SEBO Left Lens for ET-1 and...
$6.99
Product details
Clouded or cracked, a lens is a cosmetic fault that also lets grit reach the front of the nozzle. SKU 20955 is the left-hand lens moulded for the ET-1 and ET-2 power head families in the configuration supplied with no on/off rocker, and it covers the light aperture at the leading corner of the head.
Two details decide whether this is the right ordering choice. The first is side: left and right lenses carry separate part numbers and do not interchange, so set the head down on its sole plate, look at it from the operating position, and work out which corner you are replacing before ordering. The second is switch layout, because heads built with an on/off rocker use different front mouldings and a lens lifted from one will not seat properly in the other. Get either wrong and the new part sits proud of its recess instead of clipping flush, which puts it straight back in the firing line of the next chair leg.
Replacement is usually prompted by a lens gone milky enough to dim the light it sits over, one starred by an impact, or one that has lost a retaining tab and keeps working its way out on corners. Fitting it into a clean recess matters more than it sounds, since grit trapped behind the moulding will crack the next one just as quickly. SEBO also lists this lens against the AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium, all of which are supplied with power heads from the same families, so canister owners can order the same number with confidence.
- Fits ET-1 and ET-2 power heads supplied with no on/off rocker
- Part number: 20955
- Also listed by SEBO for the AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium
- Left-hand side; the right-hand lens is a separate number
- Clear moulded lens, genuine SEBO
- Sold individually
Ships in 2-5 business days.
