PVC Clear Cement, 1/4 Pint with Dauber - Central Vacuum Tubing

The smallest can in the PVC cement lineup is built for jobs that only need a joint or two, not a jobsite's worth. This 1/4 pint of clear solvent cement fuses central vacuum PVC pipe and fittings into a single welded piece, the same chemistry as the larger cans, just sized down for occasional use.

A service technician carrying a kit for spot repairs is the typical buyer here; one small can lasts through dozens of individual joints without taking up much room in a truck bin. The cap's built-in dauber applies cement directly to the pipe and socket surfaces, so no separate brush or applicator is needed on a quick call, and there is nothing extra to clean or store between jobs beyond sealing the can.

It works on 2-inch central vacuum tubing and standard PVC pipe of the same class. Pair with PVC primer wherever the joint needs to hold under vibration or repeated flexing, such as a run near a garage door opener or laundry appliance, and give the joint a quarter turn as the pipe seats to spread the solvent evenly, holding the pieces together for a few seconds so the fresh weld does not creep back apart.

A small can also means less leftover to discard if a job only needs one or two joints, compared with opening a larger can and having most of it go unused before it thickens past the point of a clean weld. Store the can upright and sealed between uses since solvent cement thickens once it starts to evaporate, and work with reasonable ventilation since the solvent fumes are stronger in a closed space than in an open room.

• Part: 33410
• Formula: clear PVC solvent cement
• Can size: 1/4 pint (4 oz), built-in dauber
• Use: 2 inch central vacuum tubing and standard PVC pipe of the same class