Deluxe TK284 Turbo 30' Low-Voltage Central Vacuum Attachment Kit

A Wessel-Werk TK284 turbo nozzle anchors this 30 foot low-voltage attachment kit, listed under SKU 11176 for use on low-voltage central vacuum installations. The nozzle runs on the vacuum unit's own suction rather than a motor of its own, so there is no cord or switch to wire into the head itself, and nothing to plug in beyond connecting the hose to the wall inlet.

Wessel-Werk builds the TK284 turbine to a 35mm connection, and the turbine is a serviceable assembly in its own right, sold separately when one wears out. Low-voltage hose carries a thin signal wire alongside the airflow path, which is what lets the handle switch turn the central vacuum on and off from wherever you are working. At 30 feet the hose reaches through a mid-size room from a single wall inlet without repositioning mid-clean, though homes with rooms spaced further from each inlet may find a longer hose more practical.

Because the nozzle depends entirely on airflow, its cleaning strength tracks the central vacuum's suction at that inlet rather than any power built into the nozzle. If the nozzle brush spins slowly or stalls on carpet, check for a clogged hose, a full canister or a partly closed inlet valve before assuming the nozzle itself has failed. Confirm your system uses low-voltage inlets rather than direct-connect before ordering, since the two use different hose ends.

• Nozzle: Wessel-Werk TK284 turbo, suction-driven brush roll, 35mm turbine
• Hose: 30 feet, low-voltage, handle-mounted on/off switch
• Fit: standard low-voltage central vacuum inlets; verify your inlet and hose-end style before ordering
• SKU: 11176