Hoover Debris Door Spring -...
$6.99
Product details
This spring, part 38335026, provides the closing tension for the debris door on the Hoover U5162-900 upright, the small hinged flap that must stay shut while the machine runs.
Springs lose tension gradually with heat and repeated cycles, and once this one weakens the door no longer closes with enough force to seal. It can drift open under normal airflow and let collected dirt drop back onto the carpet behind the machine, a symptom people usually pin on the brush roll or a full bag long before they suspect the spring behind it.
This failure hides well since the door appears shut whenever the vacuum sits off, so a quick visual check alone will not catch it. Replacing the spring is a simple swap: unhook the old one, seat the new one in the same mounting points, and the door should snap fully shut again. Test the door's action by hand before closing up the machine, confirming it snaps all the way shut rather than resting only part way.
- Part: 38335026, debris door spring
- Fits: Hoover U5162-900 upright
- Symptom of failure: the door drifts open and drops dirt back onto the carpet
- Install: unhook the old spring, seat the replacement, confirm the door snaps fully shut
