two-belt drive: 2749 carries power from the motor across to the transmission, and 2750 takes it from there to the roller. Knowing which is which saves a wasted order, because a slipping belt at either stage produces the same lazy roller.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO ET-H and ETH power head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrives:\u003c\/strong\u003e the brush roller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e stretched, cracked or glazed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part:\u003c\/strong\u003e 2749 links the motor to the transmission\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e one belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder as:\u003c\/strong\u003e SEBO part 2750\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBelts stretch by degrees, so the loss of cleaning is gradual and easy to miss until a patch of carpet stops looking any different after a pass over it. Look the belt over every few months while you are clearing hair off the roller, and change it as soon as it shows slack, cracking or a glazed face. A belt you can lift far off its pulley with a fingertip has already stretched past its useful tension. Turning the roller by hand while watching the belt shows up a tired one straight away, since it should drive the roller with no slip and no lag.\u003c\/p\u003e\u003cp\u003eKeeping a spare in the drawer is sensible on a machine used weekly, because a belt tends to give up in the middle of a job rather than politely at the end of one. Having one on the shelf turns a lost afternoon into a five-minute interruption.\u003c\/p\u003e\u003cp\u003eFitting one is a short job with a screwdriver, and it is worth cleaning the pulley grooves and checking the roller bearing block, part 2751DG, at the same time, since a roller that drags will eat a new belt as quickly as it ate the old one. Searches for a SEBO ET-H brush belt, an ETH power head belt or genuine SEBO 2750 end here.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214474240250,"sku":"2750","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/2750.jpg?v=1785148062"},{"product_id":"belt-333-3m-htdii-6-for-et-1-et-2-softcase-and-370-comfort","title":"SEBO Toothed Brush Belt 333 3M HTDII-6 for FELIX, DART, ET-1\/ET-2 and 370 COMFORT","description":"\u003cp\u003eA toothed belt cannot slip the way a smooth one does, which is why SEBO drives its brush rolls through a geared profile rather than a flat rubber loop. Part 2923 is the 333 3M HTDII-6, the same belt the SOFTCASE CE12 parts list records under the heading toothed belt 333 HTD 3M 6. It sits at position 103 on the ET-1\/ET-2, DART and FELIX sheets and at position 125 on the SOFTCASE CE12.\u003c\/p\u003e\u003cp\u003eThis is the one true consumable in the drive train. Everything else in the head is metal or moulded plastic; the belt is rubber, it is under constant tension, and it wears whether the machine is used hard or gently. A stretched belt announces itself as a brush that free-wheels, ticks under load, or gives up altogether in deep pile while the suction motor sounds entirely normal. One that has begun shedding teeth leaves black crumbs of its own inside the head, and a belt that has been run slack long enough will glaze and start to smell hot. Because the geared profile has to mesh, a tired belt also chews the pulley it runs on, so replacing it early is the cheaper decision.\u003c\/p\u003e\u003cp\u003eFull fitment is broad: the SEBO ET-1 and ET-2 power heads in both with-switch and without-switch versions, the FELIX Premium and FELIX 2 Premium, the DART, the 370 COMFORT, the CE12 SOFTCASE, the AIRBELT D4 PREMIUM, the AIRBELT E3 Premium, the AIRBELT K3 PREMIUM and the C3.1. On the 370 COMFORT it pairs with brush pulley 2919ER, and motor pulley 2319 is the driven end on the FELIX Premium, FELIX 2 Premium, DART, 370 COMFORT, AIRBELT D4 PREMIUM, AIRBELT E3 Premium, AIRBELT K3 PREMIUM, C3.1 and both ET heads. Access door 2909VO is the orange flap that has to come off to reach it. Keep a spare on the shelf; this is the part that strands a machine mid-room.