2" PVC Central Vacuum Tubin...
$6.99
Product details
This bundle holds ten lengths of two-inch PVC central vacuum tubing, each running roughly five feet, for fifty feet of pipe total. It is the standard trunk-line size used to run tubing from wall inlets back to the power unit in both new installations and retrofits into finished walls.
Two-inch PVC is the size nearly every residential central vacuum system is built around, so this tubing works for extending an existing run, replacing a damaged section, or laying out a full new installation alongside the fittings, elbows, and mounting plates the job calls for. The smooth interior bore keeps air moving freely and debris from catching at every joint.
Sections join with standard PVC solvent cement and fittings sized for two-inch pipe. Dry-fit a full run before cementing anything, and stagger your joints away from stud bays and floor joists so the finished line has room to be fastened properly along its length.
This bundle is listed as part 829500411 and is sold in complete 50-foot bundles rather than by the individual section, so order the number of bundles your run calls for rather than trying to buy partial lengths. Measuring your planned run and adding a margin for elbows, mounting plates, and the occasional mistake keeps a mid-installation trip back to the store to a minimum.
- Contents: 10 sections of 2-inch PVC tubing, roughly 5 feet each, 50 feet total
- Diameter: 2 inches, standard central vacuum trunk-line size
- Use: new installation runs, retrofit extensions, or replacing damaged sections
- Installation: solvent-welds with standard PVC fittings and cement
