SEBO Screw 4 x 13 (Tx 20) f...
$6.99
Product details
Sitting below the 16 and 20 mm Torx screws, the 4 x 13 with a Tx 20 recess is the short one, and its fitment list runs right across the SEBO line: the X7 and X8, the G4 and G5, the DART, the SOFTCASE, the 370 COMFORT, the 300 and 350, and the D and E series. Part 1036 is the single-screw order for all of them.
The six-lobe Torx recess is what makes these screws survive repeated servicing, since the driver load is carried around a large contact area rather than on two thin cross flutes. That advantage disappears once the recess has begun to round. Anywhere a machine has been apart more than once the Torx screws are worth inspecting, because one that still drives today will slip at the worst possible moment during the next service, and extracting a spun screw from a plastic boss takes far longer than replacing it early.
- Part number: 1036
- Fits: SEBO X7 and X8, G4 and G5, DART, SOFTCASE, 370 COMFORT, 300 and 350, D and E series
- Drive: Tx 20, six-lobe recess
- Size: 4 mm diameter, 13 mm long
- Sold: each
- Longer screws, same drive: part 1016 at 16 mm and part 1017 at 20 mm
Match the length before ordering, as the 16 mm and 20 mm screws carry the same head and the same drive and cannot be told from this one at a glance. Use a genuine T20 bit rather than an approximate substitute, and stop driving the moment the head seats rather than leaning into the last quarter turn.
Because one screw covers so much of the range, this is the sensible one to keep spares of. A single T20 bit and a few of these cover a brush roll change, a filter housing strip and a hose cuff swap across most of the modern SEBO uprights and canisters listed above, and none of those jobs is improved by discovering halfway through that a fastener has given up.
Searches that lead here include SEBO G5 body screw, SEBO X8 Torx screw, SEBO 370 COMFORT casing fastener and genuine SEBO 4 x 13 Tx 20. Genuine SEBO fastener from an authorized dealer, shipping in 2-5 business days.
