SEBO Clamp for 300 and 350 ...
$6.99
Product details
Small retaining hardware is what stops a rattle from turning into a repair. Clamp 50147ER, listed at position 4 in SEBO's 300 350 Mechanical parts diagram, is the retainer that pins its mating component to the chassis so nothing shifts while the vacuum is running. It fits the SEBO 300 Mechanical and 350 Mechanical.
Molded clamps stiffen with heat and vibration over the years, and once the jaw has opened up or a locating tab has snapped, whatever it was holding starts to move under airflow and buzz audibly. On a machine used in an occupied building that noise alone is reason enough to fix it, and the movement behind the noise is what eventually chafes a hose or a cable. Fitting the correct clamp puts real tension back on the joint and takes the buzz out. It is cheap enough to keep on the shelf alongside the other small fixings for these uprights.
- Part number: 50147ER
- Diagram position: 4, SEBO 300 350 Mechanical
- Fits: SEBO 300 Mechanical and SEBO 350 Mechanical
- Job: retains a component against the chassis
- Change it when: the jaw has spread, a tab has broken, or the joint rattles
- Sold: individually
The neighboring hardware on the same diagram is worth ordering in the same go, since a stock of small parts saves a second machine-down day: handle tube with cover 50145SE at position 2, connection tube 50105HG at position 9, and the bag lever assembly of 50122OR, axle 50123ER and return spring 50124ER. Where a rattle turns out to be the brush chamber rather than the chassis, look at brush strip cover 50352HG and bearing blocks 50355HG and 50356HG.
Genuine SEBO part from an authorized dealer. Ships in 2-5 business days.
