Nutone 330 Inlet Mounting P...
$7.99
Product details
Behind every Nutone 330 wall inlet sits a mounting plate, the bracket that squares the inlet against the wall and keeps it from shifting. Part CF329 replaces that bracket when it fails. It carries the inlet's full weight and takes the jolt each time a hose gets pushed in or yanked back out over the course of normal use.
It is cut to match the Nutone 330 inlet's mounting pattern specifically, and a broken plate usually shows itself before anything else in the system does. The inlet works loose in its wall opening, the cover stops lining up with the hole behind it, and the hose end pulls free mid-clean instead of staying seated where it belongs.
Once the screw holes crack, the inlet gains enough play that the seal behind it starts to leak, and suction can sag at every inlet sharing that branch line, not just the damaged one. A fresh plate pulls the 330 back square and tight against the wall, and the leak at that station closes. Because the plate sits behind the visible cover, most people never see it until the inlet itself has already started to wobble, so a loose feel at that one wall opening is often the only warning before the leak shows up as weaker suction elsewhere.
- Part: CF329
- Fits: Nutone 330 inlet
- Function: mounting bracket that anchors the inlet to the wall box
- Failure signs: inlet rocks, cover misaligns, hose end works loose during use
Match your old plate against the 330's mounting pattern before ordering, since bracket shapes are specific to the inlet style they serve. If the inlet cover is also worn, swapping both pieces in the same visit usually beats doing the two repairs weeks apart, and leaves that station looking new. Keep the original screws and hardware together as the old plate comes off, so nothing is missing when the new plate goes back against the wall box.
