SEBO Filter Cover for FELIX...
$24.00
Product details
An exhaust filter does its job only for as long as something holds it flat on its seat, and on a FELIX Premium that force comes entirely from the panel covering the filter bay. Part 7091DB is that panel, moulded in dark blue.
These covers give way at the retaining tabs rather than across the middle. A tab lets go partway through a filter change, the panel afterwards stands a fraction away from the bay, and air starts slipping round the edge of the media instead of passing through it. Nothing about the machine changes audibly and suction stays where it was, so the fault announces itself indirectly: fine dust settling again on the surfaces nearest the vacuum, and a filter that rocks under a fingertip with the cover shut.
Sheet reference: the FELIX exploded diagram shows the filter cover at item 17, drawn there in black, dark red and arctic white; 7091DB is the same panel in dark blue. Sitting directly behind it is the exhaust filter at item 41, with the pre-motor filter 7012AM further in at item 42, which makes fresh media the obvious companion order. The remaining Indigo trim parts are the handle release button 7082DB at item 25, the cable hook 7027DB at item 15, the switch assembly 7038DB at item 23 and the lower housing 70166SE at item 19, while the indigo exhaust microfilter with textile is 7095AM39.
- Fitment: SEBO FELIX Premium uprights
- Colour and finish: dark blue, SEBO's Indigo trim shade
- Part number: 7091DB
- Job: loads the exhaust filter down into its bay so exhaust cannot pass round the media
- Replace when: a tab has snapped, the panel is cracked, or the filter moves with the cover closed
- Related part numbers: 7095AM39 exhaust microfilter, 7012AM pre-motor filter, 7090DB hose duct, 7082DB handle release button
Goes on in place of the factory panel with no hardware to change. Genuine SEBO part held by an authorized SEBO dealer, shipped in 2-5 business days.
