Powr-Flite Front Mount Sque...
$263.99
Product details
FM100H is the front mount squeegee kit Powr-Flite lists for the PF54 wet/dry vacuum, a 26 in. squeegee that mounts to the front of the machine. Pulling water up as the unit rolls forward, rather than chasing it afterward with a hand wand, lets one operator clear a spill or a freshly scrubbed floor without a second pass.
- Part: FM100H
- Fits: Powr-Flite PF54 wet/dry vacuum
- Squeegee width: 26 in.
- Mounting: front mount
Powr-Flite catalogues this kit against the PF54 by name, so confirm the model badge on your own machine rather than going by tank size, since the kit is specified per machine rather than per capacity. The 26 in. squeegee width is the other figure to check, as it sets how wide a path the machine clears on a single pass. A squeegee that starts leaving a thin trailing film rather than a dry floor is the usual sign the rubber has hardened or nicked, and that shows up in the result well before the wear is obvious to look at. Rinsing grit off the squeegee after a wet pickup is the simplest thing that slows it down, since grit trapped along the edge is what cuts into the rubber.
Verified against: Powr-Flite spec sheet for FM100H
