Lindhaus LW38 Front and Rear Squeegee Blade Complete

The Lindhaus LW38 eco FORCE relies on a front and rear squeegee bar to dry the floor behind it, and this complete set supplies both, sized to the machine's 38 cm cleaning path. SKU 185350081 ships as two Long-Life bars with the blades already fitted, one for each drying position.

A scrubber-drier only stays walk-ready as long as its squeegee blades hold their edge. Once the rubber nicks, hardens, or rounds off, water stops funneling cleanly into the suction slot and the floor is left streaked or damp behind the machine. Because both bars wear at a similar rate, replacing the set together brings the LW38 back to an even, edge-to-edge dry pass rather than mixing a new blade with a worn one.

At roughly 0.3 kg for the pair, this set is sized to the 38 cm LW38 chassis specifically. Check the model designation on your machine before ordering, since Lindhaus squeegee bars are cut to each chassis width and a set built for a different width will not seat correctly.

Rinse grit off a Long-Life bar periodically and check that it still seats flush in its bracket, since a bar that has worked loose in its mount can cause the same streaking as a worn edge. A loose bar is worth ruling out before assuming the blade itself needs replacing.

• Fits: Lindhaus LW38 eco FORCE
• Includes: two squeegee bars with blades, front and rear
• Width: 38 cm
• Type: Long-Life squeegee bar