Powr-Flite PFX1080 Carpet E...
$2,399.00
Product details
Powr-Flite built the PFX1080 as a 10 gallon carpet extractor with a 100 PSI solution pump for restorative cleaning work. Solution and recovery are split across two tanks, 10 gallons out and 8 gallons back, and dual two-stage vacuum motors pull a rated 101 CFM at 220 inches of water lift to lift that solution back out of the pile. It is a cold water machine, so heat comes from your solution rather than from an onboard heater.
A machine at this capacity and pressure suits hospitality corridors, guest rooms, office suites and similar commercial spaces where the floor plan breaks into manageable sections. Powr-Flite supplies a 20 foot combined vacuum and solution hose with a 14 inch stainless steel carpet wand, which sets how far a technician works from the machine before it needs repositioning. Ten inch transport wheels plus handle-mounted loading wheels are what make an 85 pound machine practical to get in and out of a van alone.
- Model: PFX1080
- Tanks: 10 gallon solution, 8 gallon recovery
- Pump: 100 PSI, non-heated
- Vacuum: dual two-stage motors, 101 CFM, 220 inch water lift
- Supplied: 20 foot vacuum and solution hose, 14 inch stainless wand
- Weight: 85 pounds on 10 inch transport wheels
An extractor at this pressure and capacity is serviced on a routine tied to hours of use rather than a calendar date, since a machine running daily wears through hoses, seals and the wand's jets faster than one used for occasional touch-ups. Building that check into the route schedule catches wear before it stalls a job midway through a corridor. Flush the solution line with clean water at the end of a run so chemical does not sit in the pump overnight, and drain the recovery tank rather than leaving soil in it between jobs. Ships to you in 2-5 business days.
