SEBO Hinge for AUTOMATIC X1...
$6.99
Product details
Gray black hinge 5154GS appears as position 129 on SEBO's AUTOMATIC X4/X5 parts diagram, carrying the pivot for the panel it is fitted to. Small hinges of this kind are opened and closed hundreds of times a year, and they tend to break at the pin rather than wear away gradually.
When the hinge goes, the panel it holds either sits loose or comes away in the hand — usually at the worst moment, with the machine half apart. The correct SEBO replacement returns the pivot to its original location, so the panel lines up and latches the way the factory intended instead of being persuaded shut. It is worth fitting the genuine moulding here: a hinge that is even slightly out of position loads its own pin every time the panel closes, and the repair does not last. A hinge that has merely gone stiff is usually fouled with lint rather than broken, so clear the pivot and work it a few times before deciding.
- Part number: 5154GS, sold singly
- Colour: gray black
- Diagram position: 129 in the AUTOMATIC X4/X5 exploded parts diagram
- Fits: SEBO AUTOMATIC X1, X2, X4, X4 Boost and X5
- Other pivot hardware listed for the same models: access door axle 5303, access door spring 5304, complete access door with axle and spring 5172OR
- Fixings: C 2.9 x 9.5 screw 0100 singly or 0100ER for ten; locking washer 0141, or 0141ER as a ten-pack
Anyone searching for a SEBO hinge, an X4 panel pivot or a gray black door hinge is in the right place. While the machine is open, the service box for these models is 5828AM — eight filter bags with a microfilter, an exhaust filter and a sealing strip in one carton, with the exhaust filter also available on its own as 5143. Order two hinges where the drawing for your model shows a pair, since the second one has done the same work as the first. Ships in 2–5 business days.
