SEBO Power and Suction Cont...
$6.99
Product details
On an AIRBELT D1 one knob does two jobs — it switches the machine on and off, and it sets the suction — which makes it the single most handled component on the canister. 8202GS is the replacement in gray black, catalogued at position 19 of the AIRBELT D drawing under the heading power knob and suction control.
Nothing electrical goes wrong here; the failure is purely mechanical. Inside the knob is a moulded socket that keys onto the switch shaft, and its edges round off with use until the knob turns without taking the switch with it, or simply lifts off in your fingers. A crack around the collar leaves the same vague, slipping feel. A new one brings back a definite click through each setting and lets suction be dialled in on purpose rather than by guesswork.
The drawing is also useful for telling a knob problem apart from something deeper. Immediately either side of position 19 sit position 18, a spring for the power button listed as 8057, and position 17, the overprinted power display 8038ER2. Further in, SEBO shows a printed circuit board at position 15 as 8102ER and a board with lights at position 52 as 8108ER. If the knob now turns crisply against its stops and the machine still ignores it, the fault has moved past this part and into those. Ordering by number keeps the two situations from being confused.
- Fits: SEBO AIRBELT D1 TURBO
- Part number: 8202GS
- Diagram position: 19 on the AIRBELT D drawing
- Controls: power on and off, plus variable suction
- Colour: gray black — the GS ending SEBO uses through its numbering for that finish
- Supplied as: the knob alone, not the switch or the board beneath it
Genuine SEBO, and it leaves inside 2–5 business days.
