Bissell Clean Tank Assembly for CrossWave OmniForce 3882, 3883, 3933

This clean tank assembly, part 164-0767, holds the fresh water and cleaning solution for the Bissell CrossWave OmniForce wet-dry floor cleaner as one complete reservoir unit. It holds the water-and-formula mix and feeds it down to the brush roll as you clean, so the machine can only lay down as much solution as this tank supplies.

A clean tank usually fails at the seams or the cap threads: a hairline crack from being set down hard, a lid that no longer seals evenly, or threads worn round enough to let the tank leak while it is mounted on the machine. Any of those shows up as a wet trail behind the machine, a tank that will not hold pressure, or solution that stops reaching the floor even though the reservoir still has water in it.

• Part: 164-0767 clean tank assembly, complete reservoir unit
• Fits: Bissell CrossWave OmniForce, models 3882, 3883, 3930, 3930F, 3933, 4275F and 4275G
• Function: holds and feeds fresh water and solution to the brush roll

Check the model number printed on your CrossWave before ordering; this tank is shared across the model numbers listed above.

Wipe out the mounting channel before installing the new tank and run a quick test fill with plain water first to confirm the seal holds before adding cleaning solution.