Hayden 3-Inlet SuperValve Kit, #1760 Square Door, Almond

This is a three-inlet Hayden SuperValve rough-in kit in almond, and it holds a good deal more than the valves themselves. Alongside three SuperValve inlets it carries the fittings and wire needed to run three drops: three short 90 degree elbows, nine long 90 degree elbows, six 45 degree elbows, six couplings, two 90 degree sweep tees, wire hangers and straps, 80 feet of low-voltage wire, a can of glue, mounting templates and instructions. Pipe is not included and is bought separately.

The SuperValve is Canplas Hayden's direct-connect electric inlet, which means the valve feeds power to the nozzle through the wall plate instead of through a separate pigtail cord dangling at the inlet. The valve seals itself once the hose is pulled free, keeping dust and draughts back out of a tubing, and starts the power unit the moment a hose end seats back in.

The almond finish leans warmer than the white doors in the same line, which suits a home whose trim already runs toward cream or tan. Buying three at once also means every inlet gets installed from one production run, so the tone matches wall to wall instead of drifting between orders placed months apart.

• Inlet count: 3 SuperValve direct-connect inlets
• Fittings: 3 short 90s, 9 long 90s, 6 45s, 6 couplings, 2 sweep tees
• Wire: 80 feet low-voltage, plus hangers and straps
• Also included: glue, templates, instructions
• Not included: pipe
• Finish: almond
• SKU: 3375-11

Before finalizing inlet locations, walk the house with a tape measure and check that a 30 to 35-foot hose reaches comfortably from each candidate spot. That is far easier to correct before the wall is patched than after, and worth doing for all three inlets at once.