Eureka Commercial Power Cord - SC886F, Gray, 50 ft

Part 5237018 is a gray, fifty-foot replacement cord built with an 18-gauge, three-conductor jacket, made to fit a group of Eureka and Sanitaire commercial uprights that share this same cord assembly.

Fifty feet gives a commercial upright the reach to clear a hallway or a large room without chasing an outlet, but that same length means more of the cord takes a beating over its life: crossed by furniture casters, pinched flat in doorways, and looped back onto the storage hooks at the end of every shift. Two signs point to a cord that has had enough: a section of jacket gone stiff and flattened where it keeps getting pinched, or the machine surging and cutting out the moment someone bumps the cord near the plug end.

Exposed copper anywhere along that fifty feet turns a maintenance item into a safety one. Equipment wired that way will not pass a commercial walkthrough inspection, and it puts whoever grabs the cord next at real risk. Cut power at the wall before removing the old cord, and when the new one is stored, coil it loosely rather than in tight loops, since a tight coil is what starts cracking the insulation at the same points shift after shift.

This cord assembly is confirmed for the following Eureka and Sanitaire commercial models: C2094E, C2094F, C2094FB, C2094G, C2094G1, C2094G2, C2094G3, C2094GW, C2094H and C2094H1, plus C2095A, C2133A, C2194A, C2194B, C4046D, C4046E, C4046F, C4046F1, C4047A and HE4046A. Check your machine's own model plate against this list before ordering, since commercial uprights that look alike on the outside are not always wired the same way at the cord entry.

• Part: 5237018
• Length/color: 50 ft, 18/3, gray
• Fits: Eureka/Sanitaire C2094E, C2094F, C2094FB, C2094G, C2094G1, C2094G2, C2094G3, C2094GW, C2094H, C2094H1, C2095A, C2133A, C2194A, C2194B, C4046D, C4046E, C4046F, C4046F1, C4047A, HE4046A
• Replace when: insulation is split, flattened, or the machine cuts out when the cord moves