Kenmore Canister Lower Cord...
$65.99
Product details
This is the lower wand section on a Kenmore canister vacuum, the pipe that runs from the upper wand down to the floor nozzle and carries the internal cord that powers a motorized nozzle.
Because this wand carries an electrical cord as well as airflow, it can fail in two separate ways. A crack in the tube lets air in and drops suction at the nozzle, while a break in the internal cord cuts power to the nozzle motor even though suction through the hose stays normal. Either fault can show up on its own, so it is worth checking both suction and nozzle power before assuming which one has failed.
- Part: lower cord wand, part 591004256
- Fits: Kenmore canister vacuums using this wand and nozzle system, cataloged under Eureka/Sanitaire E1403EZS045049
- Symptom: reduced suction at the nozzle, or a nozzle that will not power on while hose suction is normal
- Before ordering: compare the connector ends and overall length against your current wand, since wand sections are not interchangeable between systems
Confirm your model before ordering so the electrical contacts on the new wand line up with your existing upper wand and nozzle.
