SEBO Internal Wiring Cable ...
$8.00
Product details
Inside the DISCO floor polisher, part 3245 is the wiring that moves power from one component to the next. SEBO draws it at position 21 on the machine's parts diagram. This is the internal harness rather than the external mains cord that plugs into the wall, so it is the lead a technician reaches for when the machine has power at the outlet and nothing much beyond it.
Heat and vibration work on internal wiring year after year. Strands fatigue where the cable is repeatedly flexed, terminals back off their tabs, and insulation hardens until it splits at a bend. What the owner sees is a machine with dead spots: it runs, then stops when it is moved a certain way, or refuses to start at all until something is nudged. Chasing that kind of intermittent fault with a meter usually ends at a lead like this one, and a new cable gives a clean, continuous path instead of a marginal connection waiting to fail again. Unplug the machine before opening it, and note the routing of the old cable so the replacement follows the same path clear of moving parts.
- SEBO part number: 3245
- Fits: SEBO DISCO floor polisher
- Diagram position: 21, SEBO DISCO parts list
- Type: internal power lead, not the external supply cord
- Replace when: the machine is intermittent, has dead spots, or the insulation is cracked at a bend
- Related part numbers: 3242ER 120V printed circuit board, 3238 switch lever, 0876ER wiring for swivel neck
The board this wiring serves is 3242ER, the switch lever is 3238, and the swivel neck has its own separate wiring under part number 0876ER. Searches for a SEBO DISCO internal cable, DISCO internal wiring or the number 3245 land here. Genuine SEBO from an authorized dealer, shipping in 2-5 business days.
