SEBO ET-2 Power Head Cover ...
$31.00
Product details
FELIX 2 Premium machines running the ET-2 head use this printed white shell, part 2341WESE. The FELIX name is printed across the top, so it is not a visual match for the plain or ET-2 marked versions even though the molding underneath is common to all of them.
The shell is the molded top of the power head. It holds the clip points and screw bosses that let the nozzle close flat while keeping dust off the drive underneath, and it is the surface that meets every baseboard and chair leg in the house. SEBO records it against ET-2 power heads built with the switch, so the switch variant is worth confirming before the order goes in. Replace the cover when a fixing point has cracked, when a corner has broken away, or when the top will not seat down square on the base any more; a shell that has lost its fit lets the housing flex and passes that movement into the belt path.
It is supplied bare. No belt, roller, switch or fixings are included, so those transfer from the head being repaired and the whole job comes down to a screwdriver and a few minutes. If a screw has stripped, SEBO lists its hardware on its own, with screw 3.9 x 13 as 0102 singly and 0102ER in a ten pack, and locking washers as 0141 and 0141ER.
- Part number: 2341WESE
- Color and finish: white, wearing the FELIX print
- Fits: the SEBO FELIX 2 Premium, and ET-2 power heads with the switch
- Supplied as: the shell alone, without internal components
- Print differs from: 2341WEET, the white shell marked with the ET-2 designation
- Plain ET-2 shells: 2341SWET black, 2341DRET red
Typical searches that land here are FELIX 2 Premium power head cover and genuine SEBO ET-2 cover with FELIX print, and both describe this part. Ships in 2-5 business days.
