Tornado Taskforce 15 Stainl...
$595.00
Product details
Tornado's Taskforce 15, part 94232, holds 15 gallons in an 18 gauge stainless steel tank. Tornado offers the Taskforce range in either a polyethylene or a stainless steel body, and the stainless option is the one to specify where recovery is wet and often chemical: it does not corrode through from the inside the way a tank in constant contact with standing water eventually will, and a wipe-down brings it back to clean rather than leaving a stain behind. The 1.61 HP, 1200 watt motor is the same one used across the range, rated at 114 CFM with 90 inches of water lift.
Liquid and dry pickup on one chassis is what suits this Taskforce to food service, manufacturing floors, and water damage work, where both kinds of mess turn up on the same call rather than on separate visits. A tip-and-pour tank empties liquid without needing a drain hose run, which is quicker on a 52 pound machine than wrestling it to a floor drain, and the 1.5 inch by 10 foot hose with a swivel connector keeps the wand free to move while the tank stays put.
- Tank: 15 gallons, 18 gauge stainless steel, tip and pour
- Motor: 1.61 HP, 1200 watts, 114 CFM, 90 inch water lift
- Hose and cord: 1.5 inch by 10 foot hose with swivel connector, 30 foot cord
- Filtration: washable filter, removed from the float cage for cleaning
- Size and weight: 28 by 21 by 37 inches, 52 pounds
- Part number: 94232
Stainless is worth the difference in a kitchen or wash-down environment where a polyethylene tank was never the failure point but staining and chemical contact are. Empty and rinse after wet pickups rather than leaving standing liquid in the tank between uses, since stainless resists corrosion without being immune to it under a permanent puddle. Pull the washable filter from the float cage on a set interval, rinse it, and let it dry fully before it goes back, and inspect gaskets and seals at the same time since those wear long before the tank body shows any age. Ships to you in 2-5 business days.
