SEBO Brush Strip with End C...
$23.99
Product details
A Kombi nozzle earns its name by changing character: drop the bristle row and it sweeps hard floors, lift it and the bare lip works carpet. SEBO 7248ER is the replacement row for the 7260GS Premium Kombi floor nozzle, supplied with its end cap.
One strip, one cap — and that count is the first thing to check, because the parquet tool alongside it needs two of each. SEBO lists the 7260GS nozzle at position 40 on the AIRBELT K parts list, immediately beside the 7200GS parquet brush at position 41; the parquet brush takes the two-piece set 7207ER, and the two are not substitutes in either direction. Ordering by tool number rather than by machine is what keeps them straight.
When the row flattens, the hard-floor setting stops sweeping and starts sliding. The nozzle runs lighter across the boards than it did when new, which reads as an improvement until a raking light shows the film of fine dust the airflow never got a purchase on. Press the replacement fully home so the cap sits flush with the end of the channel: a row left standing proud at one end wears at an angle and the sweep goes lopsided from there on. No tools are needed for the swap.
- SEBO part number: 7248ER
- Pack: one bristle strip with its end cap
- Mounts to: the 7260GS Kombi floor nozzle, Premium
- Drawn at: the parent nozzle 7260GS is shown at position 40 on the AIRBELT K parts list
- Fitment: FELIX Premium, FELIX 2 Premium and DART uprights; AIRBELT D1 Turbo, AIRBELT D4 Premium, AIRBELT E1 Kombi, AIRBELT E2 Turbo, AIRBELT E3 Premium, AIRBELT K2 Kombi, AIRBELT K2 Turbo, AIRBELT K3 Premium; C1.1 and C2.1; C3.1
- Not for: the 7200GS parquet brush, which takes the two-piece 7207ER
- Replace when: the bristles are flattened level with the channel or the nozzle skims bare floor without sweeping it
Shoppers reach this row under several names: SEBO Kombi nozzle brush strip, 7260GS brush strip replacement, or the genuine SEBO Kombi bristle insert with cap.
