Hoover Duct Cover - U5180-9...
$9.99
Product details
Part 93001689 is the duct cover on the Hoover U5180-900 Fusion upright, a small panel over the internal channel that carries air from the nozzle onward into the machine. Once it cracks or comes loose, that channel stops holding a seal, and air starts drawing in from the gap instead of from the floor.
The symptom is lost pickup at the floor that routine maintenance does not cure, because the fault sits in the housing rather than in anything you empty or wash. A worn seam or a corner tab that has snapped off is often all it takes to open enough of a gap to change how the whole machine performs at the nozzle, and the panel sits where most owners never open the machine far enough to see it. An upright depends on its air path staying sealed through every joint in the housing, and a leak this close to the nozzle costs pickup before the airflow ever reaches the collection side of the machine.
Fitting the replacement closes the channel back up so air is drawn from the nozzle the way it was designed to be, and suction at the floor returns.
- Part: 93001689, Fusion upright duct cover
- Function: seals the internal air channel behind the nozzle
- Fits: Hoover U5180-900 Fusion upright
- Symptom it fixes: weak floor suction that routine cleaning does not restore
Verify U5180-900 on the machine's rating plate before ordering, since this cover is listed specifically for that model. If the old cover cracked after an impact, check the mating edge on the housing for hairline damage before fitting the new panel, since a chipped edge keeps even a new cover from sealing fully.
