ProTeam Switch Box Assembly...
$49.99
Product details
ProTeam's GoFit 6, GoFit 10, GoFit 3, and GoFit 6 Plus backpacks all share the same switch box, cataloged as part 844156. It houses the on/off switch and routes the power lead out of the box, keeping the cord leaving the housing in a controlled line instead of kinking against the edge of the shell.
On a backpack machine the switch box rides at hip level, right where the housing meets doorframes, cart handles, and the occasional drop onto hard flooring. The box takes those knocks so the switch inside does not have to, and a shell that has cracked once tends to keep spreading from the same point every time the machine gets set down. Because the part ships as a complete assembly, a cracked housing and a worn switch get handled in one swap instead of two separate repairs on the same box.
Fit a new box once the switch inside goes soft or stops registering reliably, once the housing has cracked at a mounting point, or once the cord exit has worn and the lead has begun rubbing where it leaves the box. Always pull the plug before opening the housing, and with the box open, look at the condition of the wiring ends before transferring them, since a connector that arrives loose on the new switch will bring an intermittent fault right back.
- Part: 844156, switch box assembly
- Fits: ProTeam GoFit 6, GoFit 10, GoFit 3, GoFit 6 Plus
- Replace when: the switch feels soft or unreliable, the housing has cracked at a mount point, or the cord guide has broken and the lead is chafing
- Install: pull the plug before opening, and confirm the lead seats cleanly at the cord exit before closing up
