MD Central Vacuum Motor Bru...
$17.52
Product details
Part 211CX is a pair of carbon motor brushes for the Lamb Ametek 122556-00 central vacuum motor. MD supplies them as a kit of two identical brushes, because both brushes in a motor wear at close to the same rate and fitting one alone leaves the other due almost immediately.
MD's maintenance guidance is to pull the brushes for a look every couple of years and replace them once they are worn down to three sixteenths of an inch. A motor left running on a fully worn brush arcs against the commutator, which turns an inexpensive pair of brushes into a motor replacement. Loss of power under load and heavier sparking than usual at the brush housing are the symptoms that call for the check.
- Part: carbon motor brush kit, sold as part 211CX
- Kit contents: two identical brushes
- Fits: Lamb Ametek 122556-00 central vacuum motor
- Replace at: three sixteenths of an inch of brush remaining
- Ametek kit number: 833490-77
Ametek publishes 833490-77 as the replacement brush kit for the 122556-00, a 5.7 inch, 240 volt, two-stage motor, and prints that same kit number against its 122039-00, 122059-25, 122060-25, 122101-07, 122402-00 and 122557-00 motors, so those share the same brush size. MD sells this pair for the 122556-00, so confirm the number stamped on your own motor before ordering.
Verified against: MD Central Vacuum data for the 122556-00 motor brush kit, part 211CX

