SEBO Brush Roller Release f...
$6.99
Product details
Pulling the brush roller out for a hair cleanout starts at the release lock, and on an AUTOMATIC X1 or AUTOMATIC X2 that lock is SEBO 5102GS in gray black. It holds the roller seated and driven while the machine runs, and lets it drop out of the nozzle when the roller needs to come clear.
The lock is flexed at every service, which on a machine in a household with long hair or pets can be monthly. A worn or cracked one goes one of two ways: it stops holding the roller firmly, so the roller can shift in its housing and chew at the belt and end caps, or it seizes up and fights every attempt to free it. Neither is acceptable on a machine where brush access is meant to be a routine two-minute job rather than a wrestling match. A fresh release restores a solid hold and clean single-motion removal.
- SEBO part number 5102GS, brush roller release
- Colour: gray black
- Fits the SEBO AUTOMATIC X1 and AUTOMATIC X2
- Retains the brush roller in the nozzle and releases it for cleaning
- Direct replacement for the original release, no modification needed
- The spring behind the release is SEBO 5103
- Useful alongside it: 8366WS brush roller cleaning tool, 5108 felt strip, 5828AM service box with bags, microfilter, exhaust filter and sealing strip
- Genuine SEBO part from an authorized dealer; ships in 2-5 business days
With the roller out, strip the hair from the end caps and spin it by hand to check the bearings before the new release goes in. It is also the easiest moment to look at the felt strip and the sealing strip in the same nozzle, since both come out with the roller. People searching for a SEBO brush roller release, an Automatic X1 roller lock, an X2 brush release replacement or genuine SEBO 5102GS want this part.
