SEBO Right-Hand Brush Rolle...
$6.99
Product details
Clearing wrapped hair from the roller starts with this button. Numbered 52034DB and finished in dark blue to match the AUTOMATIC X8, it is the right-side release that frees the brush roller from its housing and then holds it captive once the roller goes back in.
Buttons crack around the shaft or lose their crisp action, usually after being forced while the roller was jammed with hair or carpet thread. At that stage the roller either will not come out for cleaning or will not seat properly when it does, and neither is worth tolerating on a machine built around quick roller access. The replacement is a single inexpensive part, changed by hand, and it puts the positive click back into the mechanism so you can tell by feel that the roller is home.
- Part number: 52034DB
- Side: right hand
- Colour: dark blue
- Fits: SEBO AUTOMATIC X8
- Related part numbers: 52224DB dark blue left-hand release knob, 52248ER left-hand release ring with spring, 52033ER right-hand release ring with spring, 52032GS right-hand bearing block
If both ends of the roller feel vague rather than just the one, change the ring and spring behind the knob as well, because a worn detent will chew through a new button quickly. Unplug the machine and lay it on its back before starting, and keep the old part beside you until the new one is in so the orientation is obvious. The knob is handed, so a left-hand release will not stand in for it, and the ring and spring behind the knob are a separate item again. Fit the button with the roller out of the way, then refit the roller and check that it locks with a clean click at both ends before the machine goes back on the floor.
Anyone searching for an AUTOMATIC X8 brush roller release knob, a dark blue SEBO roller button, or the number 52034DB is looking at the correct part. Genuine SEBO stock, ships in 2-5 business days.