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSEBO part 2923 — belt 333 3M HTDII-6, toothed\u003c\/li\u003e\n\u003cli\u003eFits: SEBO ET-1 and ET-2 power heads (with or without switch), FELIX Premium, FELIX 2 Premium, DART, 370 COMFORT, CE12 SOFTCASE, AIRBELT D4 PREMIUM, AIRBELT E3 Premium, AIRBELT K3 PREMIUM and C3.1\u003c\/li\u003e\n\u003cli\u003eParts-diagram positions: 103 (ET-1\/ET-2, DART, FELIX), 125 (SOFTCASE CE12)\u003c\/li\u003e\n\u003cli\u003eType: geared drive belt, so it meshes rather than gripping by friction\u003c\/li\u003e\n\u003cli\u003eTypical symptom: brush free-wheeling, ticking under load, or stalling in deep pile\u003c\/li\u003e\n\u003cli\u003eRelated part numbers: 2919ER brush pulley, 2319 motor pulley, 2909VO access door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine SEBO\u003c\/strong\u003e; ships in 2–5 business days\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214474535162,"sku":"2923","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/0f2340c355f940c6ecec795e4f1492c2.jpg?v=1786668775"},{"product_id":"drive-belt-3mm-for-duo","title":"SEBO 3 mm Drive Belt for the Duo","description":"\u003cp\u003eTwo different drive belts are listed for the SEBO Duo brush machine and they cannot stand in for one another. This is the 3 mm belt, part 3038, drawn at position 37 of the Duo parts diagram in the main body group - close to the 120 V motor 3049ER at position 34, the locking washer 0141 at 35 and the cover 3004SE at 39. The 5 mm belt carries its own number and lives further into the gear group.\u003c\/p\u003e\u003cp\u003eRubber gives up in a predictable order. It stretches first, so the belt slips under load without looking any different. Then the running face glazes and stops keying into the pulley grooves at all. By the last stage there is black dust collecting around the pulleys and the brush is turning noticeably slower than the motor is asking for, even though nothing sounds obviously wrong from the handle. That gap between how the machine sounds and what the brush is actually doing is the symptom worth trusting. A belt is a wear item on any brush machine, and keeping a spare with the vacuum turns a failure into a few minutes of work instead of a few days of waiting.\u003c\/p\u003e\u003cp\u003eWhile the belt is off, it is worth looking at what it runs on. A grooved or glazed pulley will chew through a new belt as quickly as it did the old one.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3038\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3 mm, as designated by SEBO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e rubber drive belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 37 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck at the same time:\u003c\/strong\u003e motor pulley 3014, pulley 3013 and pulley 3009\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is the listing to order from for a SEBO Duo belt replacement, a Duo 3 mm drive belt, or genuine SEBO belt 3038 by part number. Supplied by an authorized dealer, shipping in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214474961146,"sku":"3038","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3022906de9f9573101fa57eb2e4e09c6.jpg?v=1786670879"},{"product_id":"drive-belt-5-mm-for-duo","title":"SEBO 5 mm Drive Belt for the Duo","description":"\u003cp\u003eSEBO designates this one the 5 mm belt. Part 3042 sits at position 54 of the Duo parts diagram, deep in the gear group between the pulley 3013 at 53 and the left-hand-thread gear wheel 3022 at 55, and it is a different item from the 3 mm belt listed separately for the same machine. Ordering by width rather than by number is where most mistakes happen, so take the part number from the diagram.\u003c\/p\u003e\u003cp\u003eThe symptoms build slowly enough to be easy to miss. First the belt stretches and starts to slip under load, so the brush loses speed only when it meets resistance. Then the running face glazes and stops gripping the pulley grooves at all. In the end the brush is barely turning while the motor sounds perfectly healthy, which is exactly the combination that sends people looking for a fault in the wrong half of the machine. Anyone already stripping the drive to reach the pulleys, the gear wheels or the bearing blocks should renew the belt while it is off the machine, because getting back in later costs far more time than the belt itself. Keeping one in the toolbox turns a dead machine into a short job rather than a wait.