SEBO Mains Cable for C3, K3...
$40.99
Product details
A lead that has been nicked by a door, crushed under a castor or pulled hard at the strain relief is the usual reason a canister trips a breaker, cuts out halfway along a hallway, or refuses to start at all. Part 6369GS is the factory supply lead for the powered hose circuit on the C3, K3 and D4, and fitting a fresh one is a far better outcome than taping over damaged insulation and hoping.
Because the cord feeds a powered hose rather than the canister motor alone, it carries a heavier load than a plain supply lead, and that is exactly why an original-specification part matters here. Conductor gauge, plug and termination all follow the factory item, so it seats in the original strain relief and mates with the connector already on the machine, with nothing improvised. Symptoms that point at the cord rather than at the electronics are worth knowing: power that comes and goes when the lead is moved near the entry point, a breaker that trips as the reel is drawn out to a particular length, visible copper anywhere along the sheath, or a plug that runs warm.
- Part number: 6369GS
- Feeds: the powered hose circuit on SEBO C3, K3 and D4 canisters
- Specification: original mains lead, matched gauge, plug and termination
- Direct replacement for: a worn, cut, crushed or intermittent cord
- Points to it: power dropping out when the cable is flexed, breaker trips, damaged insulation, a warm plug
Anything involving mains wiring is best left to a service technician if you are not comfortable working inside the machine, and the vacuum should be unplugged before the housing is opened either way. A SEBO mains cable, a C3 power cord replacement or a K3 electric hose supply lead is this part. Ships in 2-5 business days.
