Powr-Flite Hose Inlet for 6...
$6.99
Product details
Where the vacuum hose plugs into a 6-quart backpack pack, that moulded port is the hose inlet, part B352-0600.
All day long the hose gets plugged in, twisted free, and reseated, and that repeated handling wears the port itself rather than the hose end fitting into it. Once the inlet cracks or wears thin, air leaks in right at that joint, so the tools pull noticeably less even though the motor and filters check out fine.
Because the leak sits at the connection point rather than anywhere downstream, it is easy to chase filters and motor wear for a while before anyone thinks to check the port the hose actually plugs into. A quick way to test is listening and feeling for airflow at the inlet body itself with the hose disconnected and the machine running. Because the inlet sees more physical stress than almost any other single point on the machine, it is worth a visual check any time the pack is opened for a bag or filter change, even before suction problems show up. Catching a hairline crack early is easier than diagnosing a mystery airflow loss later.
- Part: hose inlet, B352-0600
- Fits: 6-quart backpack vacuums
- Function: port where the vacuum hose connects to the pack body
- Symptom if worn: weak airflow at the tools from suction leaking at the hose joint
Put in the matching inlet seal during the same repair, so the fresh port forms a tight seat against the pack body right away. Order both together if the old inlet shows any cracking at all, since a seal rarely outlasts a damaged port beneath it, and a mismatched pairing tends to fail again within a few months of service.