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 3042\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the SEBO Duo brush machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5 mm, as designated by SEBO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 54 on the SEBO Duo parts diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns between:\u003c\/strong\u003e pulley 3013 at position 53 and gear wheel 3022 at position 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot interchangeable with:\u003c\/strong\u003e the 3 mm Duo belt, which carries its own part number\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA SEBO Duo 5 mm belt, a Duo gear drive belt and SEBO part 3042 all describe this listing. Genuine SEBO belt, dispatched by an authorized dealer in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214475059450,"sku":"3042","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/3042.jpg?v=1785143302"},{"product_id":"drive-belt-for-disco","title":"SEBO Drive Belt for DISCO","description":"\u003cp\u003eA drive that turns slowly, or not at all, while the motor sounds completely normal is the classic sign of a failed belt. SEBO 3221 is the DISCO drive belt, position 29 on that machine's parts diagram, and it is the link between the motor pulley and the drive it turns. Everything upstream of it can be in perfect order and the polisher will still do nothing useful once this one component has let go.\u003c\/p\u003e\u003cp\u003eBelts stretch and glaze long before they part. The change is gradual, so most owners notice the result rather than the cause: the finish takes longer to come up, the machine has to be worked over the same patch twice, and the drive slows under load even though it spins freely with the machine lifted. A glazed belt also squeals as it slips. Because the belt is the simplest item in the drive train to change, it is the sensible first replacement whenever drive speed is in question. With it off, take the opportunity to check the motor pulley, part 3222, for a chewed or grooved face, and look at the belt drive cover 3202GS for cracks while access is easy.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSEBO part number:\u003c\/strong\u003e 3221\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO DISCO floor polisher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 29, SEBO DISCO parts list\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns between:\u003c\/strong\u003e the motor pulley and the drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace when:\u003c\/strong\u003e the drive is slow or stalled, the belt squeals, or the surface is shiny and hard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 3222 motor pulley, 3202GS belt drive cover, 3252ER motor\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA worn belt paired with a worn pulley will destroy the new belt quickly, so fit them together if the pulley face is marked. Searches for a SEBO DISCO belt, a DISCO drive belt replacement or simply 3221 land here. Genuine SEBO belt from an authorized dealer, shipping in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214475124986,"sku":"3221","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/be1f52d586dc694e35f86a813b53801f.jpg?v=1786670693"},{"product_id":"belt-htd-ii-6-219-3m-for-x-and-g-series-and-300-350-sensor-to-bearing-block","title":"SEBO 219 3M HTD-II-6 Toothed Belt for X Series, G Series and 300\/350","description":"\u003cp\u003eToothed rather than flat, the 219 3M HTD-II-6 belt carries drive from the sensor across to the bearing block on SEBO uprights. Part 5110 is the genuine item, and it appears three times in SEBO's own drawings: position 154 on the AUTOMATIC X4\/X5 sheet, position 133 on the AUTOMATIC X7\/X8 sheet, and position 122 on the SEBO 300\/350 Mechanical sheet.\u003c\/p\u003e\u003cp\u003eRubber hardens with age whether a machine is worked daily or left in a cupboard between uses. Watch for teeth that have lost their square edges, cracking across the back of the belt, black dust around the pulleys, a squeal on start-up, or a brush that slows under load on deep carpet. A toothed belt that has begun to skip does not recover, and the missed teeth chew the pulley faces while you wait. Order by the 219 3M HTD-II-6 marking rather than by eye, since a belt of the wrong profile or pitch will either jump under load or run tight enough to load the bearings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e 219 3M HTD-II-6 toothed belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive path:\u003c\/strong\u003e sensor across to bearing block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram positions:\u003c\/strong\u003e 154 on the