SEBO Right-Hand Bearing Blo...
$18.00
Product details
Light gray ET-1 heads use colour-matched bearing hardware, and 2313HG is the right-hand block made for them. The bearing arrives seated in its housing, so nothing has to be pressed together before the roll goes back in, and the job stays within reach of anyone comfortable taking a sole plate off.
In the FELIX parts diagram this one is drawn at position 105. Change it when the roll rattles at the right-hand end, when the belt starts tracking off centre, or when the head has picked up a low hum that rises and falls with brush speed rather than with the suction motor. A quick check settles it: lift the roll out, spin each bearing on its own, and feel for roughness or for a housing that lets the bearing turn inside its seat. A sound one runs on smoothly for several seconds after a flick.
The left-hand block for the same head is part 2314HG in matching light gray, and it is worth inspecting at the same time because both ends accumulate identical hours. The gray black version of this right-hand block is 2313GS. Clear packed hair from the roll shaft before reassembly and confirm the belt sits central once everything is back together. A roll that runs quietly and coasts for a moment after the head is switched off is seated properly; one that stops dead is still binding somewhere.
- Fits the SEBO FELIX Premium
- Suits ET-1 power heads built with or without an on/off rocker
- Part number: 2313HG
- Complete right-hand bearing block, bearing already seated in the housing
- Keeps the brush roll square to the floor across the width of the opening
- Finish: light gray
- Diagram position: 105, FELIX parts list
- Related numbers: 2314HG left-hand block, 2313GS in gray black
Authentic SEBO stock for anyone searching a FELIX Premium brush roll bearing or an ET-1 right-hand bearing block in light gray. Ships in 2-5 business days.
