SEBO Silver Cover Release f...
$20.00
Product details
Shown at position 19 in the AUTOMATIC X7/X8 parts drawing, 51053SB is the silver cover release: the catch you press to free the front cover, and the piece that holds it shut while the machine is running.
Releases fail in two directions. A worn one lets the cover creep open in use, which is how a bag chamber ends up half latched and losing its seal. A stiff or broken one leaves you fighting the door at every bag change until something else gives instead, usually the cover's own latch edge. Either way the fix is the same small part, and swapping it brings back a clean, definite action in both directions rather than the vague push-and-hope that develops with age.
It is worth being honest about which half of the catch has failed before ordering. If the release still springs back briskly but the cover pops open anyway, the wear is more likely to be on the panel's own latch edge; if the release itself feels dead, gritty or has visibly cracked around its pivot, this is the part to change.
- Part number: 51053SB, cover release
- Diagram position: 19 on the AUTOMATIC X7/X8 drawing
- Colour: silver
- Fits: SEBO AUTOMATIC X7 Premium, AUTOMATIC X7 Pet and AUTOMATIC X8
- Symptoms: cover springing open in use, a release that no longer clicks, or one that has to be pressed twice
- Related part: 51059GS is the gray black cap that fits over this release
The release works against the bag housing locking catch 51003SB, and the panel it lets go of is the front cover, which is catalogued by colour: 51051WESB in white, 51051GSSB in graphite, 51051SWSB in black and 51051DBSB in dark blue among them. If the machine is open for a SEBO X7 cover release replacement, the neighbouring items are the handle cover 51052SB, the bag holder 5324 with its spring 5319, and the locking rod 5083 with spring 5084. Genuine SEBO hardware, authorized dealer stock, ships in 2-5 business days.