AUTOMATIC X4\/X5 sheet, 133 on the AUTOMATIC X7\/X8 sheet, 122 on the 300\/350 Mechanical sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X1, X2, X4, X4 Boost, X5, X7 Premium, X7 Pet and X8; ESSENTIAL G1, G2, G4 and G5; 300 MECHANICAL and 350 MECHANICAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e a single belt\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese uprights run two belts, not one. 5110 is the sensor to bearing block belt; the motor to sensor belt is 5463, and changing both at the same visit is the sensible move once either has aged. The pulleys they run on are motor pulley 5462 and sensor pulley 5117\/1. Anyone hunting a SEBO belt replacement for an X series or G series upright should also look at the brush roller while the base is open, since a glazed roller and a tired belt usually arrive together. Genuine SEBO belt, authorized dealer stock, out in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214475157754,"sku":"5110","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5110_9cb0692d-0728-40bf-9c70-e7ad932b399d.jpg?v=1785158277"},{"product_id":"belt-adjuster-complete-for-x7-and-x8","title":"SEBO Complete Belt Adjuster for AUTOMATIC X7 and X8","description":"\u003cp\u003eA brush roll that slows the moment it meets thick carpet is usually a tension problem rather than a motor problem. The belt adjuster, part 52011ER, is the mechanism that holds the drive belt at its working tension on the AUTOMATIC X7 Premium, AUTOMATIC X7 Pet and AUTOMATIC X8, and it is supplied here as one complete unit, listed at position 113 on the AUTOMATIC X7\/X8 exploded diagram.\u003c\/p\u003e\u003cp\u003eAs the adjuster wears, tension drifts low. The belt begins to slip on its pulley under load, slip generates heat, and heat glazes the belt until it can no longer grip at all — so the machine passes through a phase of smelling hot and sounding fine before the brush stops turning altogether. Renewing adjuster and belt together is the usual approach, because a belt rarely comes through the episode that revealed the fault in reusable condition.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 52011ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e complete belt adjuster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob:\u003c\/strong\u003e maintains working tension on the brush drive belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagram position:\u003c\/strong\u003e 113 on the AUTOMATIC X7\/X8 parts breakdown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e AUTOMATIC X7 Premium, AUTOMATIC X7 Pet and AUTOMATIC X8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e the same diagram lists belt 5463 at position 132 and belt 5110 at position 133; motor pulley 5462 sits at position 114\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhile the assembly is out, check the pulley faces for polish and the belt path for stray hair — a belt that has been slipping has often been cutting into whatever wrapped around the shaft. Typical searches that land here are SEBO belt adjuster, AUTOMATIC X7 belt tensioner and X8 brush roller slipping. Ordering the adjuster and a belt at the same time saves opening the machine twice for what is really one repair.\u003c\/p\u003e\u003cp\u003eGenuine SEBO part from an authorized dealer; ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214475190522,"sku":"52011ER","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/bc4ab94d83428c5178d668832957c48b.jpg?v=1786668591"},{"product_id":"belt-312-3m-htdii-6-for-x1-and-x2-motor-to-sensor-and-300-350","title":"SEBO Motor-to-Sensor Drive Belt 312 3M HTDII-6 for AUTOMATIC X1, X2 and 300\/350","description":"\u003cp\u003eToothed, not flat. Part 5379 is the 312 3M HTDII-6 belt that takes drive off the motor's pulley and delivers it to the Sensor unit of a SEBO AUTOMATIC X1 or X2 and on the SEBO 300 MECHANICAL and 350 MECHANICAL uprights.\u003c\/p\u003e\u003cp\u003eThese machines split the drive into two stages, and this belt is the first of them. The HTD tooth form is what makes that arrangement work: the teeth engage the pulley positively, so brush speed holds up under load instead of falling away the way a stretched rubber loop does when the roll digs into deep pile. Wear on a toothed belt looks different from wear on a plain one. The teeth round off at their roots, fine black dust collects around the pulleys, and the belt starts to jump under sudden load. What the owner hears first is usually a regular tick in time with the roll, or notices the brush bogging down on heavy carpet while the motor sounds unchanged. Left long enough, a tooth shears and drive stops altogether.