Clean Obsessed SEBO Central Vac Kit - 35' Direct-Connect Hose, 12" Black Powerhead

Direct-connect wiring runs the show in this Clean Obsessed kit, which pairs a 35-foot DC hose with a black 12-inch powerhead built in the SEBO style, for central vacuum systems that switch the brushroll on through the wall valve. Because the hose wires directly into the inlet's low-voltage contacts, there is no pigtail cord to route and no receptacle to hunt for.

The extra five feet of hose beyond a shorter 30-foot version reaches further rooms and covers split-level layouts with fewer stops between inlets, and because the brushroll takes its signal from the valve itself, inserting the hose is the only step needed to bring it to life.

A powerhead like this drives a rotating brush across the carpet rather than relying on airflow alone to lift dirt, which is the difference between a central vacuum running a plain floor tool and one running a full electric kit. Ground-in soil and pet hair respond to the brush in a way plain suction cannot match.

Confirm your existing inlets are wired for direct-connect power before ordering, since central vacuum systems installed without that low-voltage wiring need a pigtail-style hose instead. Clean Obsessed also builds this kit with a pigtail hose and in a 30-foot length, if your wiring calls for a different setup.

• Hose: 35 ft direct-connect (DC) hose, no pigtail cord
• Powerhead: 12" powerhead, black, built in the SEBO style
• Switching: automatic, powered through the wall valve
• Best for: central vacuum systems wired for direct-connect
• Part: PSB35D