Tornado 20 ft Insider Hose ...
$244.99
Product details
Tornado catalogs 1504WDSI as a 20 foot Insider hose assembly, listed among the accessories for its Surge box extractors. An Insider hose runs the vacuum recovery path and the solution line inside a single jacket, so the operator drags one line across a room instead of two that wind around each other underfoot.
Hose takes the hardest use of anything on an extractor. It is pulled over thresholds, run under doors, coiled while still warm from the machine, and stepped on more than any other component across a shift. A jacket that splits along its length, a cuff that weeps, or an assembly that no longer holds solution pressure wastes chemical and starves the wand of the flow it needs, and a soft spot in the jacket tends to get worse under pressure rather than hold steady.
Because the recovery and solution paths share one jacket, a failure on the solution side often shows first as a damp patch along the outside of the hose rather than as an obvious spray, so run a hand along the full length while the machine is under pressure instead of relying on a look alone.
- Length: 20 ft
- Order as: 1504WDSI, Insider-style vacuum and solution hose
- Listed by Tornado for: Surge box extractors
- Before ordering: check this number against the accessory list for your own machine, since Tornado uses different Insider hose numbers across its extractor ranges
A split jacket cannot be patched reliably once it is carrying solution pressure, so a full assembly swap is the standard repair. Tornado also lists a high pressure version of the same 20 foot Insider hose under a separate number, so confirm which of the two your machine calls for.
