SEBO Brush Cover Release Latch for X2 Uprights - White

Opening the brush compartment on a SEBO X2 depends on one small white latch, and part 5239DG is the replacement for it. Press the latch, the cover unlocks, and the brush roller is right there for clearing hair and thread or fitting a new brush.

The tab is thin by design, because it has to flex in order to work, and it takes the load every single time the cover is opened. Cracks and lost spring tension are therefore ordinary on an older machine rather than exceptional. A worn latch shows itself in one of two ways. It fights the cover on the way in, so the compartment never quite shuts, or it fails to hold at all and lets the cover lift while the vacuum is running, which is both noisy and a good way to lose the cover somewhere between two rooms. Neither is worth tolerating when the fix is a single small moulding that goes in without tools.

There is a maintenance argument here as well as a mechanical one. The brush compartment is meant to be opened often; a roller wrapped with hair and thread agitates carpet poorly and drags on the belt. When the latch makes that job awkward, it stops getting done, and the roller pays for it. Restoring a clean, positive catch is what keeps routine brush maintenance a two-minute habit instead of a chore to be put off.

• Fits: SEBO X2 upright
• Colour: white, as originally fitted
• Function: unlatches the cover over the brush roller
• Replace when: the tab is cracked, or the cover no longer holds shut
• Installation: no tools required
• Part number: 5239DG
• Other finish: the dark gray brush cover release for the X2 is SEBO 5239GS

If the cover itself has cracked rather than just the latch, the grey and white brush roller cover for the X2 is SEBO 5249GW. Genuine SEBO X2 brush cover release, white latch, part 5239DG.