SEBO Brush Roller Set for the ET-H Power Head

Bristles that have worn short and shiny skate over carpet instead of combing through it, and that is the point at which the rollers in an ET-H power head have finished their working life. SEBO supplies the renewal as a set under part number 2758AM, built the way the head takes it rather than as loose components to be matched up.

Wound hair does the same damage from the opposite direction. A roller with a tight collar of hair at each end turns heavily, drags on the drive and loads its bearings, and the loss shows up as poorer pickup long before anything actually breaks. Slitting the wraps free at every bag change is the single cheapest thing an owner can do for a power head, and it buys a set months of extra service. What it cannot do is put height back into bristles that have already worn down, and that is the job a fresh set does: mechanical grip on the pile that suction on its own never provides.

Judge the set by bristle height rather than by appearance. Rows that sit level with the roller body, filament that has gone soft, or an uneven line of wear across the width all point the same way. Order this one as 2758AM, since SEBO catalogues separate rollers for its other power heads — 5010AM at 12 in. and 2838AM at 15 in. among them — and they are not interchangeable with an ET-H set.

• SEBO part number: 2758AM
• Supplied as: a complete brush roller set for the ET-H power head
• Replace when: the bristle rows are flattened, uneven or shedding filament
• Between changes: cut and lift away wound hair so the rollers turn freely
• Do not substitute: the 12 in. 5010AM and 15 in. 2838AM rollers belong to other SEBO heads
• Genuine SEBO stock from an authorized dealer, ships in 2–5 business days