50 ft Light Gray Ultralight Crushproof Hose, 1-3/8" Button-Lock End

This 50-foot ultralight hose locks onto compatible 1-3/8 inch wands with a button-lock curved end rather than a plain friction fit, so tools stay attached with a mechanical catch and release with a press of the button. It is finished in light gray and built with the same reduced-weight wall used across the ultralight line (part 30301).

At 50 feet, weight adds up fast, since every extra ounce of hose gets dragged the full length of the run, and an ultralight wall cuts down on that fatigue compared to a standard-weight hose of the same length. The crushproof corrugation still resists collapsing under a closed door or a rolled-over piece of furniture, so the weight savings do not come at the cost of durability under normal use.

• Length: 50 feet
• Diameter: 1-3/8 inch (35mm)
• Wall: ultralight, crushproof
• End: button-lock curved
• Color: light gray

Button-lock ends will not seat the same way on a friction-fit wand, so check your wand's connection style against this end type before ordering. A button-lock connection that no longer clicks firmly, or one where the tool wobbles even after the button seats, points to a worn catch inside the cuff rather than a fault in the wand itself, and it is usually faster to replace the hose end than to try to service the lock mechanism. Store the hose in a loose coil rather than a tight one so the wall does not take a set that fights you on the next pull.