SEBO On/Off Foot Pedal for C3.1 Canister — Red

Every start and stop on a C3.1 goes through the foot control moulded into the top of the body, and 6005DR is that control in red.

Press once and the motor runs, press again and it shuts down. All of that force lands on a slim hinge point in the plastic, which is why this pedal ages faster than almost anything else on the canister. The reports are consistent: it feels spongy underfoot, it settles below the level of the trim around it, or the motor wants a second stamp before it picks up. None of that necessarily means the switch beneath has failed, and changing the moulding first is the sensible order of work — a healthy switch behind a broken pedal reads exactly like a dead switch.

• Part number: 6005DR
• Colour: red, matched to the red C3.1 bodywork
• Fits: SEBO C3.1 canister vacuum
• Function: foot-operated power control on the canister body
• Same pedal in white: 6005GW
• Do not confuse with: 6309DR, a separate on/off pedal listing for the earlier C bodies
• The other pedal on the machine: cord rewind 6006DR, also in red
• Matching red C3.1 trim: top casing 6397DR, attachment cover 6383C3

Two pedals sit within an inch of each other on this machine and they are not interchangeable, so check which one you are actually standing on before ordering: the power control runs the motor, while the second releases the cord reel. Searches that land on this page tend to read SEBO on off pedal, C3.1 power pedal replacement, or red SEBO foot pedal. Take the plug out of the wall before you begin, note which way round the old moulding sits in its aperture, and wipe the seat clean so the new pedal drops in square. Genuine SEBO part supplied by an authorized dealership, dispatched in 2–5 business days.