SEBO Hose Neck for AIRBELT ...
$10.00
Product details
No contacts, no loom, just a moulded collar and an airtight lock: that is what the AIRBELT D1 Turbo takes at its hose socket, and the gray black part number for it is 8078GS.
The neck is set into the front face of the canister, and the hose end twists home in it. It has to hold that hose against the pull of whoever is cleaning while keeping the junction closed, because anything leaking at this point is air the floor tool never receives. Every drag around a doorframe loads the locking tabs, and in time they craze, chip or lose their detent. What follows is either a hose that pops free under tension, or a whistle at the junction with noticeably weaker suction at the nozzle even though motor, bag and filters are all in good order. One part brings back both the airtight joint and the firm lock.
Handle the hose end itself while the joint is apart. A worn collar and a worn hose cuff produce very similar symptoms, and fitting a new neck onto a cuff that has already gone oval only postpones the same complaint.
- Order code: 8078GS
- Finish: gray black
- Machine: AIRBELT D1 Turbo
- Build: plain collar, no electrical contacts
- Packed inside: complete inside bag cover 8051AM1
- Different part: 8079ER carries wiring and does not interchange with this one
- Change it when: the hose will not lock home, or air whistles at the joint while suction falls at the tool
Check the machine before ordering, since wired and unwired versions look similar from the front. Searches for a SEBO hose neck, an AIRBELT D1 hose connector or a D1 Turbo hose collar replacement all land on this component. Genuine SEBO fitting from an authorized dealership. It leaves us in 2-5 business days.