\u003c\/p\u003e\u003cp\u003eBelts are consumables and are best treated as such. Renew this one while the machine is open for any other work in the same area, and look over the second stage at the same time: 5110 is the belt that runs on from the Sensor to the bearing block on these machines, and the pulleys themselves are catalogued as 5117\/1. The Sensor unit that this belt drives is 5382 on the AUTOMATIC X1 and 5383 on the AUTOMATIC X2.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SEBO AUTOMATIC X1 and AUTOMATIC X2; SEBO 300 MECHANICAL and 350 MECHANICAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 5379\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt reference:\u003c\/strong\u003e 312 3M HTDII-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage:\u003c\/strong\u003e first of two, motor across to Sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e toothed HTD profile belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated part numbers:\u003c\/strong\u003e 5110 Sensor-to-bearing-block belt, 5117\/1 pulleys, 5382 and 5383 Sensor assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGenuine SEBO drive belt, shipping in 2–5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214475223290,"sku":"5379","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5379.jpg?v=1785146393"},{"product_id":"belt-2mr-310-6-for-x4-x5-x7-x8-and-g-series-motor-to-sensor","title":"SEBO Toothed Belt 2MR-310-6, Motor to Sensor, for AUTOMATIC X4, X5, X7, X8 and ESSENTIAL G Series","description":"\u003cp\u003eTwo belts turn inside these uprights and this is the smaller one. The 2MR-310-6 runs between the motor pulley and the sensor, sold under order code 5463, drawn at item 153 on the AUTOMATIC X4\/X5 sheet and at item 132 on the AUTOMATIC X7\/X8 sheet, where the pulley cover 5112SW sits beside it at item 131.\u003c\/p\u003e\u003cp\u003eTeeth change the way a belt fails. A flat belt slides quietly through a tight spot and hides the problem; a geared belt either drives in time or jumps, and a jump can be heard from across the room. Tip the machine and look for cracking in the roots between teeth, a polished glaze across the back face, or slack enough that the belt can be lifted clear of its pulley. Any one of the three earns a replacement.\u003c\/p\u003e\u003cp\u003eTiming the job is worth a thought as well. Fit a new belt while the covers are off for other work rather than opening the same machine twice, and inspect the pulley teeth at the same moment, since a rounded pulley will chew through a new belt in short order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder code:\u003c\/strong\u003e 5463\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt:\u003c\/strong\u003e 2MR-310-6, motor to sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUTOMATIC uprights:\u003c\/strong\u003e X4, X4 Boost, X5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso covered:\u003c\/strong\u003e AUTOMATIC X7 Premium, AUTOMATIC X7 Pet, AUTOMATIC X8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESSENTIAL uprights:\u003c\/strong\u003e G1, G2, G4, G5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawn at:\u003c\/strong\u003e item 153 (AUTOMATIC X4\/X5) and item 132 (AUTOMATIC X7\/X8)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns on:\u003c\/strong\u003e motor pulley 5462\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKeep one on the shelf if the machine works daily. A geared belt gives some warning before it lets go, but the warning is short, and a stopped machine waits for the part rather than the other way round.\u003c\/p\u003e\u003cp\u003eSearches for a SEBO 2MR-310-6 geared belt, an AUTOMATIC X4 motor to sensor belt or an ESSENTIAL G drive belt all land on this number. Ships in 2-5 business days.\u003c\/p\u003e","brand":"SEBO","offers":[{"title":"Default Title","offer_id":45214475256058,"sku":"5463","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/files\/5463_dc9f9f54-4b81-4dc9-b49b-660ff31d7ebf.jpg?v=1785156476"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/3934\/3354\/collections\/SEBO.png?v=1707241898","url":"https:\/\/evacuumsandmore.com\/collections\/sebo.oembed?page=9","provider":"Vacuums and More","version":"1.0","type":"link"}